Abstract
We study \(W^+W^-\) and Zh final sstates at future linear \(e^+e^-\) colliders; designing analyses specific to the various final state polarizations allows us to target specific beyond the Standard Model (BSM) effects, parametrized in the form of dimension-6 operators. We find that CLIC can access effects roughly an order of magnitude smaller than HL-LHC or ILC, and two orders of magnitude smaller than LEP. These results are interpreted in the context of well-motivated BSM scenarios–at weak and strong coupling–where we expect correlated effects in Drell–Yann processes. The latter turn out to have better discovery potential, although the diboson processes provide additional discriminating power, potentially furnishing a way to measure the spin and coupling of BSM states.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Motivation
Standard Model (SM) precision tests are at the core of present and future collider programs. While interesting as confirmation of our unprecedented control of SM computations, they serve an exciting additional purpose: a way to search for new structure lurking beyond the SM (BSM). Indeed, heavy dynamics–beyond the direct reach of colliders–leave an imprint on lower energy processes, in the form of deformations of SM interactions. These can be described by an Effective Field Theory (EFT), which parametrises the most general deviations from the SM and, at the same time, captures the effects of general, heavy BSM dynamics.
The leading such effects, associated with dimension-6 operators in the effective Lagrangian, in general behave schematically as \(\sigma \sim \sigma _{SM}(1+ E^2/\varLambda ^2)\), with E a characteristic energy scale of the process and \(\varLambda \) the physical scale associated with the EFT operator. This suggests two modes of exploration: (i) on a SM resonance–such as the Z-pole studied at LEP1–where \(\sigma _{SM}\) is maximal, statistical uncertainty the smallest, and the experiment becomes sensitive to tiny departures from the SM, or (ii) at high-energy, where the BSM effect is larger and less precision is needed to access effects of a given size. In this article we focus on experiments of the latter type; in particular, we study non-resonant \(2\rightarrow 2\) processes, which are the simplest processes, with the largest cross sections, with access to the high-energy regime. Processes with more particles can be interesting to test operators with more legs, such as those that modify Higgs couplings [1].
Particularly interesting for the BSM discovery potential they offer are diboson \(VV^\prime \) and Vh (\(V^{(\prime )}=W,Z\)) final states. Indeed, new dynamics in the Higgs sector–such as Higgs compositeness [2,3,4,5,6]– alter the behaviour of Vh processes [7,8,9] and, according to the equivalence theorem, also enter in processes with longitudinal \(VV^\prime \) [10,11,12]. BSM in the gauge sector [13, 14] instead affects \(VV^\prime \) processes with transverse polarisations. Finally, light fermion substructure, as implied in models of fermion compositeness [15, 16], can modify the initial light quark or lepton current, although this option seems to be disfavoured by tests of flavour and CP violation [17].
Diboson processes happen to be very interesting also for the experimental challenges they pose. Processes involving the transverse polarizations suffer from suppressed SM-BSM interference; this is because the tree-level, high-energy diboson helicity structure in the SM (\(\pm ,\mp \)) differs from (\(\pm ,\pm \)) implied by the leading BSM effects [18]. However, by utilizing exclusive information in the form of differential distributions of the azimuthal angles of the V boson decay planes, dedicated experiments can bear the interference information and overcome this problem [19,20,21].
When new physics is in the longitudinal polarizations, BSM searches as precision tests are also challenging.In the SM, the unpolarized cross section is dominated by the transverse-transverse components while the longitudinals are small. Therefore, even though the SM and BSM do interfere, the dominant SM contribution acts as an irreducible background, thereby reducing the sensitivity of the experiment. As we will see, beam polarization can play a crucial role in this context as it can substantially reduce the transverse component.
Lepton colliders offer an ideal environment to study these dedicated experiments [22,23,24,25,26,27]: beside providing an ideal context for precision studies, these machines also present a number of qualitative differences with respect to hadron colliders, such as the possibility of beam polarisation and, in principle, the knowledge of the collision center-of-mass energy. In this article we discuss and compare ILC and CLIC capabilities, which offer the best prospects to explore the high-energy regime. We establish the added value of dedicated BSM searches for EFT dimension-6 operators, and discuss the reach of different experiments, at different colliders. In particular, we compare VV against Vh studies when new physics enters in the Higgs/longitudinals sectors, and put these in perspective with precise Z-pole measurements at LEP and future high-intensity circular-collider facilities, which are capable of testing the same physics with high precision. We will see that Vh-processes lead to the furthest reach on BSM, both at ILC and CLIC.
In Sect. 2 we discuss different weakly and strongly coupled BSM scenarios that can induce energy-growing effects in diboson processes and identify interesting patterns of EFT Wilson coefficients stemming from well-motivated microscopic assumptions. In Sect. 3, based on our knowledge of SM and BSM interplay, we design dedicated collider analyses for the transverse \(W^+_TW^-_T\) and longitudinal \(W^+_LW^-_L\) final states, as well as associated Higgs production Zh. We discuss our results in Sect. 4.
Analyses of this type have already been carried out in the context of the LHC, see e.g. Refs. [8, 20, 28]. Preliminary versions of parts of this analysis can be found in the CLIC Potential for New Physics report [29] and in [30]. Moreover, Ref. [31], appeared recently, has results which slightly overlap with our analysis of longitudinal polarizations.
2 BSM perspective
We are interested in the leading BSM effects, as captured by the most relevant BSM operators in an EFT parametrization
with \(\mathscr {O}_i\) dimension-6 operators [6, 32, 33]. We will work in the SILH basis of Ref. [6] which captures efficiently the effects of UV universal theories, where the new dynamics couples principally to the SM bosons. Different microscopic dynamics in the UV (at \(E > rsim \varLambda \)) translate at low energy into different patterns for the coefficients; in what follows we will describe such patterns in the transverse and longitudinal sectors.
