Abstract
A method of designing electron guns based on the method of parametric analysis and optimization is offered. The criteria of selection of variable parameters—the radius of the spherical surface of the gate electrode and the position of the center of the sphere with respect to the cathode—have been justified. It has been proven that taking due account of the technical limitations of materials and the chosen design allows reducing the task of designing the electron gun to the classical optimization problem. An example of calculating the characteristics of the prototype electron gun using the proposed method is given. Analysis of the results of computational experiments has allowed recommendations to be worked out for the developers of welding electron beam guns in the form of parametric dependences and design algorithms.
Similar content being viewed by others
References
Murav’ev, A.G., Mathematical Simulation for electron guns with arbitrary shape cathode, Extended Abstract of Cand. Sci. (Phys.-Math.) Dissertation, Moscow: Moscow Institute of Physics and Technology (State Univ.), 2001.
Filachev, A.M., Andreev, S.V., Beluga, I.Sh., Gaidukova, I.S., Monastyrskii, M.A., Murav’ev, A.G., and Tarasov, V.A., The way to develop calculation methods and application programs for simulating electron-beam technological plants, Prikl. Fiz., 1998, no. 2, pp. 5–18.
Kaidalov, A.A. and Istomin, E.I., Svarochnye elektronnye pushki (inzhenerno-tekhnicheskoe opisanie i instruktsiya po ekspluatatsii svarochnykh elektronnykh pushek UL-119, ELA-15, ELA-30, ELA-60/60, ELA-60B) (Welding Electron Guns. Engineering-Technical Description and User’s Manual for Welding Electron Guns of UL-119, ELA-15, ELA-30, ELA-60/60, ELA-60B Types), Kiev: STC “Paton Welding Institute”, 2003.
Nazarenko, O.K., Kaidalov, A.A., Kovbasenko, S.N., et al., Elektronno-luchevaya svarka (Electron-Beam Welding), Paton, B.E., Ed., Kiev: Nauk. Dumka, 1987.
Hawkes, P.W., Electron Optics and Electron Microscopy, Taylor and Francis, 1972.
Lastovirya, V.N., Oborudovanie dlya obrabotki materialov elektronnym puchkom (osnovnye printsipy postroeniya). Uchebnoe posobie (Equipment for Materials Processing by Electron Beam. General Design Principles. Student’s Book), Moscow: National Research University “MPEI”, 1997.
Zhigarev, A.A., Elektronnaya optika i elektronnoluchevye pribory. Uchebnik dlya vtuzov (Electron Optics and Electron-Beam Devices. Student’s Book for Technical Universities), Moscow: Vysshaya shkola, 1972.
Rai, R., Palmer, T.A., Elmer, J.W., and Debroy, T., Heat transfer and fluid flow during electron beam welding of 304l stainless steel alloy, Welding J., 2009, vol. 88, pp. 54–61.
Rykalin, N.N, Zuev, I.V., and Uglov, A.A., Osnovy elektronno-luchevoi obrabotki materialov (Foundations of Materials Electron-Beam Processing), Moscow: Mashinostroenie, 1978.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Shcherbakov, M.V. Ivashchenko, A.S. Kozhechenko, M.S. Gribkov, 2016, published in Elektrotekhnika, 2016, No. 1, pp. 44-48.
About this article
Cite this article
Shcherbakov, A.V., Ivashchenko, M.V., Kozhechenko, A.S. et al. Parametric analysis in the design of technological electron beam guns. Russ. Electr. Engin. 87, 41–45 (2016). https://doi.org/10.3103/S1068371216010089
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371216010089