Introduction

Metal ions play important roles in biological processes. The field of knowledge concerned with the application of inorganic chemistry to the therapy or diagnosis of a disease is medicinal inorganic chemistry. Introducing metal ions or metal ion binding components into a biological system for treating diseases is one of the main subdivisions in bioinorganic chemistry. Intentionally introducing metal ions into the human biological system has proven useful for diagnostic and therapeutic purposes [1].

One of the most severe and complicated threats to human life is cancer, caused by the rapid formation and proliferation of abnormal cells that can spread beyond their natural boundaries [2]. According to the WHO (World Health Organization), 18.1 million individuals worldwide were diagnosed with cancer in 2018, and 9.6 million died from it [3]. As a result, researchers have been searching for alternative treatments and more effective and selective drugs to treat cancer [4]. Anticancer drug development is one of the biological studies' most quickly evolving fields [5]. Increasing the range of metal-based drugs is critical for increasing activity and inducing apoptosis in various tumor cells [6,7,8]. Among these drugs, Platinum (Pt) anticancer drugs are commonly used in clinical therapy, particularly in testicular, ovarian, and neck and head cancers [9, 10]. Their ability to bind to DNA covalently and modify its structure gives platinum agents their anticancer effects, influencing cellular processes and ultimately leading to cancer cell death [11, 12]. Cisplatin [Cis diamminedichloroplatinum(II)] was the first platinum anticancer drug that entered clinical trials [13,14,15]. Cisplatin and its analogs' anticancer activity are mainly attributed to a specific intrastrand adduct formed by platinum crosslinking N7 atoms of nearby guanine residues in DNA. It was found that the cisplatin analogs' anticancer effects are modulated by the carrier amine ligands [16]. Transplatin, unlike cisplatin, cannot form intrastrand in double-helix DNA between consecutive base residues due to steric reasons.

Nevertheless, if two bases on the same strand are separated by at least one intervening base, transplatin can crosslink them [17]. The synthesis of platinum(II) complexes with numerous ligands has been the target of much research. However, other metal complexes soon followed; some metals were used as an effective chemotherapeutic, antibacterial, and antifungal drug [18]. In the design of metal-based chemotherapeutic agents, the choice of metal ion and the effect of the ligand is crucial [19]. A heteroatom like nitrogen, sulfur, or oxygen is commonly used to bind metals with ligands. A coordination complex is created when a coordination bond is formed between the metal and the ligand; metals and their complexes have played essential roles in medicine for over 5000 years [20, 21].

Metal complexes' unique structure, reactivity, and ease of synthesis have made them effective ligands in drug development research [22]. As a drug crosses the cell membrane and enters the cell, the structure and arrangement of the ligands may influence the drug's mode of action and metabolism [23]. Metal complexes' pharmacological activity is determined by the coordination of metal ions and ligands [24,25,26]. Rohand et al. [27] reported that the antimicrobial activity in vitro reveals that metal complexation increases the complexed ligand's antibacterial activity versus both bacterial strains compared to the free ligand (Complexes' higher activity could be attributed to their increased lipophilicity due to their chelation [28]. Although cisplatin and its derivatives have been widely utilized to treat certain malignancies, their therapeutic efficacy is limited by systemic toxicity and resistance [29,30,31,32]. For these limitations, scientists are searching for and synthesizing novel metal complexes with enhanced anticancer activity while reducing toxicity and resistant properties [33,34,35,36,37,38,39]. Metal complexes comprising a variety of imidazole-containing ligands were widely explored as model compounds of metal active sites. Among these complexes, copper(II) complexes containing heterocyclic amines have significant importance because they demonstrate a variety of biological activities, including anticancer activity [40] and antimicrobial activity [41]. Palladium(II) complexes of imidazoles have been shown to have potent antimicrobial and antitumor activities [42,43,44]. The binding of imidazole to transition metal ions is of great interest, particularly in biological systems [45, 46]. Imidazole derivatives consider the basic fragment of various natural products and biological systems. The imidazole ring acts as a co-ligand in metal complexes, possibly allowing them to bind to biomolecules [47]. Because of the significant biological activity of imidazole and its derivatives, particularly as antiprotozoal, antifungal, and antihypertensive agents, they have a unique place in medicinal chemistry [48, 49].

The complexes, [Imz-H][Fe(pda)2]0.1.3H2O (1) and [Mn(Imz)6]. 2Cl0.2H2O (2), where Imz = imidazole and H2pda = 2,6 pyridine dicarboxylic acid, were synthesized by Khan et al. [50]. The antimicrobial activity of complexes was studied in vitro using the disc diffusion method versus some bacteria such as Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, and Listeria monocytogenes and some fungi like Fusarium moniliform and Candida albicans. It was revealed that complexes had the highest antibacterial activity against E. coli, S. aureus, and K. pneumonia but showed low activity versus L. monocytogenes. Complexes showed more potent activity against Candida albicans than Fusarium moniliform for the antifungal activity. The cytotoxicity of complexes was studied in vitro by the MTT assay against a human macrophage/monocyte cell line. Results revealed that complex 1 at IC50 = 7.89 mM had higher cytotoxic activity than complex 2 at IC50 = 15.98 mM. Abdel-Rahman et al. [51] synthesized the following copper complexes Cu(Bzphe)2(Imi)2(OH2)2 (1) Cu(Bzphe)2(Mimi)2(OH2)2](2), Cu(Bzphe)2(Bipy)(OH2)2(3), and Cu(Bzphe)2(Phen)(OH2)2 (4) where Bzphe = N-benzoyl-dl-phenylalanine, Imi = imidazole, Mimi = methyl imidazole, Bipy = 2,2′-bipyridine and Phen = 1,10-phenanthroline. The biological activity, such as antimicrobial activity, was studied in vitro versus two Gram-positive bacteria (Bacillus subtilis and Micrococcus luteus), one Gram-negative bacteria (Escherichia coli), and three fungal cultures (Aspergillus niger, Candida glabrata, and Saccharomyces cerevisiae). Results showed that copper complexes significantly inhibit pathogens' growth in this study. Also, results showed that complex 3 had the highest activity and activity of complexes affected according to this order CuImiBzphe < CuMimiBzphe < CuPhenBzphe < CuBipyBzphe. In the end, it was found that the synthesized complexes showed good antimicrobial activity. Fnfoon and Al-Adilee [52] studied the complexation of Cu(II), Ag(I), and Au(III) ions with newly synthesized imidazole ligand, which was prepared by a coupling reaction between 2-]2′-(4-Chloro Phenyl)azo[-1-Methyl imidazole]. The anticancer activity of these complexes is assessed by MTT assay against brain cancer (A172) cell lines. Results showed that synthesized complexes demonstrated effective anticancer activity and provided great potential as anti-tumor medication options in the future. This study aims to synthesize antitumor drugs containing heterocyclic ligands such as novel AMI complexes through a chelation process to avoid converting trans form, which is clinically ineffective as cis and transplatin [53,54,55]. Also, the cytotoxic effect of these metal complexes on the breast (MCF-7) and cervical (HeLa) cancer cell lines was studied. Additionally, the study's aim extends to the study of the complexes-DNA interaction. Also, the prepared complexes' antimicrobial and antioxidant activities were studied in vitro as in our previously published work [56,57,58] (Additional file 1).

