Abstract
The influence of cathodic hydrogen charging on some mechanical properties of copper was studied. Hydrogen charging was found to decrease both the ultimate tensile strength and the failure strain of copper. The surface layers of copper were hardened, but they recovered to their prior hardness with time passed after hydrogen charging.
Similar content being viewed by others
References
V. Kerlins, “Metals handbook, Vol. 12, Fractography” 9th Edn (ASM, Metals Park, OH, 1987) p. 13.
J. J. Kim and J. G. Byrne, Mater. Sci. Engng 74 (1985) 201.
A. Kimura and H. K. Birnbaum, Acta Metall. 35 (1987) 1077.
J. W. Watson, Y. Z. Shen and M. Meshii, Metall. Trans. A 19 (1988) 2299.
G. M. Bond, I. M. Robertson and H. K. Birnbaum, Acta Metall. 36 (1988) 2193.
I. O. Shim and J. G. Byrne, Mater. Sci. Engng A 123 (1990) 169.
B. Craig, “Metals handbook, Vol. 13, Corrosion”, 9th Edn (ASM, Metals Park, OH, 1987) p. 145.
J. Eastman, F. Heabaum, T. Mastsumoto and H. K. Birnbaum, Acta Metall. 30 (1982) 1579.
J. Crank, “The mathematics of diffusion”, 2nd Edn (Clarendon Press, Oxford, 1975), p. 48.
D. W. DeWulf and A. J. Bard, J. Electrochem. Soc. 132 (1985) 2965.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Panagopoulos, C.N., Zacharopoulos, N. Cathodic hydrogen charging and mechanical properties of copper. JOURNAL OF MATERIALS SCIENCE 29, 3843–3846 (1994). https://doi.org/10.1007/BF00357357
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00357357