Abstract
Background
After two decades of extensive microbiome research, the current forefront of scientific exploration involves moving beyond description and classification to uncovering the intricate mechanisms underlying the coalescence of microbial communities. Deciphering microbiome assembly has been technically challenging due to their vast microbial diversity but establishing a synthetic community (SynCom) serves as a key strategy in unravelling this process. Achieving absolute quantification is crucial for establishing causality in assembly dynamics. However, existing approaches are primarily designed to differentiate a specific group of microorganisms within a particular SynCom.
Results
To address this issue, we have developed the differential fluorescent marking (DFM) strategy, employing three distinguishable fluorescent proteins in single and double combinations. Building on the mini-Tn7 transposon, DFM capitalises on enhanced stability and broad applicability across diverse Proteobacteria species. The various DFM constructions are built using the pTn7-SCOUT plasmid family, enabling modular assembly, and facilitating the interchangeability of expression and antibiotic cassettes in a single reaction. DFM has no detrimental effects on fitness or community assembly dynamics, and through the application of flow cytometry, we successfully differentiated, quantified, and tracked a diverse six-member SynCom under various complex conditions like root rhizosphere showing a different colonisation assembly dynamic between pea and barley roots.
Conclusions
DFM represents a powerful resource that eliminates dependence on sequencing and/or culturing, thereby opening new avenues for studying microbiome assembly.
Video Abstract
Similar content being viewed by others
Background
Plant roots are colonised by a vast diversity of microorganism, with Proteobacteria and Actinobacteria amongst the most abundant groups [1,2,3]. These soil microorganisms are recruited in different root niches, including rhizosphere (few mm from root), rhizoplane (root surface) and endosphere (microbes between root cells) [4]. Furthermore, plants exude up to 20% of their fixed carbon into the rhizosphere thereby shaping their root microbiome, which in turn influences plant growth [5,6,7]. This two-way dialogue alters plant fitness, is crucial in nutrient cycling, promotes plant growth, primes plant defences and controls pathogens [3, 8,9,10].
The last two decades have seen an explosion in microbiome research on plants, animals and humans. Most plant studies have analysed microbiome composition by amplicon or genome sequencing under multiple conditions, including species and soil type [11,12,13]. More recently, use of synthetic DNA spikes enables absolute quantification of microbiome members directly in environmental samples [14]. The cutting-edge challenge is to now move beyond describing and classifying microbiomes, to understand the mechanisms of microbiome assembly. However, due to the vast diversity of microbes, this has proved to be technically challenging.
A key strategy to understand microbiome assembly is to establish a simpler representative/synthetic community (SynCom) to study and fine tune plant–microbe interactions. One of the pivotal decisions to make when designing a SynCom is the choice of size, which mainly depends on the objective of the study to perform. Vorholt et al. [15] defined that a high-complexity SynCom (more than 100 members) aims to represent the original microbiome by maintaining the diversity and thereby reducing the risk of losing keystone species and essential microbe-microbe interactions. On the other hand, in a low-complexity SynCom (less than ten members), the stochasticity is reduced, which increases experimental reproducibility and therefore it can establish a more accurate causality [15]. Most SynComs are an attempt to produce a microbial culture collection with minimal strains representative of the original phylogenetic diversity [16]. The profile, represented by the relative abundance of each strain in the assembled SynCom, is used as a phenotype under different conditions. An example is how the absence of coumarin, or the lack of cuticle biosynthesis, shifted the SynCom composition in Arabidopsis thaliana [17, 18]. A 185-member SynCom was used to interrogate the capacity of root growth inhibition (RGI), showing that Variovorax and related species within the SynCom have the capability to suppress RGI by manipulating plant hormone levels through auxin degradation [19]. SynComs can improve plant yield, as shown by the 22-member sugarcane community which displaced 54% of the natural rhizosphere microbiota and increased sugarcane fresh weight 3.4-fold compared to non-inoculated plants [20]. Whilst relative abundance quantification provides valuable insights, the power of absolute quantification reveals that specific microbial groups can maintain steady or increasing absolute abundance, even in scenarios where their relative abundances may decrease [14]. Absolute quantification emerges as a superior approach, offering a more accurate understanding of microbiome assembly dynamics and mitigating potential biases inherent in relative measurements. Nui et al. [21] measured the absolute abundance of each bacterial strain within a seven-member maize SynCom by complex culturing, including testing of 288 growth media and antibiotics combinations. The seven-membered community was stable on roots, where Enterobacter cloacae AA4 was a keystone species, as its absence led to collapse of the SynCom. This research highlights that one of the principal challenges in studying microbiome assembly is the identification and quantification of different bacteria during colonisation. Most SynCom studies rely on 16S RNA sequencing to describe assembly of the community, which only reveals relative microbial abundance on the roots. In contrast, differential culturing as used by Niu et al. [21] allows for experimental intervention and establishes causality in microbiome assembly, although it is labour-intensive and limited to the specific organisms for which it was developed.
Bacterial communities can be visualised and differentiate in situ by applying techniques based on the hybridisation of fluorescently labelled antisense 16S rRNA probes (FISH), which can be designed for broad groups (e.g. Actinobacteria or Betaproteobacteria), or for specific strains [2, 3, 22, 23]. FISH was applied to a seven-member SynCom in which each strain-specific probe was labelled to a particular fluorescent protein which can be distinguished by image deconvolution [24]. However, FISH has limitations such as cell loss during sample fixation and low accuracy due to an imperfect probe coverage or reduced bacterial membrane permeability [25, 26]. In small SynComs, fluorescent proteins can be expressed in bacteria; however, the limitation is the number of distinguishable ones used at the same time. Whitaker et al. [27] developed a technique with six unique fluorescent signatures by utilising two fluorescent proteins (GFP and mCherry) with different ribosome binding site (RBS)s to provide varied expression levels. When applied to a Bacteroides six-member SynCom colonising the guts of mice, each strain could be differentiated by linear deconvolution. Whilst this works well with strains of the same species, interspecies differentiation based on fluorescence intensity of a single fluorescent protein would require laborious tuning of expression.
The aforementioned limitations led us to develop a remarkably simple differential fluorescent marking (DFM) method using three fluorescent proteins (mTagBFP, sYFP2 and mCherry) with distinct excitation and emission spectra, allowing simultaneous detection by flow cytometry or fluorescence microscopy. Using the DFM strategy, we generate and distinguish six fluorescence patterns, i.e. three single fluorescent proteins and three combinations of two. Plasmid-based protein expression can lead to issues such as gene dosage-dependent toxicity, as well as plasmid stability and host-range. Therefore, we adapted a mini-Tn7 delivery system [28] to generate the plasmid Tn7 suicidal low COPY for universal transfer (pTn7-SCOUT) family, enabling integration of transgenes downstream of the highly conserved chromosomal glmS gene in bacteria [29]. This approach is compatible with our modular and hierarchical cloning system, BEVA [30]. We tested DFM in Rhizobium leguminosarum bv. viciae 3841 (Rlv3841) and applied it to a six-member synthetic community (OxCom6), consisting of Alpha-, Beta- and Gammaproteobacteria. Using flow cytometry, we both differentiated and quantified the assembly of individual members of OxCom6 in nutrient-rich media and during colonisation of pea and barley roots. Our results demonstrate that DFM is an outstanding resource for tracking and distinguishing bacterial communities both in vitro, but more importantly, in diverse and complex environmental settings.
Material and methods
Primer and plasmids
Primer and plasmids used in this study are shown in Table S1 and Table S2, respectively. All pTn7-SCOUT plasmids are available in Addgene, see Table S3 for codes.
Bacterial media and growth conditions
Bacterial strains used in this work are listed in Table S4. Escherichia coli strains were grown in LB [31] at 37 °C, supplemented with antibiotics at the following concentrations: ampicillin (Ap) 100 µg·mL−1, gentamicin (Gm) 10 µg·mL−1, kanamycin (Km) 20 µg·mL−1, tetracycline (Tc) 10 µg·mL−1 and, spectinomycin (Sp) 50 µg·mL−1. The remaining strains were grown in rich Tryptone Yeast (TY) media [32] supplemented with 20 mM succinate at 28 °C, unless specified otherwise. The following antibiotic concentrations were used: Rhizobium leguminosarum bv. viciae (Rlv3841) Gm 20 µg·mL−1, neomycin 40 µg·mL−1, Tc 5, Sp 100 µg mL−1; Ochrobactrum pituitosum AA2 and Pseudomonas fluorescens SBW25 Gm 20 µg·mL−1; Enterobacter cloacae AA4 Km 20 µg·mL−1. Achromobacter xylosoxidans AT1 Km 100 µg·mL−1 and Azoarcus olearius DQS-4 Sp 200 µg·mL−1. For the assessment of Rlv3841 labelled with DFM (Rlv3841DFM), mean generation time (MGT) strains were grown in UMS [33] supplemented with 10 mM glucose and 10 mM NH4Cl.
Plasmids were transformed into chemically competent E. coli strains DH5\(\mathrm{\alpha }\), Transformax™ EC100D™ pir+ (Lucigen) and Transformax™ EC100D™ pir-116 (Lucigen). Except for the pTn7-SCOUT plasmids which were introduced into recipient bacteria by triparental conjugation with E. coli DH5\(\mathrm{\alpha }\) as plasmid donor and E. coli HB101 with the helper plasmid pRK2013 [34]. The pTn7-SCOUT plasmids were conjugated by tetraparental conjugation using E. coli Transformax™ EC100D™ pir+ as plasmid donor, E. coli S17-1 containing pTNS3 as transposase and E. coli pRK2013 as helper. Nitrofurantoin 10 µg·mL−1 was used to counter select against E. coli strains.
Construction of pTn7-SCOUT plasmids
The pUC18R6KT-mini-Tn7T-Km [28] was obtained from Addgene (catalogue no. 64969) and used as a scaffold to generate the Golden Gate level 1 master plasmid pTn7-SCOUT10. BsaI and Esp3I restrictions sites (RS) were removed, and two cloning sites added: a Golden Gate level 1 cloning site and an Esp3I cloning site to allow addition of antibiotic markers (Fig. 1). Five different fragments were generated by PCR and assembled by Golden Gate using BpiI. The first fragment was amplified using oxp3349-oxp3350 from the pUC18R6KT-mini-Tn7T-Km multicloning site (MCS) to the BsaI RS located in the ampicillin resistance marker (ApR), changing a nucleotide in a serine codon (748A > G). The second fragment was amplified with oxp3351-oxp3352 from the BsaI RS located in ApR to two Esp3I RS located in the plasmid backbone between the ApR and R-Tn7. The third fragment was amplified with oxp3353-oxp3354 from the Esp3I RS in the backbone plasmid to a region between the flippase recognition site (FRT) site and 3′-end of the KmR. The fourth fragment was amplified with oxp3355-oxp3356 from the region between 5′-end of KmR and FRT site to the mini-Tn7 MCS. The fifth fragment was amplified with oxp2980-oxp2981 from pOGG093 plasmid [30], which amplifies the Golden Gate level 1 cloning site containing the Plac::lacZ\(\mathrm{\alpha }\)-T0 region. Fragments were amplified with DNA polymerase Q5 (NEB), cleaned (GeneJet PCR purification kit, Thermo Fisher), assembled by Golden Gate with BpiI as described by Geddes et al. [30], cloned in Transformax™ EC100D™ pir-116 (Lucigen), miniprepped, and Sanger sequenced. pTn7-SCOUT10 has BsaI RS compatible with Golden Gate level 1 assembly and lacZ\(\mathrm{\alpha }\) as cloning marker, resulting in blue/white colony colour selection when plated on media supplemented with X-gal 50 µg·mL−1.