Materials and methods

Materials

Chemicals and reagents

All chemicals utilized were of the greatest analytical purity. They included 2-(amino methyl imidazole) = (AMI), oxalic acid, and malonic acid that Sigma-Aldrich supplied. The metal salts of CuCl2·2H2O (Sigma-Aldrich) and K2PdCl4(Merck) were used. Organic solvents such as ethyl alcohol (99%) and dimethylformamide (DMF), in addition to dimethyl sulfoxide (DMSO), were used. All preparations are usually made use of de-ionized water collected from glass equipment.

Solutions

Fresh stock solutions of 1 × 10−3 M binary and mixed ligand complexes were prepared by dissolving the chelates in a sufficient volume of ethanol with exact weight. After that, all the complex solutions' conductivity was measured. The recommended procedures standardized the metal salt solutions [59, 60]. The previous stock solutions were diluted to prepare different complexes' solutions that could be used to study UV–Vis spectra.

Cell lines

MCF7 cells: the human epithelial breast carcinoma cell lines, and HeLa cells: the human cervical cancer cell line, was imported from ATCC (The American Type Culture Collection; Manassas, VA, USA).

Methods

Synthesis of metal complexes

The complex binary was prepared by mixing a hot ethanolic solution of AMI ligand (1 mmol, 0.170 g) and 0.326 g K2PdCl4. A hot solution of ethanol (20 mL) (70 °C) of AMI (1 mmol, 0.170 g) as the primary ligand was mixed with a hot solution of ethanol of oxalic acid (1 mmol, 0.104 g) or malonic acid (1 mmol, 0.104 g) as a secondary ligand with metal chloride salt (1 mmol, 0.170 g CuCl2·2H2O) dissolved in absolute hot ethanol (20 mL) (70 °C) for preparation of the mixed ligand chelates (complex two and complex three, respectively). After two hours of reflux stirring of the resultant mixture, the complexes precipitated. Filtration was used to collect the sample, washed numerous times in diethyl ether for purification before being dried under a vacuum over anhydrous calcium chloride. Pure mixed ligand complexes were obtained by recrystallization from ethanol (Fig. 1).

Fig. 1
figure 1

The structures of [Pd(AMI)Cl2] and [Cu(AMI)L1], where AMI = amino methyl imidazole, L1 = oxalate

DFT calculation

Density Functional Theory (DFT) calculations by the program Gaussian 09 at the B3LYP/LANL2DZ level of theory were used to optimize the structure of the investigated complexes. Different configurations and compositions of coordination's spheres are used for complexes, and the configurations with the lowest total energy were chosen [61] (Figs. 2, 3, 4, 5).

Fig. 2
figure 2

HOMO of [Pd(AMI)Cl2], where AMI = amino methyl imidazole

Fig. 3
figure 3

LUMO of [Pd(AMI)Cl2] where AMI = amino methyl imidazole

Fig. 4
figure 4

HOMO of [Cu(AMI)L1], where AMI = amino methyl imidazole, L1 = oxalate

Fig. 5
figure 5

LUMO of [Cu(AMI)L1], where AMI = amino methyl imidazole, L1 = oxalate

Characterization of newly prepared AMI complexes

Newly prepared AMI complexes were subjected to elemental analyses, EI-mass, IR, UV–Vis, and thermal analyses. Elemental analyses and molar conductivity measurements in which the new binary and ternary complexes of AMI were prepared in 1:1 and 1:1:1 molar ratio for complex one and complex (two, three), respectively, and at 25 ± 2 °C, the molar conductivity values (Λm) of the different complexes in DMF solvent (103 M) were found [59, 62]. The molar conductivity was measured using a Jenway 4010 conductivity meter. Carbon, hydrogen, and nitrogen microanalyses were performed with a CHNS-932 (LECO) Vario elemental. A triforce XMTD-3000 was used to evaluate the melting point. The electron ionization technique at 70 eV with an MS-5988 GS-MS Hewlett-Packard apparatus was used to record the mass spectra of the prepared complexes [63]. The various chelates' IR spectra in the KBr disc in the 4000–400 cm−1 range were evaluated on a PerkinElmer 1650 spectrometer to assess the different ligands-metal ions' binding modes in the chelates and compared to the free ligands [64]. The synthesized chelates' UV–vis spectra in DMF solvent were measured by automated spectrophotometer UV–vis Perkin–Elmer Model Lambda ranging from 200 to 700 nm at room temperature [65]. The thermogravimetric (TG) and differential thermogravimetric (DTG) tests of solid complexes were made with a heating rate of 10 °C min−1 from 30 to 1000 °C on a Shimadzu TG-50H thermal analyzer [66].

Cytotoxicity (MTT assay)

The MTT assay is a colorimetric method for evaluating cell viability that is sensitive, quantitative, and repeatable. The assay is focused on the ability of mitochondrial lactate dehydrogenase enzymes (LDH) in living cells to transform the water-soluble substrate 3-(4,5-dimethylthiazol-2-yl) 2,5 diphenyl tetrazolium bromide (MTT) into a dark blue water-insoluble formazan. To dissolve the insoluble purple formazan product into a colored solution, a solubilization solution (dimethyl sulfoxide) is added. The absorbance of this colored solution can be measured with a spectrophotometer at a wavelength of 570 nm [67]. The cytotoxic effect of metal complexes and cisplatin as positive control on cancer cell lines, specifically the human breast cancer cell line (MCF-7) and cervical cancer cell line (HeLa), was assessed by the MTT assay. These cells were cultured in Ninety-six well plates (10,000 cells/well) and lifted for 48 h for attaching. Both types of precultured cell lines were exposed to different concentrations of metal complexes and a controlled drug (cisplatin) for 48 h at 37 °C using a two-fold serial dilution procedure. Treated cell lines were examined microscopically to detect morphological changes and detached cells. Phosphate-buffered saline (pH 7.2 0.2) removed dead cells (PBS-0.05 percent Tween). Residual live cells were stained with 0.5% MTT at a 25 μL/well concentration. For 3–4 h, plates were incubated at 37 °C. For 30 min on a plate shaker, 0.05 mL DMSO was used to dissolve newly formed intra-cytoplasmic MTT formazan crystals. The IC50 values of metal complexes and control were calculated using the Master-plex-2010 program [68, 69].