Transverse BSM. Heavy new physics that couples to the electroweak gauge interactions, i.e. heavy particles charged under \(SU(2)_L\times U(1)_Y\), at low-energy induce effects that can be captured byFootnote 1
The first two operators in Eq. (2) modify the \(W^\pm \) and Z boson propagators, where they correspond to the electroweak oblique parameters Y and W [35]; their effects can be searched for very efficiently in Drell–Yann (DY) processes [28, 35]. \(\mathcal{O}_{3W}\) enters, for instance, in processes with transverse diboson final states at colliders. In this context, \(\mathcal{O}_{3W}\) is often presented as the anomalous trilinear gauge coupling (TGC), associated with the parameters \(\lambda _{\gamma },\lambda _{Z}\) of Ref. [36], to which it translates as \( \lambda _{Z}=\lambda _\gamma =- c_{3W}m_W^2/\varLambda ^2\) (for concrete reference, \(\lambda _{\gamma } = -0.006c_{3W}(1 \text { TeV}/\varLambda )^2\)). Since \(W=(m_W/\varLambda )^2c_{2W}\) [35], at leading order,
Different BSM scenarios are characterized by different relative importances of \(\mathcal{O}_{2W,2B}\) versus \(\mathcal{O}_{3W}\). We focus here on \(\mathcal{O}_{2W,3W}\) that are typically generated together. When the BSM physics is weakly coupled, we have a UV Lagrangian from which we can compute the Wilson coefficients directly. This weak coupling assumption on the microphysics implies that we can restrict attention to renormalizable interactions in the UV Lagrangian. In this case, \(\mathscr {O}_{3W}\) can only be generated at one-loop or beyond [37, 38].Footnote 2 \(\mathscr {O}_{2W}\) also typically gets generated starting at 1-loop, unless heavy particles couple linearly to the \(SU(2)_L\) current \(J_{W,\mu }^a\) [6, 37], in which case it can be generated at tree-level. Lorentz invariance, gauge invariance, and linearity then imply the particle must be a massive vector in the adjoint representation of \(SU(2)_L\). Thus, unless the microphysics contains an EW triplet vector, \(\mathscr {O}_{2W}\) is generated at one-loop or beyond
The one-loop contribution to \(\mathscr {O}_{2W,3W}\) depends on the heavy particle’s mass, spin, and EW charge; in particular, it is independent of coupling constants in the UV Lagrangian while its dependence on the coupling g is fixed by gauge invariance. Moreover, each particle separately generates these operators, \(C_{2W,3W} = \sum _i C_{2W,3W}^i\) where the sum is over the BSM particles and we define \(C_{2W,3W}=c_{2W,3W}/\varLambda ^2\). The contributions to \(C_{2W,3W}^i\) from a particle of mass \(M_i\) and in the \(R_i\)th representation of \(SU(2)_L\) are [14]
where \(\mu (R_i)\) is the Dynkin index, \(\text {tr}_{R_i}(T^aT^b) = \mu (R_i)\delta ^{ab}\), and \(a_{2W,3W}\) are constants which depend on the spin of the particle, as shown in Table 1. Interestingly, the ratio \(C_{2W}^i/C_{3W}^i\) only depends on the spin of the particle, and this value varies wildly from \(+1\) for a scalar to \(-37/3\approx -12\) for a vector. As we discuss in detail in Sect. 4, this implies that the ratio \(C_{2W}/C_{3W}\) (equivalently, \(W/\lambda _{\gamma }\)) is a potentially excellent indicator of the spin of the lightest BSM state that generates the operators.
One can massage the results of [14] to re-express this ratio as
In this expression, \(N^i_{\text {dof}}\) is the number of physical real degrees of freedom of the ith particle (respectively, \(N_{\text {dof}} = 1\), 4, and 3 for a real scalar, Dirac fermion, and a massive vector), while \(k^i(j_1,j_2)\) is the Dynkin index for a field in the \((j_1,j_2)\)th representation of SO(3, 1).Footnote 3 To arrive at this equation, one needs to sum over contributions from all fields used to describe the particle; in particular, for the massive vector, the contributions of Goldstone fields (describing the longitudinal mode) and ghost fields (to cancel unphysical polarizations) are accounted for. By direct computation we know the above holds for scalars, fermions, and vectors; it would be interesting to understand if it extends to massive higher spin particles.Footnote 4
Our discussion has focused on how the ratio \(C_{2W}/C_{3W}\) encodes valuable kinematic information about the spin. But what of the overall size of these coefficients? From Eq. (4), we see these coefficients are proportional to \(\mu (R)\), which is the non-abelian analogue of \(Q^2\) (roughly, it’s the sum of \(Q^2\) for each state in the representation). For the spin j representation of SU(2),
which scales as \(2j^3/3\) at large j. The possibility of a large \(\mu (R)\) to compensate for the loop suppression factors in Eq. (4) is important in the discussion of the validity of our EFT parametrization, see e.g. Ref. [40]. Indeed, at \(E\sim 2M\) the heavy particles can be produced on shell and the EFT parametrization collapses. From Eq. (4) we see that at that energy, the operators \(\mathscr {O}_{2W}\) and \(\mathscr {O}_{3W}\) can produce at most a relative effect \(C E^2\sim (10^{-3}\div 10^{-4}) \mu (R) \) with respect to the SM, corresponding to a very precise relative measurement for small \(\mu (R)\). Larger \(SU(2)_L\) representations could instead potentially compensate mass scales beyond direct collider production.
This problem, which is a showstopper for hadron collider searches of these effects, has pushed the development of scenarios where the transverse polarizations can be inherently strongly coupled, wherein Eq. (4) no longer applies. In addition to the usual monopole coupling g appearing in the covariant derivative, the transverse polarisations in these scenarios have another coupling \(g_*\) characterising dipole- and multipole-type interactions [13]. The latter dominate at high-energy where they are parametrically enhanced by \(g_*\), resulting in the following estimate for the Wilson coefficients,
Now \(c_{3W}\) can be larger than one, and even an experiment with O(1) resolution can test the multipolar interaction hypothesis consistently.
