Abstract
Floating facilities have been studied based on the static analysis of mooring cables over the past decades. To analyze the floating system of a spherical buoy moored by a cable with a higher accuracy than before, the dynamics of the cables are considered in the construction of the numerical modeling. The cable modeling is established based on a new element frame through which the hydrodynamic loads are expressed efficiently. The accuracy of the cable modeling is verified with an experiment that is conducted by a catenary chain moving in a water tank. In addition, the modeling of a spherical buoy is established with respect to a spherical coordinate in three dimensions, which can suffers the gravity, the variable buoyancy and Froude-Krylov loads. Finally, the numerical modeling for the system of a spherical buoy moored by a cable is established, and a virtual simulation is proceeded with the X- and Y-directional linear waves and the X-directional current. The comparison with the commercial simulation code ProteusDS indicates that the system is accurately analyzed by the numerical modeling. The tensions within the cable, the motions of the system, and the relationship between the motions and waves are illustrated according to the defined sea state. The dynamics of the cables should be considered in analyzing the floating system of a spherical buoy moored by a cable.
Similar content being viewed by others
References
AGARWAL A K, JAIN A K. Dynamic behavior of offshore spar platforms under regular sea waves[J]. Ocean Engineering, 2003, 30(4): 487–516.
UMAR A, DATTA T K. Nonlinear response of a moored buoy[J]. Ocean Engineering, 2003, 30(13): 1625–1646.
JONKMAN J M. Dynamics Modeling and loads analysis of an offshore floating wind turbine[R]. National Renewable Energy Laboratory, Technical Report, NREL/TP-50-41958, 2007.
XU L X, CHEN J Y. Advantages of polyester mooring for deepwater floaters[C]//Proceedings of ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE2014/23976, San Francisco, USA, 2014.
MASCIOLA M, JONKMAN J, ROBERTSON, A. Extending the capabilities of the mooring analysis program: A survey of dynamic mooring line theories for integration into FAST[C]//Proceeding of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE2014/23508, San Francisco, USA, 2014.
OGIHARA K. Theoretical analysis on the transverse motion of a buoy by surface wave[J]. Applied Ocean Research, 1980, 2(2): 51–56.
DRISCOLL F R, NAHON M. Mathematical modeling and simulation of a moored buoy system[C]//Proceedings of OCEANS’96 MTS/IEEE, Fort Lauderdale, USA, 1996, 1: 517–523.
ZHU X Q, YOO W S. Numerical modeling of a spar platform tethered by a mooring cable[J]. Chinese Journal of Mechanical Engineering, 2015, 28(4): 785–792.
HUANG S. Dynamic analysis of three-dimensional marine cable[J]. Ocean Engineering, 1994, 21(6): 587–605.
ETCHMAN J J, LOU Y K. Application of the finite element method to towed cable dynamics[C]//Proceeding MTS/IEEE Oceans, San Diego, USA, 1975, 1: 98–107.
CHUNG J. HULBERT G M. A time integration algorithm for structural dynamic with improved numerical dissipation: the generalize-α method[J]. Journal of Applied Mechanics, 1993, 60(2): 371–375.
CHIOU R. Nonlinear hydrodynamic response of curved singly connected cables[D]. Oregon: Civil Engineering, Oregon State University
ZHU X Q, YOO W S. New construction of reference frame for underwater cable[C]//Proceeding of the ASME 2014 33rd international conference on Ocean, offshore and Arctic Engineering OMAE2014, OMAE2014/24297, San Francisco, USA, 2014.
BUCKHAM B J. Dynamics modeling of low-tension tethers for submerged remotely operated vehicles[D]. Greater Victoria: Department of Mechanical Engineering, University of Victoria, 2003.
BUCKHAM B, NAHON M, SETO M, et al. Dynamics and control of a towed underwater vehicle system, part I: model development[J]. Ocean Engineering, 2003, 30(4): 453–470.
PARBHAKAR S. Dynamics modeling and control of variable length remotely operated vehicle tether[D]. Greater Victoria: Department of Mechanical Engineering, University of Victoria, 2002.
Image System AB, TEMA Automotive User’s Guide[R]. Linkoping: Image System AB, 2009.
FEYNMAN R P, LEIGHTON R B, SANDS M. The Feynman Lectures on Physics[M]. New Millennium Edition. New York: Basic Books, 2013.
FREEDMAN D, PISANI R, PURVES R. Statistics[M]. 4th ed. New York: W.W.Norton&Company, 2007.
ZHU X Q, BAUCHAU O A, YOO W S. Dynamic analysis of mooring cable fastening a floating sphere on the ocean[C]//Proceedings of ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Portland, Oregon, USA, August 4–7, 2013, DETC2013/12693.
WILSON J F. Dynamics of offshore structures[M]. Hoboken: John Wiley Sons, 2003.
DSA PACIFIC, ProteusDS theory and validation[R]. Victoria: Dynamic System Analysis Ltd, 2014.
JOURNEE J M J, MASSIE W W. Offshore hydromechanics[M]. 1st ed. Delft: Delft University of Technology, 2001.
BAI Y. Marine structural design[M]. Oxford: Elsevier Science Ltd, 2003.
HOVER F S, GROSENBAUGH M A, TRIANTAFYLLOU M S. Calculation of dynamic motions and tensions in towed underwater cables[J]. IEEE Journal of Ocean Engineering, 1994, 19(3): 449–457.
CHOO Y. Hydrodynamic resistance of towed cables[J]. Journal of Hydronautics, 1971, 5(4):126–131.
BOAS M L. Mathematical methods in the physical sciences[M]. Wiley, 2006.
ZWILLINGER D. CRC Standard Mathematic Tables and Formulae[M]. 31th Edition. London: Chapman & Hall/CRC Press LLC, 2003.
ANSYS. Engineering analysis system theoretical manual[M]. Cecil Township: Swanson Analysis Systems, 1987.
DSA PACIFIC. ProteusDS 2013 manual[R]. Victoria: Dynamic System Analysis Ltd, 2013.
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by Human Resources Development Program of Korea Institute of Energy Technology Evaluation and Planning(KETEP), Ministry of Trade, Industry and Energy of Korea(Grant No. 20134030200290)
ZHU Xiangqian, born in 1987, is currently a PhD candidate at Computer Aided Engineering Laboratory, Pusan National University, Republic of Korea. He received his master degree from Pusan National University, Korea, in 2010. His research interests include dynamics of flexible multibody system, ocean engineering, and numerical modeling of floating platform.
YOO Wan-Suk, born in 1954, is currently a professor and a director at NRL(National Research Laboratory) of Computer Aided Engineering, Pusan National University, Republic of Korea. His main research interests include dynamics of flexible multibody system, vehicle dynamics, dynamics simulation and application.
Rights and permissions
About this article
Cite this article
Zhu, X., Yoo, WS. Numerical modeling of a spherical buoy moored by a cable in three dimensions. Chin. J. Mech. Eng. 29, 588–597 (2016). https://doi.org/10.3901/CJME.2016.0204.021
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3901/CJME.2016.0204.021