Using the MTT assay, the viability of the cells was evaluated where optical densities were evaluated at 570 nm using an ELISA plate reader (Biotek—8000, USA). The viability percentage was calculated as follows: Cell viability percentage = (OD of treated cells/OD of untreated cells) × 100 [70, 71].

Antimicrobial activity

The synthesized complexes' biological activity was assessed by a modified Kirby–Bauer disc diffusion method in vitro [72] using six bacteria: three Gram-negative: Escherichia coli, Neisseria gonorrhoeae, and Pseudomonas aeruginosa and three Gram-positive: Bacillus subtilis, Staphylococcus aureus, and Streptococcus faecalis and using two fungi: Aspergillus flavus and Candida albicans. Standard Ampicillin (Antibacterial agent) and Amphotericin B (Antifungal agent) were positive controls for antimicrobial activity, while filter discs impregnated with 10 µL of solvent (DMSO) were used as a negative control. Using the disc diffusion process, every pathogenic organism's isolated colony should be chosen from primary agar plates and checked for susceptibility [73]. The species are cultured on a nutrient agar medium placed in a petri dish. After that, 10 µ of the stock solution concentrations tested were loaded on sterile paper discs with a diameter of 8.0 mm. When a chemical is impregnated, a filter paper disc is mounted on agar, and the chemical diffuses from the disc into the agar [74]. Due to this diffusion, the chemical would only be present in the agar around the disc. The chemical's solubility and molecular size were used to determine the chemical infiltration area around the disc. An organism placed on the agar will not grow in the area around the disc if it is susceptible to the chemical. This area of no growth around the disc is called the inhibition zone. The diameters of this zone were measured after gram-positive and gram-negative bacteria were incubated at 35–37 °C for 24–48 h and fungi were incubated at 30 °C for 24–48 h [72] using slipping calipers from the National Committee for Clinical Laboratory Standards [73]. Disc diffusion methods are simpler and faster than broth-based methods [75, 76].

Determination of oxidative stress markers

A commercially available kit measured catalase activity and Malondialdehyde (MDA) levels.

Determination of catalase activity

One of the body's defense mechanisms versus hydrogen peroxide (H2O2) is catalase, an antioxidant enzyme in most aerobic cells, where H2O2 is a powerful oxidant that causes intracellular damage. At 25 °C and pH 7.0, each unit of catalase decomposes 1 μM of H2O2 per minute. Catalase assay is considered an antioxidant Biomarker; in addition to that, it provides another valuable tool for oxidative stress research [77]. The catalase activity was measured spectrophotometrically using the Aebi method [78], in which catalase interacts with a specific amount of H2O2. With a catalase inhibitor, the reaction is halted in exactly one minute. When peroxidase (HRP) is present, the residual H2O2 interacts with 3,5-Dichloro-2-hydroxybenzene sulfonic acid (DHBS) and 4-aminophenazone (AAP) to generate a chromophore with a color intensity that is inversely proportional to the amount of catalase in the original sample. Then, the chromophore color's absorbance was recorded at 510 nm.

Determination of lipid peroxidation

Malondialdehyde (MDA) levels were used to assess lipid peroxidation, and the assessment of lipid peroxidation in cells is a vital sign for determining the extent of oxidative stress [79]. Ruiz-Larrea et al.'s [80] method assessed MDA by measuring thiobarbituric reactive species. In this method, the tubes that contained the samples and standards were prepared, and TBA solution was added to each tube and mixed well. Then heat it in a boiling water bath for 30 min and then cool in ice bath for 10 min. In this assay, the Malondialdehyde in the samples interacts with thiobarbituric acid (TBA) in an acidic medium at 95 °C to generate the thiobarbituric acid reactive product. A spectrophotometer measures the pink product's absorbance at 534 nm. The intensity of the color indicates the MDA concentration [81].

Measurements of antioxidant activity utilizing the DPPH radical scavenging method

Free radical scavenging activity of newly prepared AMI complexes in MCF-7 and HeLa cancer cell lines was assessed by 1, 1-diphenyl-2-picryl hydrazyl (DPPH). Due to its odd electron paramagnetic properties, DPPH is a stable radical in this assay [82]. In a nutshell, a 0.1 mM DPPH solution was prepared in ethanol, and 1 m from this solution was then added to 3 mL of different supernatant from cancer cell lines (treated and controlled) in ethanol at different concentrations (3.9, 7.8, 15.62, 31.25, 62.5, 125, 250, 500, 1000 μL/mL). The mixture was vigorously mixed and set aside for 30 min at room temperature. During this period, the DPPH radical became diamagnetic when it could accept an electron from sample molecules [82]. Then, a spectrophotometer (UV–Vis Milton Roy) measured the absorbance at 517 nm. The Log dose inhibition curve was used to compute the samples’ SC50 value, defined as the samples' concentration that can inhibit the DPPH free radical by 50% [83]. Using the following equation, the % DPPH scavenging effect was calculated: DPPH scavenging effect (%) or Percent inhibition = \(\frac{{A}_{C}-{A}_{S}}{{A}_{C}}\)  × 100%. Where AC is the absorbance of DPPH only and AS is denoted by the absorbance in the presence of tested samples.

DNA comet assay (single cell gel electrophoresis)

The comet assay, the alkaline single-cell gel electrophoresis assay [84], identifies DNA strand breakage at the single-cell level with significant sensitivity. The comet test is a commonly used technique to determine whether or not chemical substances are genotoxic [85,86,87,88]. The Comet assay measured the DNA damage in MCF-7 and HeLa cell lines after treating these cells with newly prepared AMI complexes for 48 h. The comet assay s alkaline version was performed following the method reported by Singh and his collaborators with minor alterations [84]. At 35–45 °C, 10,000 treated and untreated cells were suspended in a final concentration of 0.5–1.0% LMPA (Low Melting Point Agarose) and allowed for at least two minutes before placing all those cells on a microscope slide. The slides were allowed to harden for a short time (5 min) at 4 °C and covering with a coverslip, After that, the slides were immersed in an ice-cold alkaline lysis buffer (2.5 M NaCl, 10 mM Tris, 100 mM EDTA, 1% Triton X-100, final pH 10.0) for 1 h at 4 °C so, the cells were lysed, because the lysing solution would break down the cell membrane, and also it would release the DNA from histone for studying DNA damage by this method, after that removing the slides from lysis solution and then immersed it in Electrophoresis Buffer (alkaline buffer(0.3 M NaOH, 1 mM EDTA, pH > 13) for 20 min to enable DNA unwinding and the expression of alkali-labile damage and electrophoresis (0.74 V/cm, 300 mA, 30 min) was then performed and then immersing the slides in 70% ethanol for 5 min before being removed, tapped, and left to dry at room temperature and following that, the slides were stained with 80L 1X Ethidium Bromide, left for 5 min and to remove excess of dye then, placing it in distilled water, All of the preceding procedures were carried out in dark illumination to avoid any additional DNA damage caused by sunlight. To evaluate DNA damage, observations of EtBr-stained DNA were performed using a 40 × objective on a fluorescent microscope and subsequently utilizing Kinetic Imaging, Ltd.'s Komet 5 image processing software(Liverpool, UK) for studying DNA in the cell by calculating the percentage of migrated DNA, the length of DNA migration, %DNA in tail and also measured tail moment. In most cases, 50 to 100 cells were randomly selected and evaluated per slide [84, 89,90,91,92,93,94,95].