To generate the Golden Gate level 2 master plasmid pTn7-SCOUT20, a new selection marker was constructed. The chromogenic gene tsPurple expression cassette was amplified from pOPS1522 with oxp4051-oxp4052, cloned into pTn7-SCOUT10 by Golden Gate using BsaI, transformed in Transformax™ EC100D™ pir-116 (Lucigen), miniprepped and Sanger sequenced. pTn7-SCOUT20 has BpiI RS compatible with Golden Gate level 2 assembly and tsPurple as cloning marker, resulting in purple/white colony colour selection.
The antibiotic resistance cassettes within the mini-Tn7 were cloned in pTn7-SCOUT10 and pTn7-SCOUT20 by a Golden Gate reaction using Esp3I. The pLVC-P2 modules of the gentamicin resistance marker (GmR, pOGG009), tetracycline resistance marker (TcR, pOGG042) and kanamycin resistance marker (KmR, pOGG008) were used [30]. The spectinomycin resistance marker (SpR) was amplified with oxp3357-oxp3358 from pUC18T-mini-Tn7T-aad9 [35] and cloned by Golden Gate reaction with Esp3I. A family of pTn7-SCOUT plasmids was generated: level 1 pTn7-SCOUT11 (GmR), pTn7-SCOUT12 (KmR), pTn7-SCOUT13 (TcR), pTn7-SCOUT14 (SpR); and level 2 pTn7-SCOUT21 (GmR), pTn7-SCOUT22 (KmR), pTn7-SCOUT23 (TcR), pTn7-SCOUT24 (SpR) (see Table 1, Table S2).
Development of compatible flippase plasmids
The antibiotic marker within the mini-Tn7 is flanked by FRT sites, allowing its excision from the chromosome by yeast recombinase flippase (Flp) following mini-Tn7 insertion [28]. The pFLP2 plasmid [36] with AmpR was obtained from Herbert P. Schweizer. The sacB-flp-cI genes were amplified with oxp3417-oxp3418, purified and assembly by Golden Gate with BsaI into the destination vectors pOGG024 (GmR), pOGG023 (KmR) and pOGG277 (TcR). Three new pFLP2 plasmids were generated pFlp-Km (pOPS1466; flp-cl-sacB-pL1V-Lv1-neo-pBBR1-ELT3), pFlp-Gm (pOPS1467; flp-cl-sacB-pL1V-Lv1-gent-pBBR1-ELT3) and pFlp-Tc (pOPS1468; flp-cl-sacB-pL1V-Lv1-TetAR-pBBR1-ELT3), (Table 1, Table S2).
Assembly of Golden Gate plasmids
Assembly of plasmids was done by Golden Gate as described by Geddes et al. [30]. Esp3I was used for the assembly of level 1 cloning plasmids (pL1V-Lv1), BsaI for the assembly of the expression cassette into level 1 plasmids and BpiI for assembly of level 1 modules into level 2 plasmids. Specific details about each plasmid construction are described in Supplementary Methods.
att amplification, sequencing and analysis
DNA extraction from each DFM strain was achieved by alkaline lysis (0.05 M NaOH, 0.25% SDS) [37], and used as a template to amplify by PCR the region from the 3′-end of glmS to Tn7-R. Primer PTn7R [28] on Tn7-R was used as a reverse primer and a specific forward primer was designed for each strain (see Table S1). Amplification was carried out in a 50 µL PCR reaction containing 5–10 ng of isolated DNA and 2 U of Q5 DNA polymerase (NEB). PCR products were visualised on 1% agarose gels, purified (Monarch® PCR & DNA Cleanup kit, NEB) and Sanger sequenced (Eurofins). Alignment of sequences was performed using MUSCLE [38] implemented in MEGA X software [39]. The alignment consensus was calculated in Jalview [40].
Development and assessment of landing pad introduction into strains
To construct the Sinorhizobium meliloti CL150 containing the landing pad (SmLP), we followed the same procedure as described by Haskett et al. [41]. Firstly, a 282 bp fragment containing the Tn7 attB site using oxp3192 and oxp3193 primers was PCR-amplified from Rlv3841 chromosome (Table S1). Secondly, 1 kb DNA fragments of two flanking regions of the harbour site [42] of S. meliloti CL150 were amplified using primer pairs oxp3190-oxp3191 and oxp3194-oxp3195. These three fragments were assembled by HiFi (NEB) with pK19mobSacB digested with SmaI, resulting in plasmid pOPS1246. Plasmid pOPS1246 was introduced into S. meliloti CL150, and sucrose selection [43] was used to stably integrate the Tn7 attB site of Rlv3841 (landing pad) into a harbour site in the chromosome by homologous recombination, resulting in SmLP strain.
To test mini-Tn7 integration specificity into the landing in Azorhizobium caulinodans ORS571 containing landing pad (AcLP) and SmLP, two sets of primer pairs were used to PCR-amplify the 5′-end of the Rlv3841 attB-containing site fragment to Tn7-R (oxp2986 and oxp1390) and the Tn7-L to the 3′-end of the Rlv3841 attB-containing site fragment (PTn7L and oxp5053).
Counterselection for Flp-containing plasmids
Rlv3841 containing a mini-Tn7-Gm-sfGFP (Rlv3841G-Gm) was conjugated with pOPS1468 (flp-cl-sacB-pL1V-Lv1-TetAR-pBBR1-ELT3), and colonies selected on TY containing Tc. Transconjugants were pooled and plated on TY supplemented with sucrose (12%). Fifty colonies were patched on TY media with and without Tc. Strains unable to grow on Tc were PCR-tested with primers oxp3878 and oxp3879, which bind between T0 and T1 and on FRT sequence. Two bands of 272 bp and 1240 bp were present in Rlv3841G-Gm, but only the 272 bp band in the Rlv3841G, which confirms excision of the Gm cassette.
Microscopy images
Microscopy images were taken of cultures of Rlv3841DFM strains growing on TY agar plates using a Leica M165FC. Detection of fluorescent proteins was as follows: mTagBFP with ET BFP filter (10,450,329, excitation: 405/20 nm, barrier: 460/40 nm) and exposure time 0.7 s; sYFP2 with ET YFP filter (10,447,410, excitation: 500/20 nm, barrier: 535/30 nm) and exposure time 1 s; and mCherry with ET mCherry filter (10,450,195, excitation: 560/40 nm, emission: 630/74 nm) and exposure time 0.2 s. Gain was set at 1 × , saturation at 1.0 and gamma at 1.01 for all images.
A mix containing equal amounts of cultures of Rlv3841DFM and unlabelled were imaged with a Zeiss LSM 880 Airy Scan confocal microscope and analysed with ZEN Black v 3.6 software. To visualise fluorescent tags, mCherry was excited with a 561 nm wavelength laser and detected between 598 and 649 nm, sYFP2 was excited with a 488 nm wavelength laser and emission detected between 498 and 562 nm and mTag was excited with a 405 nm wavelength laser and emission detected between 440 and 490 nm. Two channels were used for the overlapping excitation and emission of sYFP2 and mTag. Channel one excited and detected mCherry and mTag, channel two excited and detected sYFP2.
Flow cytometry
An Amnis® Cellstream® (Luminex Ltd.) flow cytometer with autosampler, equipped with 405 nm, 488 nm and 561 nm to excite TagBFP, sfGFP/sYFP2 and mCherry respectively, was used. Flow rates were set to low speed/high sensitivity (3.66 µL·min−1) and 5000–20,000 events defined by our gating parameters as Bacteria population were counted for each sample. Using Cellstream® Analysis 1.3.384 software, the Bacteria population was defined as the concentrated events area when plotting size (FSC) and granularity (SSC). The bacteria population was afterwards gated based on FSC (threshold > 0) and the aspect-ratio of SSC (threshold > 0.4) defining the Singlets population. Then Singlets events were gated based on their fluorescence emission, generating three colour populations: Red, Yellow and Blue for each fluorescent protein, mCherry, sYFP2 and TagBFP, respectively. The Red population are singlets events detected in the 561–611/31 channel above 550 FI units. The Yellow population are singlets events detected 488–528/46 channel above 500 FI units. The Blue population are singlets events detected in the 405–456/51 channel above 450 FI units (Fig. S1). Afterwards, we created six Combined populations defined as presence absence of Red, Yellow and Blue colour populations. R population (exclusively Red), Y (exclusively Yellow), B (exclusively Blue), RY (exclusively Red and Yellow), RB (exclusively Red and Blue) and YB (exclusively Yellow and Blue). For instance, an event will be assigned to the R population if belongs to the Red population whilst not belonging to either the Yellow or Blue population. This implies that only signals for mCherry detection were observed. The number of events·mL−1 (emL) was recorded for each Combined population in each sample and transformed into events·g root−1 (egr). All flow cytometer data is available at http://flowrepository.org, experiment codes are shown in Table S5.
Growth curves to assess growth fitness
To calculate the MGT of each Rlv3841, strain labelled with DFM was grown in minimum media (UMS, [33]). A single colony of bacteria was streaked onto 10 mL UMS agar slopes supplemented with 10 mM glucose and 10 mM NH4Cl and incubated for 2 days. Cultures were resuspended in 4 mL of UMS supplemented with 10 mM glucose and 10 mM NH4Cl and washed three times. The OD600nm was measured and 400 µL of 107 cells·mL−1 were inoculated into 24-well plates (Vision Plate™, 4titude) and incubated in a plate reader (FLUOstar Omega, BMG Labtech) for 72 h, 700 rpm, 28 °C. MGT was calculated as the number of h it takes the population to double whilst in exponential growth phase [44].
Inoculum preparation for pea root colonisation
A single colony of bacteria was streaked in 10 mL of TY supplemented with 20 mM succinate agar slopes in 30 mL universal tubes. For E. cloacae AA4, O. pituitosum AA2 and P. fluorescens SBW25 cultures were incubated overnight. A. xylosoxidans AT1 cultures were incubated for 1 day and A. olearius DQS-4 and Rlv3841 for 2 days. Once grown, cultures were resuspended in 4 mL of sterile 0.9% NaCl. OD600 nm was measured and cultures were set at 109 cells·mL−1. For competition and community experiments, cultures were mixed in equal ratios at 109 cells·mL−1. Inocula were diluted to 105 cells·mL−1 and 1 mL was added to each plant.
Root colonisation experiment
Pea seeds were sterilised in ethanol 70% for 1 min, followed by 5 min in 3% NaClO. Barley seeds were sterilised in ethanol 70% for 1 min, followed by 5 min in 7% NaClO plus 0.1% Tween20 (Sigma-Aldrich). Seeds were washed with sterile distilled water. Pea seeds were pregerminated on agar-water 0.8% for 3 days at 23 °C in the dark, and after 3 days were transferred into sterilised boiling tubes containing fine vermiculite and 25 mL of root nutrient solution [45]. Sterilised barley seeds were transfer into boiling tubes containing fine vermiculite and 25 mL of root nutrient solution [45]. At 7 days after sterilisation, each seed was inoculated with a total of 105 cells. At 7 days post-inoculation (dpi) (1 to 14 dpi for assembly dynamics experiment), plants were harvested by inverting and shaking the tubes. Roots were dipped in sterilised water to remove loosely attached vermiculite, separated from seed, and shoot by cutting the root below the seed, weighed, and transferred to 50-mL Falcon tubes. Then, 25 mL harvest solution (0.9% NaCl, 0.02% Silwet L-77) was added and vortexed at maximum speed for 1 min. Further, 1 mL was passed through 40 µm filters (FLOWMI™ cell strainers) and 100 µL of each sample was transferred to 96-well u-bottom plates for single cell quantification using Amnis® Cellstream® (Luminex Ltd.) flow cytometer.