Longitudinals. Concerning new physics in the Longitudinals/Higgs sector, one can identify a large number of operators that potentially contribute. For instance, in the SILH basis, the most important energy-growing effects that enter in diboson processes are captured by
These modify the Longitudinals’ and Higgs’ sectors due to the presence of H in the operators, as H contains the physical Higgs h as well as the Goldstone fields that become the longitudinal polarizations. In perturbative models of spin\(\le 1\) coupled with strength \(g_*\), \(c_{W,B}\) can arise at tree-level, while \(c_{HW,HB}\) arise at loop-level [6, 37, 41]:
As discussed at length in Refs. [10, 12], in the high-energy limit of \({\bar{\psi }} \psi \rightarrow V_LV^\prime _L\) processes, fixing the initial state polarization of the fermions determines the unique combination of operators in Eq. (8) that contribute to the process. This further implies that, in the high-energy regime (i.e. the massless limit), these processes do not distinguish between effects that modify the propagator and effects that modify vertices. For the initial state polarizations \({\bar{\psi }}_R \psi _L\) and \({\bar{\psi }}_L\psi _R\) always involve \(\mathscr {O}_W\) and \(\mathscr {O}_B\). Considering this, together with the fact that these operators can be generated at tree-level, in what follows we will focus our attention on \(\mathscr {O}_W\) and \(\mathscr {O}_B\).
3 Collider reach
3.1 Transverse \(e^+e^-\rightarrow W_T^+W_T^-\)
BSM effects in amplitudes with transverse \(W_T^+W_T^-\) final states are difficult to test due to small interference between SM and BSM amplitudes. As we will see, however, an understanding of angular distributions in the W decay products provides a way of digging out the BSM signal.
\(\mathcal{O}_{3W}\) produces, at tree-level and at high-energy, dominantly \(++\) or \(--\) helicities in the final states, with amplitudes
where \(\varTheta \) is the polar angle, corresponding to the angle between the incoming electron and the outgoing \(W^-\), \(\sqrt{s}\) the center-of-mass energy, and the subscripts L or R denote the helicity of the incoming electrons, while the supscripts ± the helicity of the outgoing \(W^+\) and \(W^-\). In inclusive \(2\rightarrow 2\) scattering, the BSM amplitudes in Eq. (10) do not interfere with the SM amplitude \(\mathcal{A}_{SM}\), which is dominated at high-energy by the \(+-\) and \(-+\) helicities with amplitudes
Non-interference arises because the two bosons have different helicities and then they are quantum mechanically different. However, W-bosons are massive and they decay on-shell into two fermions, whose helicity is fixed by the coupling structure between the W and the fermions, and that is the same in SM and BSM. Therefore, in the amplitudes for \(e^+e^-\rightarrow W^+W^-\rightarrow 4\psi \) interference can occur, and, more precisely, it is shown [19] to be proportional to a function of the azimuthal angles \(\varphi ^+\) and \(\varphi ^-\) of the decay planes of the fermion/anti-fermion originating from the \(W^+\) and \(W^-\) respectively.
In this note we focus on a single-differential distribution and study the azimuthal distribution of the decay products of one of the two W’s. We remain inclusive about the other W, which can then be thought of as a state of well defined helicity. The interference term between the transverse-transverse amplitudes reads [19]
where the angle \(\varphi \) is measured making reference to the outgoing fermion of positive helicity (\(\varphi = \varphi ^+\) or \(\varphi ^-\), depending on whether \(W^+\) or \(W^-\) is chosen). Consistently, the interference Eq. (12) vanishes when integrated over, reproducing non-interference results.
From the form of these parton-level amplitudes Eqs. (10, 11), we deduce the following important aspects. (i) The backward region \(\cos \varTheta \approx -1\) is not favourable, as SM and BSM both vanish. (ii) The BSM amplitude has its maximum in the central region \(\cos \varTheta \approx 0\), but the SM switches from being dominated by the \(+-\) to being dominated by \(-+\), which has opposite sign: a \(\cos \varTheta \)-inclusive analysis has therefore the potential to partially cancel the interference term. (iii) The forward region \(\cos \varTheta \approx +1\) has a large SM occupations because of the t-channel neutrino pole, while BSM vanishes; interference is in fact finite and the signal over square-root of background increases rapidly \(\sim \varTheta ^{3/2}\) as we approach the central region.
The angle \(\varphi \) is measured with respect to the outgoing fermion of positive helicity, which is indistinguishable from a fermion of opposite helicity when the W decays hadronically, implying an ambiguityFootnote 5
Fortunately, distributions of the form Eq. (12) are insensitive to this ambiguity. The fully hadronic channel makes it also impossible to distinguish \(W^+\) and the \(W^-\), leading to an extra
ambiguity. This is equivalent to \(\cos \varTheta \rightarrow -\cos \varTheta \) under which, see point (ii) above, the interference term is odd close to \(\cos \varTheta \approx 0\). Therefore, in the very central region, the interference cancels in the fully hadronic channel.
For leptonically decaying W-bosons in the semileptonic channel \(\nu l^+{\bar{q}} q \), an angle could be defined with reference to the charged lepton, and this could be related to \(\varphi \). Yet, a decay plane can be established only with knowledge of the neutrino momentum, which can be reconstructed from missing energy and the W-decay kinematics, up to a twofold ambiguity, where the two solutions differ by their longitudinal momentum. At lepton colliders –despite the fixed total center-of-mass energy–initial state radiation (ISR) and beamstrahlung smear the initial energy spectrum, making the leptonic-collider case similar in practice to the LHC: the initial momentum on the beam-pipe direction is not known with sufficient precision. This implies an approximate ambiguity
However, this doesn’t affect the distribution Eq. (12) (in constrast, CP odd effects from \(W^{a\, \nu }_{\mu }W^{b}_{\nu \rho }{\widetilde{W}}^{c\, \rho \mu }\) give distributions \(\propto \sin 2\varphi \), which are odd under Eq. (15) and therefore erased by this ambiguity).