DNA extraction from cancer cell lines

A 1.5 mL microfuge tube added 0.5% SDS extraction buffer to 200 μL (around 1 × 104–5 × 106 cells) of cell suspension (treated and untreated). Then, 50μL of proteinase-K solution (10 mg/mL) was added. After that, the tubes were mixed and incubated for 12 h at 55 °C for 3 days with occasional vigorous mixing. Following that, the tubes were removed from the incubator, and each tube was applied to a vortex for 2–5 s after adding 0.7–0.8 mL (phenol: chloroform: isoamyl alcohol in the ratio of 25:24:1). Then, the samples' centrifugation was performed for 3–5 min at 12.000 rpm. Subsequently, from each sample, 400–500 μL of the aqueous layer was removed and placed in a new tube, and each tube was then filled with 40–50 μL 3 M sodium acetate pH 5.3 100% ethanol added until the 1.5 mL mark was reached. For DNA precipitation, each sample tube was set aside at − 20 °C overnight and subsequently centrifuged again for 20 min at 12.000 rpm, and then the supernatant and any excess fluid were removed. The DNA pellet was extracted from treated and untreated cells. It was allowed to be dissolved in 50 μL of tris EDTA buffer and then processed to agarose gel electrophoresis for migration distribution analysis [96].

Agarose gel electrophoresis of extracted DNA

Identical amounts of DNA (10 μL) were extracted from control and treated cell suspension samples and were combined with two μL of gel-loading dye. The prior mixture was then poured into the wells of the solidified gel. The DNA electrophoresis was performed at 50 V for around 2 h on a 1% agarose gel in Tris–acetate EDTA (TAE) buffer containing 0.1 mg/mL ethidium bromide (EtBr) for staining samples. The image analysis software was used to analyze DNA sample migration distribution [96].

Statistical analysis

The data regarding antimicrobial activity, oxidative stress parameters, and comet assay parameters were presented as means ± S.E.M. To compare statistical differences (P-value) between treated and untreated samples data of comet assay and oxidative stress parameters, using SPSS to run a one-way analysis of variance (ANOVA) with the least significant difference (LSD) test. The statistically significant difference is denoted by p < 0.05. The given data's percentage difference (D %) was also calculated as follows:

$$ D\% = \frac{treated\,value - control\,value}{{control\,value}} \times 100\% . $$

Results and discussion

Characterization of AMI complexes

Elemental analyses and molar conductivity measurements

New binary and ternary AMI complexes were prepared in 1:1 and 1:1:1 molar ratios for complexes one, two, and three. Elemental analysis results (C, H, N) agree with the formulas in Table 1. Complexes display sharp melting points indicating their high purity. Elements (C, H, N, and metal content), melting points, molecular formulas, and compound yields are listed in Table 1 of the compound study. Different Complexes in DMF solvent (10−3 M) exhibit molar conductance of 9–26 Ω−1 mol−1 cm2 at 25 °C ± 2 °C. These low values indicate a non-electrolytic nature. Thus, chloride is located in the coordination sphere in a complex one, and the secondary ligand likely behaved as a dinegative, bidentate moiety [62, 97, 98]. The results are tabulated in Table 1.

Table 1 Physical and analytical data of AMI binary and ternary metal complexes

Mass spectral studies

The mass spectra of complexes 1, 2, and 3 as representative complexes (Fig. 6), Complexes 1, 2 and 3 provide good evidence for the molecular formulas from their highest mass peak at m/z 250, 249, and 280, respectively, which agree well with the proposed formula weights for the non-hydrated or non-solvated complexes. All complexes' mass spectra reflected the presence of the AMI (primary ligand) at m/z 170 (calcd. 170.4 g/mol) [63, 99, 100].

Fig. 6
figure 6

Mass spectra of different complexes. A Complex one [Pd(AMI)Cl2], B complex two [Cu(AMI)L1] and C complex three [Cu(AMI)L.2·2H2O]

IR spectral analysis

IR measurements show a sharp band at 3230 cm−1 attributed to free AMI (NH2) stretching vibration (Table 2 and Fig. 7). This band shifted in all complexes. Small intensity bands at 611–676 cm−1 were attributed to ρ(NH2) bending vibrations, further supporting the coordination of NH2 nitrogen atoms with metal ions [64]. IR spectra of complexes two and three showed an absence of OH group bands, confirming the deprotonation of malonic and oxalic acids during coordination [101]. IR spectrum of the parent AMI ligand showed stretching vibrations of υ(C=N) of the imidazole ring at 1562 cm−1. The ν(C=N) stretching vibration shifted to higher frequencies, 1585–1602 cm−1, in the complexes, which may imply that the υ(C=N)imidazole nitrogen participates in coordination (Table 2).

Table 2 Important infrared bands of AMI binary and ternary metal complexes
Fig. 7
figure 7

IR spectra of complexes. A Complex one (Pd(AMI)Cl2), B complex two (Cu(AMI)L1) and C complex three (Cu(AMI)L2·2H2O). Where T: transmittance

The AMI ligand behaved as a neutral bidentate ligand coordinated with metal ions via imidazole and NH2 nitrogens. In contrast, malonic and oxalic acids functioned as uni-negative, bidentate ligands via carboxylate O and amino N. The spectra of complexes two and three showed bands at 1492–1502 and 1342–1359 cm−1, corresponding to ν(COO)asy and ν (COO)sym groups, respectively. This band shift may imply that the secondary ligand is coordinated with metal ions via carboxylate oxygen [102, 103]. New bands at 419–485 cm−1 and 547–550 cm−1 appeared when M–N and M–O form in spectra of various chelates.

