Introduction

Melanin as the main dark macromolecular pigment is responsible for skin color and plays an important role in the protection of the skin against UV light induced damage [1]. However, hyperpigmentation disorders have been suggested to be involved in melasma, freckles, melanoma and responsible for serious and undesirable medicinal phenomena especially in elder people [2]. On the other hand, the major problem happened in food products including impairing the color, losing nutrition, texture and flavor. This unusual process results from the action of a group of enzymes especially tyrosinase (EC 1.14.18.1) as the rate-limiting enzyme which widely distributed in bacteria, fungi, plants and humans [3, 4]. The rate of enzymatic hyperpigmentation depends on the concentration of phenolic substrates, oxygen, reactive oxygen and nitrogen species, pH, temperature and tyrosinase [5]. In addition, tyrosinase inhibitors are becoming important in the cosmetic industry, due to their skin-whitening agents [6]. Furthermore, it has been reported that tyrosinase might contribute to the autoimmune disease [7], dopamine neurotoxicity and neurodegenerative disorder [8, 9]. These findings encouraged researchers to identify effective tyrosinase inhibitors for various applications in the food, cosmetics, and medicinal industries. Tyrosinase multifunctional copper-containing enzyme possesses both monophenolase and diphenolase activity which involved in catalyzing the hydroxylation of tyrosine (monophenolase activity) to 3,4-dihydroxyphenylalanine (o-diphenol or DOPA), and the oxidation of DOPA to dopaquinone (o-quinone) [10].

The literature survey reveals that a large number of tyrosinase inhibitors have been discovered from natural, synthetic and semi-synthetic sources including tropolone derivatives [11], hydroquinone derivatives, kojic acid [12], arbutin, bibenzyl glycosides [13]. Despite a large number of reported tyrosinase inhibitors, due to limitations of tyrosinase antagonism including safety and low efficacy, designing of new tyrosinase inhibitors is high demand [14, 15].

Results and discussion

Design of novel vaniline-benzylidenehydrazine hybrid

Tyrosine (Tyr), (Fig. 1, A) is one of the natural ligands of tyrosinase and modified synthetic derivatives of tyrosine have been proved to exhibit potent anti-tyrosinase activity [14]. As a result, this skeleton was chosen for further modification. Most of the used tyrosinase inhibitors such as kojic acid, p-coumaric acid (Fig. 1, B) arbutine (Fig. 1, C) hydroxy-Nʹ-methylenebenzohydrazide [16] and oxyresveratrol containing free phenolic hydroxyl group [17]. The simple phenols such as hydroquinone, resorcin and its derivatives have been reported as potent phenolic inhibitors of the tyrosinase [1]. Phenols as small and natural compounds could be useful in the designing of more potent inhibitors. Vanillin as a natural product and flavoring agent is extensively used in food and cosmetics (Fig. 1, D) with consumption of around 200 tons each year [18].

Fig. 1
figure 1

Design of new compounds targeting tyrosinase based on the hybridization strategies

Full size image

The vanillin derivatives were reported to exhibit promising anti-tyrosinase activities, with the IC50 values of 16.13 µM for the most potent compound. Besides, the molecular docking study confirmed the role of phenols motif in H-bound interaction with Ser206 residue.

  • As part of our efforts in identifying tyrosinase candidate inhibitor, we became interested in hybrids obtained by linking of vanillin and some fragments of l-tyrosine.

  • As a result molecule E was designed to explore the structural requirements of tyrosinase-inhibitory activity including the one methoxyl on meta and one hydroxy group on para position of the phenyl ring based on vanillin structure and previously reported inhibitor. Structural modifications were performed on linker type and length of l-tyrosine and p-coumaric acid. As a result, acyl hydrazide was supposedly aimed at structurally stability, reducing the probability of cleavage, the capability to involve in hydrogen bond interaction and expanding the opportunity for further derivatization. The number of reported aromatic aldehydes possessing anti-tyrosinase activity containing electron-donating or electron-withdrawing groups on 3 or 4 positions of benzene ring [19] has been selected for their potential inhibition of tyrosinase.

Chemistry

The general synthetic routes for preparing the target compounds are illustrated in Scheme 1.

