Abstract
Backgrounds
This study aimed to evaluate the microstructural changes in the peri-implant bone in patients with short implants in terms of implant survival status by using fractal analysis measurements.
Results
Dental panoramic radiographs (DPRs) of 67 patients were examined and included in this study. Fractal analysis and measurement of the crown-implant ratio were performed with ImageJ. The fractal analysis measurement was performed on the DPRs obtained at preoperative (FD0) and in the follow-up periods (after 2 ± 2 weeks (FD1), 2 months ± 2 weeks (FD2), 6 months ± 2 weeks (FD3), and 12 months + (FD4)). A p value < 0.05 was considered statistically significant. Power analyses were conducted for the test results that did not reject null hypothesis. A significant difference was found in the FD1 and FD2 values between the implant survival groups (p < 0.001 and p = 0.023, respectively). The mean FD1 and FD2 values of the success group were significantly higher than those of the failure group.
Conclusions
Fractal analysis is a useful method to measure the trabecular microstructure of bone in non-standardized dental radiographs. The present study has a low power to reject the null hypothesis because of the low number of cases of implant failure. Therefore, further study with a large sample size is warranted. In clinical practice, the survival of implants may be predicted by analyzing fractal dimension of the surrounding trabecular bone of the implants.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Backgrounds
Mandelbrot introduced fractals to describe his observation of shapes in nature, such as curves, surfaces, disconnected “dust,” and odd shapes. The word fractal originates from the Latin word “fractus,” which means broken. By using fractal mathematics, several studies have analyzed various fractal patterns in the human body. Fractal analysis is a mathematical method of describing complex shapes and structural patterns of the nature and is expressed numerically as fractal dimension [1, 2]. Trabeculae are thin columns with numerous large spaces that give a honeycomb or spongy appearance of cancellous bone, which is also called trabecular bone or spongy bone [3]. Previously, fractal analysis has been reported as a useful method to detect various diseases that affect the trabecular bone structure [4,5,6]. Especially in the field of dentistry, studies have indicated that fractal analysis by the box counting method can successfully evaluate trabecular changes in the mandible of patients with osteoporosis [7,8,9] and periodontal diseases [10] and in lactating women [11]. Furthermore, studies have been conducted to determine the changes in trabecular bone induced by surrounding bone tissues of implants [12,13,14,15].
Many studies have examined the effect of fractal analysis on image acquisition parameters [16, 17]. Although some studies have stated that fractal measurement of trabecular bone microstructures is affected by exposure time and noise, most studies support the belief that fractal measurement is relatively affected by imaging parameters but do not lead to a significant difference [18, 19]. One study that investigated the diagnostic imaging of the trabecular bone structure of oral implants by using cone beam computed tomography (CBCT) reported the highest accuracy of the measurement of fractal analysis. This study also highlighted the disadvantage of CBCT with regard to its accessibility and cost in dental clinical practice; however, it emphasized the practicality and accessibility of panoramic and periapical dental radiographs [20]. Fractal analysis can be performed on nonstandardized dental radiographs to assess pathological changes in bone or to assess the quality of peri-implant bone [17, 19, 21].
The quality of bone tissue at the site of implantation can be determined preoperatively with high accuracy, and changes in the trabecular structure, which is vital for the primary and secondary stability of the implant, can be observed during the follow-up after implantation.
Previous studies have evaluated fractal analysis of peri-implant bone before and after loading. However, no study has examined fractal analysis of the surrounding bone tissue of short implants or the changes in fractal analysis values of peri-implant bones according to jaws and restorative properties.
The present study aimed to evaluate the microstructural changes in the peri-implant bone in patients with short implants in terms of the implant survival status by using fractal analysis measurements. If the fractal analysis measures trabecular bone microstructural changes successfully, then the fractal dimensional changes of the peri-implant bones of the implants that failed will be significantly different.