The UV–vis spectral studies

The electronic spectra in DMF solution (Table 3 and Fig. 8). showing absorption of high energy 243–250 nm and 320–342 nm are assigned to the intraligand π → π and n → π. π → π transitions respectively. For complex 1 and complex 2, the intraligand charge transfer band appeared at 490 and 418, respectively [65, 104, 105]. ‏

Table 3 UV–Vis transitions of AMI binary and ternary metal complexes
Fig. 8
figure 8

Metal complexes' UV–Vis spectra. A Complex one (Pd(AMI)Cl2), B complex two (Cu(AMI)L1) and C complex three (Cu(AMI)L2·2H2O)

Thermal studies

TG and DTG techniques are useful for determining the thermal stability of Schiff base ligands and mixed ligand chelates to assess the thermal decomposition behavior of new complexes. The TG and DTG results were tabulated in Table 4. Complex one (Pd(II) chelate) decomposed in three stages (Fig. 9). The first two decomposition stages occurred at 145–465 °C. These stages might be 2HCl gas and HCN molecule loss with a mass loss of 36.95% (calcd 36.43%). The third stage, at 465–730 °C, reflects C2H4N2 molecule loss with a mass loss of 20.65% (calcd 20.40%). The final product of degradation is Pd contaminated with a carbon atom.

Table 4 Thermal analysis results (TG and DTG) for AMI binary and ternary metal complexes
Fig. 9
figure 9

TGA/DTA curves for newly prepared AMI complexes. A Complex one [Pd(AMI)Cl2], B complex two [Cu(AMI)L1] and C complex three [Cu(AMI)L2·2H2O]

The first stage of complex 2 decompositions occurred at 120–370 °C and corresponded to the loss of hydrated NH3 and 2CO2 gas with a gradual mass loss of 42.25% (calcd 42.25%). The second and third decomposition stages at 370–1000 °C reflect C2H4N2O molecule loss with a mass loss of 29.02% (calcd 28.97%). The final product, CuO, was contaminated with carbon atoms.

Complex three's thermal degradation occurred in four degradation steps at 105–1000 °C. The first two degradation stages, at 105–395 °C, correspond to the loss of two coordinated water molecules and CO2 gas with a mass loss of 26.43% (calcd 26.81). The third and fourth degradation stages occurred at 395–1000 °C and reflected the loss of the C5H9N3O fragment with a mass loss of 43.01% (calcd 42.55%), leaving CuO as a residue with one carbon atom [66, 106].

Anticancer studies

MCF-7 and HeLa cancer cells were incubated for 48 h with the newly prepared AMI complexes and cisplatin. IC50 values by MTT assay reflect cytotoxicity, and IC50 is defined as the concentration that can inhibit cancer cell growth by 50% [65] (Figs. 10, 11, 12, 13) and (Table 5). The standard drug (cisplatin) is strongly cytotoxic in MCF-7 and HeLa cells with IC50 values of 0.067 ± 0.0008 and 0.023 ± 0.002 μM. AMI complexes showed anticancer activity; however, their activity was less than cisplatin. Complexes one and two were more potent cytotoxic effects than complex three. Complex three was weakly cytotoxic against MCF-7 cancer cells, IC50 of 0.277 ± 0.002 μM. Complex two as the most active versus MCF-7 cells (IC50 = 0.125 ± 0.001 μM). The IC50 for the complex one was 0.156 ± 0.0006 μM. IC50s in HeLa cells for complex one, two, and three were 0.222 ± 0.0005, 0.126 ± 0.0009, 0.152 ± 0.001 μM, respectively. Complexes one and three were deemed to show moderate anticancer activity compared to complex two. Complex two as the most active against HeLa cells (IC50 = 0.126 ± 0.0009 μM). From the MTT results, it can be suggested that complex two (Cu(AMI)L1) shows strong anticancer activity against MCF-7 cells with IC50 0.125 ± 0.001 μM, and its activity is close to cisplatin with IC50 0.067 ± 0.0008 μM. Cu(AMI)L1 complex might be a potential pharmacological drug for breast cancer treatment. Cu(AMI)L1 complex's potential cytotoxicity can be linked to the strong DNA-complex binding ability [107, 108]. DNA-complex binding ultimately causes cell death [109]. Moreover, Tweedy's chelation theory suggests that the cytotoxic efficacy of complexes may be attributable to the focal metal atom [110]. Changes in coordination sites and type of metal ion affect biological activity via DNA binding ability [111]. We conclude that palladium chelate produces a strong anticancer activity in MCF-7 cells. Similarly, Karami et al. [112] found that palladium complexes show cytotoxicity toward multiple cancer cells, including MCF-7 breast cancer cells. Complex two was also more cytotoxic than the other metal complexes against HeLa cells. Thus, complex two is the most active against both MCF-7 and HeLa cells, and its toxicity is similar in these cell lines. The complexes, [Cr(MSEB)Cl2(H2O)2] (1), [Fe(MSEB)(NO3)2(H2O)2] (2) and [Cu(MSEB)Cl(H2O)3] (3) where MSEB = 1-(2-hydroxyethyl)-4,5-diphenyl-1H-imidazole-2-yl)(4-bromophenol)) were synthesized by Abu-Dief et al. [61]. Cytotoxicity of complexes was evaluated in vitro against Colon (HCT-116), Breast (MCF-7), and hepatic cellular (HepG-2) carcinoma cell lines. Results showed that complex 3 (MSEBCu) demonstrated the highest anticancer activity compared to other complexes to inhibit the growth of all cancer cells.

Fig. 10
figure 10

The graphical representation of the synthesized complexes' IC50 values in MCF-7 cancer cell lines. Different symbols indicate significant (p < 0.05) different means

Fig. 11
figure 11

The graphical representation of the synthesized complexes' IC50 values in HeLa cancer cell lines. Different symbols indicate significant (p < 0.05) different means

Fig. 12
figure 12

The survival curve of MCF-7 cells treated with different concentrations of synthesized complexes

Fig. 13
figure 13

The survival curve of Hela cells treated with different concentrations of synthesized complexes

Table 5 IC50 values of synthesized complexes in μM in vitro

Effect of complexes on oxidative stress in vitro

Malondialdehyde (MDA) level and catalase activity as oxidative and antioxidative stress markers were measured in MCF-7 and HeLa cells treated with metal complexes compared to untreated cancer cells. Cancer cells were treated for 48 h with complex one, two, and three at IC50 concentrations for MCF-7 cells of 0.156, 0.125, 0.277 μM, respectively, and 0.222, 0.126, 0.152 μM, respectively, for HeLa cells.