Scheme 1
scheme 1

Synthesis of (E)-Nʹ-benzylidene-4-hydroxy-3-methoxybenzohydrazide derivatives 4a–k

Full size image

The 4-hydroxy-3-methoxybenzohydrazide intermediate (3, Scheme 1) were prepared using commercially available methyl 4-hydroxy-3-methoxybenzoate (1, Scheme 1) and hydrazine hydrate (2, Scheme 1) in refluxing ethanol in the presence of catalytic amounts of acetic acid under simple nucleophilic substitution reaction and completion of the reaction was monitored by TLC to give compound [20]. The treatment of 3 with an appropriate aldehyde in the presence of acetic acid in 2-propanol yielded the desired final products 4a–k (80–92%) [21]. Structural determination and signal assignments of the final compounds were accomplished by the application of IR, MASS and NMR experiments. 1H and 13C spectra are available in Additional file 1. The peaks that caught our particular attention were 13C spectra of 4b (para-substituted derivatives) in which 13 carbon signal was expected to be seen, since 15 signals were observed. The same pattern were observed for other para-substituted compounds (4c, 4e and 4f). There is evidence of the hydrazine motif presence that the two ortho ring carbons (Fig. 2. carbons 2 and 6, compound 4b, 4c and 4e) and the two meta ring carbons (carbons 3 and 5 compound 4b, 4c and 4e) are magnetically inequivalent (although equivalent by symmetry) and each gives different 13C single peak. Similar evidence was reported in previous studies containing hydrazine linker [20, 22].

Fig. 2
figure 2

Para-substituted derivatives of benzylidene-4-hydroxy-3-methoxybenzohydrazide

Full size image

Tyrosinase inhibitory activity

The series of vaniline-benzylidenehydrazine conjugates underwent biological screening for their inhibitory potential against tyrosinase. All data of 11 benzylidenehydrazine-tyrosinase derivatives and kojic acid as reference compounds were summarized in Table 1.

Table 1 Biological evaluation of the inhibitory activity of (E)-Nʹ-benzylidene-4-hydroxy-3-methoxybenzohydrazide derivatives and kojic acid against tyrosinase enzyme in the presence of L-DOPA as the substrate
figure a
Full size table

A survey on the IC50 values against the tyrosinase enzyme revealed that all compounds had significant inhibitory activity at micro-molar levels with IC50 values ranging from 1.58 to 37.09 μM. To find the influence of the type of substitution of the aryl ring on the potency of compounds the structure–activity analyses have been performed.

As it is obvious in Table 1, the aromatic ring substituents had a significant effect on tyrosinase inhibition.

  • Enzymatic assays revealed that compounds 4i and 4e exhibited the best activities against tyrosinase enzyme with IC50 values of 1.58 and 1.95 μM respectively, surpassing that of the positive control kojic acid (IC50  =  9.3 μM).

  • The comparison of nitro-substituted compounds 4f, 4j and 4k demonstrated that the introduction of the nitro group resulted in the improvement of inhibitory activity. The activity of these analogs changes in the following order: meta > orto > para. Moreover, high potency of the compounds with the strong electron-withdrawing substituent for inhibition of tyrosinase enzyme was also observed.

  • In the case of compounds containing only OH substituent on the benzene ring, moderate inhibitory activity was observed. In this respect, compounds 4a possessing 2, 4-OH substitutions (IC50 =  37.09 ± 1.02 μM) and 4b with 4-OH substitutions (IC50  =  15.21 ± 1.34 μM) on the benzene ring demonstrated moderate potencies. Surprisingly, adding extra methoxy group with electron-donating properties on the benzene ring can increase the inhibitory activity significantly like 4h with IC50 of 10.00 µM and 4 g with IC50 of 4.58 µM.

  • Analyzing the isosteric substitution of a hydroxyl group with OMe substituent (4c, 4d, 4g and 4h) showed the desired IC50 value. The low inhibitory activity was observed in compound 4c with one OMe groups while 4g with two OMe groups in 3,5 positions and one OH on 4 position was revealed higher potency (IC50 =  4.58 ± 1.23 μM). The effects of the OMe group depending on their position, bulkiness as well as the presence of the potential hydrogen bond.

  • The effect of the length of the etheric moiety of the benzene aromatic ring was also studied. Accordingly, replacing the methoxy group with ethoxy chain 4i did improve the inhibitory potency significantly (IC50 =  1.58 ± 2.76 μM) which was around sixfold more potent than reference drug kojic acid.