Quantification of background from plant roots
Uninoculated pea and barley plants were grown for 14 days, and samples were treated as described above. For each DFM population, emL was recorded and converted into egr. The values obtained were defined as root background and subtracted from total egr obtained from samples with bacterial inoculation (Table S6).
Statistical analysis
Statistical analyses were performed on Prism 10 v10.02.
Nitrogenase activity
Nitrogenase activity of A. olearius DQS-4 and A. olearius DQS-4 labelled with sYFP2 (AoDQS-4Y) on barley plants was assessed as described by Haskett et al. [41].
Results
Development of pTn7-SCOUT plasmids
Genomic integration of fluorescent markers is crucial for gene stability when studying bacteria in complex environments, due to the absence of plasmid-associated antibiotic selection [46]. However, fluorescent protein expression must be tuned to ensure sufficient levels of protein required for detection by microscopy and flow cytometry, whilst also avoiding toxicity due to overexpression. To overcome this challenge, we generated the pTn7-SCOUT (plasmid Tn7 Suicidal low COpy for Universal Transfer) as a family of mini-Tn7 delivery plasmids that are compatible with BEVA modular Golden Gate cloning, and which only replicate in strains containing the pir genes [30, 47]. The pTn7-SCOUT plasmid family facilitates the chromosomal integration of multiple expression cassettes in a diverse group of Proteobacteria. This can be applied, as shown in this work, for tracking bacterial community through the quantification of fluorescent protein.
To develop the master pTn7-SCOUT10 (Fig. 1), we used the pUC18R6K-mini-Tn7T-Km developed by Choi et al. [28] as a scaffold. First, BsaI and Esp3I RS present in the pUC18R6K-mini-Tn7T-Km plasmid were mutated since BsaI and Esp3I sites are used for level 1 and antibiotic marker cloning, respectively. Secondly, the KmR located in the mini-Tn7 between the FRT sites was replaced with an Esp3I cloning site to allow for addition of different selection markers. Lastly, the MCS located in the mini-Tn7 was substituted with a level 1 Golden Gate cloning site (lacZ\(\mathrm{\alpha }\)) for blue to white selection, which facilitates the assembly of one expression cassette by using BsaI. To enable the assembly of multiple expression cassettes, we generated the level 2 master plasmid pTn7-SCOUT20 by replacing the pTn7-SCOUT10 cloning site with a level 2 (tsPurple) for purple to white selection. Finally, we independently cloned the antibiotic markers, gentamicin (GmR), kanamycin (KmR), tetracycline (TcR) and spectinomycin (SpR) by Golden Gate reaction into the Esp3I cloning site, generating the pTn7-SCOUT family (Table 1).
The pTn7-SCOUT plasmid family. Engineering the plasmid pUC18R6K-miniTn7T-Km for BEVA plasmid assembly compatibility. The plasmid was altered by removing three restriction sites (RS) and introducing two new cloning site—a designated antibiotic site and a Level 1/Level 2 site. The schematic representation includes key elements: a yellow line with a dot above indicating the Esp3I RS and blue line with a dot above indicating BsaI RS. A black inverted triangle represents the original plasmid’s multi-cloning site. Inverted blue and purple triangles depict new BsaI and BpiI sites, respectively, facilitating Golden Gate level 1 and level 2 plasmid construction. An inverted yellow triangle designates the Esp3I RS for cloning antibiotic resistance markers, located between the FRT sites (flippase recognition site, green circle). pL0M corresponds to Level 0 modules used to assemble expression cassettes in pTn7-SCOUT10. The promoter module (pL0M-P) is represented as an arrow, the ribosome binding site module (RBS, pL0M-U) as a semicircle, the gene module (pL0M-SC) as a horizontal black arrow and the terminator module (pL0M-T) represented as a “T”. pL1M corresponds to level 1 modules, representing assembled expression cassettes (promoter-RBS-gene-terminator), for constructing multiple expression cassettes in pTn7-SCOUT20. The right (Tn7-R) and left (Tn7-L) sites of the mini-Tn7 transposon are depicted in pink and blue, respectively. The cloning marker for pTn7-SCOUT10 cloning (lacZ\(\mathrm{\alpha }\)) and for pTn7-SCOUT20 cloning (tsPurple) are indicated in blue and purple, respectively
The existence of a FRT site on either side of the antibiotic expression cassette on mini-Tn7 means that, following integration, the antibiotic marker can be removed using the Flp. To facilitate this, we also developed new antibiotic versions of the pFLP2 plasmid (flp, cI, sacB ApR [36]) (Table 1) to ensure compatibility with the strains used in this study. The Rhizobium leguminosarum bv. viciae 3841 (Rlv3841) containing the mini-Tn7-Gm-sfGFP (Rlv3841G−Gm) was conjugated with pOPS1468 (flp-Ic-sacB-Tc-pBBR) to excise the GmR from the integrated mini-Tn7. After sucrose selection, 100% of the strains were sensitive to Gm and the lack of a GmR was confirmed by PCR.
Analysis of mini-Tn7 integration delivered by pTn7-SCOUT
In the model bacteria Escherichia coli, integration of the Tn7 transposon occurs downstream of the glmS gene [48]. Different strains of Alpha-, Beta- and Gammaproteobacteria were tested for mini-Tn7 integration delivered by pTn7-SCOUT and its integration site was assessed. The region from the 3′ end of glmS gene to the upstream end of the mini-Tn7 (Tn7-R) was PCR amplified and sequenced (see Table S1 for primers). Nucleotide alignment of the Tn7 integration site for these strains revealed that, as previously observed in E. coli K12 and Pseudomonas aeruginosa PAO1 [28, 48], Tn7 integration occurs 25 bp from the glmS stop codon (Fig. 2). However, in P. protegens Pf-5 and Achromobacter xylosoxidans AT1, integration occurs 24 bp downstream of glmS, and in Azoarcus olearius DQS-4 and Enterobacter cloacae AA4 at 26 bp. Whilst 90% of the time the Tn7 transposon integrates 25 bp downstream glmS in E. coli K12, it has been shown to integrate at a lower frequency, at either 24 bp or 26 bp downstream [29, 48]. Therefore, the different integration locations (attB) identified among the strains tested could be related to the nature of Tn7 integration itself rather than a strain-specific effect. Upon Tn7 integration there is a duplication of 5 bp immediately upstream to attB site [29]. Our results show that there is no conservation in this 5 bp sequence, suggesting that Tn7 does not require a specific recognition sequence for integration, but rather integrates at a specific distance from the glmS gene (Fig. 2).
Alignment of the attTn7-attB region. Nucleotide alignment of the 3′-region of the glmS gene—attB site across various tested Proteobacteria. The highlighted area in the alignment shows the differences in the distance from the stop codon of the glmS gene to the Tn7 integration site (attB). Coordinate 0 corresponds to the central nucleotide of the 5 bp sequence that duplicates after Tn7 integration (green rectangle). The 3′-end of the glmS gene is denoted by the blue arrow, whilst the att Tn7 sequence is represented by the yellow rectangle. The pink rectangle signifies Tn7-R from the mini-Tn7 transposon
Whilst we have demonstrated that Tn7 integration occurs 25 ± 1 bp from the glmS stop codon in diverse species, we found that some bacteria such Azorhizobium caulinodans ORS571 and Sinorhizobium meliloti CL150 encode a gene in this region that appear to be lethally disrupted by mini-Tn7 insertion. We have previously overcome this issue by introducing a Tn7 landing pad derived from the Rlv3841 Tn7 attB site into a neutral region of the A. caulinodans ORS571 (AcLP) chromosome by double homologous recombination. This landing pad provides an alternative, non-lethal site which permits integration by Tn7 [41]. Here, we use the same strategy to integrate the landing pad into S. meliloti CL150 chromosome at the same neutral site previously used to harbour a recombinase attB [42], creating strain SmLP. We tested the specificity of integration into these sites for AcLP and SmLP with three independent conjugation experiments and were able to isolate mini-Tn7 exconjugants of each strain harbouring the landing pad, but not for their corresponding wild-type strains, indicating the landing pads were being utilised for integration. Ten of each AcLP and SmLP colonies putatively harbouring mini-Tn7 from each of the three conjugation experiments were screened by PCR using bridging across the left Tn7 attB site and chromosomal landing pad, confirming integration at the desired site in at least 90% for AcLP (9/10, 10/10 and 9/10 colonies produced bands of the correct size) and 100% for SmLP (10/10, 10/10, and 10/10 colonies produced bands of the correct size). One amplicon generated from each independent experiment was sequenced and successfully aligned to the predicted in silico sequences to further confirm this conclusion. Clearly this landing pad strategy is robust and can be applied to most strains recalcitrant to Tn7 insertion at the native glmS position.
Expression of single and dual fluorescent markers permits differentiation of up to six bacteria
The use of single fluorescent proteins to track bacteria is widely used in plant–microbe interaction studies [49, 50], but is restricted to availability of fluorophores and an ability to detect them. Our differential fluorescent marking (DFM) strategy couples use of three distinguishable fluorescent proteins, mCherry, sYFP2 and TagBFP (Fig. S2) and mini-Tn7 stable chromosomal specific integration delivered by pTn7-SCOUT plasmids. DFM uses the aforementioned fluorescent proteins in single and double combinations to generate six unique patterns. The three single constructs are formed by cloning either, mCherry (R), sYFP2 (Y) and TagBFP (B), whilst the three doubles makers were constructed by cloning the fluorescent proteins in pairs, mCherry and sYFP2 (RY), mCherry and TagBFP (RB) and sYFP2 and TagBFP (YB).
To test our DFM strategy Rlv3841 was labelled with each DFM construction (Rlv3841R, Rlv3841Y, Rlv3841B, Rlv3841RY, Rlv3841RB and Rlv3841YB) (Table 2), spotted on agar and after two days the fluorescence of each spot was detected using a fluorescent stereomicroscope, confirming the differentiation among the six DFM patterns which are not present in the unlabelled strain (Rlv3841U) (Fig. 3A). We expanded our investigation by combining Rlv3841U and each Rlv3841DFM in equal proportions. The resulting mixture was visualised using a Zeiss LSM 880 Airy Scan confocal microscope, confirming differentiation at the single-cell level among the six distinct DFM patters and unlabelled strain (Fig. S3).
