Abstract
The need for developing sustainable manufacturing processes are more and more increasing due to environmental regulations that are introduced worldwide. In the field of manufacturing metallic parts, the dry machining process is the effective way to reduce the costs of production and to avoid harm in environment and human health. Especially, Inconel 718 parts, which is very popular in aerospace, chemical, and nuclear industries, produced with additive manufacturing require a finishing process for quality assurance to rough and porous surfaces after printing process. Generally, machining of difficult-to cut materials such as Inconel 718 need the cutting fluids to improve the surface integrity and tool life. The present work investigates the effect of microstructure life of the Inconel 718 part produced by additive manufacturing on the tool compared with the wrought Inconel 718 part during the dry machining. The experimental findings show that the tool life of the Inconel 718 from AM is increased due to the melt pool microstructure formed by the laser irradiation though the hardness is higher than the wrought Inconel 718. Abrasive wear is strongly affected to tool life of the Inconel 718 from AM while adhesive and fracture wear is mostly found in the tool of wrought Inconel 718.
Similar content being viewed by others
Abbreviations
- V :
-
Velocity (m/min)
- s :
-
Surface
- f :
-
Feed rate (mm/rev)
- dp :
-
Radial depth (mm)
- ap :
-
Axial depth (mm)
References
Dornfeld, D. A. (2014). Moving towards green and sustainable manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology,1(1), 63–66. https://doi.org/10.1007/s40684-014-0010-7.
Nowosielski, R., Babilas, R., & Pilarczyk, W. (2007). Sustainable technology as a basis of cleaner production. Journal of Achievements in Materials and Manufacturing Engineering,20(1–2), 527–530.
Fore, S., & Mbohwa, C. T. (2010). Cleaner production for environmental conscious manufacturing in the foundry industry. Journal of Engineering, Design and Technology,8(3), 314–333. https://doi.org/10.1108/17260531011086180.
Schmidt, C., Li, W., Thiede, S., Kara, S., & Herrmann, C. (2015). A methodology for customized prediction of energy consumption in manufacturing industries. International Journal of Precision Engineering and Manufacturing-Green Technology,2(2), 163–172. https://doi.org/10.1007/s40684-015-0021-z.
Ahn, D.-G. (2016). Direct metal additive manufacturing processes and their sustainable applications for green technology: A review. International Journal of Precision Engineering and Manufacturing-Green Technology,3(4), 381–395. https://doi.org/10.1007/s40684-016-0048-9.
Faga, M. G., Priarone, P. C., Robiglio, M., Settineri, L., & Tebaldo, V. (2017). Technological and sustainability implications of dry, near-dry, and wet turning of Ti-6Al-4V alloy. International Journal of Precision Engineering and Manufacturing-Green Technology,4(2), 129–139. https://doi.org/10.1007/s40684-017-0016-z.
Bordin, A., Sartori, S., Bruschi, S., & Ghiotti, A. (2017). Experimental investigation on the feasibility of dry and cryogenic machining as sustainable strategies when turning Ti6Al4V produced by Additive Manufacturing. Journal of Cleaner Production,142(Part 4), 4142–4151. https://doi.org/10.1016/j.jclepro.2016.09.209.
Jinoop, A. N., Subbu, S. K., Paul, C. P., & Palani, I. A. (2019). Post-processing of laser additive manufactured Inconel 718 using laser shock peening. International Journal of Precision Engineering and Manufacturing,20(9), 1621–1628. https://doi.org/10.1007/s12541-019-00147-4.
Singh, T., Dureja, J. S., Dogra, M., & Bhatti, M. S. (2018). Environment friendly machining of Inconel 625 under nano-fluid minimum quantity lubrication (NMQL). International Journal of Precision Engineering and Manufacturing,19(11), 1689–1697. https://doi.org/10.1007/s12541-018-0196-7.
Dudzinski, D., Devillez, A., Moufki, A., Larrouquère, D., Zerrouki, V., & Vigneau, J. (2004). A review of developments towards dry and high speed machining of Inconel 718 alloy. International Journal of Machine Tools and Manufacture,44(4), 439–456. https://doi.org/10.1016/S0890-6955(03)00159-7.