  • Biological evaluation of motifs at the para-position of the phenyl ring suggesting the importance of the hydrophobic character for the interaction with the enzyme. Compound 4e with the Br substituent on the para-position exhibits the promising activity with the IC50 values of 1.95 μM. Compounds 4b and 4c with OH or OMe group in the same position are slightly weaker inhibitors.

Kinetic study of tyrosinase inhibition

To gain further insight into the mechanism of action of this family of tyrosine-like compounds, a kinetic study was carried out with the most promising inhibitors of tyrosinase enzyme. Lineweaver–Burk plot was obtained for 4i the most potent inhibitor with L-DOPA as the substrate the data summarized in Table 2 and Fig. 3. The inhibition constants, Ki, and Vm for tyrosinase inhibitors were determined by fitting the kinetic data to a competitive, noncompetitive, or mixed inhibition model by nonlinear regression analysis using GraphPad Prism. As shown in Fig. 3, with increasing concentrations of compound 4i, the Km and Vm decreased. Therefore, this compound is a uncompetitive inhibitor for the tyrosinase enzyme.

Table 2 Kinetic parameters for the compounds 4i against mushroom tyrosinase inhibition assay
Full size table
Fig. 3
figure 3

Lineweaver–Burk plot for the inhibition of tyrosinase-catalyzed l-DOPA oxidation by 4i at 0, 10 and 25 µM

Full size image

Molecular docking analysis

Tyrosinase enzyme structure contains two H subunits with 392 residues and two L subunits with 150 residues. The H subunit of tyrosinase contains a binuclear copper site in which three histidine residues name His61, His85 and His94 interact with first copper ion and the second Cu ion coordinated with His259, His263, and His296. The most important factor involved in tyrosinase inhibition is trapping histidine amino acid coordinated with Cu ion which played an important role in the activity.

In order to gain insight into the interactions and binding mode of the synthesized compounds in the active site of tyrosinase enzyme, the molecular docking analysis was performed. The 3D coordinate of the tyrosinase (PDB ID: 2Y9X) in complex with tropolone was retrieved from Protein Data Bank (PDB) at http://www.rcsb.org/pdb/home/home.do. Before docking targeted protein and synthetic derivatives were prepared and the best pose with the lowest binding energy was selected for further analysis. Docking validation was done by extracting the structure of the co-crystallized ligand and re-docking it into the receptor (self-docking) with an RMSD of 2.49 Å.

The compound 4i showed excellent anti-tyrosinase activity with IC50 of 1.58  µM, due to the presence of O–CH2–CH3 as a bulky electron-donating group on the 3rd position and OH on the 4th position of the phenyl ring. This orientation of the 4i enables it to make a hydrogen bond of ethoxy moiety with His85 (Fig. 4). In this position, the 3-ethoxy-4-hydroxybenzylidene ring was well fitted in the active site through π-aryl interaction with Ala286 and Val283. The 4-OH of hydroxy benzylidene ring from two interactions with the imidazole group of His85 (2.03 Å) and His263 (2.7 Å). NH of hydrazine linker was involved in H-bond interactions with CO of the backbone of Gly281 (distance 2.70 Å) while the Nʹ atom of hydrazine linker formed H-bond interaction with Val283 (distance: 3.01 Å). The carbonyl moieties of 4i created additional hydrogen bond interaction with Val283 (distance: 2.23 Å). On the other side of the ligand, the plain structure of benzyl moiety contributes to making a staking interaction with Pro277. In this situation, the methoxy group binds to Arg268 through H-bound interaction. Detailed molecular docking studies confirmed the importance of hydrophobic and hydrogen bonds interactions between 4i as inhibitor and tyrosinase.