Differential Fluorescent Marking (DFM) of bacteria. Illustration of Rhizobium leguminosarum bv. viciae 3841 strains, unlabelled (Rlv3841U) and with distinct DFM combinations: Rlv3841R (mCherry), Rlv3841Y (sYFP2), Rlv3841B (mTagBFP), Rlv3841RY (mCherry and sYFP2), Rlv3841RB (mCherry and mTagBFP) and Rlv3841.YB (sYFP2 and mTagBFP). A Stereomicroscope images of Rlv3841 spots growing on rich media. The first column shows bright field images, the second 560/40–630/74 channel capturing mCherry expression, the third column presents the 500/20–535/30 channel capturing sYFP2 expression and the fourth column demonstrates the 405/20–460/40 channel capturing mTagBFP expression. Scale bars indicate 500 µm. B Flow cytometry graphs, with the y-axis showing time in seconds and x-axis displaying fluorescence intensity (FI) units on a logarithmic scale. In the first column, events are plotted in 561–611/31 channel for detecting mCherry expression (above 550 Fi units), in the second column, events are shown in the 488–528/46 channel for detecting sYFP2 expression (above 500 Fi units), and in the third column, events are depicted in the 405–456/51 channel for detecting mTagBFP expression (above 450 FI units)
Subsequently, we ran these Rlv3841DFM strains and Rlv3841U independently through a flow cytometer and used Cellstream® Analysis software to distinguish the six strains based on the presence or absence of the three fluorescent proteins (Fig. 3B). First, the bacteria population was defined as the concentrated area based on size (FSC) and granularity (SSC), followed by the definition of the Singlets population based on FSC and the aspect-ration of SSC (Fig. S1A and B). Our gating strategy is followed by the delineation of three different colour population for each fluorescent marker as follows; for mCherry expression, the Red population as events detected 561–611/31 channel above 550 FI units; for sYPF2 expression the Yellow population, events detected 488–528/46 channel above 500 FI units; and for mTagBFP expression the Blue population as the events detected in the 405–456/51 channel above 450 FI units (Fig. S1C). Afterwards, we assigned six Combined populations defined as presence or absence of the Colour populations Red, Yellow and Blue: R population (exclusively Red), Y (exclusively Yellow), B (exclusively Blue), RY (exclusively Red and Yellow), RB (exclusively Red and Blue) and YB (exclusively Yellow and Blue) (Fig. S1D). The graphs in Fig. 3B show the detection by flow cytometry of each colour population (column) for each Rlv3841DFM strain (rows), which confirms the six unique DFM patters observed with the stereomicroscopy (Fig. 3A). Next, we calculated the accuracy of our flow cytometry gating strategy to assign each Rlv3841DFM strain to its corresponding colour population, showing that more than 90% events were determined correctly, whereas Rlv3841U showed less than 1.7% of Singlets events belonging to any of these colour population (Table 3). This 1.7% misassignment of events corresponds to events detected in the Blue colour population. The accuracy of our flow cytometry gating strategy for detecting each DFM pattern was assessed by calculating the percentage of each combined population (R, Y, B, RY, RB and YB) for each Rlv3841DFM strain (Rlv3841R, Rlv3841Y, Rlv3841B, Rlv3841RY, Rlv3841RB and Rlv3841YB). The results showed an accuracy of more than 95% in assigning the correct combined population to the corresponding DFM strain with almost complete accuracy for Rlv3841B (Table 4). In this case, 99.9% of the events detected when running Rlv3841B in the flow cytometer by itself were assigned as the corresponded B Combined population (Table 4). Next, we evaluated the precision of our gating strategy in discriminating each Rlv3841DFM strain when present in a mixed sample, with an equal number of each strain. The number of events for each Combined population was calculated revealing that 1/6 of the total number of events were assigned to each Rlv3841DFM version (Table 4).
To assess if the presence of any DFM combination had a growth effect in Rlv3841, the MGT on minimum media was calculated and compared to Rlv3841U. No differences were observed for any of the Rlv3841DFM strains, neither for each antibiotic version with a sfGFP expression cassette, nor for different colour combinations (Table 5). This is consistent with previous studies showing that the fluorescent protein has no effect on the fitness when integrated in single copy using mini-Tn7 [28].
To validate the use of DFM combined with flow cytometry to assess bacterial colonisation on plant roots, we inoculated Rlv3841R onto pea and quantified colonisation 7 dpi by colony counts and flow cytometry. The number of Rlv3841R counted with flow cytometry was 6 · 105 ± 4 · 105 egr and by colony count 1.1 · 106 ± 8.6 · 105 CFU·g root−1, showing no significant differences (p value = 0.4375, Wilcoxon test), demonstrating that flow cytometry gives comparable numbers to CFU, as shown for Herbaspirillum colonising rice roots [51]. Subsequently, we tested the capacity of each Rlv3841DFM strain to grow on pea roots in single inoculation and in competition with Rlv3841U. No significant differences were observed confirming that DFM does not affect the competitive colonisation ability of the strain (Table 6). Finally, we examined the capacity to differentiate each Rlv3841DFM strain when inoculated in equal amounts on pea roots. At 7 dpi, no significant differences were observed among the Rlv3841DFM strains (Table 7).
These results confirm that DFM combined with flow cytometry can be used to simultaneously differentiate and quantify up to six bacterial strains from both liquid culture and plant samples with no deleterious effects on bacterial fitness.
Since one member of OxCom6 is capable of nitrogen fixation, we tested if the presence of mini-Tn7 affects the capacity of A. olearius DQS-4 to fix nitrogen on barley roots. The nitrogenase activity of A. olearius DQS-4 wild-type strain was 208.1 ± 44.6 nmol ethylene·plant−1 h−1, and in A. olearius DQS-4 integrated with mini-Tn7 was 176.6 ± 24 nmol ethylene·plant−1 h−1. t Test showed no significance differences between strains (p value = 0.25).
Tracking bacteria in synthetic communities using differential fluorescent markers
To test the accuracy of DFM to discriminate, track and quantify individual members in a bacterial community, a model SynCom (OxCom6) was assembled with well-characterised root-colonising strains, all of which are amenable to genetic modification. These belong to Alphaproteobacteria (Ochrobactrum pituitosum AA2, R. leguminosarum bv. viciae 3841), Betaproteobacteria (A. xylosoxidans AT1, A. olearius DQS-4) and Gammaproteobacteria (E. cloacae AA4 and P. fluorescens SBW25) [11, 21, 52,53,54]. Each member of the OxCom6 community was labelled with a specific DFM combination: O. pituitosum AA2 was labelled with mCherry (OpAA2R), R. leguminosarum bv. viciae 3841 mCherry and mTagBFP (Rlv3841RB), A. olearius DQS-4 sYFP2 (AoDQS-4Y), A. xylosoxidans AT1 sYFP2 and mTagBFP (AxAT1YB), E. cloacae AA4 mCherry and sYFP2 (EcAA4RY) and P. fluorescens SBW25 mTagBFP (PfSBW25B) (Table 2, and Table S4 for details on the strains used). The labelling of OxCom6 strain with each DFM pattern does not have any effect on fitness (Table S7) or competitive colonisation (Table S8). Similar to the observations for Rlv3841, when comparing CFU·mL−1 and events·mL−1 for each OxCom6 strains labelled with DFM, no differences were observed (Table S9). Subsequently, we monitored the assembly of OxCom6 in nutrient-rich media over a span of 96 h and on pea and barley roots for a duration 14 days (Fig. 4).
Tracking bacterial synthetic communities using DFM. Absolute quantification of each OxCom6 member: A growing in nutrient-rich media over 96 h, B colonising pea roots over 14 days and C colonising barley roots over 14 days. Solid dots represent the average, the shaded regions depict plus/minus the standard error of the mean (± SEM), with solid lines connecting the dots. In the graphs, members of OxCom6 are colour-coded as follows: Ochrobactrum pituitosum AA2R (red), Rhizobium leguminosarum bv. viciae 3841RB (purple), Azoarcus olearius DQS-4Y (yellow), Achromobacter xylosoxidans AT1YB (green), Enterobacter cloacae AA4RY (orange), Pseudomonas fluorescens SBW25B (blue). egr: events·gram root−1. emL: (events·mL−.1)
The results from the OxCom6 assembly in nutrient-rich media (Fig. 4A) revealed that EcAA4RY exhibited a robust and sustained growth, reaching a maximum count of 1.5·109 events·mL−1 (emL) within 24 h. In contrast, the other members of the OxCom6 reached a growth plateau at 61 h. OpAA2R and PfSBW25B attained peak counts of 2·108 and 1.7·108 emL respectively. Similarly, AxAT1YB and Rlv3841RB achieved comparable plateau levels, recording 8.4·106 and 8.8·106 emL correspondingly. Meanwhile, AoDQS-4Y reached a maximum growth of 4.7·106 emL. Notably, among the strains, EcAA4RY demonstrated the fastest growth rate, establishing itself as the most prolific member during the OxCom6 assembly in nutrient-rich media and therefore most abundant strain when OxCom6 assembled in rich media.
Subsequently, the assembly dynamics of OxCom6 was tracked on pea roots over 14 days (Fig. 4B). At 1 dpi, EcAA4RY emerged as the predominant coloniser, accounting for 106 egr. However, by 2 dpi, PfSBW25B displayed higher counts than EcAA4RY, recording figures of 3.7·106 ± 3.2·105 and 1.4·106 ± 7.3·105 egr respectively. This disparity became significant from 3 dpi with colonisation counts of 4.2·106 ± 2.4·106 egr for EcAA4RY and 1.7·107 ± 7.9·106 egr for PfSBW25B (paired t test p value = 0.001). Both strains achieved and sustained a plateau from 3 dpi onward, with counts circa 1.7–4.3·107 and 1.8–4.2·106 egr respectively. Starting at 10 dpi, a consistent rise was observed in the accounts of Rlv3841RB and OpAA2R. Rlv3841RB exhibited an increase from 6 to 14 dpi, rising from 1.4·106 to 4.1·106 egr, aligning its values with those of EcAA4RY. A similar pattern was evident for OpAA2R, which displayed growth from 4.9·105 to 1.7·106 egr between 9 and 14 dpi. This growth correlated positively with Rlv3841RB colonisation (Pearson r = 0.91, R2 = 0.83, p value < 10−4). Despite early events of colonisation, the Betaproteobacteria AoDQS-4Y and AxAT1YB were not consistently detected within the OxCom6 assembly on pea roots. At 2 dpi, AoDQS-4Y achieved a peak colonisation of 1.4·106 egr. However, its counts swiftly decreased to 3.5·105 egr by 3 dpi, concurring with the increase of PfSWB25B. This phenomenon finds support in a significant negative correlation between the two strains (Pearson r = -0.62, R2 = 0.38, p value = 0.03) indicating a potential displacement of AoDQS-4Y by PfSWB25B. AxAT1YB attained a maximum value of 1·106 egr root at 3 dpi, followed by a fluctuating pattern until 14 dpi, with counts ranging between values of 105·106 egr.
Finally, OxCom6 assembly dynamics were tracked on barley roots over 14 days (Fig. 4C). EcAA4RY emerged as the primary coloniser from 2 dpi onward, achieving a plateau of 2–3·107 egr by 5 dpi. The colonisation counts of PfSBW25B at 1 dpi (1.8·106 ± 2.1·106 egr) did not significantly differ from those observed for EcAA4RY (4.1·106 ± 4.4·106 egr), as indicated by the paired t test (p value = 0.08). However, PfSBW25B displayed a noteworthy decrease at 2 dpi (3.6·105 ± 8.1·104 egr), which differed significantly from the account at 1 dpi (t test p value = 0.005). Subsequently, the count of PfSBW25B’s rebounded to 5–6·106 egr by 11 dpi when it reached plateau. Despite the early competitive events, a robust positive correlation exists between EcAA4RY and PfSBW25B (Pearson r = 0.81, R2 = 0.66, p value = 0.0004). OpAA2R was initially detected at 3 dpi and maintained a consistent count between 5·105 and 106 egr up to 14 dpi. Similarly, AxAT1YB exhibited a steady colonisation on barley roots, ranging 2–5·105 egr. Rlv3841RB was only detected at 11 and 13 dpi in one and two plants respectively, indicating that its colonisation on barley roots lacked stability in the presence of other OxCom6 members. Likewise, AoDQS-4Y was detected during initial stages of colonisation (1–3 dpi) within the 5·105 to 106 egr range. Subsequently, it was detected at 9 and 13 dpi with roughly the same counts as before. The colonisation of AoDQS-4Y at 3 dpi and 9 dpi was quantified in only one plant, and at 13 dpi in two plants. AoDQS-4Y colonisation in barley roots appeared to exhibit stability during the initial colonisation events (1–3 dpi) but was subsequently outcompeted by other OxCom6 members.
