Abstract
The influence of cyclic flexural deformation of thick low-alloy and carbon steel sheet on its structure and mechanical properties is investigated over a broad temperature range. In plastic flexure, the deformational amplitude is 1–6%. Permissible parameter ranges corresponding to the best mechanical properties of the steel, without irreversible structural damage, are selected. Strengthening treatment for thick steel sheet is developed, and permissible parameter ranges are proposed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Fedos’ev, V.I., Soprotivlenie materialov (Strength of Materials), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2000.
Podgaiskii, M.S., Maksimov, A.B., and Belik, A.V., Effect of cyclic plastic bending on the proneness of steel St3sp to brittle fracture, Met. Sci. Heat Treat., 1982, vol. 24, no. 7, pp. 498–500.
Maksimov, A.B., Effect of the degree of single strain at binary deformation on the durability of steel, Nov. Mater. Tekhnol. Metall. Mashinostr., 2009, no. 2, pp. 83–86.
Podgaiskii, M.S. and Maksimov, A.B., Strengthening of sheet steel during cyclic flexure deformation, in Povyshenie effektivnosti proizvodstva tolstolistovogo prokata (Effective Production of Thick Sheet Rolling), Moscow: Metallurgiya, 1984, pp. 79–81.
Maksimov, A.B., A model of strengthening of low-alloy steel under plastic deformation by cyclic flexure, Nov. Mater. Tekhnol. Metall. Mashinostr., 2012, no. 1, pp. 87–90.
Podgaiskii, M.S., Maksimov, A.B., and Neskub, Yu.P., Effect of deformation by cyclic bending on the dislocation structure of 10G2S1 steel, Izv. Akad. Nauk SSSR, Ser.: Met., 1985, no. 5, pp. 131–133.
Dolzhenkov, F.E., Podgaiskii, M.S., and Maksimov, A.B., The use of plastic deformation by cyclic bending for strengthening thermomechanical processing of steel sheets, Izv. Akad. Nauk SSSR, Ser.: Met., 1984, no. 2, pp. 156–158.
Podgaiskii, M.S., Maksimov, A.B., and Nalivaichenko, T.M., Strengthening of 10G2S1 steel in relation to the temperature of cyclic bending deformation, Met. Sci. Heat Treat., 1986, vol. 28, no. 6, pp. 455–458.
Maksimov, A.B. and Podgaiskii, M.S., The change in the surface microroughness during plastic cyclic flexure, Izv. Akad. Nauk SSSR, Ser.: Met., 1984, no. 2, pp. 156–158.
Maksimov, A.B., Estimation of damage of low-alloyed steel during cold plastic deformation, Nov. Mater. Tekhnol. Metall. Mashinostr., 2013, no. 1, pp. 29–31.
Maksimov, A.B., Podgaiskii, M.S., and Nalivaichenko, T.M., USSR Inventor’s Certificate no. 1433990, Byull. Izobret., 1988, no. 40.
Maksimov, A.B., Gulyaev, M.V., and Erokhina, I.S., Damage to thick steel sheet in cyclic plastic flexure, Steel Transl., 2016, vol. 46, no. 3, pp. 186–191.
Podgaiskii, M.S., Maksimov, A.B., and Nalivaichenko, T.M., Plastic deformation under cyclic alternating bending, Fiz.-Khim. Mekh. Mater., 1983, no. 1, pp. 115–116.
Maksimov, A.B. and Gulyaev, M.V., Distribution of strength along the thickness of the beam during plastic cyclic bending, Probl. Chern. Metall., 2015, no. 2, pp. 39–43.
Maksimov, A.B. and Gulyaev, M.V., Distribution of the deformation along the thickness of a wide beam during cyclic bending, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2015, no. 7, pp. 486–490.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.B. Maksimov, I.S. Erokhina, 2017, published in Stal’, 2017, No. 11, pp. 49–52.
About this article
Cite this article
Maksimov, A.B., Erokhina, I.S. Cyclic Flexural Deformation of Thick Steel Sheet. Steel Transl. 47, 752–755 (2017). https://doi.org/10.3103/S0967091217110067
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091217110067