Abstract
A summary is given of existing solutions for stress intensity factors for through-the-thickness cracks emanating from circular holes. New solutions are given for some cases of cracks at circular holes in finite plates. The results were obtained by the finite element method with isoparametric eight-noded quarter point elements and the J-integral. Computational problems arising at short cracks are discussed and an approximate method evaluated. The accuracy of the given data is in general within a couple of percent.
Résumé
One donne une synthèse des solutions existantes pour la détermination des facteurs d'intensité des contraintes dans le cas de fissures traversant l'épaisseur et émanant de trous circulaires. De nouvelles solutions sont fournies pour certains cas de fissures amorcées à des trous circulaires dans des plaques finies. Les résultats ont été obtenus par la méthode des éléments finis en utilisant des éléments quart-point isoparamétriques à 8 noeuds, ainsi que par l'intégrale J. Les problèmes de calcul qui se présentent dans le cas de fissures courtes sont discutées et une méthode approximative est examinée. La précision des données fournies est en général de l'ordre de quelques pourcents.
Similar content being viewed by others
References
R. J. Gran, F. D. Orazio, P. C. Paris, G. R. Irwin and R. Hertzberg, Investigation and analysis development of early life aircraft structural failures, Technical Report AFFDL-TR-70–149, Wright-Patterson Air Force Base, Dayton, Ohio (1971).
D. Broek, Cracks at structural holes, Metals and Ceramics Information Cente, Report 75-25, Columbus, ohio (1975).
A. F. GrandtJr, International Journal of Fracture, 11 (1975) 283–294.
J. Bäcklund, S. Sjöström and H. Wennerström, Computer simulation of fatigue crack propagation in aircraft components. International Committee on Aeronautical Fatigue, ICAF Document No 934 and Linköping Institute of Technology, Department of Mechanical Engineering, Report No R 87, Linköping (1977).
R. D. Cook, Concepts and applications of finite element analysis, John Wiley and Sons, New York (1974).
J. P. Benthem and W. T. Koiter, Methods of analysis and solutions of crack problems, Noordhoff International Publishing, Leyden (1973).
H. Å. Jergéus, Private communication, Staal-Laval turbine co, Finspång Sweden.
R. S. Barsoum, International Journal of Fracture, 10 (1974) 603–605.
J. M. Bloom, International Journal of Fracture, 11 (1975) 705–707.
R. D. Henshell and K. G. Shaw, International Journal of Numerical Methods in Engineering, 9 (1975) 495–507.
J. Bäcklund, H. Wennerström and K. Axelsson, PIFEM — a computer program for analysis of elasto-plastic structures (in Swedish), The Swedish Ship Research Foundation, Report No. 125, Göteborg (1976).
A. Karlsson, Stress intensity factors for cracks emanating at holes (in Swedish), SAAB-SCANIA AB Report FKVH RO-3267 and Linköping Institute of Technology, Report No. Ex. 96, Linköping (1977).
J. C. Newman Jr., An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries, NASA Technical Note TND-6376 (1971).
O. L. Bowie, Journal of Math and Physics, 35 (1956) 60–71.
J. Tweed and D.P. Rooke, International Journal of Engineering Science, 14 (1976) 925–933.
Y. C. Hsu, International Journal of Fracture 11 (1975) 571–581.
L. H. Burch and J. R. Rau, International Journal of Fracture, 9 (1973) 43–51.
D. J. Cartwright and G. A. Ratcliffe, International Journal of Fracture Mechanics, 8 (1972) 175–181.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Karlsson, A., Bäcklund, J. Summary of SIF design graphs for cracks emanating from circular holes. Int J Fract 14, 585–596 (1978). https://doi.org/10.1007/BF00115997
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00115997