Abstract
The use of lubricant in the hot rolling of steel strip by means of broad-strip mills is considered, in theoretical and practical terms. The benefits of the lubricant are shown. Throlle delivery of lubricant to the deformation zone is analyzed. Practical methods of supplying lubricants to the rolls and the deformation zone are assessed. Recommendations are made regarding lubricant selection. Methods are proposed for calculating the lubricant flow rate in hot strip rolling.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Tubol’tsev, L.G., Kilievich, A.F., Adamskii, S.D., and Netesov, N.P., Goryachaya prokatka listovoi stali s tekhnologicheskimi smazkami (Hot Rolling of Sheet Steel with Technological Lubricants), Moscow: Metallurgiya, 1982.
Mazur, V.L. and Nogovitsyn, A.V., Teoriya i tekhnologiya tonkolistovoi prokatki (chislennyi analiz i tekhnologicheskie prilozheniya) (Theory and Technology of Thin-Sheet Rolling: Numerical Analysis and Engineering Applications), Dnepropetrovsk: Dnipro-Val, 2012.
Garber, E.A. and Khlopotin, M.V., Modelirovanie i sovershenstvovanie teplovogo rezhima i profilirovok valkov shirokopolosnykh stanov goryachei prokatki (Modeling and Improvement of Heat Regime and Roll Profiling of Broadband Hot Rolling Mills), Moscow: Teplotekhnik, 2013.
Mazur, V.L. and Timoshenko, V.I., Lubricant action of emulsions in rolling: theory and practice, Steel Transl., 2017, vol. 47, no. 7, pp. 483–490.
Mazur, V.L. and Timoshenko, V.I., Teoriya i tekhnologiya prokatki (gidrodinamicheskie effekty smazki i mikrorel’ef poverkhnosti) (Theory and Technology of Rolling: Hydrodynamic Effect of Lubrication and Surface Microrelief), Kyiv: ADEF-Ukraina, 2018.
Gorbunov, A.V., Kuznetsov, A.V., Vetrenko, A.G., et al., Improvement of the energy efficiency during operation of the lubrication supply system into the rolling on continuous wide-band sheet mills 2000, Stal’, 2012, no. 2, pp. 52–55.
Tret’yakov, A.V., Teoriya, raschet i issledovanie stanov kholodnoi prokatki (Theory, Calculation, and Study of Cold Rolling Mills), Moscow: Metallurgiya, 1966.
Grudev, A.P. and Tilik, V.T., Tekhnologicheskie smazki v prokatnom proizvodstve (Technological Lubricants in Rolling Production), Moscow: Metallurgiya, 1975.
Meleshko, V.I., Chekmarev, A.P., Mazur, V.L., and Kachailov, A.P., Otdelka poverkhnosti lista (The Finishing of Sheet Surfaces), Moscow: Metallurgiya, 1975.
Grudev, A.P., Zil’berg, Yu.V., and Tilik, V.T., Trenie i smazka pri obrabotke metallov davleniem: spravochnik (Friction and Lubrication during Metal Processing by Pressure: Handbook), Moscow: Metallurgiya, 1982.
Dema, R.R., Amirov, R.N., Zhelezkov, O.S., et al., Profile of forming tool with lubrication supply system for continuous broadband hot rolling mills, Stal’, 2017, no. 3, pp. 37–40.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.L. Mazur, V.I. Timoshenko, 2018, published in Stal’, 2018, No. 4, pp. 21–27.
About this article
Cite this article
Mazur, V.L., Timoshenko, V.I. Hot Rolling of Strip with Lubricant: Theoretical and Practical Aspects. Steel Transl. 48, 245–251 (2018). https://doi.org/10.3103/S0967091218040071
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091218040071