Discussion
Mini-Tn7 is an excellent delivery system to use when working with a wide range of bacterial species in a non-selective environment since it is 100% stable for 100 generations in the absence of antibiotic selection [28, 55, 56]. Mini-Tn7 is broad-range as demonstrated by successful delivery into multiple strains within Proteobacteria [57, 58]. Moreover, mini-Tn7 is highly efficient and integrates in single copy into bacterial chromosomes, site- and orientation-specifically at attB Tn7, located downstream of the 3′-end of the highly conserved glmS gene [28]. In contrast to plasmids, mini-Tn7 is replicated within the chromosome, therefore it does not have a fitness cost due to copy number or replication mechanism, and it is compatible with any other cloning system [59,60,61].
Here, we developed the pTn7-SCOUT, a new family of mini-Tn7 plasmids compatible with the Golden Gate modular cloning system BEVA [30], which allowed us to rapidly tune the expression of the different fluorescent markers used in the DFM strategy. The pTn7-SCOUT family uses the suicidal R6K as origin of replication, which only replicates in the presence of pir genes supplied in trans [47]. Moreover, in pir+E. coli strains the R6K copy number is less than 15, which reduces the toxic effect of highly-expressed cassettes [62]. We replaced the MCS for either a level 1 or level 2 compatible Golden Gate cloning site, to allow the addition of single or multiple expression cassettes respectively. These Golden Gate cloning sites have blue/purple (lacZ\(\mathrm{\alpha }\) / tsPurple) to white markers to facilitate the identification of positive transformants. The presence of a Golden Gate cloning site enables the use of a vast diversity of compatible Golden Gate modules available to construct the desired fluorescent cassette [30, 63]. Nevertheless, the pTn7-SCOUT family is not restricted to Golden Gate assembly, as the level 1 and level 2 plasmids can be digested with BsaI and BpiI respectively to become entry plasmids for classic cloning such as digestion-ligation or DNA fragment assembly methods like Gibson or HiFi (NEB). Moreover, the lacZ\(\mathrm{\alpha }\) within the level 1 cloning site contains a polylinker for traditional cloning [30]. The pTn7-SCOUT plasmid family has an Esp3I site within the mini-Tn7 to clone any selection marker such as antibiotic resistance genes. We successfully cloned GmR, TcR and KmR resistance markers using the BEVA modules [30]. However, as shown with Sp versions, any other selection marker can be cloned; by simply PCR-amplifying them with compatible overhangs, followed by cloning into pTn7-SCOUT digested with Esp3I. The level 2 Golden Gate and the antibiotic cassette cloning sites increase the modularity of the already available mini-Tn7 delivery plasmids [28, 64]. We expanded the pTn7-SCOUT family with new antibiotic versions of Flippase-containing plasmids to enable excision of the antibiotic resistance cassette, which are compatible with the strains used in the study, since only ampicillin (ApR) and TcR version were available [28, 36].
Characterization of the attB site has enabled us to predict the success of mini-Tn7 integration if the host genome sequence is known. In some strains, mini-Tn7 integration would disrupt a gene; however, we have overcome this issue by integrating a new landing pad [41], providing a new attB site where mini-Tn7 is able to integrate (with an efficiency over 90% in the strains tested). This tool removes a bottleneck in mini-Tn7 use.
The DMF tool combines single chromosomal integration with multi-fluorescence labelling to discriminate up to six different strains in a bacterial community when growing in nutrient-rich media or colonising plant roots (Fig. 4). Our flow cytometry protocol is able to discriminate with more than 95% efficiency each DFM-labelled strain (Fig. 3, Fig. S3, Table 3, Table 4, Table 7), which is as efficient as the tool developed by Whitaker et al. [27] where they combined GFP and RFP with different RBS strengths to differentiate six Bacteroides strains with a 6% error. The main source of misassignment detected was with the Blue Colour population (Table 3, Fig. 3B). This can be partially related to autofluorescence of aromatic amino acids, thiamine and riboflavin, detected in the 405–456/61 channel [65, 66]. However, this blue autofluorescence represents less 2% of the events in Rlv3841U strain (Table 3, Fig. 3B). In addition, plant roots can show blue autofluorescence, mainly related to lignin and suberin compounds of the cell wall [67], as shown in the non-inoculated pea roots (Table S6). To overcome this issue, we quantified the background on non-inoculated pea roots for each combined population and subtracted this from the colonisation values.
High expression of fluorescent proteins can affect growth, decrease fitness, and generate toxicity due to protein aggregation and solubilisation [68, 69]. The fluorescent proteins chosen for DFM (mCherry, sYFP2 and mTagBFP) are engineered monomers with increased brightness, protein folding, extinction coefficient and maturation, which reduce deleterious effects compared to their predecessors [70,71,72]. Moreover, DFM is assembled in low-copy number plasmids and then integrated as a single copy into the bacterial chromosome, which reduces overall expression levels of the fluorescent proteins, and thereby any related toxicity. Furthermore, our results showed no deleterious effect of any DFM combinations during growth in liquid culture or colonisation of plants (Table 5, Table 6, Table S7, Table S8).
We successfully applied DFM to the OxCom6, a model SynCom of Proteobacteria root colonisers. Assembly of OxCom6 showed differences between nutrient-rich media, pea and barley roots (Fig. 4), indicating that the findings in planta can be associated with rhizosphere adaptation, as has been proven for plant microbiome [4, 73, 74].
The most marked difference was the one observed between OxCom6 assembly on pea and barley roots, where each of them have a distinct dominant strain, PfSBW25B and EcAA4RY, respectively, and their colonisation was determined in the early stages of root occupancy (1–3 dpi) (Fig. 4 B and C). P. fluorescens SWB25, a well-known root coloniser isolated from sugar beet [54], is recognised to enhance plant growth through a combination of factors such as competing with other microorganisms, producing antimicrobial compounds and stimulating systemic resistance [75]. P. fluorescens SWB25 has the capability to generate furanomycin, which displays a potent inhibitory effect on the growth of Pseudomonas, Bacillus, Erwinia and Dickeya strains as observed in agar diffusion assay [76]. On the other hand, E. cloacae AA4 is part of a 7-member SynCom isolated from maize roots, and the absence of E. cloacae AA4 results in the collapse of the root colonisation by the SynCom. Whilst E. cloacae AA4 exhibits antifungal and nematocidal properties, it has not been shown to have any antibacterial activity [21, 77]. The intrinsic antibiotic capabilities of both OxCom6 Gammaproteobacteria alone do not explain the distinctive OxCom6 assembly phenotype. This suggests that there may be a rhizosphere adaptation to pea in the case of PfSBW25B and to barley in the case of EcAA4RY, likely influenced by root exudates. The pea and barley root exudate profile have not been extensively characterised to date, but there are some studies that have provided partial descriptions of these exudates’ components. In the case of barley, a study by Calvo et al. [78] reported the presence of sugars such as sucrose, fructose and glucose at concentrations between 1 and 1.5 mg g root dry weight−1 at 71 days. On the other hand, the use of metabolite reporters on pea roots showed that at 4 dpi, the greater proportion of metabolites detected was sugars (xylose, fructose and myo-inositol), di-carboxylic acids (malonate and tartrate) and hesperetin; whereas, other sugars like sucrose were barely detected at this time point [79]. This suggests the different nature of pea and barley rhizosphere secretions, and therefore a different metabolic profile which the OxCom6 members can catabolise during the early stages of establishment, may be crucial in colonisation. In pea roots Rlv3841RB can achieve similar levels of colonisation as EcAA4RY, with both reaching counts of 4.1·106 egr at 14 dpi (Fig. 4B). Rlv3841 is a root symbiont of pea plants known for its unique affinity for colonising pea roots and inducing formation of nitrogen-fixing nodules [52]. Therefore, colonisation of Rlv3841RB may be associated with specific niches, such as infection threads and nodules, as evident from the presence of prominent nodules formed by Rlv3841RB at 13 and 14 dpi, as shown in Fig. S4. Rlv3841RB root colonisation numbers on pea in OxCom6 are lower compared to those in single culture at 7dpi, 1.7·106 ± 1.4·106 and 4.7·106 ± 1.5·106 egr respectively (t test p value = 0.006) (Fig. 4B and Table 6). This suggests the potential use of OxCom6 as a controlled environment to investigate competitive colonisation of legume endosymbionts, which is critical for the competitiveness of inoculants in the field [80]. On the other hand, Rlv3841RB was not detected in the barley rhizosphere (Fig. 4C), which reveals adaptation of this pea endosymbiont to its host rhizosphere [52]. Although A. olearius DQS-4 is capable of fixing nitrogen under free-living conditions and on barley roots, as well as promoting plant growth in rice and Setaria viridis [41, 81], it was not able to effectively colonise pea and barley roots in the presence of other members of OxCom6. Whilst it can colonise the root intercellular spaces of rice and S. viridis, it is not a strong competitor for pea and barley root colonisation, perhaps because it was isolated from oil-contaminated soil [53]. O. pituitosum AA2, like E. cloacae AA4, is one of the seven members of the maize SynCom and a significant contributor to that community at 14 dpi [21]. OpAA2R has a strong positive correlation with the colonisation/root infection of Rlv3841RB on pea roots. This could be partially facilitated by Nod factor produced by rhizobia, as legume mutants with impaired Nod factor perception have been shown to have a less abundant and altered microbiome [82, 83]. However, OpAA2R showed similar root colonisation counts between pea and barley since a positive correlation was observed between both plants (Pearson r = 0.62, R2 = 0.39, p value = 0.03), which suggests a good adaptation to both plant rhizospheres, and only this strain out of the six showed any significant correlation between both plants. Therefore, the correlation with Rlv3841RB on pea cannot be attributed to Rlv3841 host specificity. A. xylosoxidans AT1 was isolated from the rhizosphere of Medicago truncatula and it promotes growth of A. thaliana, M. truncatula and Brachypodium distachyon [11]. The fluctuating colonisation of AxAT1YB on pea roots, as shown in Fig. 4B, may be influenced by stochastic availability of specific resources for bacteria in the pea rhizosphere, which can result in oscillation in bacterial growth [84, 85]. However, this is not the case on barley roots, where AxAT1YB colonises in a steadier way, suggesting a better adaptation to this rhizosphere. A. xylosoxidans AT1 was isolated from M. truncatula by Tkacz et al. [11]; however, OTUs of Achromobacter spp. were among the most abundant in the three rhizospheres studied: M. truncatula, A. thaliana and B. dystachium. This suggests that the isolation from M. truncatula may be somewhat stochastic and does not necessarily imply that A. xylosoxidans AT1 is better adapted to this plant.
These results suggest that the distinct nature of the rhizosphere resources in pea and barley can result in different metabolic profiles encountered by OxCom6 members during colonisation [78, 79]. The availability of these resources in both plants would be just one aspect of the equation. Similarly, the catabolic capabilities of OxCom6 members in these rhizospheres could play a significant role in determining the assembly profile in each plant root based on their preference for catabolic sources [17, 86, 87]. However, catabolic capability alone may not be the sole determinant of this phenotype; competitive exclusion also could play a crucial role [88]. The speed at which bacteria utilise these resources could define their adaptation, and consequently, their abundance. Factors like chemotaxis and motility are pivotal in these processes [89, 90], since once a bacterium can detect a resource and effectively access and utilise it, it would gain an advantage over others, and this would lead to more rapid increase in numbers.
