A method of producing layered, adhesively bonded hydroxyapatite coatings is described. The coatings have a flexible polymeric interlayer which can improve load transfer from the implant to the bone, and a hydroxyapatite-rich surface which can provide mechanical interlocking with the bone. The coatings have been characterized using a number of methods including optical and electron microscopy, mechanical testing and finite element analysis. Some ways in which the coatings could be used to produce orthopaedic implants with improved mechanical and biological compatibility are discussed.
Similar content being viewed by others
References
P. O. Kroon and M. A. Freeman, J. Bone Joint Surg. 74B (1992) 518.
S. D. Cook, K. A. Thomas, J. F. Kay and M. Jarcho Clin. Orthop. 232 (1988) 225.
D. P. Rivero, J. Fox, A. K. Skipor, R. M. Urban and J. O. Galante, J. Biomed. Mater. Res. 22 (1988) 191.
C. P. A. T. Klein, P. Patka, H. B. M. van der Lubbe, J. O. C. Wolke and K. de Groot, J. Biomed. Mater. Res. 25 (1991) 53.
S. L. Evans and P. J. Gregson, British Patent Application 93 00 746.6, January 1993.
S. L. Evans and P. J. Gregson, Mater. Lett. 16 (1993) 270.
S. L. Evans and P. J. Gregson, J. Biomech. (submitted) May 1993.
S. L. Evans, and P. J. Gregson, J. Mater. Sci.: Mater. Med. (in press).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Evans, S.L., Lawes, K.R. & Gregson, P.J. Layered, adhesively bonded hydroxyapatite coatings for orthopaedic implants. J Mater Sci: Mater Med 5, 495–499 (1994). https://doi.org/10.1007/BF00058990
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00058990