Abstract
In this study, the authors develop an automated system to control the process of electron-beam welding, in which the possibility of planning the technological process in the form of indication of a set of controlled and recorded parameters, as well as target values and tolerable ranges for them. Today, when welding products with a highly concentrated energy source, defects occur in the weld seam area, which leads to a large number of defects. The aim of the study is to increase the efficiency of the process of electron-beam welding of thin-walled structures due to the development and program implementation of a set of methods of automated planning and control of the technological process, as well as the statistical and intellectual processing of data obtained during the technological process. The program is developed for the installation of electron-beam welding, which is designed for the implementation of the technological process of electron-beam welding.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sidorov, V.P., Melzitdinova, A.V.: Electron beam welding. In: Technological Features and Equipment: Studies. Stipend. TSU Press, Togliatti (2013)
Mladenov, G.M., Trutnikov, D.N., Belenky, V.Y., Koleva, E.G.: Electron beam welding. Publishing House of Perm, Perm (2014)
Sudnik, V.A.: Fundamentals of welding modeling. In: The Handbook of ASM International Publishing House (USA): Technology of Mechanical Engineering, vol. 3, pp. 56–59 (2015)
Salomatova, E.S., Trushnikov, D.N., Belenky, V.Y.: Modeling of temperature in a steam-gas channel during electron beam welding. Therm. Process. Eng. 11, 514–518 (2013)
Olshanskaya, T.V., Salomatova, E.S: Review of modern methods of electron beam control in electron beam welding. Bulletin PNRPU. Mech. Eng. Mater. Sci. 4(18), 169–187 (2016)
Dragunov, V.K., et al.: Development of the technology of electron beam welding of high-pressure vessels made of 30XGSA steel. Oil Ind. 12, 126–130 (2016)
Stelvaga, A.A.: Development of a control system for the installation of electron beam welding. In: 52nd International Scientific Student Conference MNSC-2014: Instrumental Methods and Techniques of Experimental Physics. Novosibirsk National Research State University, Novosibirsk, p. 56 (2014)
Popenko, Y.N., Medvedev, A.M., Starostenko, A.A.: Software development for vacuum equipment control of electron beam welding installation. In: 54th International Scientific Student Conference MNSC-2016: Instrumental Methods and Techniques of Experimental Physics, p. 35. Novosibirsk National Research State University, Novosibirsk (2016)
Kitaev, N.I., Speransky, S.K.: Development of optimal control algorithms for electron beam processing based on complex analysis of nanostructures of welded joints. Math. Methods Eng. Technol. MMTT 1(11), 147–149 (2014)
Madera, A.G., Kandalov, P.I.: Principles of building a software package for thermal design of electronic systems. Softw. Prod. Syst. 3(31), 435–438 (2018)
Marchenko, Y., Petrik, I.A.: Development of technology of electron beam heat treatment of dispersion-hardening heat-resistant steels. Compressor Power Eng. 3, 40–42 (2016)
Brom, A.E., Stoyanova, M.V., Yazev, M.V., Korolev, S.A.: Assessment of technological resources for the production of composite products based on mathematical methods. IOP Conf. Ser. Mater. Sci. Eng. 934, 012003 (2020). https://doi.org/10.1088/1757-899X/934/1/012003
Kosenko, E.A., Nelyub, V.A.: Evaluation of the stress-strain state of a polymer composition material with a hybrid matrix. Polym. Sci. Ser. D 15, 240–244 (2022). https://doi.org/10.1134/S1995421222020137
Nelub, V., Gantimurov, A., Borodulin, A.: Economic analysis of data protection in systems with complex architecture using neural network methods. Econ. Ann. 185, 178–188 (2020). https://doi.org/10.21003/EA.V185-17
Haikin, S.: Neural Networks a Complete Course, 2nd edn. Williams Publishing House, Moscow (2006)
Borisov, V.V., Kruglov, V.V.: Artificial neural networks. In: Theory and Practice, 2nd edn. Hotline-Telecom, Moscow (2006)
Stoyanova, M.V., Novikov, A.D., Borodulin, A.S.: Evaluation construction made of polymer composite materials by molding using reusable flexible punches production profitability. IOP Conf. Ser. Mater. Sci. Eng. 934, 012068 (2020). https://doi.org/10.1088/1757-899X/934/1/012068
Kurashkin, S., Bukhtoyarov, V., Myrugin, A., Bocharov, A., Seregin, Y., Rogova, D.: Simulation model of the electron beam welding process for the formation of the effective technological parameters during the welding of aerospace structures. In: 2022 21st International Symposium INFOTEH-JAHORINA (INFOTEH), pp. 1–5. Institute of Electrical and Electronics Engineers Inc., East Sarajevo (2022). https://doi.org/10.1109/INFOTEH53737.2022.9751280
Pilinsky, M., Rutkovskaya, D., Rutkovsky, L.: Neural networks, Genetic Algorithms and Fuzzy Systems. Hotline-Telecom, Moscow (2006)
Nelyub, V.A., Fedorov, S.Y., Malysheva, G.V.: The study of the structure and properties of elementary carbon fibers with metal coatings. Inorg. Mater. Appl. Res. 12, 1037–1041 (2021). https://doi.org/10.1134/S2075113321040316
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Tynchenko, V., Kukartsev, V., Shalaeva, D., Zdrestova-Zaharenkova, S., Dzhioeva, N., Moiseeva, K. (2023). Development of Automated Control System of Electron-Beam Welding Process. In: Silhavy, R., Silhavy, P., Prokopova, Z. (eds) Software Engineering Application in Systems Design. CoMeSySo 2022. Lecture Notes in Networks and Systems, vol 596. Springer, Cham. https://doi.org/10.1007/978-3-031-21435-6_42
Download citation
DOI: https://doi.org/10.1007/978-3-031-21435-6_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-21434-9
Online ISBN: 978-3-031-21435-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)