Zhang, H., Deng, Z., Fu, Y., Lv, L., & Yan, C. (2017). A process parameters optimization method of multi-pass dry milling for high efficiency, low energy and low carbon emissions. Journal of Cleaner Production,148(Supplement C), 174–184. https://doi.org/10.1016/j.jclepro.2017.01.077.
Sealy, M. P., Liu, Z. Y., Zhang, D., Guo, Y. B., & Liu, Z. Q. (2016). Energy consumption and modeling in precision hard milling. Journal of Cleaner Production,135(Supplement C), 1591–1601. https://doi.org/10.1016/j.jclepro.2015.10.094.
Polishetty, A., Shunmugavel, M., Goldberg, M., Littlefair, G., & Singh, R. K. (2017). Cutting force and surface finish analysis of machining additive manufactured titanium alloy Ti-6Al-4V. Procedia Manufacturing,7(Supplement C), 284–289. https://doi.org/10.1016/j.promfg.2016.12.071.
Montevecchi, F., Grossi, N., Takagi, H., Scippa, A., Sasahara, H., & Campatelli, G. (2016). Cutting forces analysis in additive manufactured AISI H13 alloy. Procedia CIRP,46(Supplement C), 476–479. https://doi.org/10.1016/j.procir.2016.04.034.
Sartori, S., Bordin, A., Moro, L., Ghiotti, A., & Bruschi, S. (2016). The influence of material properties on the tool crater wear when machining Ti6Al4V produced by additive manufacturing technologies. Procedia CIRP,46(Supplement C), 587–590. https://doi.org/10.1016/j.procir.2016.04.032.
Wang, Q., Zhang, S., Zhang, C.-H., Wu, C.-L., Ren, L., Wang, J.-Q., et al. (2018). Functionally graded stainless steel fabricated by direct laser deposition: Anisotropy of mechanical properties and hardness. Acta Metallurgica Sinica (English Letters),31(1), 19–26. https://doi.org/10.1007/s40195-017-0668-2.
Buchanan, C., Matilainen, V.-P., Salminen, A., & Gardner, L. (2017). Structural performance of additive manufactured metallic material and cross-sections. Journal of Constructional Steel Research,136, 35–48. https://doi.org/10.1016/j.jcsr.2017.05.002.
Guo, P., Zou, B., Huang, C., & Gao, H. (2017). Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition. Journal of Materials Processing Technology,240, 12–22. https://doi.org/10.1016/j.jmatprotec.2016.09.005.
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012). Balling behavior of stainless steel and nickel powder during selective laser melting process. The International Journal of Advanced Manufacturing Technology,59(9), 1025–1035. https://doi.org/10.1007/s00170-011-3566-1.
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., et al. (2015). Review of selective laser melting: Materials and applications. Applied Physics Reviews,2(4), 041101. https://doi.org/10.1063/1.4935926.
Krakhmalev, P., & Yadroitsev, I. (2014). Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures. Intermetallics,46(Supplement C), 147–155. https://doi.org/10.1016/j.intermet.2013.11.012.
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., et al. (2016). Design for Additive manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals,65(2), 737–760. https://doi.org/10.1016/j.cirp.2016.05.004.
Standard ASTM D638, I. A. https://doi.org/10.1520/e0008_e0008m-15a.
Choi, J.-P., Shin, G.-H., Yang, S., Yang, D.-Y., Lee, J.-S., Brochu, M., et al. (2017). Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting. Powder Technology,310, 60–66. https://doi.org/10.1016/j.powtec.2017.01.030.
Acknowledgements
This work was supported by Korea Ministry of Science, ICT & Future Planning (Project: Core Technology Development for 3D Printing Based Small Gas Turbine Engine of Unmanned Vehicles) and Ulsan Metropolitan City and Ministry of Trade, Industry and Energy (Project: AM-based eco-friendly auto parts R&BD).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Park, E., Kim, D.M., Park, H.W. et al. Evaluation of Tool Life in the Dry Machining of Inconel 718 Parts from Additive Manufacturing (AM). Int. J. Precis. Eng. Manuf. 21, 57–65 (2020). https://doi.org/10.1007/s12541-019-00275-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-019-00275-x