Selection Cuts. This understanding guides us in designing the experimental analysis. We divide \(\varphi \in [-\pi ,\pi ]\) in 10 bins. For the semileptonic channel we can choose \(\varphi \) to be the angle defined by the leptonically decaying W; the results do not change if we choose the hadronically decaying one. We focus on the channel \(W^-\rightarrow \mu ^-{{\bar{\nu }}}\) and multiply by a factor four the luminosity to account for \(l=\mu ^+\) and \(l=e^\pm \).Footnote 6 Finally, we separate the polar angle as \(\cos \varTheta \in [-1,-0.5,0,0.5,1]\) for the semileptonic channel. For the fully hadronic channel, following point (ii) and the ambiguity Eq. (14), we instead single out the very central region where interference is suppressed, \(\cos \varTheta \in [-1,-0.5,-0.2,0,0.2,0.5,1]\). Furthermore, for this channel, we define \(\varphi \) by selecting one of the two fermions randomly and define \(\varTheta \) by selecting randomly one of the two W’s, reflecting the ambiguity Eqs. (13) and (14).
The broad energy-spectrum created by ISR and beamstrahlung, convoluted with the fact that the cross section increases towards smaller energy, implies that a good fraction of events has energy smaller than the nominal collider energy \(E^{nom}\). This complicates the azimuthal-angle analysis since, at small energies, mixed helicity amplitudes \(\pm 0\), \(0\pm \) appear in the SM and interfere with \(\pm \mp \), generating non-trivial azimuthal distributions that make it difficult to recognise distribution of the form Eq. (12). For this reason, we perform selection cuts on the energy of the events, as shown in the last column of Table 2.
Analysis. We generate events using Whizard [42] according to the energy/luminosity scenarios in Table 2, from [29], and take into account detector effects by smearing the energy of jets on a normal distribution with a 4% resolution. We also require the polar angle for jets and leptons to fulfil \(10^{\circ }<\varTheta _{l,j}<170^{\circ }\) and \(-0.95<\cos \varTheta <0.95\) for the reconstructed Ws to avoid the forward region; in addition we impose \(E>10\) GeV for all particles and \(M_{jj}>10\) GeV, to avoid events from virtual photons in the fully hadronic case. We then compare the different energy stages at CLIC and ILC, and scenarios with optimistic 1% and pessimistic 3% systematic uncertainty \(\delta _{syst}\) in all bins, where we also include a 50% signal acceptance. The results are summarized in Table 3, and in the left panel of Fig. 2. We compare analyses with binned \(\varphi \) against unbinned analyses where all other cuts are identical. As expected, in both the channels, the analysis binned in the azimuthal angle, which takes into account the interference effects, gives additional sensitivity; moreover, we verify that the sensitivity is dominated by the central bins in \(\varTheta \), as expected from our discussion of points (i) and (iii) above. Our results also confirm the rough \(E^2\) sensitivity improvement at high-energy. The results for the fully hadronic analysis and the semileptonic one are almost identical; this is due to the larger luminosity of the former being compensated by the ambiguity in the polar distribution, as discussed in point (ii).
In order to give the reader an idea of what is the impact of beam-polarization on the rate of the considered processes, in Fig. 1 we display the CM-energy dependence of the x-sections of WW-production in selected helicity-state for the two designed CLIC stages [29].
Diboson processes were already scrutinised at LEP II [43], where aTGCs were constrained as \(\lambda _\gamma \in ~[-0.04,0.005]\). Similar searches are performed at the LHC, and it is believed that, by the end of the HL-LHC program (3 \(\hbox {ab}^{-1}\)), the sensitivity to these effects will have improved by more than an order of magnitude, depending on the final state [19, 20, 44]; further improvements are forecasted for the putative 27 TeV (15 \(\hbox {ab}^{-1}\)) HE-LHCextension, which we include for comparison. At 68% C.L,
where the results from WZ final states stem from Refs. [20, 44], while the \(W\gamma \) results from Ref. [19]. These are sumarized in Fig. 2; notice that, while the 1.5 TeV-run is competitive with HE-LHC, the 3 TeV one is about a factor three better.
3.2 Longitudinal \(W^+W^-\) and Zh final states
New physics in the Higgs sector manifests itself both in processes with longitudinal polarizations \(W^+_LW^-_L\) and \(Z_Lh\) associated production. At high-energy only one dimension-6 effect survives for each process and each helicity configuration [10, 45, 46]; we will therefore focus our analysis on the operators \(\mathscr {O}_W\) and \(\mathscr {O}_B\).
In the high-energy tree-level regime, the SM amplitudes are
where \(\varTheta \) corresponds to the angle between the incoming electron and the outgoing \(W^-\) or Z. BSM effects induce the following energy-growing effects relative to the SM, \(\varDelta \mathcal A_{\tiny {\text {BSM}}} = \mathcal{A}_{\tiny {\text {BSM}}}/\mathcal A_{\tiny {\text {SM}}}\)
with \(s_w\) and \(c_w\) the sine and cosine of the weak mixing angle. Here we treat \(\mathscr {O}_W\) and \(\mathscr {O}_B\) as independent (i.e. the S-parameter \(\sim c_W+c_B\) is free to vary, see also Ref. [47]). Notice that modifications of the input parameters do not induce energy-growth, as they must be proportional to the SM cross-sections.
Selection Cuts and Analysis. For longitudinal \(W^+W^-\) final states, the analysis is complicated by the fact that the SM amplitude \(\mathcal{A}^{00}_{SM}\) is much smaller than the transverse ones Eq. (11). This is due in part to the fact that there are more transverse helicity configurations, in part to the sum over \(SU(2)_L\) group factors that appear enhanced in the transverse amplitude, and in part to the forward enhancement from the t-channel singularity of the transverse amplitude. In inclusive (longitudinal + transverse) measurements, this large transverse fraction effectively acts as background at high-energy. However, at small energy the transverse/longitudinal interference is enhanced by finite-mass effects. So, in practice, the interference, though present, is suppressed.