Effect of complexes on catalase activity

MCF-7 cells treated with complex two induced a significant increase in catalase activity (50%) in comparison to the untreated cells (control) and other complexes one and three (− 66.7% and − 75%, respectively (Table 6 and Fig. 14). Compared to the control group, cells treated with complexes one and three showed a significant decline in catalase activity. Also, non-significant changes in catalase activity were observed after treating cells with complexes one and two. HeLa cells treated with complex three displayed significantly increased catalase activity (73.7%) in comparison with control and other complexes one and two (10.5% and − 21.1%, respectively) (Table 7 and Fig. 15). In addition, cells treated with complex two showed significantly increased levels of catalase activity in comparison to cells treated with a complex one. Also, the catalase activity of cells treated with complex two is not significantly increased compared to the control. Cells treated with complex one showed significantly reduced catalase activity compared to control cells. MCF-7 and HeLa cells responded differently to a treatment. MCF-7 cells treated with complex two showed increased catalase levels, but complexes one and three decreased catalase activity compared to untreated cells. In contrast, complex one (palladium complex) decreased catalase activity in HeLa cells, and complexes two and three (copper complexes) increased activity compared to untreated cells. Responses in catalase activity appear to depend on the type of cancer cell.

Table 6 Effect of complexes on some oxidative stress parameters in MCF-7 cells
Fig. 14
figure 14

The graphical representation of the effect of complexes on some oxidative stress parameters in the MCF-7 cells. Different symbols indicate significant (p < 0.05) different means

Table 7 Effect of complexes on some oxidative stress parameters in the HeLa cells
Fig. 15
figure 15

The graphical representation of the effect of complexes on some oxidative stress parameters in the HeLa cells. Different symbols indicate significant (p < 0.05) different means

Catalase is a crucial antioxidant enzyme in cellular defense against oxidative stress, as shown in various cancers [113]. Catalase converts H2O2 to water and molecular oxygen [114], thus protecting cells from H2O2-induced stress [115]. Catalase is thus an essential index for determining oxidative stress levels [116, 117]. Some complex-treated cells exhibit low catalase activity, promoting oxidative stress by promoting mitochondrial dysfunction, elevated ROS levels, and reduced antioxidant defenses [118]. Treatment of HeLa cells with copper complexes and MCF-7 cells with complex two (copper complex) induces an increase in catalase activity that may strengthen protection from oxidative damage by scavenging excess free radicals ‏ [119]. Also, treatment of MCF-7 and HeLa cells with the palladium chelate caused a decrease in catalase activity.

Effect of complexes on malondialdehyde (MDA) levels

Treatment with complex three caused a significant increase in MDA levels in MCF-7 cells (56.25%) compared with untreated cells and complexes one and two (15.6% and 9.4%, respectively) (Table 6 and Fig. 14). A non-significant difference was seen between cells treated with complexes one versus two in MDA levels. No significant change was observed in MDA levels between cells treated with complex two and untreated cells. Further, complex one caused a significant increase in MDA levels relative to untreated cells.

MDA levels in HeLa cells treated with complex one increased significantly (59.7%) compared with untreated cells and complexes two and three (8.4% and 27.7%, respectively) (Table 7 and Fig. 15). MDA levels increased significantly in cells treated with complex three compared to complex two and untreated cells. The increase in MDA levels after the complex two treatment was significant. In response to oxidative stress, reactive intermediates can alter membrane bilayers and cause polyunsaturated fatty acid lipid peroxidation [120,121,122]. Reactive aldehydes such as 4-hydroxynonenal (4-HNE) and Malondialdehyde (MDA) are generated during lipid peroxidation [123, 124]. A significant difference in MDA levels between cancer cell types (MCF-7 and HeLa) after complex treatment was noted.

Nevertheless, MCF-7 cells treated with complex two produced a non-significant increase in MDA levels compared with untreated cells. MDA levels increased in MCF-7 cells treated with complex three (copper complex) as compared to untreated cells; similar results were reported by Khan et al. [125] and Alharbi et al. [126]. The highest MDA levels were seen after treatment with the copper complex. These levels may be related to reactive oxygen species (ROS) generation in carcinoma cells. An elevated ROS level causes lipid-based radical formation and accelerates MDA production [127]. HeLa cells treated with complex one (pallidum complex) showed elevated MDA levels relative to untreated cells and the copper complexes. Thus, the type of metal and ligand influenced the levels of MDA. Metals can induce lipid peroxidation, such as copper [128]. MDA levels in cancer cells depend on the concentration of complexes; higher concentrations lead to higher MDA levels. For example, the treatment of MCF-7 cells with complex three at a higher concentration than other complexes (0.277 μM) and treatment of HeLa cells with complex one at a concentration (0.222 μM). Hence, complexes that exhibited low cytotoxicity caused an increase in MDA levels in these cells. Finally, cancer cells treated with complex three showed increased MDA levels in both cell types; complexes one and three induced an increase in MCF-7 cells. Complex one in HeLa cells caused a decrease in catalase activity and increased oxidative stress, as evidenced by elevated MDA levels and reduced catalase activity. Cell membranes, mitochondria, DNA, and nuclei are damaged by increased oxidative stress, resulting in cancer cell death via apoptosis [129,130,131].

Assessment of antioxidant activity utilizing the DPPH radical scavenging method

The newly prepared AMI complexes' antioxidant activity on MCF-7 and HeLa cancer cell lines is assessed using a DPPH (1,1-diphenyl-2picrylhydrazyl) radical scavenging test. MCF-7 cells were treated for 48 h with complexes one, two, and three at their IC50 values of 0.156, 0.125, and 0.277 μM, respectively. Likewise, HeLa cells were treated at their IC50 values of 0.222, 0.126, 0.152 μM, respectively. Radical scavenging activity increased with complex concentrations (Figs. 16, 17). SC50 values in MCF-7 cells were 227.5 ± 0.28, 901.6 ± 0.23, and 612.5 ± 0.57 μL/mL, respectively; the SC50 was 992 ± 1.15 μL/mL in untreated cells. Similarly, HeLa cell SC50's were 361 ± 1.2, 619.5 ± 0.86, and 835.5 ± 0.63 μL/mL, respectively, compared to 814.5 ± 1.45 μL/mL in untreated cells. Better DPPH radical scavenging efficacy is indicated by lower SC50 values [132]. Complex one in MCF-7 cells exhibits higher scavenging activity than other complexes and control cells. This complex may be most effective in scavenging free radicals.

