Abstract
The article presents results of studying how an abrasive affects the wear of pressed modified wood and steel samples—counterbodies without hardening and with hardening by annealing and application of a diamond-like coating of titanium nitride. It is shown that the (linear and mass) wear rate of unreinforced steel samples is more than 20 times higher than for hardened samples; surface hardening via vacuum coating deposition is ineffective due to its intense peeling in the presence of an abrasive.
Similar content being viewed by others
REFERENCES
Tenenbaum, M.M., Types, processes, and mechanisms of abrasive wear, in Dolgovechnost’ trushchikhsya detalei mashin (Service Life of Rubbing Machine Parts), Garkunov, D.N., Ed., Moscow: Mashinostroenie, 1990, no. 5.
Khrushchov, M.M. and Babichev, M.A., Abrazivnoe iznashivanie (Abrasive Wear), Moscow: Mashinostroenie, 1976.
Bogdanovich, P.N. and Prushak, V.Ya., Trenie i iznos v mashinakh: uchebnik dlya vuzov (Friction and Wear in Machines: Manual for Higher Education Institutions), Minsk: Vysshaya Shkola, 1999.
Belyi, V.A., Vrublevskaya, V.I., and Kupchinov, B.I., Drevesno-polimernye konstruktsionnye materially i izdeliya (Wood-Polymeric Construction Materials and Products), Minsk: Nauka i Tekhnika, 1980.
Nevzorova, A.B., Makeyeu, V.V., Vrublevskii, V.B., and Kren’, A.P., Analysis of hardness pf modified wood by dynamic indentation, Derevoobrab. Prom-st., 2009, no. 3, pp. 27–29.
Gryaznov, B.T., et al., Methods of determination and improvement of adhesion of wear-resistant coatings, J. Frict. Wear, 1998, vol. 19, no. 4, pp. 34–41.
Susin, A.A., Khimiko-termicheskoe upravlenie vysokonapryazhennykh detalei (Chemical-Thermal Hardening of Highly Stressed Parts), Minsk: Belaruskaya Navuka, 1999.
Vrublevskaya, V.I., Nevzorova, A.B., and Vrublevskii, V.B., Iznosostoikie samosmazyvayushchiesya antifriktsionnye materialy i uzly treniya iz nikh (Wear-Resistant Self-Lubricating Antifriction Materials and Friction Units), Gomel, 2000.
Vrublevskaya, V.I., Nevzorova, A.B., Makeyeu V.V., and Vrublevskii, V.B., BY Patent 11223, Byull. Izobret., 2008, no. 5 (64), p. 117.
Tkachev, V.N., Rabotosposobnost’ detalei mashin v usloviyakh abrazivnogo iznashivaniya (Performance of Machine Parts in Conditions of Abrasive Wear), Moscow: Mashinostroenie, 1995.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Makeyeu, V.V., Vrublevskaya, V.I. Abrasive Wear of a Steel Counterbody in Frictional Contact with Pressed Modified Wood. J. Frict. Wear 40, 511–514 (2019). https://doi.org/10.3103/S1068366619060163
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366619060163