Materials and methods
Study participants
This retrospective study was conducted in the dental clinic of Oral and Maxillofacial Radiology department and was approved by the local ethics committee (2013/203). The participants had approached the Prosthodontics Clinic between 2012 and 2019 for partial or complete tooth complaints. Among the data of 116 patients reviewed, panoramic radiographs of 67 patients were examined and included in this study. The panoramic radiographs were selected according to the following inclusion criteria: (1) no apparent observations of excessive imaging artifact; (2) patients who had all five panoramic radiographs—before implantation, immediately after prosthodontic loading (2 ± 2 weeks), at 2 months ± 2 weeks after implantation, at 6 months ± 2 weeks after loading, and at 12 months or more after loading (Fig. 1.); and (3) panoramic radiographs of patients without bone metabolism disease. Informed consent was obtained from all patients before their enrollment in the study. Information about the medical status of the patients was obtained from their anamnesis records.
Fractal dimension values measured from the same area of interest on each panoramic radiograph over five different time intervals are shown in the figure. FD0, fractal dimension 0 (preoperative); FD1, fractal dimension 1 (0–1 months of follow-up); FD2, fractal dimension 2 (1–3 months of follow-up); FD3, fractal dimension 3 (6–12 months of follow-up); FD4, fractal dimension 4 (12 + months of follow-up)
Radiographic technique
Sixty-seven dental panoramic radiographs (DPRs) were evaluated. All DPRs were obtained with the same radiography device (OP200 D; Instrumentarium Dental, Tuusula, Finland; radiography parameters, 66–85 kVp, 10–16 mA, 14.1 s exposure time). Patients were positioned for radiography according to the manufacturer’s recommendations; the Frankfort horizontal plane was parallel to the floor and the sagittal plane was aligned with the vertical line of the device. The region of interest (ROI) was arbitrarily selected on each radiograph (Fig. 2).
Fractal dimension calculation
Fractal analysis was performed using the box counting method developed by White and Rudolph [22] and Geraets et al. [23]. The DPRs were analyzed with the ImageJ version 1.38x software (National Institute of Health, Bethesda, MD, USA) on a Dell Precision T5400 workstation (Dell, TX, USA) with a 32-inch Dell liquid crystal display screen with a resolution of 1280 × 1024 pixels in a darkroom. After selection of ROI, the image was duplicated (Fig. 3a). The image was then blurred with a Gaussian filter. Overlapping soft tissues or ghost images of the anatomical structures were removed with the density correction step of the Gaussian filter with large-scale alterations in image brightness caused by varying thickness of the object. Only large differences in density were retained (Fig. 3b). The generated blurred images were subtracted from the original image (Fig. 3c). A gray value of 128 was added to each pixel location, which resulted in an image with individual alterations that reflect certain properties with different brightness, such as the trabeculae and bone marrow (Fig. 3d). A binary image was generated by thresholding with a brightness value of 128. In this process, the image was segmented into regions that represented the bone marrow and trabeculae (Fig. 3e). Thereafter, the image was inverted, and the segments that represented the trabeculae were set to black color, and the bone marrow was set to white color (Fig. 3f). The resulting eroded and dilated image had reduced noise (Fig. 3 g, h). Lastly, with the skeletonization process, the image was further eroded until only the central line of pixels remained (Fig. 3i). The box counting algorithm provided by the software was used for fractal analysis of the reduced images. The image was divided into squares of pixels of size 2, 3, 4, 6, 8, 12, 16, 32, and 64. The squares that included the segments of trabeculae and the total number of squares were calculated for each pixel size. A logarithmic scale graph of the obtained values was plotted. The dimensional value was obtained from the slope of the line that was drawn according to the plotted points on the logarithmic graph.
Measurement of the crown-implant ratio
The crown-implant ratio was measured using the ImageJ version 1.38 software measuring tool in conjunction with a magnification tool. Each implant was measured from its bottom to the crown base and then from the crown base to its highest point (Fig. 4).
All measurements were performed by a dento-maxillofacial radiologist who was blinded to patient information. To evaluate the intra-observer correlation, 20% of the images were randomly selected, and fractal analysis measurements were performed by the same radiologist 1 month later.
