Abstract
Preproduction may be facilitated by computer-assisted design (CAD) of industrial processes. Assessments of CAD efficiency generally rely on characteristics that cannot readily be formalized for the system as a whole and are only applicable to individual CAD functions. Mathematical models of components consisting of a set of initial elements M and the corresponding relations R between them are listed. Geometric models of manufactured goods are considered. The determination of relations between the stages of process design is outlined.
Similar content being viewed by others
REFERENCES
Kalyakulin, S.Yu., Algorithm for calculating the parameters of the initial blank in the SITEP MO automated design system, Russ. Eng. Res., 2014, vol. 34, no. 11, pp. 713–715.
Kalyakulin, S.Yu., Algorithm for calculating the parameters of the initial blank in the SITEP MO automated design system, Stanki Instrum., 2014, no. 4, pp. 17–19.
Kuz’min, V.V. and Kalyakulin, S.Yu., Information processing during automated calculation of technological parameters, Avtom. Sovrem. Tekhnol., 2015, no. 9, pp. 13–16.
Kuz’min, V.V. and Kalyakulin, S.Yu., Automated calculation of technological parameters in CAD software, Spravochnik. Inzh. Zh., 2015, no. 10, pp. 32–34.
Kuznetsov, P.M. and Khoroshko, L.L., Digitization of crushing and milling equipment recoditioning, Gorn. Inf.-Anal. Byull., 2019, no. 10, pp. 195–205.
Tsyrkov, A.V., Kuznetsov, P.M., Tsyrkov, G.A., et al., Project and operation management of machine engineering production, Vestn. Mordovsk. Univ., 2018, vol. 28, no. 4, pp. 511–522.
Kalyakulin, S.Yu., Kuz’min, V.V., Mitin, E.V., and Sul’din, S.P., Informational relational models for calculating the cutting conditions in automatic control systems, Russ. Eng. Res., 2018, vol. 38, no. 12, pp. 1049–1052.
Kalyakulin, S.Yu., Kuz’min, V.V., Mitin, E.V., et al., Designing the structure of technological processes based on synthesis, Vestn. Mordovsk. Univ., 2018, vol. 28, no. 1, pp. 77–84.
Kalyakulin, S.Yu., Kuz’min, V.V., Mitin, E.V., et al., Development of a mathematical model of a part based on graphic system models, Inzh. Tekhnol. Sist., 2019, vol. 29, no. 1, pp. 67–76.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kalyakulin, S.Y., Kuz’min, V.V., Kuznetsov, P.M. et al. Mathematical Design of Industrial Processes. Russ. Engin. Res. 40, 1045–1047 (2020). https://doi.org/10.3103/S1068798X20120060
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20120060