Conclusion
The combination of DFM with flow cytometry allowed us to perform absolute quantification of bacterial root colonisation quickly and easily. This is crucial when assessing root colonisation dynamics, as shown in Fig. 4, since relying solely on relative abundance can lead to inaccurate comparisons between samples (Fig. S5) [14]. Whilst DFM was used here for absolute quantification of bacterial root colonisation, it can also be applied to other bacterial communities in any environment. Whilst in this study we limited the SynCom to six members to correspond to the available marker combinations, marked strains can of course be combined into larger communities. Furthermore, by varying the marked strains, large assemblies can be investigated. Techniques using DFM illustrated here provide the means for rapid assessment of microbial communities in diverse plant, animal, and environmental settings.
Availability of data and materials
All relevant data are within the manuscript and its supporting information files. All pTn7-SCOUT plasmids are available in Addgene (See Table S3).
Change history
17 May 2024
A Correction to this paper has been published: https://doi.org/10.1186/s40168-024-01835-8
Abbreviations
- AcLP:
-
Azorhizobium caulinodans ORS571 containing the landing pad
- AoDQS-4Y :
-
Azoarcus olearius DQS-4 labelled with sYFP2
- Ap:
-
Ampicillin
- ApR :
-
Ampicillin resistance marker
- AxAT1YB :
-
Achromobacter xylosoxidans AT1 labelled with sYFP2 and mTagBFP
- B:
-
Combined population with exclusively Blue colour population
- DFM:
-
Differential fluorescent marking
- dpi:
-
Days post inoculation
- EcAA4RY :
-
Enterobacter cloacae AA4 labelled with mCherry and sYFP2
- egr:
-
Events·g root−1
- emL:
-
Events·mL−1
- FI:
-
Fluorescence intensity
- FISH:
-
Fluorescently in situ hybridisation
- FRT:
-
Flippase recognition site
- Gm:
-
Gentamicin
- GmR :
-
Gentamicin resistance marker
- Km:
-
Kanamycin
- KmR :
-
Kanamycin resistance marker
- min:
-
Minute
- MGT:
-
Mean generation time
- MCS:
-
Multicloning site
- OpAA2R :
-
Ochrobactrum pituitosum AA2 labelled with mCherry
- PfSBW25B :
-
Pseudomonas fluorescens SBW25 labelled with mTagBFP
- pTn7-SCOUT:
-
Plasmid Tn7 Suicidal low COpy for Universal Transfer
- R:
-
Combined population with exclusively Red colour population
- RB:
-
Combined population with exclusively Red and Blue colour population
- RBS:
-
Ribosome biding site
- RGI:
-
Root growth inhibition
- Rlv3841:
-
Rhizobium leguminosarum Bv. viciae 3841
- Rlv3841B :
-
Rlv3841 labelled with mTagBFP
- Rlv3841R :
-
Rlv3841 labelled with mCherry
- Rlv3841RB :
-
Rlv3841 labelled with mCherry and mTagBFP
- Rlv3841RY :
-
Rlv3841 labelled with mCherry and sYFP2
- Rlv3841U :
-
Rlv3841 not labelled
- Rlv3841Y :
-
Rlv3841 labelled with sYFP2
- Rlv3841YB :
-
Rlv3841 labelled with sYFP2 and mTagBFP
- RS:
-
Restriction site
- RY:
-
Combined population with exclusively Red and Yellow colour population
- SEM:
-
Standard error of the mean
- SmLP:
-
Sinorhizobium meliloti CL150 containing the landing pad
- Sp:
-
Spectinomycin
- SpR :
-
Spectinomycin resistance marker
- SynCom:
-
Synthetic community
- Y:
-
Combined population with exclusively Yellow colour population
- YB:
-
Combined population with exclusively Yellow and Blue colour population
- Tc:
-
Tetracycline
- TcR :
-
Tetracycline resistance marker
- TY:
-
Tryptone yeast
References
Uroz S, Buée M, Murat C, Frey-Klett P, Martin F. Pyrosequencing reveals a contrasted bacterial diversity between oak rhizosphere and surrounding soil. Environ Microbiol Rep. 2010;2(2):281–8. https://doi.org/10.1111/j.1758-2229.2009.00117.x.
Lundberg DS, Lebeis SL, Paredes SH, Yourstone S, Gehring J, Malfatti S, et al. Defining the core Arabidopsis thaliana root microbiome. Nature. 2012;488(7409):86–90. https://doi.org/10.1038/nature11237.
Bulgarelli D, Rott M, Schlaeppi K, Ver Loren van Themaat E, Ahmadinejad N, Assenza F, et al. Revealing structure and assembly cues for Arabidopsis root-inhabiting bacterial microbiota. Nature. 2012;488(7409):91–5.
Tkacz A, Bestion E, Bo Z, Hortala M, Poole PS. Influence of plant fraction, soil, and plant species on microbiota: a multikingdom comparison. Bio. 2020;11(1):e02785-19. https://doi.org/10.1128/mbio.02785-19.
Estabrook EM, Yoder JI. Plant-plant communications: rhizosphere signaling between parasitic angiosperms and their hosts. Plant Physiol. 1998;116(1):1–7. https://doi.org/10.1104/pp.116.1.1.
Sasse J, Martinoia E, Northen T. Feed your friends: do plant exudates shape the root microbiome? Trends in Plant Sci. 2018;23(1):25–41. https://doi.org/10.1016/j.tplants.2017.09.003.
Badri DV, Vivanco JM. Regulation and function of root exudates. Plant Cell Environ. 2009;32(6):666–81. https://doi.org/10.1111/j.1365-3040.2008.01926.x.
Turner TR, James EK, Poole PS. The plant microbiome. Genome Biol. 2013;14(6):209. https://doi.org/10.1186/gb-2013-14-6-209.
Berendsen RL, Pieterse CM, Bakker PA. The rhizosphere microbiome and plant health. Trends Plant Sci. 2012;17(8):478–86. https://doi.org/10.1016/j.tplants.2012.04.001.
Tkacz A, Poole P. Role of root microbiota in plant productivity. J Exp Bot. 2015;66(8):2167–75. https://doi.org/10.1093/jxb/erv157.
Tkacz A, Cheema J, Chandra G, Grant A, Poole PS. Stability and succession of the rhizosphere microbiota depends upon plant type and soil composition. ISME J. 2015;9:2349–59. https://doi.org/10.1038/ismej.2015.41.
de Souza RSC, Okura VK, Armanhi JSL, Jorrín B, Lozano N, da Silva MJ, et al. Unlocking the bacterial and fungal communities assemblages of sugarcane microbiome. Sci Rep. 2016;6:28774. https://doi.org/10.1038/srep28774.
Armstrong A, Valverde A, Ramond J-B, Makhalanyane TP, Jansson JK, Hopkins DW, et al. Temporal dynamics of hot desert microbial communities reveal structural and functional responses to water input. Sci Rep. 2016:34434. https://doi.org/10.1038/srep34434.
Tkacz A, Hortala M, Poole PS. Absolute quantitation of microbiota abundance in environmental samples. Microbiome. 2018;6(1):1–13. https://doi.org/10.1186/s40168-018-0491-7.
Vorholt JA, Vogel C, Carlström CI, Müller DB. Establishing causality: opportunities of synthetic communities for plant microbiome research. Cell Host Microbe. 2017;22(2):142–55. https://doi.org/10.1016/j.chom.2017.07.004.
Bai Y, Müller DB, Srinivas G, Garrido-Oter R, Potthoff E, Rott M, et al. Functional overlap of the Arabidopsis leaf and root microbiota. Nature. 2015;528(7582):364–9. https://doi.org/10.1038/nature16192.
Voges M, Bai Y, Schulze-Lefert P, Sattely ES. Plant-derived coumarins shape the composition of an Arabidopsis synthetic root microbiome. Proc Natl Acad Sci U S A. 2019;116(25):12558–65. https://doi.org/10.1073/pnas.1820691116.
Bodenhausen N, Bortfeld-Miller M, Ackermann M, Vorholt JA. A synthetic community approach reveals plant genotypes affecting the phyllosphere microbiota. Plos Genet. 2014;10(4):e1004283-e. https://doi.org/10.1371/journal.pgen.1004283.
Finkel OM, Salas-González I, Castrillo G, Conway JM, Law TF, Teixeira PJPL, et al. A single bacterial genus maintains root growth in a complex microbiome. Nature. 2020;587(7832):103–8. https://doi.org/10.1038/s41586-020-2778-7.
Armanhi JSL, de Souza RSC, Damasceno NdB, de Araújo LM, Imperial J, Arruda P. A community-based culture collection for targeting novel plant growth-promoting bacteria from the sugarcane microbiome. Front Plant Sci. 2018;8:1–17. https://doi.org/10.3389/fpls.2017.02191.
Niu B, Paulson JN, Zheng X, Kolter R. Simplified and representative bacterial community of maize roots. Proc Natl Acad Sci U S A. 2017;114(12):E2450–9. https://doi.org/10.1073/pnas.1616148114.
Eickhorst T, Tippkötter R. Improved detection of soil microorganisms using fluorescence in situ hybridization (FISH) and catalyzed reporter deposition (CARD-FISH). Soil Biol Biochem. 2008;40(7):1883–91. https://doi.org/10.1016/j.soilbio.2008.03.024.
Peredo EL, Simmons SL. Leaf-FISH: microscale imaging of bacterial taxa on phyllosphere. Front Microbiol. 2018;8. https://doi.org/10.3389/fmicb.2017.02669.
Lukumbuzya M, Schmid M, Pjevac P, Daims H. A multicolor fluorescence in situ hybridization approach using an extended set of fluorophores to visualize microorganisms. Front Microbiol. 2019;10:1383. https://doi.org/10.3389/fmicb.2019.01383.
Kubota K. CARD-FISH for environmental miicroorganisms: technical advancement and future applications. Microbes Environ. 2013;28(1):3–12. https://doi.org/10.1264/jsme2.ME12107.
Piwosz K, Mukherjee I, Salcher MM, Grujčić V, Šimek K. CARD-FISH in the sequencing era: opening a new universe of protistan ecology. Front Microbiol. 2021;12. https://doi.org/10.3389/fmicb.2021.640066.
Whitaker WR, Shepherd ES, Sonnenburg JL. Tunable expression tools enable single-cell strain distinction in the gut microbiome. Cell. 2017;169(3):538-46.e12. https://doi.org/10.1016/j.cell.2017.03.041.
Choi K-H, Gaynor JB, White KG, Lopez C, Bosio CM, Karkhoff-Schweizer RR, et al. A Tn7-based broad-range bacterial cloning and expression system. Nat Meth. 2005;2(6):443–8. https://doi.org/10.1038/nmeth765.
Peters JE, Craig NL. Tn7: smarter than we thought. Nat Rev Mol Cell Biol. 2001;2(11):806–14. https://doi.org/10.1038/35099006.
Geddes BA, Mendoza-Suárez MA, Poole PS. A bacterial expression vector archive (BEVA) for flexible modular assembly of Golden Gate-compatible vectors. Front Microbiol. 2019;9(3345) . https://doi.org/10.3389/fmicb.2018.03345.
Bertani G, Weigle JJ. Host controlled variation in bacterial viruses. J Bacteriol. 1953;65(2):113–21. https://doi.org/10.1128/jb.65.2.113-121.1953.
Beringer JE. R factor transfer in Rhizobium leguminosarum. Microbiology. 1974;84(1):188–98. https://doi.org/10.1099/00221287-84-1-188.