Statistical analyses
Statistical analyses were conducted with the R Statistical Software version 3.0.2 (Foundation for Statistical Computing, Vienna, Austria) and TURCOSA (Turcosa Analytics Ltd. Co., Turkey). Normal distribution of the data was evaluated with the Shapiro–Wilk test. Pearson’s correlation coefficient analysis was used to evaluate the inter-observer correlations and for comparison of numeric variables. Homogeneity of variances was evaluated with Levene test. Kruskal–Wallis test, Mann–Whitney U test, Student’s t test, and Welch two-sample t test were performed to compare the numerical variables between the categorical between the successful and failed implant groups. Fisher’s exact test was used to compare categoric variables between the implant survival groups. A probability level of less than 5% (p < 0.05) was accepted as statistically significant. Power analyses were conducted for the test results that did not reject null hypothesis.
Results
Descriptive statistics were performed. The data were not normally distributed (p < 0.05). The intra-observer correlation coefficients of repeated measurements were 0.927, 0.889, 0.913, 0.988, 0.961, and 0.936 for FD0 (fractal dimension), FD1, FD2, FD3, FD4, and crown-implant ratio, respectively. Descriptive data are shown in Figs. 5, 6, and 7. A significant difference was found for sex between the implant survival groups (p = 0.024). There was no significant difference between the implant survival groups for patients’ age, type of implant, jaw of the inserted implant, and FD0 (preoperative fractal dimension values). Moreover, there was no significant difference between the implant survival groups for crown-implant ratios measured after implant loading (p = 0.101). Table 1 shows the distribution and description of FD1 and FD2 values, crown-implant ratios, sex difference between the successful and failed implant survival groups, and power and effect size of the tests. A significant difference was found in the FD1 and FD2 values between the implant survival groups (p < 0.001 and p = 0.023, respectively). The mean FD1 and FD2 values of the success group were significantly higher than those of the failure group. The mean FD values before and after implant insertion and loading showed no significant difference (p > 0.05) (Table 2.). There was no significant correlation between FD3 and FD4 values and crown-implant ratios measured after implant loading (p > 0.05). Furthermore, there was no significant difference in the FD3 and FD4 values between the groups for different types of prosthetic restorations (p > 0.05).
Discussion
This study aimed to evaluate the microstructural changes in the peri-implant bone in patients with short implants in terms of the implant survival status by using fractal analysis measurements.
In this study, a significant difference was found in the FD1 and FD2 values between the implant survival groups, and the mean FD1 and FD2 values of the success group were significantly higher than those of the failure group. This result indicates that the assessment of fractal analysis at 3 months after implant insertion may be useful to determine the probability of cases of implant failure. According to our results, the fractal analysis values of the peri-implant bones of cases of implant failure were significantly lower at 0–1 month (FD1) and 1–2 months (FD2) after implantation. This may have contributed to the reduction of trabecular bone density in the bone around the implantation site.
In our study, the ratio of crown-implant length showed no statistically significant difference compared to the success rate of implantation for post-loading implants; however, the small sample size may have contributed to this result. In addition, the values of mean crown-implant ratio were higher in the failure group than in the success group; this finding could be interpreted as an indicator of clinical significance. There was no clinically significant correlation between the crown-implant ratio and FD3 and FD4 values measured after implant loading.
Some studies have stated that measurements of fractal analysis are affected by image noise and exposure parameters, and therefore, these analyses should be applied to standardized radiographs [16, 24]. In contrast, other reports indicate that image acquisition and exposure parameters do not significantly affect measurements of fractal analysis [14, 15, 19, 20].
Ibrahim et al. [20] performed fractal analysis measurements with CBCT and demonstrated high accuracy of measurements as compared to dental radiographs for the diagnosis and follow-up of implant. However, the effective exposure dose during dental tomography is considerably higher than that during dental radiography. Therefore, CBCT is not indicated for the assessment of implant follow-up for all cases of implantation [25].
Fractal analysis of bone microstructure on dental radiographs may be useful for diagnostic applications; however, the histological microstructures of the bone cannot be visualized by any clinical imaging modality. Corpas et al. [12] stated that minor changes in bone occurring over a short-term period can be followed up with digital intraoral radiography; however, the results of radiographic fractal analysis did not match that of histological fractal analysis.
The box counting method quantitatively describes the severity of bone disease and can be used to improve the current diagnostic techniques. Updike et al. [10] found that the fractal analysis determined the differences between the bones affected and not affected by periodontal diseases.