Fig. 4
figure 4

The binding mode of compound of 4i within mushroom tyrosinase (PDB ID: 2Y9X) active site. 4i is presented in orange. Only important residues for binding are shown. Hydrogen bonds interactions were depicted in green, van der Waals interaction were depicted in green, interaction with metal ions were depicted in the green line, π–π and π–aryl stacking interactions were depicted in pink

Full size image

Conclusion

The presence of phenolic structural features may help in the designing of more potent tyrosinase inhibitors. Novel 11 vaniline-benzylidenehydrazine hybrids were investigated as tyrosinase inhibitor. The results showed that four compounds have high tyrosinase inhibitory activities with IC50 values below positive control. Among them, 4i derivative showed the best antityrosinase activity (IC50  =  1.58 ± 2.76 µM), 6 times better in comparison with kojic acid (IC50  =  9.3 ± 1.27 µM) followed by 4e with IC50 of 1.95. Moreover, it is worth mentioning that 4i showed a competitive inhibition mode of action. Inspection of the chemical structures, it can be concluded that the tyrosinase inhibitory activity was related to the substituent groups at C3 and C4 positions of benzohydrazide moiety. The free OH group at para positions of the benzyl ring increased the hydrophilicity and H-bound interaction capability in this region which fulfills the minimum structural features of novel designed compounds. The SAR study by the modification of substituent revealed that optimum bulkiness at meta positions of the benzyl ring can also improve the inhibition potential of compounds. Docking simulation showed that the 4i illustrated a lot of interactions with the active site of tyrosinase. And the potential may be due to the formation of strong interactions with His85, His263 through copper ion and hydrogen bonds interaction with Arg268, Gly281 and Val283 as well as π-aryl and Van der Waals interactions with the amino acid residues located inside the active site.

The straightforward synthesis and high potency of newly designed tyrosine-like compounds 4a–k introduce them as attractive lead compounds towards the discovery of effective tyrosinase inhibitors.

Material and method

Chemistry

All reagents were reagent grade quality and obtained from Sigma-Aldrich (Prague, Czech Republic). The reaction process was monitored using thin layer chromatography on the glass-backed silica gel sheets (Silica Gel 60 GF254) and visualized under UV light (254 nm). Column chromatography was performed on silica gel (90–150 mm; Merck Chemical Inc.). 1H and 13C NMR spectra were determined by a Bruker FT-300 MHz spectrometer in DMSO-d6. All the chemical shifts were reported as (δ) values (ppm). Mass spectra were obtained on Agilent 7890A spectrometer at 70 eV. The infrared (IR) spectra were run as KBr disk on Perki-Elmer Spectrum RXI FTIR.

Procedure for the synthesis of methyl 4-hydroxy-3-methoxybenzoate (3)

Methyl 4-hydroxy-3-methoxybenzoate (1, 10 mmol) and hydrazine hydrate (2, 30 mmol) were added to 100 mL EtOH in the presence of catalytic amount of acetic acid. The mixture was refluxed for 24 h. The filtered residue was purified by recrystallization in ethanol. The residues was then washed three times with 5 mL cold ethanol. Finally, the solid was dried in a vacuum at 50  °C to give 3 without further purification. White solid, 93% yield. Melting point: 135.0 °C

General procedure for the synthesis of compounds 4a–k

Methyl 4-hydroxy-3-methoxybenzoate (3, 2 mmol) was then added into 20 mL 2-propanol as a solvent. To the resulting solution different selected aldehyde (2.2 mmol) were added. On completion of reaction (TLC) the precipitate were filtered and recrystallized from ethanol. Subsequently dried under reduced pressure to provide the (4a–i) product.

Synthesis of (E)-Nʹ-(2,4-dihydroxybenzylidene)-4-hydroxy-3-methoxybenzohydrazide (4a)

Compound 4a was prepared by the described procedure to afford pure yellow crystalline solid. Yield: 79%; Melting point: 243.0 °C; FT-IR (KBr): υ = 3524, 3420, 3164, 2875, 1640, 1613, 1259; 1HNMR (300 MHz, DMSO-d6, ppm): δH 11.42 (s, 1H, hydrazine-N–H), 11.37 (s, 1H, 2,4-dihydroxybenzylidene-N=CH), 11.06 (s, 1H, 2,4-dihydroxybenzylidene-OH), 10.18 (s, 1H, 2,4-dihydroxybenzylidene-OH), 9.93 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 8.19 (m, 2H, 4-hydroxy-3-methoxybenzohydrazide-C2,6-H), 8.13 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-C5-H), 7.39 (d, J = 6.0 Hz, 1H, 2,4-dihydroxybenzylidene-C3-H), 7.26 (d, J = 6.0 Hz, 2H, 2,4-dihydroxybenzylidene-C5,6-H), 3.83 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO d6, 125 MHz): δc (ppm) = 163.9, 159.7, 150.4, 147.7, 129.2, 125.9, 124.8, 121.6, 121.3, 120.0, 116.2, 115.4, 111.9, 109.7, 56.2; MS (EI) m/z (%): 302 (M+, 5), 194 (40), 151 (30), 135 (100), 123 (18), 60 (35), 43 (30).

