Abstract
Laser processing is an effective way for precisely and accurately removing a small region of materials without tool wear. Conventional laser processing, which has a limitation on the processing speed, is performed by scanning a single spot on a target material. For improving its speed, a high-power laser beam can be spatially distributed using a hologram to simultaneously process a two-dimensional area. This technique has been used in experiments such as drilling, patterning, etc. However, as far as we know, due to several difficulties, no experiments have been reported that apply the holographic technique to non-scanning cutting with a single hologram. In this research, we experimentally performed non-scanning 2-D laser cutting of a polyimide film by using a single computer-generated hologram (CGH) and a high-power laser of 120 W. To do this, we designed a CGH to reconstruct twelve lines in a 24 mm × 23 mm area. This was then fabricated with fused silica so that it would not be damaged by the high-power laser. This method makes possible the achievement of a high throughput in a material cutting process by utilizing a high-power laser efficiently.
Similar content being viewed by others
References
D. A. Belforte, “Industrial lasers continue solid revenue growth in 2016”. https://www.industriallasers.com/micromachining/article/16485081/industriallasers-continue-solid-revenue-growth-in-2016 (October 11, 2019).
Y. Hayasaki, T. Sugimoto, A. Takita and N. Nishida, Appl. Phys. Lett. 87, 031101 (2005).
C. Wan. et al., Opt. Eng. 54, 16109 (2015).
Z-Y. Zhan. et al., Appl. Phys. Lett. 109, 21109 (2016).
P. Kunwa. et al., Opt. Mater. Express 6, 946 (2016).
M-Q. Ca. et al., Opt. Lett. 41, 1474 (2016).
M. Sakakur. et al., Opt. Express 18, 12136 (2010).
J. P. Parry, R. J. Beck, J. D. Shephard and D. P. Hand, Appl. Opt. 50, 1779 (2011).
Z. Kuan. et al., Opt. Lasers Eng. 70, 1 (2015).
L. Yan. et al., Opt. Lasers Eng. 70, 26 (2015).
J. Amako, T. Shimoda and K. Umetsu, Proc. SPIE 5339, 475 (2004).
J. J. J. Kaakkunen, P. Laakso and V. Kujanpää, J. Laser Appl. 26, 032008 (2014).
C. Mauclai. et al., Opt. Lasers Eng. 67, 212 (2015).
Technical Information, “LCOS-SLM X10468 series”. http://www.hamamatsu.com/sp/hpe/community/lcos/tech-note/LCOS-SLM-Tech-Info.pdf (October 11, 2019).
R. M. Wood, R. T. Taylor and R. L. Rouse, Opt. Laser Technol. 7, 105 (1975).
Y. Deng and D. Chu, Sci. Rep. 7, 5893 (2017).
B. C. Kress and P. Meyrueis. Applied Digital Optics: From Micro-Optics to Nanophotonics (John Wiley & Sons, Chichester, 2009).
H. Lee, S. Cha, H. K. Ahn and H. J. Kong, Curr. Opt. Photonics 3, 451 (2019).
H. Lee, S. Park, B. G. Jeon and H. J. Kong, Appl. Phys. B 122, 192 (2016).
J. Bengtsson, Appl. Opt. 33, 6879 (1994).
M. T. Gale, M. Rossi, J. Pedersen and H. Schuetz, Opt. Eng. 33, 3556 (1994).
J. Meijer, J. Mater. Process. Technol. 149, 2 (2004).
M. D. Perr. et al., J. Appl. Phys. 85, 6803 (1999).
S. Yılmaz, P. Elahi, H. Kalaycıoˇglu and F. Ö. Ilday, J. Opt. Soc. Am. B 32, 2462 (2015).
Acknowledgments
This work is sponsored by the Civil Military Technology Cooperation Center (CMTC) of Korea under contract 12-DU-EN-01.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, H., Ahn, H.K., Cha, S. et al. Non-scanning 2-D Laser Cutting of Polyimide by Using a Computer-Generated Hologram. J. Korean Phys. Soc. 76, 819–823 (2020). https://doi.org/10.3938/jkps.76.819
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.76.819