Abstract
Phase transformations for alloy V-1341 of the Al–Mg–Si system under cooling from quenching temperature are investigated by differential scanning calorimetry and by transmission electron microscopy. An isothermal phase transformation diagram is generated by a design-experiment method. It is shown that the proposed method developed according to quenching factor theory makes it possible to predict reliably the dispersion hardening as a function of cooling rate for sheets made of alloy V-1341.
Similar content being viewed by others
REFERENCES
Antipov, V.V., Prospective development of aluminum, magnesium, and titanium alloys for aerospace industry, Aviats. Mater. Tekhnol., 2017, suppl., pp. 186–194. https://doi.org/10.18577/2071-9140-2017-0-S-186 194
Antipov, V.V., Klochkova, Yu.Yu., and Romanenko, V.A., Modern aluminum and aluminum-lithium alloys, Aviats. Mater. Tekhnol., 2017, suppl., pp. 195–211. https://doi.org/10.18577/2071-9140-2017-0-S-195-211
Kuznetsov, A.O., Oglodkov, M.S., and Klimkina, A.A., Effect of chemical composition on the structure and properties of Al–Mg–Si alloy system, Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., 2018, no. 7 (67), art. ID 1. https://doi.org/10.18577/2307-6046-2018-0-7-3-9. http://www.viam-works.ru. Accessed July 15, 2018.
Staley, J.T., Quench factor analysis of aluminum alloys, Mater. Sci. Technol., 1987, vol. 3, no. 11, pp. 923–935.
Puchkov, Yu.A. and Berezina, S.L., Use of the theory of hardening factor for predicting the properties of articles from heat-hardenable aluminum alloy V91, Met. Sci. Heat Treat., 2014, vol. 56, nos. 3–4, pp. 131–136.
Bratland, D.H., et al., Overview No. 124 Modelling of precipitation reactions in industrial processing, Acta Mater., 1997, vol. 45, no. 1, pp. 1–22.
Benarieb, I. and Puchkov, Yu.A., Development of a method for computing temperature-time-property C-curves for deformable Al–Mg–Si alloys, Zagotovitel’nye Proizvod.Mashinostr., 2018, vol. 16, no. 2, pp. 83–89.
Kablov, E.N., Strategic development of materials and technologies for their processing until 2030, Aviats. Mater. Tekhnol., 2012, no. 5, pp. 7–17.
Fridlyander, I.N., Grushko, O.E., and Sheveleva, L.M., Heat hardened alloy V1341 for cold pressing of sheets, Met. Sci. Heat Treat., 2004, vol. 46, nos. 9–10, pp. 361–364.
Kablov, E.N., Grushko, O.E., and Grinevich, A.V., “Flying metal” for automobile industry, Gruzovik, 2005, no. 10, pp. 16–24.
Ovchinnikov, V.V. and Grushko, O.E., Advanced welded aluminum alloy of Al–Mg–Si system, Mashinostr. Inzh. Obraz., 2005, no. 3, pp. 2–11.
Klochkov, G.G., Grushko, O.E., Ovchinnikov, V.V., and Popov, V.I., Commercial production of high-technology alloy V-1341 of the Al–Mg–Si system with calcium addition, Met. Sci. Heat Treat., 2015, vol. 57, nos. 1–2, pp. 9–12.
Gureyeva, M.A. and Grushko, O.E., Homogenization conditions and mechanical properties of ingots of calcium-doped AV alloy, Inorg. Mater.: Appl. Res., 2016, vol. 7, no. 4, pp. 582–585.
Klochkov, G.G., Klochkova, Yu.Yu., and Romanenko, V.A., Influence of deformation temperature on the structure and properties of pressed profiles of V-1341 alloy of Al–Mg–Si system, Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., 2016, no. 9 (45), art. ID 1. https://doi.org/10.18577/2307-6046-2016-0-9-1-1. http://www.viam-works.ru. Accessed February 15, 2018.
