Abstract
The development of steel-ball production within the Commonwealth of Independent States over the last 50 years is analyzed. Three periods are identified and characterized. The factors responsible for poor ball quality are discussed. The requirements for the production of high-quality balls with hardness up to HRC 65 are outlined, in terms of the chemical composition of the steel, the equipment required, and the production technology. Significant increase in ball quality requires the creation of specialized rolling systems. The fundamental principles to be adopted in creating such systems are reviewed.
Similar content being viewed by others
References
Ignatov, V.A., Solenyi, V.K., Zhuk, V.L., et al., Basic principles for the selection of materials for the manufacture of grinding bodies operating under conditions of impact-abrasive, shock-corrosive abrasive, and impact-fatigue wear, Met. Lit’e Ukr., 2001, nos. 10–11, pp. 31–34.
Andreev, S.E., Zverevich, V.V., and Petrov, V.A., Droblenie, izmel’chenie i grokhochenie poleznykh iskopaemykh (Crushing, Grinding, and Screening of Minerals), Moscow: Nedra, 1966.
Berdysheva, T.T., Metal economy in the iron ore concentrating plants, Byull. Tsentr. Nauchno-Issled. Inst. Chern. Metall., 1964, no. 3, pp. 1–18.
Vavilkin, N.M. and Chelnokov, V.V., Material selection for production of grinding balls, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2002, no. 1, pp. 41–46.
Solenyi, V.K., Kostrykin, V.P., Baguzin, V.I., et al., Production of rolled grinding balls, Stal’, 1985, no. 11, pp. 58–60.
GOST (State Standard) 7524-64: Ball Mills. Steel Grinding Balls, Moscow: Izd. Standartov, 1964.
Prokatnye stany: spravochnik. Tom 2. Sredne-, melkosortnye i spetsial’nye stany (Rolling Mills: Handbook, Vol. 2: Medium-, Small, and Special Mills), Moscow: Metallurgiya, 1991.
GOST (State Standard) 7524-83: Grinding Steel Balls for Ball Mills. Specifications, Moscow: Izd. Standartov, 1983.
GOST (State Standard) 7524-89: Grinding Steel Balls for Ball Mills. Specifications, Moscow: Izd. Standartov, 1989.
Efremenko, V.G., Ganoshenko, I.V., and Tkachenko, F.K., Implementation of production technology of rolled grinding balls with 120 mm diameter and third group of hardness according to DSTU 3499 at the Azovstal Company, Metall. Protsess. Oborud., 2006, no. 3, pp. 25–28.
Bessonnikova, N.V., Vaisberg, V.M., Kiryushin, A.V., et al., Efficiency of high-hardness steel grinding balls for grinding of cooper porphyry ores, Obogashch. Rud, 1990, no. 1, pp. 7–9.
Katannye i termoobrabotannye melyushchie shary: prospekt (Rolled and Heat-Treated Grinding Balls: Circular), Armco Moly-Cop, 1977.
Zhukov, A.A., Epshtein, L.Z., and Sil’man, G.I., Microstructure of steel and cast iron, and the Charpy test, Izv. Akad. Nauk SSSR, Met., 1971, no. 2, pp. 145–152.
GOST (State Standard) 2590-2006: Round Hot-Rolled Steel Bars. Dimensions, Minsk: Evraz. Sovet Stand., Metrol., Sertif., 2006.
Metallurgicheskii analiz kachestva melyushchikh sharov: prospekt (Metallurgical Quality Analysis of Grinding Balls: Circular), Nelsen Steel and Wire, 1978.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.V. Stalinskii, A.S. Rudyuk, V.K. Solenyi, A.V. Yudin, 2017, published in Stal’, 2017, No. 2, pp. 28–34.
About this article
Cite this article
Stalinskii, D.V., Rudyuk, A.S., Solenyi, V.K. et al. Improving the quality of steel grinding balls. Steel Transl. 47, 130–136 (2017). https://doi.org/10.3103/S0967091217020115
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091217020115