Synthesis of (E)-4-hydroxy-Nʹ-(4-hydroxybenzylidene)-3-methoxybenzohydrazide (4b)

Golden powder; Yield: 75%; Melting point: 256 °C; FT-IR (KBr): υ = 3521, 3405, 3024, 2870, 1646, 1605, 1269; 1HNMR (300 MHz, DMSO-d6, ppm): δH 11.45 (s, 1H, hydrazine-N-H), 9.92 (s, 1H, 4-hydroxybenzylidene-N=CH), 9.71 (s, 1H, 4-hydroxybenzylidene-OH), 8.34 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 7.48 (m, 2H, 4-hydroxybenzylidene-C2,6-H), 7.44 (m, 2H, 4-hydroxy-3-methoxy-C2,6-H), 6.86 (m, 3H, 4-hydroxy-3-methoxy benzohydrazide-C5-H and 4-hydroxybenzylidene-C3,5-H), 3.85 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO d6, 125 MHz): δc (ppm) = 163.9, 159.7, 150.4, 147.7, 129.2, 125.9, 124.8, 121.6, 121.3, 120.0, 116.2, 115.4, 111.9, 109.7, 56.2; MS (EI) m/z (%): 286 (M+, 10), 167 (40), 151 (100), 136 (11), 123 (20), 108 (10), 77 (112).

Synthesis of (E)-4-hydroxy-3-methoxy-Nʹ-(4-methoxybenzylidene)benzohydrazide (4c)

White powder; Yield: 76%; Melting point: 110.0 °C; FT-IR (KBr): υ = 3523, 3393, 3016, 2841, 1509, 1364, 1209. 1HNMR (300 MHz, DMSO-d6, ppm): δH 11.55 (s, 1H, hydrazine-N–H), 9.76 (s, 1H, 4-methoxybenzylidene-N=CH), 8.40 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 7.67 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-C2-H), 7.50 (brs, 1H, 4-hydroxy-3-methoxy benzohydrazide-C6-H), 7.46 (d, J = 6.0 Hz, 2H, 4-methoxybenzylidene-C2,6-H), 7.01 (brs, 1H, 4-hydroxy-3-methoxy benzohydrazide-C5-H), 6.89 (d, J = 6.0 Hz, 2H, 4-methoxybenzylidene-C3,5-H), 3.85 (s, 3H, 4-hydroxy-3-methoxybenzohydrazide-OCH3), 3.80 (s, 3H, 4-methoxybenzylidene-OCH3); 13CNMR (DMSO-d6, 125 MHz): δc (ppm) = 163.1, 161.1, 150.5, 149.7, 148.4, 138.3, 129.0, 127.5, 124.7, 121.7, 118.4, 115.4, 114.8, 112.0, 56.1, 55.7; MS (EI) m/z (%): 300 (M+, 50), 268 (10), 168 (85), 151 (100), 123 (15), 105 (12), 77 (10).

Synthesis of (E)-Nʹ-(3,4-dimethoxybenzylidene)-4-hydroxy-3-methoxy benzohydrazide (4d)

White powder; Yield: 75%; Melting point: 231.0 °C; FT-IR (KBr): υ = 3313, 3009, 2964, 2838, 1639, 1597, 1364; 1HNMR (300 MHz, DMSO-d6, ppm): δH 11.58 (s, 1H, hydrazine-N–H), 9.74 (s, 1H, dimethoxybenzylidene-N=CH), 8.39 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 7.50 (s, 1H, 3,4-dimethoxybenzylidene-C2-H), 7.39 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-C2-H), 7.18 (brs, 1H, 4-hydroxy-3-methoxy benzohydrazide-C6-H), 7.02 (m, 2H, 3,4-dimethoxybenzylidene-C6-H and 4-hydroxy-3-methoxy benzohydrazide-C5-H), 6.89 (d, J = 6.0 Hz, 1H, 3,4-dimethoxybenzylidene-C5-H), 3.85 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3), 3.81 (s, 6H, 3,4-dimethoxybenzylidene-2(OCH3)); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 163.1, 151.7, 150.5, 149.5, 147.7, 127.6, 124.7, 122.2, 122.0, 121.7, 115.4, 112.0, 111.9, 108.58, 56.2, 56.0, 55.9; MS (EI) m/z (%): 330 (M+, 18), 207 (5), 180 (20), 167 (40), 151 (100), 123 (20), 77 (10), 65 (12).

