Abstract
The possibility of using a pulse current during cold rolling for obtaining monofilamentary and multifilamentary composite superconductors based on a NbTi alloy has been investigated. It has been established that a superconductor is greatly strengthened in the course of treatment. It has been shown that an increase in superconductor strength and hardness is caused not only by strain hardening, but also by precipitation hardening due to the action of current. It has been discovered that, during deformation with pulse current, a structure consisting of parent-phase nanosized grains and α-Ti precipitates forms in the alloy.
Similar content being viewed by others
References
Potanina, L.V., Vorobieva, A.E., et al., Nb3Sn and NbTi multifllamentary wires with enhanced heat capacity, AIP Conf. Proc., 2008, vol. 986, pp. 349–356.
Li, J.F., Zhang, P.X., Liu, X.H., et al., The microstructure of NbTi superconducting composite wire for iter project, Physica C, 2008, vol. 468, pp. 1840–1842.
Potanina, L.V., Research of double NbTi and triple NbTiTa alloys quality and the way to develop superconductors on their base for different engineering application, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow: A.A. Bochvar High-Technology Research Institute of Inorganic Materials, 2006.
Chernyi, O.V., Andrievskaya, N.F., Ilicheva, V.O., et al., Themicrostracture and criticalcurrent density of Nb-48 wt % Ti superconductor with very high alpha-Ti precipitate volume and very high critical current, AIP Conf. Proc., 2002, vol. 48, pp. 883–890.
Ksenofontov, V.A., Lazareva, M.B., Mazilova, T.I., et al., Elements local distribution in β-phase for NbTi superconducting alloy, Fiz. Nizk. Temp., 2008, vol. 34, no. 11, pp. 1127–1130.
Fedotkin, A.A. and Stolyarov, V.V., Features of deformation behavior of nanostructured Ti alloys under tension under pulse current effect, Mashinostr. Inzh. Obraz., 2012, no. 1, pp. 28–35.
Semendeeva, O.V., Uchevatkina, N.V., and Stolyarov, V.V., Microstructure and deformation ability of VT6 alloy under electroplastic rolling, Deform. Razrush. Mater., 2011, no. 8, pp. 20–23.
Potapova, A.A. and Stolyarov, V.V., Structure variation caused by electroplastic rolling and annealing in TiNi bar, Izv. Vyssh. Uchebn. Zaved. Chern. Metallurg., 2010, no. 10, pp. 68–71.
Frolova, A.V. and Stolyarov, V.V., Effect of pulse current on deformability, structure, and properties of NbTi alloy superconductor, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 4, p. 325.
Lee, P.J. and Larbalestier, D.C., Niobium-titanium superconducting wires: nanostructures by extrusion and wire drawing, Invited Presentation at Interwire, Atlanta, 2001, pp. 1–8.
TU (Specification) no. 001.407-2008: Composite Circular Multifiber Superconducting Wire Based on NiTi Alloy in Copper Matrix, 2008.
Muzzi, L., Marzi, G.D., Zignani, C.F., and Somerkoski, J., Metallurgical processes in NbTi filaments as a function of isothermal annealing time, Phys. Proc., 2012, vol. 36, pp. 1516–1521.
Beloshenko, V.A., Konstantinova, T.E., Matrosov, N.I., et al., Equal-channel multi-angle pressing effect on the propertiesof NbTi alloy, J. Superconduct. Novel Magn., 2009, vol. 22, pp. 505–510.
Matrosov, N.I., Chishko, V.V., and Sennikova, L.F., Thermal processing effect onto properties of superconducting wire produced by equal channel multiangle pressure, Vopr. Materialoved., 2007, no. 2 (50), pp. 1–10.
Conrad, H., Electroplasticity in metals and ceramics, Mater. Sci. Eng. A, 2000, vol. 287, pp. 276–287.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Stolyarov, 2015, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2015, No. 4, pp. 82–88.
About this article
Cite this article
Stolyarov, V.V. Strengthening and structure refinement of a Cu-TiNb composite superconductor upon rolling with current. J. Mach. Manuf. Reliab. 44, 372–377 (2015). https://doi.org/10.3103/S1052618815040135
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618815040135