Abstract
Preparation of Au-paste by sol-gel-like reactions from the liquid phase was investigated. The Au-paste thus obtained was a well dispersed colloidal gold. The films sintered from the paste were good metallic conductors. These films showed good resistivity despite the presence of included metal oxides such as titania or zirconia in the matrix. The resistivity of the films thus obtained is about 3.0×10−7Ωm, which is not so different from that of pure gold (2.35 ×10−8Ωm).
Similar content being viewed by others
References
S. Sakka, “Treatise on materials science and technology”, Vol. 22, Glass III (Academic Press, New York 1982) p. 129.
E. Barringer, N. Jubb, B. Fegley, R. L. Pobor and H. K. Bowen, “Ultrastructure processing of glasses, ceramics and composites”, edited by L. L. Hench, D. R. Ulrich, (John Wiley, New York 1984) p. 315.
B. E. Yoldas, J. Mater. Sci. 21 (1986) p. 1080.
Y. Takahashi and Y. Matsuoka, J. Mater. Sci. 23 (1988) p. 2259.
K. Kamiya, T. Nishijima and K. Tanaka, J. Am. Ceram. Soc. 73 (9) (1990) 2750.
K. Kohno, J. Mater. Sci., 27 (1992) 658.
“Merck Index”, 10th Edn, edited by M. Windholz (Merck, Rathway, 1983) p. 650.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kohno, K., Takeda, Y. & Yamamoto, O. Preparation of Au-paste by liquid-phase reaction. JOURNAL OF MATERIALS SCIENCE 28, 2779–2782 (1993). https://doi.org/10.1007/BF00356218
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00356218