The t-channel diagram entering the transverse amplitude–in which a neutrino is exchanged–only involves left-handed electrons (and right-handed positrons). For this reason, a polarization of the initial beam that preserves only right-handed electrons (and left-handed positrons) would suppress the transverse contribution and make the analysis of the longitudinal components more efficient. A strategy along these lines is mentioned in Ref. [48]; strangely enough, however, it is applied indiscriminately also to searches for \(\lambda _\gamma \) (equivalently, \(c_{3W}\)), where it doesn’t improve the sensitivity, since \((\mathcal{A}^{+-}_{\tiny {\text {SM}}})_{\text {R}}\approx 0\). Here we combine the benefits of partially polarized beams together with differential distributions in the polar angle, an important improvement given that CLIC polarization setups are not 100% and transversely polarized vectors still provide an overall important background.
We perform the \(W^-_L W^+_L\) analysis using the same cuts as for the above \(W^-_T W^+_T\) study, except from the binning in \(\varphi \) that plays no major role here and is ignored. For technical reasons related with the Whizard implementation of BSM effects, we only simulate the effects of \(\mathscr {O}_W\) and discuss how to recover the results for \(\mathscr {O}_B\) in Sect. 4.Footnote 7 The results are summarized in Table 4 and in the right panel of Fig. 2. Since here the azimuthal distributions are not highlighted, the more luminous fully hadronic channels give the tightest constraint as expected.
Searches fo these effects at LEP [43], gave \({c_W\in [-1.6, 3.6]}\), while forecasts for the HL-LHC [10] imply a reach \(c_W\in [-0.12, 0.12]\); we show these in Fig. 2 for comparison.Footnote 8
Associated Production. As argued above, high-energy Zh production is sensitive to similar effects as those entering WW processes. This channel includes however no relevant background: it is a rather simple process in which SM and BSM have identical angular distributions and interfere maximally, so that a simple counting analysis suffices.Footnote 9
We use MadGraph [51] to simulate ILC and CLIC, focussing on the highest energy stages, which offer the best sensitivity. We assume complete reconstruction of the final states. Additionally, we take into account acceptance, ISR and brehmstrahlung (not included in Madgraph) as an effective 50% reduction with respect to the nominal luminosity: this reflects the efficiency of the cuts in the third column of Table 2. The resulting reach is reported in Table 5.
4 Interpretation
4.1 BSM in the transverse sector
In Sect. 3.1 we have seen that dedicated analyses of WW at future linear colliders potentially provide an unprecedented precision on BSM interactions stemming from modifications of the transverse sector, a precision of the order of \(\sim 10^{-4}\) when expressed in terms of anomalous TGCs. The relevant question, however, is whether this precision would provide us with a better understanding of putative BSM dynamics. To answer this question, in this section we translate our results into BSM reach, for the weak and strong coupling scenarios discussed in Sect. 2 (Eqs. (4) and (7)).
First of all, it is important to accept that new physics that interacts with the transverse polarizations of vectors, generically modifies their self interactions (triple vertices), as well as the W/Z propagators, as discussed in Sect. 2. The latter induces energy-growing effects in Drell–Yann (DY) processes, which offer a fantastic probe for new physics, as discussed in Refs. [28, 29, 35, 52].
In Figs. 3 and 4 we compare the reach from DY processes with the reach of our WW analysis in different models, where we base CLIC results on the final 3 TeV stage only. DY results are taken from Refs. [28, 29] for HL-LHC and CLIC respectively, while diboson HL-LHC results are from Ref. [19].
Weak Coupling. Fig. 3 focusses on weakly coupled models, as discussed around Eq. (4). The dotted lines denote the theoretical predictions in situations where the EFT effects are dominantly produced by particles of a given spin 0, 1/2 or 1, according to Table 1. Generally, DY processes are likely to first discover deviations from the SM. In fact, for particles of spin-1 or 1/2, any effect that is visible in WW processes at the last CLIC stage, should have already been observed at the HL-LHC in DY. For particles of spin-0 instead, it is possible to that both will show up at CLIC only.
Nevertheless, if experiments find evidence for \(C_{2W} \ne 0\) and \(C_{3W} \ne 0\), then the size of these coefficients clues us into the mass scale (\(C_{2W,3W} = c_{2W,3W}/\varLambda ^2\)) while their ratio clues us into the spin, thereby providing valuable information on the most important properties–the kinematic information–about the BSM physics.Footnote 10
Relations such as this one–which depend on kinematic features of the BSM sector rather than its details–are very valuable. Recently, the authors of [53] obtained results analogous to those in Eq. (4) for a variety of dimension-6 and 8-operators that contribute to the 2-, 3-, and 4-point interactions of EW gauge bosons. Similar to our discussion in Sect. 2, one notes that various ratios of these quantities depend only on the spin of the underlying particle; it would be interesting to understand the general principle at work here.
The black dots in Fig. 3 denote the predictions from models with \(\mu (R)=2\) in Eq. (4) and a mass at the very edge of on-shell discovery at CLIC. Interestingly, while DY can consistently probe these theories, WW processes are somewhat penalised. This is due partially to the smaller cross sections in WW, partially to the difficulties of resurrecting the interference, and partially to a numerical accident that exhibits enhanced DY effects over WW ones, see Table 1. Larger \(\mu (R)\), instead, imply larger effects, and can be consistently tested also in WW; for instance a Dirac Fermion in an \(SU(2)_L\) representation with \(\mu (R)\sim 10\) and mass above CLIC threshold is visible also in WW processes and consistently described by the \(\mathscr {O}_{3W}\) EFT.
Strong Coupling. In Fig. 4, we focus on the models with multipolar interactions of Ref. [13], which assume new strongly coupled dynamics at the scale M, as captured by Eq. (7). As the coupling strength \(g_*\) increases, the WW channel becomes more relevant compared to DY. However, even at maximal strong coupling, the WW analysis does not seem competitive. Nevertheless we recall that the estimates of Eq. (7) are parametric as the scenarios of Ref. [13] do not have a weakly coupled and calculable analog. For this reason, WW processes still provide valuable information on these types of models and might even be more sensitive than DY.