Wheatley RM, Ramachandran VK, Geddes BA, Perry BJ, Yost CK, Poole PS. Role of O2 in the growth of Rhizobium leguminosarum bv viciae 3841 on glucose and succinate. J Bacteriol. 2017;199(1):00572–16. https://doi.org/10.1128/JB.00572-16.
Ditta G, Stanfield S, Corbin D, Helinski DR. Broad host range DNA cloning system for gram-negative bacteria: construction of a gene bank of Rhizobium meliloti. Proc Natl Acad Sci U S A. 1980;77(12):7347–51. https://doi.org/10.1073/pnas.77.12.7347.
Lehman SS, Mladinich KM, Boonyakanog A, Mima T, Karkhoff-Schweizer RR, Schweizer HP. Versatile nourseothricin and streptomycin/spectinomycin resistance gene cassettes and their use in chromosome integration vectors. J Microbiol Methods. 2016;129:8–13. https://doi.org/10.1016/j.mimet.2016.07.018.
Hoang TT, Karkhoff-Schweizer RR, Kutchma AJ, Schweizer HP. A broad-host-range Flp-FRT recombination system for site-specific excision of chromosomally-located DNA sequences: application for isolation of unmarked Pseudomonas aeruginosa mutants. Gene. 1998;212(1):77–86. https://doi.org/10.1016/S0378-1119(98)00130-9.
Rivas R, Velázquez E, Valverde A, Mateos PF, Martínez-Molina E. A two primers random amplified polymorphic DNA procedure to obtain polymerase chain reaction fingerprints of bacterial species. Electrophoresis. 2001;22(6):1086–9. https://doi.org/10.1002/1522-2683()22:6%3c1086::Aid-elps1086%3e3.0.Co;2-6.
Edgar RC. MUSCLE: multiple sequence alignment with high accuracy and high throughput. Nucleic Acids Res. 2004;32(5):1792–7. https://doi.org/10.1093/nar/gkh340.
Kumar S, Stecher G, Li M, Knyaz C, Tamura K. MEGA X: molecular evolutionary genetics analysis across computing platforms. Mol Biol Evol. 2018;35(6):1547–9. https://doi.org/10.1093/molbev/msy096.
Waterhouse AM, Procter JB, Martin DMA, Clamp M, Barton GJ. Jalview Version 2—a multiple sequence alignment editor and analysis workbench. Bioinformatics. 2009;25(9):1189–91. https://doi.org/10.1093/bioinformatics/btp033.
Haskett TL, Knights HE, Jorrin B, Mendes MD, Poole PS. A simple in situ assay to assess plant-associative bacterial nitrogenase activity. Front Microbiol. 2021;12. https://doi.org/10.3389/fmicb.2021.690439.
diCenzo G, Milunovic B, Cheng J, Finan TM. The tRNAarg gene and engA are essential genes on the 1.7-Mb pSymB megaplasmid of Sinorhizobium meliloti and were translocated together from the chromosome in an ancestral strain. J Bacteriol. 2013;195(2):202–12. https://doi.org/10.1128/jb.01758-12.
Quandt J, Hynes MF. Versatile suicide vectors which allow direct selection for gene replacement in gram-negative bacteria. Gene. 1993;127(1):15–21. https://doi.org/10.1016/0378-1119(93)90611-6.
Sánchez-Cañizares C, Prell J, Pini F, Rutten P, Kraxner K, Wynands B, et al. Global control of bacterial nitrogen and carbon metabolism by a PTSNtr-regulated switch. Proc Natl Acad Sci U S A. 2020;117(19):10234–45. https://doi.org/10.1073/pnas.1917471117.
Poole PS, Blyth A, Reid CJ, Walters K. myo-Inositol catabolism and catabolite regulation in Rhizobium leguminosarum bv. viciae. Microbiology. 1994;140(10):2787–95. https://doi.org/10.1099/00221287-140-10-2787.
Corich V, Giacomini A, Vian P, Vendramin E, Carlot M, Basaglia M, et al. Aspects of marker/reporter stability and selectivity in soil microbiology. Microb Ecol. 2001;41(4):333–40. https://doi.org/10.1007/s002480000092.
Penfold RJ, Pemberton JM. An improved suicide vector for construction of chromosomal insertion mutations in bacteria. Gene. 1992;118(1):145–6. https://doi.org/10.1016/0378-1119(92)90263-O.
Gringauz E, Orle KA, Waddell CS, Craig NL. Recognition of Escherichia coli attTn7 by transposon Tn7: lack of specific sequence requirements at the point of Tn7 insertion. J Bacteriology. 1988;170(6):2832–40. https://doi.org/10.1128/jb.170.6.2832-2840.1988.
Wang K, Kang L, Anand A, Lazarovits G, Mysore KS. Monitoring in planta bacterial infection at both cellular and whole-plant levels using the green fluorescent protein variant GFPuv. New Phytol. 2007;174(1):212–23. https://doi.org/10.1111/j.1469-8137.2007.01999.x.
Velásquez AC, Huguet-Tapia JC, He SY. Shared in planta population and transcriptomic features of nonpathogenic members of endophytic phyllosphere microbiota. Proc Natl Acad Sci. 2022;119(14): e2114460119. https://doi.org/10.1073/pnas.2114460119.
Valdameri G, Kokot TB, Pedrosa FdO, Souza EM. Rapid quantification of rice root-associated bacteria by flow cytometry. Lett Appl Microbiol. 2014;60(3):237–41. https://doi.org/10.1111/lam.12351.
Johnston AWB, Beringer JE. Identification of the Rhizobium strains in pea root nodules using genetic markers. Microbiol. 1975;87(2):343–50. https://doi.org/10.1099/00221287-87-2-343.
Chen M-H, Sheu S-Y, James EK, Young C-C, Chen W-M. Azoarcus olearius sp. nov., a nitrogen-fixing bacterium isolated from oil-contaminated soil. Int J Syst Evol Microbiol. 2013;63(Pt 10):3755–61. https://doi.org/10.1099/ijs.0.050609-0.
Thompson IP, Lilley AK, Ellis RJ, Bramwell PA, Bailey MJ. Survival, colonization and dispersal of genetically modified Pseudomonas fluorescens SBW25 in the phytosphere of field grown sugar beet. Bio/Technology. 1995;13(12):1493–7. https://doi.org/10.1038/nbt1295-1493.
Wiles TJ, Schlomann BH, Wall ES, Betancourt R, Parthasarathy R, Guillemin K. Swimming motility of a gut bacterial symbiont promotes resistance to intestinal expulsion and enhances inflammation. PLOS Biol. 2020;18(3): e3000661. https://doi.org/10.1371/journal.pbio.3000661.
Geddes BA, Paramasivan P, Joffrin A, Thompson AL, Christensen K, Jorrin B, et al. Engineering transkingdom signalling in plants to control gene expression in rhizosphere bacteria. Nat Commun. 2019;10(1):3430. https://doi.org/10.1038/s41467-019-10882-x.
Schlechter RO, Jun H, Bernach M, Oso S, Boyd E, Muñoz-Lintz DA, et al. Chromatic Bacteria—a broad host-range plasmid and chromosomal insertion toolbox for fluorescent protein expression in bacteria. Front Microbiol. 2018;9:3052. https://doi.org/10.3389/fmicb.2018.03052.
Peters JM, Koo B-M, Patino R, Heussler GE, Hearne CC, Qu J, et al. Enabling genetic analysis of diverse bacteria with Mobile-CRISPRi. Nat Microbiol. 2019;4(2):244–50. https://doi.org/10.1038/s41564-018-0327-z.
Rouches MV, Xu Y, Cortes LBG, Lambert G. A plasmid system with tunable copy number. Nat Commun. 2022;13(1):3908. https://doi.org/10.1038/s41467-022-31422-0.
Carroll AC, Wong A. Plasmid persistence: costs, benefits, and the plasmid paradox. Can J Microbiol. 2018;64(5):293–304. https://doi.org/10.1139/cjm-2017-0609.
Diaz R, Rech J, Bouet J-Y. Imaging centromere-based incompatibilities: insights into the mechanism of incompatibility mediated by low-copy number plasmids. Plasmid. 2015;80:54–62. https://doi.org/10.1016/j.plasmid.2015.03.007.
Kontomichalou P, Mitani M, Clowes RC. Circular R-factor molecules controlling penicillinase synthesis, replicating in Escherichia coli under either relaxed or stringent control. J Bacteriol. 1970;104(1):34–44. https://doi.org/10.1128/jb.104.1.34-44.1970.
Weber E, Engler C, Gruetzner R, Werner S, Marillonnet S. A modular cloning system for standardized assembly of multigene constructs. PLoS ONE. 2011;6(2): e16765. https://doi.org/10.1371/journal.pone.0016765.
Hinz AJ, Stenzler B, Poulain AJ. Golden gate assembly of aerobic and anaerobic microbial bioreporters. Appl Environ Microbiol. 2022;88(1):e01485-e1521. https://doi.org/10.1128/AEM.01485-21.
Bhatta H, Goldys EM, Learmonth RP. Use of fluorescence spectroscopy to differentiate yeast and bacterial cells. Appl Microbiol Biotechnol. 2006;71(1):121–6. https://doi.org/10.1007/s00253-005-0309-y.
Yang H, Xiao X, Zhao XS, Hu L, Xue XF, Ye JS. Study on fluorescence spectra of thiamine and riboflavin. In: MATEC Web of Conferences. vol. 63: EDP Sciences; 2016. https://doi.org/10.1051/matecconf/20166303013.
Donaldson L. Autofluorescence in plants. Molecules. 2020;25(10):2393. https://doi.org/10.3390/molecules25102393.
Jakobs S, Subramaniam V, Schönle A, Jovin TM, Hell SW. EGFP and DsRed expressing cultures of Escherichia coli imaged by confocal, two-photon and fluorescence lifetime microscopy. FEBS Lett. 2000;479(3):131–5. https://doi.org/10.1016/S0014-5793(00)01896-2.
Barbier M, Damron FH. Rainbow vectors for broad-range bacterial fluorescence labeling. PLoS ONE. 2016;11(3): e0146827. https://doi.org/10.1371/journal.pone.0146827.
Shaner NC, Steinbach PA, Tsien RY. A guide to choosing fluorescent proteins. Nat Methods. 2005;2(12):905–9. https://doi.org/10.1038/nmeth819.
Kremers G-J, Goedhart J, van Munster EB, Gadella TWJ. Cyan and yellow super fluorescent proteins with improved brightness, protein folding, and FRET Förster Radius. Biochemistry. 2006;45(21):6570–80. https://doi.org/10.1021/bi0516273.
Subach OM, Gundorov IS, Yoshimura M, Subach FV, Zhang J, Grüenwald D, et al. Conversion of red fluorescent protein into a bright blue probe. Chem Biol. 2008;15(10):1116–24. https://doi.org/10.1016/j.chembiol.2008.08.006.
Burrill HM, Wang G, Bever JD. Rapid differentiation of soil and root microbiomes in response to plant composition and biodiversity in the field. ISME Commun. 2023;3(1):31. https://doi.org/10.1038/s43705-023-00237-5.
Fitzpatrick CR, Copeland J, Wang PW, Guttman DS, Kotanen PM, Johnson MTJ. Assembly and ecological function of the root microbiome across angiosperm plant species. Proc Natl Acad Sci U S A. 2018;115(6):E1157–65. https://doi.org/10.1073/pnas.1717617115.
Jackson RW, Preston GM, Rainey PB. Genetic characterization of Pseudomonas fluorescens SBW25 rsp gene expression in the phytosphere and in vitro. J Bacteriol. 2005;187(24):8477–88. https://doi.org/10.1128/JB.187.24.8477-8488.2005.
