Summary
3,3-Diethylthietane has been polymerized by means of the anionic initiators butyl lithium and naphthalene sodium. Linear poly (3,3-diethylthietane) samples have been obtained. The molecular weight of these polymers, measured by GPC, ranges from 70,000 to 241,000. The molecular weight distribution is quite narrow. Calorimetric measurements show a glass transition temperature, extrapolated to zero heating rate, of 236.7 K. The melting curves of a sample isothermally crystallized from the melt at 303 K show two different melting peaks located at 326 and 334 K, respectively. The wide angle X-ray diffractograms for poly (3,3-diethylthietane) crystallized at 303 and 330 K gave identical patterns. Microscopy and small angle light scattering observations show that the supermolecular structure corresponds to ordered spherulites.
Similar content being viewed by others
References
Foldi VS, Sweeney W (1964) Makromol Chem 72: 208
Stille JK, Empen JA (1967) J Polym Sci A1 5: 171
Price, CC, Blair EA (1967) J Polym Sci A1 5: 171
Goethals EJ, Drijvers W, Van Ooteghen D, Buyle AM (1973) J Macromol Sci Chem 7: 1375
Morton M, Kammereck RF, Fetters LJ (1971) Br Polym J 3: 120
Paulet R, Etienne Y (1967) Ind Chim Beige 32 esp: 385
Sánchez A, Bello A, Marco C, Fatou JG, to be published
Lazcano S, Bello A, Marco C, Fatou JG, to be published
Sánchez A, Bello A, Marco C, Fatou JG (1988) Makromol Chem 198: 399
Sánchez A, Marco C, Fatou JG, Bello A (1988) Eur Polym J 24: 355
Lazcano S, Bello A, Marco C, Fatou JG (1988) Eur Polym J 24: 985
Lazcano S, Marco C, Fatou JG, Bello A (1988) Eur Polym J 24: 991
Searles S, Hayes HR, Lutz EF (1962) J Org Chem 27: 2828
Stein RS (1964) New methods of polymer characterization, Ke B (ed), Wiley-Interscience, New York
Mandelkern L, Fatou JG, Denison R, Justin J (1965) J Polym Sci B3:803
Marco C, Lazcano S, Fatou JG, to be published
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lazcano, S., Bello, A., Marco, C. et al. Anionic synthesis and thermal properties of poly(3,3-diethylthietane). Polymer Bulletin 21, 571–576 (1989). https://doi.org/10.1007/BF00264137
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00264137