4.2 BSM in the Higgs sector
The comparison between the reach of high-energy Zh associated production and processes with longitudinally polarized WW shows that, in terms of a single parameter, chosen to be the coefficient of \(\mathscr {O}_W\) in Sect. 3, Zh performs much better. In particular, the CLIC sensitivity translates roughly to scales of order \(\sim 25\) TeV in terms of the mass of heavy vector triples mentioned in [10].
Nevertheless, as shown in Eq. (18), Zh and WW are sensitive to different combinations of \(c_W\) and \(c_B\), and their combined information allows us to reach this 2-dimensional parameter space. Notice that the combination \({\hat{s}}=(c_W+c_B)m_W^2/\varLambda ^2\) corresponds to the S parameter [35, 54], which was measured with per-mille precision at LEP-I and is a major motivation for the construction of circular \(e^+e^-\) colliders operating for extended periods of time on the Z-pole resonance.
We focus on the high-energy CLIC run at 3 TeV, where the expressions for the amplitudes in the massless limit approximate well the SM and BSM amplitudes, and translate the results of Sect. 3.2 (performed in terms of a unique parameter), into a combined analysis for \(c_W\) and \(c_B\) using Eqs. (17) and (18).Footnote 11 As motivated in Sect. 2, we assume the presence of these two operators only.
In Fig. 5 we show the 1-sigma reach from our CLIC analyses in different channels and their combination. For comparison we show the direction along which \({\hat{S}}\)-parameter constraints would lie. Our analysis shows that the CLIC analysis is complementary to a precise Z pole analysis, and that, for the latter to be able to provide improved information, it should reach a precision on \({\hat{S}}\) of order \(10^{-5}\), in the normalisation of Ref. [35], corresponding to \(c_B+c_W\sim 2\times 10^{-3}\).
5 Conclusion
In this work, the high-energy indirect reach on BSM effects in Dibosons production at CLIC and ILC has been assessed, using an EFT approach to interpret the results in a model independent way.
We have divided BSM effects into two classes, those that affect the physics of transverse polarisations and those that affect the longitudinal ones and, by the equivalence theorem, also the Higgs sector. A study of the transversely polarized W’s has been used to explore BSM deviations encoded in the operator \(\mathscr {O}_{3W}\), while longitudinal bosons are used to probe new physics in the Higgs-sector in the form of the operators \(\mathscr {O}_W\) and \(\mathscr {O}_B\). All these operators can be generated in sensible UV-models.
Our results, summurized in Tables 3, 4 and 5 are derived from the analysis of realistic ILC and CLIC simulations. We have designed dedicated searches to improve the BSM sensitivity to the above operators. In particular, the interference in the transverse components has been enhanced using the techniques described in Ref. [19], and the possibility of polarizing the beam has been exploited to reduce the background and improve the sensitivity on longitudinally polarized events.
Despite the fixed center-of-mass energy of lepton colliders, ISR and brehmstrahlung effectively produce a spread in the incoming spectrum that in practice renders the analysis similar to the LHC one. This is manifest in the reconstruction of leptonically decaying W-bosons, where the incertitude of the initial momentum along the beam axis translates into an ambiguity in the reconstruction of the azimuthal angle, Eq. (15), that makes the analysis blind to CP-odd effects. Nevertheless, for CP-even effects in the transverse polarizations, our dedicated analysis shows a net improvement, by approximately a factor of two with respect to inclusive analyses; this gain is roughly equivalent to a factor of four in the effective luminosity.
Our results are interpreted in terms of a wide class of well-motivated BSM models. For new physics in the transverse polarizations we consider both weakly-coupled (Fig. 3) and strongly-coupled scenarios (Fig. 4), both of which produce a correlated signal (of different relative size) in dibosons and Drell–Yann processes. Quite generally, DY processes offer a better possibility for new discoveries in both cases, yet dibosons still represent an important probe for precision studies. Both processes are sensible to weakly coupled loop-induced effects, if the mass of the new states is not far above CLIC direct reach, and if they belong to large representations of \(SU(2)_L\).
On the other hand, in the context of longitudinal polarizations, we have compared our study with a synthetic analysis of Zh associated production. The latter has been shown to be generically more competitive when the effect of a single operator is taken into account. Nevertheless, WW provides complementary as well as additional information when effects from both \(\mathscr {O}_W\) and \(\mathscr {O}_B\) are included, as shown in Fig. 5.
Data Availability Statement
This manuscript has no associated data or the data will not be deposited. [Authors’ comment: The datasets generated during and/or analysed during the current study are available from the corresponding authors on reasonable request.]
Notes
Here we focus on CP-even BSM physics, as CP-odd effects of this type are well constrained by measurements of anomalous dipole moments [34].
One can also understand this from helicity amplitudes. \(\mathscr {O}_{3W}\) gives a three-point amplitude between gauge bosons of all the same helicity \(---\), i.e. \(\lambda _{\gamma }\) measures the \(+++\) and \(---\) coupling of EW gauge bosons. Moreover, in renormalizable theories, tree-level amplitudes of all the same helicity vanish. As we restricted ourselves to renormalizable interactions in the UV Lagrangian, this implies that we cannot generate \(\mathscr {O}_{3W}\) at tree-level.
\(\text {tr}_{(j_1,j_2)}\big (\mathscr {J}^{\mu \nu }\mathscr {J}^{\rho \sigma } \big ) = k(j_1,j_2)\big (g^{\mu \rho }g^{\nu \sigma } - g^{\mu \sigma }g^{\nu \rho }\big )\). For a gauge field \(k = 2\), for a Dirac fermion \(k= 1\), while \(k=0\) for scalars, Goldstone fields, and ghosts.