Trippe K, McPhail K, Armstrong D, Azevedo M, Banowetz G. Pseudomonas fluorescens SBW25 produces furanomycin, a non-proteinogenic amino acid with selective antimicrobial properties. BMC Microbiol. 2013;13(1):111. https://doi.org/10.1186/1471-2180-13-111.
Zhao Y, Yuan Z, Wang S, Wang H, Chao Y, Sederoff RR, et al. Gene sdaB Is Involved in the nematocidal activity of Enterobacter ludwigii AA4 Against the pine wood nematode Bursaphelenchus xylophilus. Front Microbiol. 2022;13. https://doi.org/10.3389/fmicb.2022.870519.
Calvo OC, Franzaring J, Schmid I, Fangmeier A. Root exudation of carbohydrates and cations from barley in response to drought and elevated CO2. Plant Soil. 2019;438(1):127–42. https://doi.org/10.1007/s11104-019-03998-y.
Pini F, East AK, Appia-Ayme C, Tomek J, Karunakaran R, Mendoza-Suárez M, et al. Bacterial biosensors for in vivo spatiotemporal mapping of root secretion. 2017;174(3):1289–306. https://doi.org/10.1104/pp.16.01302.
Mendoza-Suárez MA, Geddes BA, Sánchez-Cañizares C, Ramírez-González RH, Kirchhelle C, Jorrin B, et al. Optimizing Rhizobium-legume symbioses by simultaneous measurement of rhizobial competitiveness and N2 fixation in nodules. Proc Natl Acad Sci U S A. 2020;117(18):9822–31. https://doi.org/10.1073/pnas.1921225117.
Faoro H, Rene Menegazzo R, Battistoni F, Gyaneshwar P, do Amaral FP, Taulé C, et al. The oil-contaminated soil diazotroph Azoarcus olearius DQS-4T is genetically and phenotypically similar to the model grass endophyte Azoarcus sp. BH72. Environ Microbiol Rep. 2017;9(3):223–38. https://doi.org/10.1111/1758-2229.12502.
Tkacz A, Ledermann R, Martyn A, Schornack S, Oldroyd GED, Poole PS. Nodulation and nitrogen fixation in Medicago truncatula strongly alters the abundance of its root microbiota and subtly affects its structure. Environ Microbiol. 2022;24(11):5524–33. https://doi.org/10.1111/1462-2920.16164.
Zgadzaj R, Garrido-Oter R, Jensen DB, Koprivova A, Schulze-Lefert P, Radutoiu S. Root nodule symbiosis in Lotus japonicus drives the establishment of distinctive rhizosphere, root, and nodule bacterial communities. Proc Natl Acad Sci U S A. 2016;113(49):E7996–8005. https://doi.org/10.1073/pnas.1616564113.
Nguyen J, Fernandez V, Pontrelli S, Sauer U, Ackermann M, Stocker R. A distinct growth physiology enhances bacterial growth under rapid nutrient fluctuations. Nat Commun. 2021;12(1):3662. https://doi.org/10.1038/s41467-021-23439-8.
Geisel N, Vilar JMG, Rubi JM. Optimal resting-growth strategies of microbial populations in fluctuating environments. PLoS ONE. 2011;6(4): e18622. https://doi.org/10.1371/journal.pone.0018622.
Chaparro JM, Badri DV, Bakker MG, Sugiyama A, Manter DK, Vivanco JM. Root exudation of phytochemicals in Arabidopsis follows specific patterns that are developmentally programmed and correlate with soil microbial functions. PLoS ONE. 2013;8(2): e55731. https://doi.org/10.1371/journal.pone.0055731.
Bressan M, Roncato MA, Bellvert F, Comte G, Haichar FZ, Achouak W, et al. Exogenous glucosinolate produced by Arabidopsis thaliana has an impact on microbes in the rhizosphere and plant roots. ISME J. 2009;3(11):1243–57. https://doi.org/10.1038/ismej.2009.68.
Schlechter RO, Kear EJ, Bernach M, Remus DM, Remus-Emsermann MNP. Metabolic resource overlap impacts competition among phyllosphere bacteria. ISME J. 2023;17(9):1445–54. https://doi.org/10.1038/s41396-023-01459-0.
Wheatley RM, Ford BL, Li L, Aroney STN, Knights HE, Ledermann R, et al. Lifestyle adaptations of Rhizobium from rhizosphere to symbiosis. Proc Natl Acad Sci U S A. 2020;117(38):23823–34. https://doi.org/10.1073/pnas.2009094117.
Knights HE, Jorrin B, Haskett TL, Poole PS. Deciphering bacterial mechanisms of root colonization. Environ Microbiol Rep. 2021;13(4):428–44. https://doi.org/10.1111/1758-2229.12934.
Acknowledgements
We would like to thank Dr Euan James from The James Hutton Institute, UK for sharing Azoarcus olearius DQS-4. We would like to thank Prof. Roberto Kolter from Harvard University, USA for sharing Ochrobactrum pituitosum AA2, Enterobacter cloacae AA4, Pseudomonas putida AA7 and Herbaspirillum frisingense AA6. We would like to thank to Prof. Jose Manuel Palacios from Universidad Politécnica de Madrid, Spain, for sharing Rhizobium leguminosarum bv. viciae UPM791. We would like to thank Dr Silke Ruppel from Leibniz-Institute for Agricultural Landscape Research, Germany for sharing Kosakonia radicincitans DSM16656T. We would like to thank Prof. Hebert P. Schweizer from Northern Arizona University, USA for sharing the pUC18T-mini-Tn7 plasmids and to the Enabling Nutrient in Symbioses in Agriculture (ENSA) project for sharing the Golden Gate destination vectors. We would like to thank Dr Alison East for her in deep critical revision of this manuscript. We would like to thank all past and present lab members of Prof. Philip Poole for their valuable discussion about this project during meetings and coffee breaks. We would like to thank to ChatGPT for its help in the definition of pTn7-SCOUT acronym.
Funding
This work was supported by the Biological Science Research Council [grant numbers BB/N013387/1, BB/T001801/1, BB/T006722/1, BB/W006219/1] granted to PSP. TLH is the recipient of an 1851 Royal Commission for the Exhibition of 1851 Research Fellowship (RF-2019–100238) and Wolfson College, University of Oxford Junior Research Fellowship. JD is the recipient of a Radford Scholarship, Department of Plant Sciences in conjunction with Worcester college, TJU is the recipient of the BBSRC grant BB/T008784/1.
Author information
Authors and Affiliations
Contributions
All authors listed have made a substantial direct and intellectual contribution to the work and approved it for publication. BJ and PSP conceived the study and designed the work. BJ, TLH, HEK, AM, TJU, JD and RL performed the experiments. BJ analysed the data and prepared the manuscript. BJ, PSP, TLH, HEK, RL, JD, AM and TJU critically reviewed the manuscript
Corresponding author
Ethics declarations
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The original article has been updated: The author name Jessic Dolliver should be Jessica Dolliver.
Supplementary Information
Additional file 1: Fig S1.
Flow cytometry gating strategy. Employing the CellStream® Analysis 1.3.384 software, the gating strategy was implemented to delineate the Colour and Combined populations. The initial step involved defining the Bacteria population by selecting the concentrated events area when plotting size (FSC – 456/51) against granularity (SSC – 773/56). Subsequently, the Bacteria population was gated based on FSC (threshold > 0) and the aspect-ratio of SSC (threshold > 0.4) establishing the Singlets population. Then Singlets population was further refined based on their fluorescence emission to depict the different Colour populations: Red, Yellow and Blue, corresponding to the fluorescent emission of mCherry, sYFP2 and mTagBFP, respectively. For mCherry, fluorescent emission was detected at 611/31, with a threshold above 550 FI units to define Red population. For sYFP2, emission was detected at 528/46, and the events above 500 FI units were designated as Yellow population. Emission for TagBFP was acquired at 457/51, and events exhibiting fluorescence above 450 FI units were categorised as the Blue population. Combining in one or two of the different Colour populations led to the definition of six distinct Combined populations: R (Red), Y (Yellow), B (Blue), RY (Red and Yellow), RB (Red and Blue) and YB (Yellow and Blue).
Additional file 2: Fig S2.
Fluorescent proteins spectra. The excitation (EX) (dot) and emission (EM) (dash) spectra are shown for three fluorescent proteins: mTagBFP (blue), sYFP2 (yellow) and mCherry (red) (data sourced from fpbase.org). Vertical lines indicate the laser wavelength (nm), whilst the light bars represent the filters used in the Amnis® Cellstream® flow cytometer to detect mTagBFP (blue, 405 nm – 457/51), sYFP2 (yellow, 488 – 528/46) and mCherry (red, 561 – 528/46).
Additional file 3: Fig S3.
Confocal microscopy images of Rhizobium leguminosarum 3841 unlabelled and labelled with different DFM combinations. A) bright channel. B) bright, red, yellow and blue channel. C) red, yellow and blue channel. D) red channel. E) yellow channel. F) blue channel. WT: R. leguminosarum 3841 (Rlv3841) not labelled. R: Rlv3841 labelled with mCherry. Y: Rlv3841 labelled with sYFP2. B: Rlv3841 labelled with mTag. RY: Rlv3841 labelled with mCherry and sYFP2. RB: Rlv3841 labelled with mCherry and mTag. YB: Rlv3841 labelled with sYFP2 and mTag.
Additional file 4: Fig S4.
Stereomicroscope images of Rhizobium leguminosarum bv. viciae 3841RB within nodules on pea roots inoculated with OxCom6 at 13 and 14 dpi. In the first column, bright images are shown. In the second column the 560/40—630/74 channel was utilised to observe mCherry expression. The third column utilises the 405/20—460/40 channel to visualise TagBFP expression.
Additional file 5: Fig S5.
Absolute and relative values of community assembly of Enterobacter cloacae AA4. This figure represents the absolute (blue) and relative values (orange) of E. cloacae AA4 labelled with mCherry and sYFP2 (EcAA4RY) colonising pea roots (A), barley roots (B) and growing on rich media (C). egr (events•g root−1). emL (event•mL−1). Data shows that for EcAA4RY that the absolute and relative values showed a different tendency on pea roots and on rich media where in both of them looks like there is a decrease when checking relative values whereas absolute values shows that the strains maintain steady.
Additional file 6: Table S1.
Primers used in this study
Additional file 7: Table S2.
Plasmids use in this study
Additional file 8: Table S3.
pTn7-SCOUT plasmids developed in this study
Additional file 9: Table S4.
Strains used in this study
Additional file 10: Table S5.
Flow repository codes for flow cytometry data used in this study
Additional file 11: Table S6.
Events per gram of root of non-inoculated pea and barley roots for each Combined population.
Additional file 12: Table S7.
Mean Generation time of each OxCom6 strain unlabelled and labelled with its DFM pattern
Additional file 13: Table S8.
Colonisation of pea roots (egr) by each OxCom6 strains when inoculated alone (single colonisation) or in competition with unlabelled strain (competitive colonisation)
Additional file 14: Table S9.
Comparison between colony formation units and flow cytometry data for each OxCom6 strain.
Additional file 15: Supplementary Methods.
Description of the assembly of Golden Gate plasmids used in this study.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Jorrin, B., Haskett, T.L., Knights, H.E. et al. Stable, fluorescent markers for tracking synthetic communities and assembly dynamics. Microbiome 12, 81 (2024). https://doi.org/10.1186/s40168-024-01792-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40168-024-01792-2