Klochkov, G.G., Ovchinnikov, V.V., Klochkova, Yu.Yu., and Romanenko, V.A., The structure and properties of sheets from high-tech V-1341 alloy of Al–Mg–Si system, Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., 2017, no. 12 (60), art. ID 3. https://doi.org/10.18577/2307-6046-2017-0-12-3-3. http://www.viam-works.ru. Accessed February 15, 2018.
Alekseev, A.A. and Ber, L.B., Diagrams of phase transformations during aging of alloys of Al–Cu and Al–Mg–Si–(Cu) systems, Tekhnol. Legk. Splavov, 1991, no. 3, pp. 18–20.
Kablov, E.N., Lukina, E.A., Svitneva, S.V., et al., Formation of metastable phases during solid solution decay during artificial aging of Al alloys, Tekhnol. Legk. Splavov, 2016, no. 3, pp. 7–17.
Davydov, V.G., Zakharov, V.V., Zakharov, E.D., and Novikov, I.I., Diagrammy izotermicheskogo raspada rastvora v alyuminievykh splavakh. Spravochnik (Diagrams of Isothermal Decay of Solution in Aluminum Alloys: Handbook), Novikov, I.I., Ed., Moscow: Metallurgiya, 1973.
Ryabov, D.K., Kolobnev, N.I., Makhsidov, V.V., and Fomina, M.A., Stability of a supersaturated solid solution of 1913 alloy sheets during quenching, Metall. Mashinostr., 2012, no. 3, pp. 30–33.
Zakharov, V.V. and Fisenko, I.A., Effect of homogenization on the structure and properties of alloy of the Al–Zn–Mg–Sc–Zr system, Met. Sci. Heat Treat., 2018, vol. 60, nos. 5–6, pp. 354–359.
Puchkov, Yu.A. and Fam Khong Fu, Effect of quenching cooling modes on the structure and properties of alloys of the Al–Mg–Si system, Zagotovitel’nye Proizvod. Mashinostr., 2016, no. 4, pp. 37–42.
Milkereit, B., Schick, C., and Kessler, O., Continuous cooling precipitation diagrams depending on the composition of aluminum-magnesium-silicon alloys, Proc. 12th Int. Conf. on Aluminum Alloys, Tokyo: Jpn. Inst. Light Met., 2010, pp. 407–412.
Shang, B.C., et al., Investigation of quench sensitivity and transformation kinetics during isothermal treatment in 6082 aluminum alloy, Mater. Des., 2011, vol. 32, no. 7, pp. 3818–3822.
Li, H., Zeng, C., Han, M., Liu, J., and Lu, X., Time-temperature-property curves for quench sensitivity of 6063 aluminum alloy, Trans. Nonferrous Met. Soc. China, 2013, vol. 23, pp. 38–45.
Milkereit, B., Giersberg, L., Kessler, O., and Schick, C., Isothermal time-temperature precipitation diagram for an aluminum alloy 6005A by in situ DSC experiments, Materials, 2014, vol. 7, pp. 2631–2649.
Milkereit, B. and Starink, M.J., Quench sensitivity of Al–Mg–Si alloys: A model for linear cooling and strengthening, Mater. Des., 2015, vol. 76, pp. 117–129.
Loshchinin, Yu.V., Pakhomkin, S.I., and Fokin, A.S., The influence of the heating rate in the study of phase transformations in aluminum alloys by differential scanning calorimetry, Aviats. Mater. Tekhnol., 2011, no. 2, pp. 3–6.
ACKNOWLEDGMENTS
We thank S.I. Pakhomov and A.V. Zavadskii (All-Russian Scientific Research Institute of Aviation Materials) for the invaluable contribution to our investigations.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Yu. Zikeeva
Rights and permissions
About this article
Cite this article
Benariev, I., Puchkov, Y.A., Klochkov, G.G. et al. Effect of Cooling Rate under Quenching on the Structure and Properties of Sheets Made of High-Tech Alloy V-1341 of the Al–Mg–Si System. Inorg. Mater. Appl. Res. 11, 202–207 (2020). https://doi.org/10.1134/S2075113320010074
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113320010074