The point here is that \(N_{\text {dof}}\) is a physical quantity, but that is not necessarily true of the Dynkin index k. For massive vectors, the Goldstone and ghost fields are scalars and therefore have \(k=0\), which is why Eq. (5) only needs k for the gauge field. For massive higher spin particles, the Goldstone and ghost fields can be in non-trivial representations of SO(3, 1). The question one wants to answer is if these contribute in such a way that Eq. (5) could be expressed in terms of only physical quantities (one speculative guess is that it depends only on \(N_{\text {dof}}\) and the Dynkin index of the SO(3) little group representation to which the particle belongs). We note that even though the question at hand–what is the one-loop contribution from massive higher-spin states–is technically well posed, the regime of validity of the perturbative expansion is narrow: the higher-spin action is itself an effective action with a cutoff, and Ref. [39] showed that a single higher-spin particle cannot be parametrically lighter than this cutoff, so that a weak coupling treatment of isolated higher-spin particles is typically not possible.
Jet substructure techniques for tagging W-boson decays to charm/strange quarks or identifying charge could offer a handle on this.
In principle the analysis with \(l=e^\pm \) is complicated because of a t-channel diagram not present in the muon channel; however, we have verrified that, due to its different kinematics, this effect can be efficiently singled out by using polar angle and lepton transverse-mass cuts.
We use an implementation of dimension-6 operators based on aTGCs which includes a single effect \(\delta g_1^Z\). As mentioned earlier and discussed further in Sect. 4, the high-energy limit only receives a contribution from a certain linear combination of \(\mathscr {O}_W\) and \(\mathscr {O}_B\). So the magnitude of the effect we simulated can be thought of as \(\delta g_1^Z\sim L(c_{W},c_{B})(m_Z^2/\varLambda ^2)\) at high-energy, where \(L(c_{W},c_{B})\) is a linear combination of the two coefficients different for different amplitudes.
For completeness, we also mention that the previous CLIC-Report forecasts [48] are slightly more pessimistic but still quite in agreement with our results.
This conclusion also holds for the exceptional case where the BSM physics contains neutral, triplet vectors that generate \(\mathscr {O}_{2W}\) at tree-level. In this case \(C_{2W} \approx C_{2W}^{\text {tree}} = {\tilde{g}}^2/M^2\) with \({\tilde{g}}\) a coupling constant of the UV physics [14]. In this case, for order-one coupling constants, \(C_{2W}/C_{3W} \sim (4\pi )^2\) is large and easily distinguished.
We approximate the left/right polarised beam, which contains 90% of left-handed/right-handed electrons, with a 100% polarised beam; additionally, for the right-handed we focus on the central bins of polar angle, where this approximation works particularly well, as the number of transverse is sensibly lower.
References
B. Henning, D. Lombardo, M. Riembau, F. Riva, Phys. Rev. Lett. 123(18), 181801 (2019). https://doi.org/10.1103/PhysRevLett.123.181801
D.B. Kaplan, H. Georgi, Phys. Lett. 136B, 183 (1984). https://doi.org/10.1016/0370-2693(84)91177-8
D.B. Kaplan, H. Georgi, S. Dimopoulos, Phys. Lett. 136B, 187 (1984). https://doi.org/10.1016/0370-2693(84)91178-X
R. Contino, Y. Nomura, A. Pomarol, Nucl. Phys. B 671, 148 (2003). https://doi.org/10.1016/j.nuclphysb.2003.08.027
K. Agashe, R. Contino, A. Pomarol, Nucl. Phys. B 719, 165 (2005). https://doi.org/10.1016/j.nuclphysb.2005.04.035
G.F. Giudice, C. Grojean, A. Pomarol, R. Rattazzi, JHEP 06, 045 (2007). https://doi.org/10.1088/1126-6708/2007/06/045
A. Biekötter, A. Knochel, M. Krämer, D. Liu, F. Riva, Phys. Rev. D 91, 055029 (2015). https://doi.org/10.1103/PhysRevD.91.055029
S. Banerjee, C. Englert, R.S. Gupta, M. Spannowsky, Phys. Rev. D 98(9), 095012 (2018). https://doi.org/10.1103/PhysRevD.98.095012
D. Liu, L.T. Wang, Phys. Rev. D 99(5), 055001 (2019). https://doi.org/10.1103/PhysRevD.99.055001
R. Franceschini, G. Panico, A. Pomarol, F. Riva, A. Wulzer, JHEP 02, 111 (2018). https://doi.org/10.1007/JHEP02(2018)111
G. Durieux, C. Grojean, J. Gu, K. Wang, JHEP 09, 014 (2017). https://doi.org/10.1007/JHEP09(2017)014
C. Grojean, M. Montull, M. Riembau, JHEP 03, 020 (2019). https://doi.org/10.1007/JHEP03(2019)020
D. Liu, A. Pomarol, R. Rattazzi, F. Riva, JHEP 11, 141 (2016). https://doi.org/10.1007/JHEP11(2016)141
B. Henning, X. Lu, H. Murayama, JHEP 01, 023 (2016). https://doi.org/10.1007/JHEP01(2016)023
D.B. Kaplan, Nucl. Phys. B 365, 259 (1991). https://doi.org/10.1016/S0550-3213(05)80021-5
B. Bellazzini, F. Riva, J. Serra, F. Sgarlata, JHEP 11, 020 (2017). https://doi.org/10.1007/JHEP11(2017)020