Synthesis of (E)-Nʹ-(4-bromobenzylidene)-4-hydroxy-3-methoxybenzohydrazide (4e)

Yellow powder; Yield: 91%; Melting point: 115.0 °C; FT-IR (KBr): υ = 3331, 3046, 2929, 2839, 1654, 1593, 1438; 1HNMR (300 MHz, DMSO-d6,ppm): δH 12.46 (s, 1H, hydrazine-N–H), 11.85 (s, 1H, 4-bromobenzylidene-N=CH), 8.43 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 7.90 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-C2-H), 7.68 (m, 4H, 4-bromobenzylidene C2,3,5,6-H), 6.53 (brs, 2H, 4-hydroxy-3-methoxy benzohydrazide-C5,6-H), 3.80 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 164.8, 163.4, 161.7, 150.0, 149.9, 146.5, 132.9, 131.3, 129.0, 128.5, 122.9, 106.9, 105.9, 100.8, 54.9; MS (EI) m/z (%): 348 (M+2, 6), 348 (M, 6), 167 (40), 151 (100), 123 (20), 89 (12).

Synthesis of (E)-4-hydroxy-3-methoxy-Nʹ-(4-nitrobenzylidene)benzohydrazide (4f)

Yellow powder; Yield: 81%; Melting point: 195.0 °C; FT-IR (KBr): υ = 3093, 2970, 2927, 2840, 1643, 1621, 1523, 1477; 1HNMR (300 MHz, DMSO-d6, ppm): δH 12.22 (s, 1H, hydrazine-N-H), 11.98 (s, 1H, 4-nitrobenzylidene-N=CH), 8.55 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 8.30 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-C2-H), 7.99 (m, 2H, 4-nitrobenzylidene-C3,5-H), 7.91 (m, 2H, 4-nitrobenzylidene-C2,6-H), 6.57 (m, 2H, 4-hydroxy-3-methoxy-benzohydrazide-C5,6-H), 3.80 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 163.5, 163.5, 162.5, 161.5, 147.4, 145.1, 144.9, 140.0, 129.3, 127.5, 123.5, 106.9, 106.0, 101.0, 54.9; MS (EI) m/z (%): 315 (M+, 10), 167 (20), 151 (100), 135 (10), 123 (18), 108 (18), 59 (24).

Synthesis of (E)-4-hydroxy-Nʹ-(4-hydroxy-3,5-dimethoxybenzylidene)-3-methoxy benzohydrazide (4g)

White powder; Yield: 85%, Melting point:151 °C; FT-IR (KBr): υ = 3521, 3434, 3227, 2965, 1643, 1558, 1426; 1HNMR (300 MHz, DMSO-d6, ppm): δH 11.52 (s, 1H, hydrazine-N–H), 9.73 (s, 1H, 4-hydroxy-3,5-dimethoxybenzylidene-N=CH), 8.91 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 8.34 (s, 1H, 4-hydroxy-3,5-dimethoxybenzylidene-OH), 7.46 (s, 1H, 4-hydroxy-3-methoxybenzohydrazide–C2–H), 7.44 (s, 1H, 4-hydroxy-3-methoxybenzohydrazide–C6–H), 6.89 (brs, 2H, 4-hydroxy-3,5-dimethoxybenzylidene –C2,6–H), 6.87 (brs, 1H, 4-hydroxy-3-methoxybenzohydrazide–C5–H), 3.85 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3), 3.82 (s, 6H, 4-hydroxy-3,5-dimethoxybenzylidene-2(OCH3)); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 163.0, 157.7, 150.5, 148.6, 148.2, 147.7, 138.3, 125.2, 124.8, 121.7, 115.4, 112.1, 112.0, 104.9, 56.5, 56.4, 56.2; MS (EI) m/z (%): 346 (M+, 15), 196 (10), 179 (15), 167 (30), 151 (100), 135 (10), 123 (20), 108 (10).

