Abstract
At the macro-, micro- and nanoscale levels, the optical, scanning and transmission electron diffraction microscopy methods revealed quantitative transformations of the structure at a depth of 0, 2, 5, 10 mm along the central axis and the symmetry axis of the head fillet of long-length differentially hardened rails after extremely long-term operation (passed tonnage 1770 million gross tons). At the macroscale level, numerous shallow parallel contact fatigue cracks are observed on the surface of the working fillet, and small spalls are observed on the surface of the non-working fillet. The side wear of the rail was 2.5 mm, and the vertical wear was 2 mm. The metal microstructure of the rail head complies with the requirements of the standard and technical specifications of Russian Railways. At the microscale level, the transformation of cementite plates was established by cutting them with moving dislocations and dissolving with the escape of carbon to the dislocation lines, low- and high-angle boundaries. There is a decrease in the dispersion of the microstructure with distance from the tread surface. At the nanoscale level, the subgrain structure formed in the surface layers (subgrain size 110–200 μm) contains nanosized cementite particles (25–60 nm) localized at the joints and along the subgrain boundaries. It is suggested that this type of structure is formed as a result of dynamic recrystallization during megaplastic deformation, which occurs during extremely long-term operation of rails. The content of the subgrain structure in the fillet layer is five times higher than the content in the surface layer of the tread surface. It has been established that during operation, the transformation of lamellar perlite along the central axis of the head proceeds more slowly than along the symmetry axis of the fillet.
Similar content being viewed by others
REFERENCES
Yuriev, A.A., Gromov, V.E., Ivanov, Yu.F., Rubannikova, Yu.A., Starostenkov, M.D., and Tabakov, P.Y., Structure and Properties of Lengthy Rails after Extreme Long-Term Operation, Millersville, Pa.: Materials Research Society, 2021. https://doi.org/10.21741/9781644901472
Gromov, V.E., Ivanov, Yu.F., Kormyshev, V.E., Yuriev, A.A., Semin, A.P., and Rubannikova, Yu.A., Change in structural-phase states and properties of lengthy rails during extremely long-term operation, Usp. Fiz. Met., 2020, vol. 21, no. 4, pp. 527–553. https://doi.org/10.15407/ufm.21.04.527
Ivanisenko, Yu. and Fecht, H.J., Microstructure modification in the surface layers of railway rails and wheels: Effect of high strain rate deformation, Steel Tech, 2008, vol. 3, no. 1, pp. 19–23.
Ivanisenko, Yu., Maclaren, I., Sauvage, X., Valiev, R.Z., and Fecht, H.-J., Shear-induced α → γ transformation in nanoscale Fe–C composite, Acta Mater., 2006, vol. 54, no. 6, pp. 1659–1669. https://doi.org/10.1016/j.actamat.2005.11.034
Wu, J., Petrov, R.H., Kolling, S., Koenraad, P., Malet, L., Godet, S., and Sietsma, J., Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails, Metals, 2018, vol. 8, no. 10, pp. 749–761. https://doi.org/10.3390/met8100749
Zhang, H.W., Ohsaki, S., Mitao, S., Ohnuma, M., and Hono, K., Microstructural investigation of white etching layer on pearlite steel rail, Mater. Sci. Eng., A, 2006, vol. 421, nos. 1–2, pp. 191–199. https://doi.org/10.1016/j.msea.2006.01.033
Takahashi, J., Kawakami, K., and Ueda, M., Atom probe tomography analysis of the white etching layer in a rail track surface, Acta Mater., 2010, vol. 58, no. 10, pp. 3602–3612. https://doi.org/10.1016/j.actamat.2010.02.030
Newcomb, S.B. and Stobbs, W.M., A transmission electron microscopy study of the white-etching layer on a rail head, Mater. Sci. Eng., 1984, vol. 66, no. 2, pp. 195–204. https://doi.org/10.1016/0025-5416(84)90180-0
Lojkowski, W., Djahanbakhsh, M., Burkle, G., Gierlotka, S., Zielleski, W., and Fecht, H.-J., Nanostructure formation on the surface of railway tracks, Mater. Sci. Eng., A, 2001, vol. 303, nos. 1–2, pp. 197–208. https://doi.org/10.1016/S0921-5093(00)01947-X
Wild, E., Wang, L., Hasse, B., Wroblewski, T., Goerigk, G., and Pyzalla, A., Microstructure alterations at the surface of a heavily corrugated rail with strong ripple formation, Wear, 2003, vol. 254, no. 9, pp. 876–883. https://doi.org/10.1016/S0043-1648(03)00239-4
Ishida, M., Rolling contact fatigue (RCF) defects of rails in Japanese railways and its mitigation strategies, Electron. J. Struct. Eng., 2013, vol. 13, no. 1, pp. 67–74. https://ejsei.com/EJSE/article/view/162.
Rail defects. Classification, catalog and parameters of defective and acute-defective rails. Instruction, Moscow: Order of the Russian Railways no. 2499 of October 23, 2014.
Kumar, C.S.S.R., Transmission Electron Microscopy: Characterization of Nanomaterials, New York: Springer, 2014. https://doi.org/10.1007/978-3-642-38934-4
Transmission Electron Microscopy: Diffraction, Imaging, and Spectrometry, Carter, C.B. and Williams, D.B., Eds., Berlin: Springer, 2016. https://doi.org/10.1007/978-3-319-26651-0
Egerton, F.R., Physical Principles of Electron Microscopy: An Introduction to TEM, SEM, and AEM, Basel: Springer, 2016. https://doi.org/10.1007/978-3-319-39877-8
Tomas, G. and Goringe, M.J., Transmission Electron Microscopy of Materials, New York: John Wiley & Sons, 1979.
Hirsch, P.B., Howie, A., Nicholson, R., Pashley, D.W., and Whelan, M.J., The Electron Microscopy of Thin Crystals, Butterworths, 1965.
Gavrilyuk, V.G., Gertsriken, D.S., Polushkin, Yu.A., and Fal’chenko, V.M., Mechanism of cementite decomposition during plastic deformation of steel, Phys. Met. Metallogr., 1981, vol. 51, no. 1, pp. 125–129.
Gridnev, V.N. and Gavrilyuk, V.G., Cementite decomposition in steel under plastic deformation (a review), Phys. Met., 1982, vol. 4, no. 3, pp. 531–551.
Glezer, A.M., On the nature of ultrahigh plastic (megaplastic) strain, Bull. Russ. Acad. Sci. Phys., 2007, vol. 71, no. 12, pp. 1722–1730. https://doi.org/10.3103/S106287380712012X
ACKNOWLEDGMENTS
We are grateful to E.V. Polevoi for providing of samples and to A.E. Korochkin for the participation in discussions of the results.
Funding
This work was supported by the Russian Foundation for Basic Research, grant no. 19-32-60001.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by V. Selikhanovich
About this article
Cite this article
Kuznetsov, R.V., Kormyshev, V.E., Gromov, V.E. et al. Transformation of Structural-Phase States in the Rail Head after Extremely Long-Term Operation. Steel Transl. 52, 290–295 (2022). https://doi.org/10.3103/S0967091222030081
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091222030081