Simulation results are compared with experimental data to define the integral breakdown criterion for the spark gaps of the switches of the LTDs with oil insulation and to determine the influence of the inductance of the trigger inductor on the delay of the switch firing. The results confirm that the shape of the output square pulse produced by the oil-insulated LTDs can be corrected as required if the trigger inductors are used to trigger the cavity switches.
Similar content being viewed by others
References
V. M. Alekseenko, V. A. Sinebryukhov, S. N. Volkov, et al., Izv. Vyssh. Uchebn. Zaved. Fiz., 59, No. 9/3, 21–23 (2016).
V. M. Alexeenko, M. G. Mazarakis, A. A. Kim, et al., Phys. Rev. Accel. Beams, 19, 090401 (2016).
V. V. Kremnev and G. A. Mesyats, Methods of Multiplication and Transformation of Pulses in High Current Electronics [in Russian], Nauka, Novosibirsk (1987).
OrCAD Capture CIS 10.5.
A. A. Kim, V. G. Durakov, S. N. Volkov, et al., Izv. Vyssh. Uchebn. Zaved. Fiz., 49, No. 11 Suppl., 297–300 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 9, pp. 83–87, September, 2017.
Rights and permissions
About this article
Cite this article
Alexeenko, V.M., Sinebryukhov, V.A., Kondratiev, S.S. et al. Setting the Delay of the LTD Switch Firing Using Trigger Inductors. Russ Phys J 60, 1553–1558 (2018). https://doi.org/10.1007/s11182-018-1250-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-018-1250-8