Abstract
This paper presents the results of studying samples of glass-carbon plastics based on reinforcing fillers subjected to ion-plasma treatment. The influence of the speed of surface treatment on the complex of physical and mechanical characteristics of glass-fiber-reinforced plastics is shown. According to the results of microstructural studies, it was found that ion-plasma treatment promotes an increase in interfacial interaction at the fiber–matrix interface. The effect of ion-plasma treatment of reinforcing fillers on the properties of PCM samples in a moisture-saturated state is shown.
Similar content being viewed by others
REFERENCES
Kablov, E.N., Startsev, O.V., and Panin, S.V., Moisture transfer in carbon-fiber-reinforced plastic with degraded surface, Dokl. Phys. Chem., 2015, vol. 461, no. 2, pp. 80–83. https://doi.org/10.1134/S001250161504003X
Kablov, E.N., Valueva, M.I., Zelenina, I.V., Khmelnitskii, V.V., and Aleksashin, V.M., Carbon plastics based on benzoxazine oligomers – perspective materials, Tr. VIAM, 2020, no. 1 (85), pp. 68–77. https://doi.org/10.18577/2307/-6046-2020-0-1-68-77 http://www.viam-works.ru. Accessed November 22, 2021.
Kablov, E.N., The role of fundamental research in the creation of new generation materials, Tezisy dokladov XXI Mendeleevskogo s’’ezda po obshchei i prikladnoi khimii (Abstr. 21st Mendeleev Congr. on General and Applied Chemistry), St. Petersburg, 2019, vol. 4, p. 24.
Kolpachkov, E.D., Marakhovskii, P.S., Petrova, A.P., Shchur, P.A., Lonskii, S.L., Chernyaeva, I.Yu., and Shvedov, A.V., On the influence of ion-plasma treatment on the surface properties of reinforcing fillers, V-opr. Materialoved., 2021, no. 3 (107), pp. 136–149.
Tikhomirov, A.S., Sorokina, N.E., and Avdeev, V.V., Surface modification of carbon fibers with nitric acid solutions, Inorg. Mater., 2011, vol. 47, pp. 609–613. https://doi.org/10.1134/S0020168511060203
Li, J. and Sun, F.F., The effect of nitric acid oxidization treatment on the interface of carbon fiber-reinforced thermoplastic polystyrene composite, Polym.-Plast. Technol. Eng., 2009, vol. 48, no. 7, pp. 711–715.
Vazquez-Santos, M.B. and Suarez-Garcia, F., Activated carbon fibers with a high heteroatom content by chemical activation of PBO with phosphoric acid, Langmuir, 2012, vol. 13, pp. 5850–5860.
Fu, R., Liu, L., and Huang, W., Studies on the structure of activated carbon fibers activated by phosphoric acid, J. Appl. Polym. Sci., 2003, vol. 87, pp. 2253–2261.
Pradhan, B.K. and Sandle, N.K., Effect of different oxidizing agent treatments on the surface properties of activated carbons, Carbon, 1999, vol. 37, pp. 1323–1332.
Suarez-Garcia, F., Castro-Muniz, A., and Tascon, J.M.D., Activated carbon fibers with a high content of surface functional groups by phosphoric acid activation of PPTA, J. Colloid Interface Sci., 2011, vol. 361, pp. 307–315.
Jones, C., Effects of electrochemical and plasma treatments on carbon fibre surfaces, Surf. Interface Anal., 1993, vol. 20, pp. 357–367.
Szazdi, L., Gulyas, J., and Pukanszky, B., Electrochemical oxidation of carbon fibers: Adsorption of the electrolyte and its effect on interfacial adhesion, Composites, Part A, 2002, vol. 33, pp. 1361–1365.
Beider, E.Ya., Petrova, G.N., and Izotova, T.F., An influence of coupling agent on properties of thermoplastic glass reinforced plastics, Tr. VIAM, 2014, no. 9, art. ID 7. https://doi.org/10.18577/2307/-6046-2014-0-9-7-7 http://www.viam-works.ru. Accessed November 22, 2021.
Beider, E.Ya., Petrova, G.N., and Dykun, M.I., Dressing of carbon fibers – fillers of thermoplastic carbon reinforced plastics, Tr. VIAM, 2014, no. 10, art. ID 3. https://doi.org/10.18577/2307/-6046-2014-0-10-3-3 http://www.viam-works.ru. Accessed November 22, 2021.
Petrova, G.N. and Beider, E.Ya., Development and research of finishing compositions for thermoplastic carbon plastics, Tr. VIAM, 2016, no. 12, art. ID 9. https://doi.org/10.18577/2307/-6046-2016-0-12-9-9 http://www.viam-works.ru. Accessed November 22, 2021.
Nacharkina, A.V., Zelenina, I.V., Valueva, M.I., and Voronina, O.G., Influence of additional sizing of carbon fiber in producing volume-reinforced preforms on the properties of high-temperature carbon fiber, Tr. VIAM, 2021, no. 1, pp. 54–65. https://doi.org/10.18577/2307-6046-2021-0-1-54-65 http://www.viam-works.ru. Accessed November 22, 2021.
Petrova, G.N. and Beider, E.Ya., Development and research of finishing compositions for thermoplastic carbon plastics, Tr. VIAM, 2016, no. 12, art. ID 9. https://doi.org/10.18577/2307/-6046-2016-0-12-9-9 http://www.viam-works.ru. Accessed November 22, 2021.
ACKNOWLEDGMENTS
We express our gratitude to S.L. Lonskoi, engineer of the second category at the laboratory Polymer Binders, Adhesives, and Special Liquids, for conducting microstructural studies.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by M. Drozdova
Rights and permissions
About this article
Cite this article
Kolpachkov, E.D., Shchur, P.A., Kurshev, E.V. et al. Influence of Ion-Plasma Treatment of Reinforcing Fillers on the Complex of PCM Properties. Inorg. Mater. Appl. Res. 13, 1622–1630 (2022). https://doi.org/10.1134/S2075113322060119
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113322060119