Synthesis of (E)-4-hydroxy-Nʹ-(3-hydroxy-4-methoxybenzylidene)-3-methoxybenzohydrazide (4h)

White powder; Yield: 90%; Melting point: 98.0 °C; FT-IR (KBr): υ = 3246, 3087, 3227, 2838, 1598, 1356, 1212; 1HNMR (300 MHz, DMSO-d6, ppm): δH 11.49 (s, 1H, hydrazine-N–H), 9.74 (s, 1H, 3-hydroxy-4-methoxybenzylidene-N=CH), 9.35 (s, 1H, OH), 8.30 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 7.49 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-C2–H), 7.45 (d, J = 6.0 Hz, 1H, 4-hydroxy-3-methoxy benzohydrazide-C6–H), 7.28 (s, 1H, 3-hydroxy-4-methoxybenzylidene-C2–H), 7.05 (d, J = 6.0 Hz, 1H, 4-hydroxy-3-methoxy benzohydrazide-C5–H), 6.97 (d, J = 6.0 Hz, 1H, 3-hydroxy-4-methoxybenzylidene-C6–H), 6.88 (d, J = 6.0 Hz, 1H, 3-hydroxy-4-methoxybenzylidene-C5–H), 3.85 (brs, 3H, 3-hydroxy-4-methoxybenzylidene-OCH3), 3.81 (brs, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 163.0, 150.5, 150.1, 147.7, 147.6, 147.3, 127.8, 124.8, 121.7, 120.6, 115.4, 112.7, 112.3, 112.0, 56.2, 56.0; MS (EI) m/z (%): 316 (M+, 12), 180 (10), 167 (40), 151 (100), 134 (15), 123 (20), 106 (10).

Synthesis of (E)-Nʹ-(3-ethoxy-4-hydroxybenzylidene)-4-hydroxy-3-methoxybenzohydrazide (4i)

White powder; Yield: 76%; Melting point: 114.0 °C; FT-IR (KBr): υ = 3424, 3301, 3080, 2975, 1504, 1371, 1271; 1HNMR (300 MHz DMSO-d6, ppm): δH 12.63 (s, 1H, hydrazine-N–H), 11.65 (s, 1H, 3-ethoxy-4-hydroxybenzylidene-N=CH), 9.55 (s, 1H, 3-ethoxy-4-hydroxybenzylidene-OH), 8.34 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 7.91 (m, 2H, 4-hydroxy-3-methoxy benzohydrazide–C2–H and 3-ethoxy-4-hydroxybenzylidene-C2–H), 7.31 (brs, 1H, 4-hydroxy-3-methoxy benzohydrazide–C6–H), 7.11 (brs, 1H, 3-ethoxy-4-hydroxybenzylidene-C6–H), 6.87 (s, 1H, 3-ethoxy-4-hydroxybenzylidene-C5–H), 6.51 (brs, 1H, 3-ethoxy-4-hydroxybenzylidene-C5–H), 4.07 (q, J = 6 Hz, 2H, 3-ethoxy-4-hydroxybenzylidene-OCH2CH3), 3.80 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3), 1.37 (t, J = 6.0 Hz, 3H, 3-ethoxy-4-hydroxybenzylidene-OCH2CH3); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 164.6, 163.3, 161.8, 148.9, 146.6, 128.7, 124.9, 121.7, 115.0, 109.7, 106.8, 105.8, 100.7, 100.4, 63.3, 55.5, 54.9; MS (EI) m/z (%): 328 (M+, 15), 222 (10), 207 (5), 163 (35), 151 (25), 135 (100), 123 (10), 105 (15).

Synthesis of (E)-4-hydroxy-3-methoxy-Nʹ-(2-nitrobenzylidene)benzohydrazide (4j)

White powder; Yield: 78%, Melting point: 151 °C; FT-IR (KBr): υ = 3093, 2970, 2970, 2840, 1643, 1630, 1523, 1477; 1HNMR (300 MHz DMSO-d6, ppm): δH 12.22 (s, 1H, hydrazine-N–H), 11.98 (s, 1H, 2-nitrobenzylidene-N=CH), 8.55 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 8.31 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide–C2–H), 7.91 (m, 4H, 2-nitrobenzylidene–C3,4,5,6–H), 6.51 (brs, 2H, 4-hydroxy-3-methoxy benzohydrazide–C5,6–H), 3.81 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 164.8, 163.5, 162.5, 161.5, 147.4, 145.1, 144.9, 139.9, 129.3, 127.5, 123.5, 106.9, 105.9, 100.8, 54.9; MS (EI) m/z (%): 315 (M+, 15), 167 (10), 151 (100), 135 (10), 107 (10), 95 (8).

