Summary
The aim of this paper is to report on structural characterization of unsaturated polyester resins modified by grafting elastomer. D.S.C. tests, dynamic mechanical tests and work-hardening rate measurements have been performed. The latter can be regarded as a very sensitive micro mechanical probe of thermoset structure : the work-hardening rate K exhibits appreciable variations with the elastomer wt %.
Similar content being viewed by others
References
C. Bultel, J.M. Lefebvre and B. Escaig, Polymer 24, 476, (1983)
J.M. Lefebvre, C. Bultel and B. Escaig, J. Mater. Sci., accep. for publi. Oct. 83
B. Escaig, “Plastic Deformation of amorphous and semi-crystalline materials”, Ed. by B. Escaig and C. G'Sell, Les Editions de Physique, les Ulis, p. 187 (1982)
C. Bultel, Thèse de 3e cycle, Université de Lille I (1982)
W.D. Cook and O. Delatycki, J. Polym. Sci.: Polym. Phys. Ed. 12 1925, (1974)
K. Tanaka, Bull. Chem. Soc. Japan, 33, 1702, (1960)
J. Martinat, “Design engineering technical Conference”, Cincinnati (Ohio), edited by ASME, (1973)
W.D. Cook and O. Delatycki, J. Polym. Sci.: Polym. Phys. Ed. 12, 2111, (1974).
L.E. Nielsen “Mechanical Properties of Polymers and Composites”, Marcel Dekker, New York, (1974).
J. Heijboer, J. of Polymer Sci.: part C 16, 3755, (1968)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Coulon, G., Lefebvre, J.M. & Escaig, B. Mechanical characterization of structural evolution in modified unsaturated polyester resins. Polymer Bulletin 12, 399–405 (1984). https://doi.org/10.1007/BF00255425
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00255425