Fig. 16
figure 16

The complexes' free radical scavenging activity in MCF-7 cells in comparison to untreated cells (control): A DPPH scavenging% of control, B DPPH scavenging% of complex one, C DPPH scavenging% of complex two, D DPPH scavenging% of complex three

Fig. 17
figure 17

The complexes' free radical scavenging activity in the HeLa cells in comparison to untreated cells (control): A DPPH scavenging% of control, B DPPH scavenging% of complex one, C DPPH scavenging% of complex two, D DPPH scavenging% of complex three

Similarly, treating the HeLa cells with complex one produced the lowest SC50, again suggesting relatively efficient free radical scavenging. Complex one might be a better candidate drug where free radical generation is a primary concern. Complexes two and three might be less useful with more moderate activity. Complex antioxidant activity can be attributed to the electron-withdrawing properties of metal ions, which facilitate the release of H + atoms to reduce the DPPH radical [133]. [Pd(1,2-dimethylimidazole)2Cl2] (1) and [Pd(benzimidazole)2Cl2] (2) were synthesized by Sadaf et al. [134]. A Free radical scavenging assay assessed the antioxidant activity. Scavenging assay results showed that complex 1 demonstrated the most potent scavenging activity.

Evaluation of DNA damage by comet assay

Effect of newly prepared AMI complexes on DNA

The comet assay assesses three distinct parameters: tail length, percentage of DNA in the tail, and tail moment. These parameters reflect DNA damage caused by newly prepared AMI complexes. MCF-7 cells were treated for 48 h with complexes one, two, and three at their IC50 values of 0.156, 0.125, and 0.277 μM, respectively (Table 8 and Figs. 18, 20). Damage percentage increased significantly when cells were treated with complex two compared to control and other complexes. Also, complex three significantly increased damage percentage compared to complex one and control cells. Complex one produced only a non-significant increase in damage percentage compared to control cells. In particular, complex two induce significant increases in tail length and tail moment compared to other complexes and control cells.

Table 8 Effect of complexes (IC50 = 0.156, 0.125, 0.277 μM, respectively) on the DNA of MCF-7 cells: Comet Damage (%), tail length, DNA in the tail (%), and tail moment
Fig. 18
figure 18

Fluorescence-stained comet images of MCF-7 cells. A Control, B Comet image of MCF-7 treated with complex one with IC50 0.156 Μm, C Comet image of MCF-7 treated with complex two with IC50 0.125 μM, D Comet image of MCF-7 treated with complex three with IC50 0.277 μM

In contrast, complexes one and three displayed significant decreases in tail length and tail moment compared to control cells. A non-significant difference in the tail moment between complexes one and three was also observed. After treatment with all three complexes, a significant decrease in the percent of DNA in the tail was seen. Also, no significant differences in the percent DNA in the tail were observed among complexes.

HeLa cells were treated for 48 h with complexes one, two, and three at their IC50 values of 0.222, 0.126, 0.152 μM, respectively (Table 9 and Figs. 19, 20). Percent damage, tail length, tail moment, and percentage of DNA in the tail increase significantly compared to control cells. Complex one exhibited the greatest overall impact, significantly increasing the percent damage. Further, significant increases in the tail length, percent DNA in the tail, and tail moment were induced by complex two; other complexes showed lesser effects. A significant increase in DNA in tail and tail moment was induced by complex three compared to complex one, and a non-significant difference in tail length between complexes one and three were noted. The tail length, percent DNA in the tail, and the tail moment significantly increased after complex one treatment.

Table 9 Effect of complexes (IC50 = 0.222, 0.126, 0.152 μM, respectively) on the DNA of HeLa cells: Comet Damage (%), tail length, DNA in Tail (%), and tail moment
Fig. 19
figure 19

Fluorescence-stained comet images of HeLa cells. A Control, B Comet image of HeLa treated with complex one with IC50 0.222 μM, C Comet image of HeLa treated with complex two with IC50 0.126 μM, D Comet image of HeLa treated with complex three with IC50 0.152 μM

Fig. 20
figure 20

DNA damage in terms of Tail Length, %DNA in tail, and Tail Moment in A MCF-7, B HeLa cells. Different symbols indicate significant (p < 0.05) different means

The alkaline comet test was used in the current study. With the lowest IC50 in MCF cells, Complex Two exhibited significantly greater DNA damage than other complexes for all three parameters-tail length, percent DNA in the tail, and tail moment. Treatment of MCF-7 cells with complexes one and three showed intact DNA (the head), similar to control cells. These complexes did not induce significant DNA damage. Significant decreases in comet parameters of tail length, percent DNA in the tail, and tail moment were noted.

HeLa cells treated with complex two, with the lowest IC50, induced greater DNA damage than other complexes. Also, complex three showed greater DNA damage than complex one. Still, complex one did cause significant damage. Thus, HeLa cells treated with copper complexes (complexes two and three, whose IC50 is lower than the palladium complex) induced significantly more DNA damage than HeLa cells treated with the palladium complex (complex one). Serious DNA damage, as evidenced by a significant increase in comet assay parameters as tail length, %DNA in the tail, and tail moment in the complexes-treated HeLa cells versus the control cells. Complex two induces the greatest DNA damage and similarly affects HeLa and MCF-7 cells. DNA fragmentation in HeLa cells treated with any complex and MCF-7 cells treated with complex two displayed the comet-like form. No DNA fragmentation was observed in control cells where no “comet” formed. Electrophoretic migration of DNA fragments increased toward the anode compared to control cells. This was observed from comet parameters and the figures of comets (Figs. 18c and 19b–d). ROS mediates DNA strand breaks caused by complexes, such as superoxide anions and hydroxyl radicals [135].

DNA fragmentation by gel electrophoresis

DNA fragmentation of cancer cells treated with complexes compared to untreated was examined using agarose gel electrophoresis (Fig. 21). DNA from untreated MCF-7 cells (lane F) does not show fragmentation. However, DNA from cells treated with complexes (lanes G, H, and I) exhibits an unusual smearing pattern and fragmentation. DNA from cells treated with complex three (lane H) exhibits large, slow-moving fragments, as seen by the smear's increased intensity toward the lane's onset. DNA fragments in cells treated with complex one (lane I) are more mobile than fragments in lanes G and H, where the intensity of the smear is significant toward the end of the lane, indicating tiny fragments.

Fig. 21
figure 21

Study of DNA degradation of cancer cells treated with complexes using agarose gel electrophoresis. Lane A: DNA marker: Lane B: Untreated DNA of HeLa cells: Lane C: DNA + complex two (Cu(AMI)L1): Lane D: DNA + complex three (Cu(AMI)L2·2H2O): Lane E: DNA + Complex one (Pd(AMI)Cl2). For MCF-7 cells, Lane F: untreated DNA of MCF-7 cells: Lane G: DNA + complex two: Lane H: DNA + complex three: Lane I: DNA + complex one

DNA of untreated HeLa cells (lane B) shows no smearing, confirming normal DNA. Noticeable smearing is seen for complexes two and three (lanes C and D). Conversely, treatment with complex one (lane E) induced no smearing. DNA fragments in lanes C and D are more mobile than untreated DNA (lane B) and lane E. Perhaps, DNA intensity from treated cells decreased because of the binding‏ of complexes to DNA [136]. Moreover, complex two has a comparable impact on HeLa and MCF-7 treated cells. Thus, metal ions play a crucial role in DNA interactions and may inhibit the growth of pathogens by interacting with the genome [137].