Synthesis of (E)-4-hydroxy-3-methoxy-Nʹ-(3-nitrobenzylidene)benzohydrazide (4k)

White powder; Yield: 88%, Melting point:151 °C; FT-IR (KBr): υ = 3091, 2970, 2970, 2840, 1643, 1630, 1523, 1477; 1HNMR (300 MHz DMSO-d6, ppm): δH 11.62 (s, 1H, hydrazine-N–H), 11.47 (s, 1H, 3-nitro benzylidene-N=CH), 8.48 (s, 1H, 4-hydroxy-3-methoxy benzohydrazide-OH), 8.42 (s, 1H, 3-nitrobenzylidene–C2–H), 8.22 (m, 2H, 4-hydroxy-3-methoxy benzohydrazide–C2–H and 3-nitrobenzylidene–C4–H), 8.08 (m, 2H, 3-nitrobenzylidene–C5,6–H), 7.71 (m, 2H, 4-hydroxy-3-methoxy benzohydrazide-C5,6-H), 3.37 (s, 3H, 4-hydroxy-3-methoxy benzohydrazide-OCH3); 13C NMR (DMSO-d6, 125 MHz): δc (ppm) = 171.6, 165.4, 147.6, 142.6, 139.6, 135.6, 132.6, 132.1, 129.8, 123.5, 123.3, 120.3, 120.1, 21.1, 19.7; MS (EI) m/z (%):315 (M+, 15), 167 (10), 151 (100), 135 (10), 107 (10), 95 (8).

Mushroom tyrosinase inhibition assay

All test samples were first dissolved in DMSO at 50 mM and diluted to the required concentrations. First, 10 ml of tyrosinase (0.5 mg ml) was mixed with 160 μl of 50 mM phosphate buffer (pH = 6.8) in 96-well microplates and then 10 μl of different concentration of the test sample was added. After 20 min incubation at 28 °C, 20 ml of L-Dopa solution (0.5 mM) was added to the phosphate buffer and the enzymatic activity was monitored by observing dopa quinone formation at 475 nm. DMSO without test compounds and kojic acid were used as the control and positive control respectively. The tyrosinase activity without inhibitor was defined as 100%. Each concentration was analyzed in three independent experiments run in triplicate. The inhibitory activity of the tested compounds was expressed as the concentration that inhibited 50% of the enzyme activity (IC50).

Determining the inhibition type

To determine the inhibition kinetics of vaniline-benzylidenehydrazine a series of experiments were performed. Different concentrations of the 4i (0, 10 and 25 µM) was chosen to get a series of straight lines. Pre-incubation and measurement time were the same as discussed in mushroom tyrosinase inhibition assay protocol. The maximal velocity (Vmax) and the Michaelis constant (Km) of the tyrosinase activity were determined by the Line weaver Burk plot at various concentrations of L-DOPA (0.25, 0.5, 0.75 and 1 mM) as a substrate. The inhibition type of the enzyme was assayed by Line weaver Burk plots of inverse of velocities (1/V) versus inverse of substrate concentrations 1/[S] mM.

Molecular docking study

The X-ray crystal structure of tyrosinase (PDB code: 2Y9X) containing tropolone as the innate ligand in the binding site were obtained from protein data bank (http://www.rcsb.org). Water molecules and cognate ligand were excluded from 2Y9X, hydrogens were added, nonpolar hydrogens were merged and Gasteiger charges were calculated for protein. 3D structures of ligands were sketched and optimized (by molecular mechanics, MM+ and AM1, methods) using Hyperchem software. The PDBQT files were created by adding charges and defining the degree of torsions. The three-dimensional grids 60 * 60 * 60 (x, y, z) were created with a grid spacing of 0.375 Å and the cubic grids were centered on the binding site of native ligand comprise copper metal ions [23]. Lamarckian genetic algorithm (LGA) was applied to model the interaction/binding between then ligand and the tyrosinase active site. For Lamarckian GA, 27,000. The other parameters were left at program default values. The final binding mode described in the manuscript was selected taking into account the best-ranked scoring functions.