B. Keren-Zur, P. Lodone, M. Nardecchia, D. Pappadopulo, R. Rattazzi, L. Vecchi, Nucl. Phys. B 867, 394 (2013). https://doi.org/10.1016/j.nuclphysb.2012.10.012
A. Azatov, R. Contino, C.S. Machado, F. Riva, Phys. Rev. D 95(6), 065014 (2017). https://doi.org/10.1103/PhysRevD.95.065014
G. Panico, F. Riva, A. Wulzer, Phys. Lett. B 776, 473 (2018). https://doi.org/10.1016/j.physletb.2017.11.068
A. Azatov, J. Elias-Miro, Y. Reyimuaji, E. Venturini, JHEP 10, 027 (2017). https://doi.org/10.1007/JHEP10(2017)027
S. Banerjee, R.S. Gupta, J.Y. Reiness, M. Spannowsky, Phys. Rev. D 100(11), 115004 (2019). https://doi.org/10.1103/PhysRevD.100.115004
J. Ellis, T. You, JHEP 03, 089 (2016). https://doi.org/10.1007/JHEP03(2016)089
J. Ellis, P. Roloff, V. Sanz, T. You, JHEP 05, 096 (2017). https://doi.org/10.1007/JHEP05(2017)096
S. Di Vita, G. Durieux, C. Grojean, J. Gu, Z. Liu, G. Panico, M. Riembau, T. Vantalon, JHEP 02, 178 (2018). https://doi.org/10.1007/JHEP02(2018)178
S. Dutta, K. Hagiwara, Y. Matsumoto, Phys. Rev. D 78, 115016 (2008). https://doi.org/10.1103/PhysRevD.78.115016
K. Hagiwara, S. Ishihara, J. Kamoshita, B.A. Kniehl, Eur. Phys. J. C 14, 457 (2000). https://doi.org/10.1007/s100520000366
K. Hagiwara, T. Hatsukano, S. Ishihara, R. Szalapski, Nucl. Phys. B 496, 66 (1997). https://doi.org/10.1016/S0550-3213(97)00208-3
M. Farina, G. Panico, D. Pappadopulo, J.T. Ruderman, R. Torre, A. Wulzer, Phys. Lett. B 772, 210 (2017). https://doi.org/10.1016/j.physletb.2017.06.043
R. Franceschini, et al., (2018). https://doi.org/10.23731/CYRM-2018-003
G. Brooijmans et al., in Les Houches 2017: Physics at TeV Colliders New Physics Working Group Report (2018). http://lss.fnal.gov/archive/2017/conf/fermilab-conf-17-664-ppd.pdf
J. De Blas, G. Durieux, C. Grojean, J. Gu, A. Paul, JHEP 12, 117 (2019). https://doi.org/10.1007/JHEP12(2019)117
W. Buchmuller, D. Wyler, Nucl. Phys. B 268, 621 (1986). https://doi.org/10.1016/0550-3213(86)90262-2
B. Grzadkowski, M. Iskrzynski, M. Misiak, J. Rosiek, JHEP 10, 085 (2010). https://doi.org/10.1007/JHEP10(2010)085
G. Panico, A. Pomarol, M. Riembau, JHEP 04, 090 (2019). https://doi.org/10.1007/JHEP04(2019)090
R. Barbieri, A. Pomarol, R. Rattazzi, A. Strumia, Nucl. Phys. B 703, 127 (2004). https://doi.org/10.1016/j.nuclphysb.2004.10.014
K. Hagiwara, R.D. Peccei, D. Zeppenfeld, K. Hikasa, Nucl. Phys. B 282, 253 (1987). https://doi.org/10.1016/0550-3213(87)90685-7
C. Arzt, M.B. Einhorn, J. Wudka, Nucl. Phys. B 433, 41 (1995). https://doi.org/10.1016/0550-3213(94)00336-D
J. de Blas, J.C. Criado, M. Perez-Victoria, J. Santiago, JHEP 03, 109 (2018). https://doi.org/10.1007/JHEP03(2018)109
B. Bellazzini, F. Riva, J. Serra, F. Sgarlata, JHEP 10, 189 (2019). https://doi.org/10.1007/JHEP10(2019)189
R. Contino, A. Falkowski, F. Goertz, C. Grojean, F. Riva, JHEP 07, 144 (2016). https://doi.org/10.1007/JHEP07(2016)144
D. Greco, D. Liu, JHEP 12, 126 (2014). https://doi.org/10.1007/JHEP12(2014)126
W. Kilian, T. Ohl, J. Reuter, Eur. Phys. J. C 71, 1742 (2011). https://doi.org/10.1140/epjc/s10052-011-1742-y
O.t.L.E.W.G. The LEP Collaborations ALEPH, L3, D. the SLD Heavy Flavour Group, (2003)
A. Azatov, D. Barducci, E. Venturini, (2019)
M. Jacob, G.C. Wick, Ann. Phys. 7, 404 (1959)
M. Jacob, G.C. Wick, Ann. Phys. 281, 774 (2000)
Z. Zhang, Phys. Rev. Lett. 118(1), 011803 (2017). https://doi.org/10.1103/PhysRevLett.118.011803
E. Accomando et al, in Proceedings, 11th International Conference on Hadron spectroscopy (Hadron 2005): Rio de Janeiro, Brazil, August 21-26, 2005 (2004). http://weblib.cern.ch/abstract?CERN-2004-005
N. Craig, J. Gu, Z. Liu, K. Wang, JHEP 03, 050 (2016). https://doi.org/10.1007/JHEP03(2016)050
M. Beneke, D. Boito, Y.M. Wang, JHEP 11, 028 (2014). https://doi.org/10.1007/JHEP11(2014)028
J. Alwall, R. Frederix, S. Frixione, V. Hirschi, F. Maltoni, O. Mattelaer, H.S. Shao, T. Stelzer, P. Torrielli, M. Zaro, JHEP 07, 079 (2014). https://doi.org/10.1007/JHEP07(2014)079
S. Alioli, M. Farina, D. Pappadopulo, J.T. Ruderman, JHEP 07, 097 (2017). https://doi.org/10.1007/JHEP07(2017)097
J. Quevillon, C. Smith, S. Touati, Phys. Rev. D 99(1), 013003 (2019). https://doi.org/10.1103/PhysRevD.99.013003
M.E. Peskin, T. Takeuchi, Phys. Rev. D 46, 381 (1992). https://doi.org/10.1103/PhysRevD.46.381
Acknowledgements
We thank Roberto Contino, Sandeepan Gupta, Marc Riembau, Philipp Roloff and Andrea Wulzer for interesting discussions. This work is supported by the Swiss National Science Foundation under grant no. PP00P2-170578.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Funded by SCOAP3
About this article
Cite this article
Henning, B., Lombardo, D.M. & Riva, F. Improved BSM sensitivity in diboson processes at linear colliders. Eur. Phys. J. C 80, 220 (2020). https://doi.org/10.1140/epjc/s10052-020-7695-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjc/s10052-020-7695-2