Antimicrobial activity

Antibacterial activity

Antibacterial activity was assessed versus six bacterial strains using ampicillin as a reference drug and DMSO as the solvent. DMSO did not affect bacterial growth. Inhibition zones were measured in millimeters (see Figs. 22, 23). AMI complexes were less effective antibiotics than ampicillin. Results in Table 10. The complex one caused the largest inhibition zone (16 ± 0.76 mm) against Bacillus subtilis. This zone was more prominent than for complexes two and three (11 ± 0.57 mm and 13 ± 1.0, respectively)., Similarly, complex one showed greater activity versus Staphylococcus aureus than complex two (inhibition zones of 14 ± 1 and 9 ± 0.28 mm, respectively). The size of inhibition zones did not differ between complexes one and three. Complex three exhibited the largest inhibition zone against Streptococcus faecalis (18 ± 1.15 mm); significantly smaller zones were noted for complexes one and two (15 ± 0.87 and 11 ± 0.5 mm, respectively). Zones for the latter two complexes did not differ insignificantly.

Fig. 22
figure 22

The antibacterial activity of complexes

Fig. 23
figure 23

In vitro antibacterial activity of complexes regarding inhibition zone diameter in mm in vitro. Different symbols indicate significant (p < 0.05) different means

Table 10 Inhibition zone diameter of complexes in mm in vitro

Complexes did not produce differences in inhibition zones for Gram-negative Escherichia coli. A larger inhibition zone was induced by complex three (16 ± 0.52 mm) against Pseudomonas aeruginosa than by complexes one and two (12 ± 0.07 and 11 ± 0.31 mm, respectively). The latter inhibition zones were not significantly different. Non-significant differences in inhibition zone diameters among complexes were observed for Neisseria Gonorrhoeae.

Complex one demonstrated notable antibacterial activity against B. subtilis and S. aureus, consistent with Amoah et al. [138]. These authors suggested that metal complexes penetrate and disrupt bacterial cell walls [139]. Compared to Gram-negative bacteria, Gram-positive bacteria were more susceptible to the palladium complex. This activity may be attributed to the structure of bacterial cell walls [56]. The cell wall of Gram-positive bacteria has many layers of peptidoglycan. Bacteria cannot survive without a cell wall, and certain antibiotics kill bacteria by blocking peptidoglycan synthesis. Conversely, Gram-negative bacteria have thinner peptidoglycan cell walls and a second membrane formed by lipopolysaccharides and lipoproteins [140]. These differences in cell wall structure lead to differences in antibacterial susceptibility; certain antibiotics are exclusively effective against Gram-positive bacteria, and others are ‏ineffective [141].

The antibacterial activity of complexes varies depending on microbial cell permeability [142]. Regarding Pseudomonas aeruginosa, complexes one and two demonstrate similar antibacterial activity and no significant differences were noted in activity among complexes against E. coli and N. Gonorrhoeae. The antibacterial activity of complex three is superior against P. aeruginosa. Complex three is also most effective against Str. faecalis might be effective in treating diseases caused by this organism. Copper complexes two and three show activity against P. aeruginosa and E. coli, consistent with Adimule et al. [143]. Electron delocalization upon complexation throughout the chelate ring may underlie the antibacterial activity of metal complexes; lipophilicity and penetration across cell membranes are enhanced by chelation [144].

Antifungal activity

Antifungal activity was assessed using two fungal strains with amphotericin B as a reference drug and DMSO as a solvent that does not inhibit fungal growth. Again, inhibition zones were measured millimeters (see Table 10 and Figs. 24, 25). Complex two induced a larger inhibition zone against Aspergillus flavus (11 ± 0.12 mm) than complexes one and three (0.0 ± 0.0 mm and 9 ± 0.05, respectively). Conversely, complexes one and three show larger inhibition zones (9 ± 0.19 and 9 ± 0.34 mm, respectively) than complex two, with zero inhibition zone against Candida albicans. According to these results, it can be deduced that complexes one and three give weak activity against Candida albicans, and complex two does not have any effect (activity) on Candida albicans.

Fig. 24
figure 24

The antifungal activity of complexes

Fig. 25
figure 25

In vitro antifungal activity of complexes regarding inhibition zone diameter in mm. Different symbols indicate significant (p < 0.05) different means

Copper complexes show better activity against Aspergillus flavus, consistent with Abdelkarim et al. [56], and palladium chelate does not display activity against Aspergillus flavus. Thus, activity depends on the metal ion [55] and possibly on the type of ligand. Adsorption of metal ions on microbial cell walls disrupts respiration and consequently prevents the synthesis of essential proteins, suggesting that growth inhibition necessitates the presence of metal ions [145]. Metal chelates have a higher level of lipophilicity that may explain improved activity against some fungi [146]. Some metal complexes show no activity, perhaps due to their insolubility in the medium or inability to penetrate the cell membrane [147]. Hence, antifungal action is influenced by lipophilicity, which facilitates penetration across lipid membranes [145]. Gałczyńska et al. [148] synthesized the following complexes: [Cu(iaa)2H2O](1), [Co(iaa)2(H2O)2]·H2O(2), [Cu(1-allim)4(NO3)2])(3) and [Co(1-allim)6] (NO3)2(4)where (iaa) = imidazole-4-acetate anion and (1-allim) = 1-allylimidazole. The antibacterial and antifungal activities of the complexes were tested against strains of S. aureus, E. coli, P. aeruginosa, and Candida albicans. Results showed that complex 3 [Cu(1-allim)4(NO3)2] and complex 2 [Co(iaa)2(H2O)2].H2O may be used as antifungal drugs.

Conclusion

AMI complexes one, two, and three have been successfully prepared and characterized. Complexes characterization showed that the AMI ligand behaved as a neutral bidentate ligand coordinated with metal ions via imidazole and NH2 nitrogens. In contrast, malonic and oxalic acids functioned as uni-negative, bidentate ligands via carboxylate O and amino N. The anticancer activity study results reveal that complex two (Cu(AMI)L1) may be a potential pharmacological drug for breast cancer treatment. Complex two induced the most severe DNA damage in both cancer cell lines. Treatment of cells with complex one (palladium complex) decreased catalase activity. Complex one also demonstrated the greatest antioxidant activity. Gel electrophoresis results revealed complex two has a comparable impact on HeLa and MCF-7 treated cells. Antimicrobial assays identified complex three might be an effective antibacterial agent against Streptococcus faecalis.