Coşgunarslan et al. [11] evaluated 240 DPRs of lactating (3–6 months duration) and nulliparous women by the fractal box counting method and found a significant difference between the FD values of the cancellous bone but no significant difference between the FD values of the cortical bones. This observation may have resulted from the fact that fractals affect cortical bone much later than the cancellous bone. Further study is needed to assess fractal analysis of the cortical bones.
Fractal dimension values on dental radiographs have been reported to differ between dentate and edentulous patients [19]. Moreover, the quality of trabecular bone architecture can be determined with fractal analysis on direct digital dental radiographs.
Zeytinoğlu et al. [15] reported significantly reduced mean FD values of the peri-implant trabecular bone at 6 months after prosthetic loading. Contrastingly, Mu et al. [14] found significant increase in the mean fractal dimension at 12 months after prosthetic loading. According to our results, the mean fractal dimension values decreased at 6–12 months after implant loading, but no significant difference was found.
There are some limitations of this study. One of them is the limited sample number of the failed implants. To assess the required sample size, power analyses were conducted. Unfortunately, we have limited number of follow-up radiographs of patients with failed implants. This study may be useful as a pilot study for further studies with much more sample size. Second, although periapical radiography is a high-resolution intraoral imaging method for FD analysis, panoramic radiographs were used because this study was retrospective. Finally, in this study, the ROI selection was not a specific frame size. The effect of ROI position and size on FD measurements is unclear. It has been proved that determining the exact ROI location and size may not make a significant difference, but there is no consensus on this idea [26].
Conclusion
Fractal analysis is a useful method to measure the trabecular microstructure of bone in nonstandardized dental radiographs. The present study has a low power to reject the null hypothesis because of the low number of cases of failed implants. Therefore, further studies with a large sample size are warranted. Assessing a series of studies can provide certain cut-off values; this can enable to routinely use fractal analysis to assess bone quality on radiological images before implantation in clinical settings.
Availability of data and materials
Not Applicable
Abbreviations
- DPRs:
-
Dental panoramic radiographs
- FD0:
-
Fractal dimension 0 (preoperative)
- FD1:
-
Fractal dimension 1 (0–1 months of follow-up)
- FD2:
-
Fractal dimension 2 (1–3 months of follow-up)
- FD3:
-
Fractal dimension 3 (6–12 months of follow-up)
- FD4:
-
Fractal dimension 4 (12 + months of follow-up)
- CBCT:
-
Cone beam computed tomography
- ROI:
-
Region of interest
References
Mandelbrot BB. The fractal geometry of nature: WH freeman New York; 1983.
Sánchez I, Uzcátegui G. Fractals in dentistry. Journal of dentistry. 2011;39(4):273–92.
Boutroy S, Bouxsein ML, Munoz F, Delmas PD. In vivo assessment of trabecular bone microarchitecture by high-resolution peripheral quantitative computed tomography. The Journal of Clinical Endocrinology & Metabolism. 2005;90(12):6508–15.
Eblen-Zajjur A, Salas R, Vanegas H. Fractal analysis of spinal dorsal horn neuron discharges by means of sequential fractal dimension D. Computers in biology and medicine. 1996;26(1):87–95.
Weibel ER. Fractal geometry: a design principle for living organisms. American Journal of Physiology-Lung Cellular and Molecular Physiology. 1991;261(6):L361–L9.
Zamir M. On fractal properties of arterial trees. Journal of theoretical biology. 1999;197(4):517–26.
Huh K-H, Yi W-J, Jeon I-S, Heo M-S, Lee S-S, Choi S-C, et al. Relationship between two-dimensional and three-dimensional bone architecture in predicting the mechanical strength of the pig mandible. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology. 2006;101(3):363–73.
Ruttimann UE, Webber RL, Hazelrig JB. Fractal dimension from radiographs of peridental alveolar bone: a possible diagnostic indicator of osteoporosis. Oral surgery, oral medicine, oral pathology. 1992;74(1):98–110.
Southard TE, Southard KA, Jakobsen JR, Hillis SL, Najim CA. Fractal dimension in radiographic analysis of alveolar process bone. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology. 1996;82(5):569–76.
Updike SX, Nowzari H. Fractal analysis of dental radiographs to detect periodontitis-induced trabecular changes. Journal of periodontal research. 2008;43(6):658–64.
