Abstract
Based on the analysis of possible configuration variants for a pipe rolling unit (PRU) and modern trends in the development of seamless pipe rolling technology, a new combination of equipment for an advanced pipe rolling complex with a continuous mill is proposed, which solves the problems of expanding the grade range of manufactured products, as well as of improving technological flexibility and productivity. The distinctive feature of the novel PRU consists in the installing of two piercing mills of different types, which makes it possible to perform a double piercing of a pipe billet made of high-alloy steels, expands the size range of billets, and provides an increase in the actual service life of the unit.
Similar content being viewed by others
REFERENCES
Osadchii, V.Ya., Vavilin, A.S., Zimovets, V.G., and Kolikov, A.P., Tekhnologiya i oborudovanie trubnogo proizvodstva. Uchebnoe posobie dlya vuzov (Technology and Equipment of Pipe Production), Osadchii, V.Ya., Ed., Moscow: Intermet Inzhiniring, 2007.
Krupman, Yu.G., Lyakhovetskii, L.S., Semenov, O.A., et al., Sovremennoe sostoyanie mirovogo proizvodstva trub (State-of-the-Art of World Pipe Production), Moscow: Metallurgiya, 1992.
Danilov, F.A., Gleiberg, A.Z., and Balakin, V.G., Goryachaya prokatka i pressovanie trub (Hot Rolling and Stamping of Pipes), Moscow: Metallurgiya, 1972.
Anisiforov, V.P., Zel’dovich, L.S., and Kurganov, V.D., Reduktsionnye stany (Reduction Mills), Moscow: Metallurgiya, 1971.
Blinov, Yu.I., Prodol’naya prokatka trub v mnogovalkovykh kalibrakh (Longitudinal Rolling of Pipes in Multiroll Calibers), Chelyabinsk: Metall, 1992.
Zimovets, V.G., Sovremennoe Proizvodstvo stal’nykh trub (State-of-the-Art of Steel Pipe Production), Volzhskii, Volgograd oblast: Poligrafkombinat, 1998.
Galkin, S.P., Goncharuk, A.V., and Romantsev, B.A., Broaching-mill selection, Steel Transl., 2012, vol. 42, no. 1, pp. 66–69. https://doi.org/10.3103/S0967091212010068
Klachkov, A.A., Operating the PQF 10 3/4″ continuous mill at OAO Tagmet, Steel Transl., 2011, vol. 41, no. 11, pp. 958–960. https://doi.org/10.3103/S0967091211110118
Romantsev, B.A., Tran, B.H., Skripalenko, M.M., Skripalenko, M.N., Gartvig, A.A., and Gladkov, Yu.A., Investigation of the process of screw rolling in a four-roll stand by simulation, Metallurgist, 2018, vol. 62, nos. 7–8, pp. 618–626. https://doi.org/10.1007/s11015-018-0700-4
Romantsev, B.A., Brodskii, M.L., Goncharuk, A.V., et al., Method for producing seamless pipes at installation with screw broaching mills and continuous longitudinal rolling mill, RF Patent 2441722, Byull. Izobret., 2012, no. 4.
Matveev, B.N., Improving the production of pipes from high-alloy steels, Stal’, 2000, no. 3, pp. 56–59.
Ovchinnikov, D.V. et al., Method for obtaining sleeves, RF Patent 2361689, Byull. Izobret., 2009, no. 20.
Marchenko, L.G., Fadeev, M.M., Bodrov, Yu.V., Ovchinnikov, D.V., and Chernyshov, D.Yu., Reduction mill in the line of a TPA 80 pipe-roling system, Steel Transl., 2009, vol. 39, no. 7, p. 584. https://doi.org/10.3103/S0967091209070171
Leferink, M., Method and rolling installation for manufacturing wire, bars, and seamless pipes, RF Patent 2274503, Byull. Izobret., 2006, no. 11.
Barichko, B.V., Vydrin, A.V., Klachkov, A.A., et al., Installation for manufacturing seamless pipes, RF Patent 2586177, Byull. Izobret., 2016 no. 16.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by O. Polyakov
About this article
Cite this article
Pumpyanskii, D.A., Vydrin, A.V., Barichko, B.V. et al. New Concept of Pipe Rolling Unit with a Continuous Mill. Steel Transl. 52, 615–618 (2022). https://doi.org/10.3103/S0967091222060122
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091222060122