Coşgunarslan A, Canger EM, Çabuk DS, Kış HC. The evaluation of the mandibular bone structure changes related to lactation with fractal analysis. Oral radiology. 2019:1–10.
dos Santos CL, Jacobs R, Quirynen M, Huang Y, Naert I, Duyck J. Peri-implant bone tissue assessment by comparing the outcome of intra-oral radiograph and cone beam computed tomography analyses to the histological standard. Clinical oral implants research. 2011;22(5):492–9.
Ilhan B, Güneri P, Saraçoglu A, Koca H, Boyacioglu H. A comparison of fractal dimension values of peri-implant bone and healthy contralateral side using panoramic radiographs. Journal of Oral and Maxillofacial Radiology. 2015;3(1):1.
Mu T-J, Lee D-W, Park K-H, Moon I-S. Changes in the fractal dimension of peri-implant trabecular bone after loading: a retrospective study. Journal of periodontal & implant science. 2013;43(5):209–14.
Zeytinoğlu M, İlhan B, Dündar N, Boyacioğlu H. Fractal analysis for the assessment of trabecular peri-implant alveolar bone using panoramic radiographs. Clinical oral investigations. 2015;19(2):519–24.
Baksi BG, Fidler A. Image resolution and exposure time of digital radiographs affects fractal dimension of periapical bone. Clinical oral investigations. 2012;16(5):1507–10.
Jolley L, Majumdar S, Kapila S. Technical factors in fractal analysis of periapical radiographs. Dentomaxillofacial Radiology. 2006;35(6):393–7.
Shrout MK, Potter BJ, Hildebolt CF. The effect of image variations on fractal dimension calculations. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology. 1997;84(1):96–100.
Yasar F, Akgunlu F. The differences in panoramic mandibular indices and fractal dimension between patients with and without spinal osteoporosis. Dentomaxillofacial radiology. 2006;35(1):1–9.
Ibrahim N, Parsa A, Hassan B, Van der Stelt P, Wismeijer D. Diagnostic imaging of trabecular bone microstructure for oral implants: a literature review. Dentomaxillofacial Radiology. 2013;42(3):20120075.
Huh K-H, Baik J-S, Yi W-J, Heo M-S, Lee S-S, Choi S-C, et al. Fractal analysis of mandibular trabecular bone: optimal tile sizes for the tile counting method. Imaging science in dentistry. 2011;41(2):71–8.
White SC, Rudolph DJ. Alterations of the trabecular pattern of the jaws in patients with osteoporosis. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology. 1999;88(5):628–35.
Geraets WG, van der Stelt PF, Netelenbos CJ, Elders PJ. A new method for automatic recognition of the radiographic trabecular pattern. Journal of Bone and Mineral Research. 1990;5(3):227–33.
Bollen A, Taguchi A, Hujoel P, Hollender L. Fractal dimension on dental radiographs. Dentomaxillofacial Radiology. 2001;30(5):270–5.
White SC, Pharoah MJ. Oral radiology-E-Book: principles and interpretation: Elsevier Health Sciences; 2014.
Shrout MK, Hildebolt CF. Potter BJ The effect of varying the region of interest on calculations of fractal index. Dentomaxillofacial Radiology. 1997;26(5):295–8.
Acknowledgements
We would like to thank Editage (www.editage.com) for English language editing.
Funding
The work was supported by the Department of Oral & Maxillofacial Radiology, Nuh Naci Yazgan University in Kayseri, Turkey.
Author information
Authors and Affiliations
Contributions
AGG collected the patient data. HCK performed the measurements of the images, and was a major contributor in writing the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki declaration and its later amendments or comparable ethical standards.
Consent for publication
Informed consent was obtained from all individual participants included in the study.
Competing interests
Hatice Cansu Kış and Ayşegül Güleryüz Gürbulak declare that they have no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kış, H.C., Güleryüz Gürbulak, A. Evaluation of the peri-implant bone trabecular microstructure changes in short implants with fractal analysis. Int J Implant Dent 6, 13 (2020). https://doi.org/10.1186/s40729-020-00209-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40729-020-00209-7