Abstract
The adhesion characteristics of an epoxyphosphazene-modified binder based on epoxy diane resin ED-20 and diaminodiphenylsulfone curing agent are studied. It is shown that the introduction of epoxyphosphazene into the epoxy resin facilitates the growth of shear adhesive strength in steel joints. Upon the addition of 10% of epoxyphosphazene the strength of adhesive joints increases by 20% and the strength of joints with steel fibers increases by 20–80% (depending on the size of the samples); the flexural strength of the binder grows by a factor of 2, and its specific impact strength grows by a factor of 2.5–3.0. Possible reasons behind the observed changes are considered.
Similar content being viewed by others
REFERENCES
M. Biron, Thermosets and Composites: Material Selection, Applications, Manufacturing and Cost Analysis (Elsevier, Amsterdam, 2013).
E. M. Petrie, Epoxy Adhesive Formulations (McGraw Hill Professional, New York, 2005).
E. W. Flick, Epoxy Resins, Curing Agents, Compounds, and Modifiers: An Industrial Guide (William Andrew, Mill Road; Park Ridge, 2012).
Y. W. Chen-Yang, H. F. Lee, and C. Y. Yuan, J. Polym. Sci., Part A: Polym. Chem. 38, 972 (2000).
M. El Gouri, A. El Bachiri, S. E. Hegazi, R. Ziraoui, M. Rafik, and A. El Harfi, J. Mater. Environ. Sci. 2, 319 (2011).
M. El Gouri, A. El Bachiri, S. E. Hegazi, M. Rafik, and A. El Harfi, Polym. Degrad. Stab. 94, 2101 (2009).
X. Gu, X. Huang, H. Wei, and X. Tang, Eur. Polym. J. 47, 903 (2011).
K. Krishnadevi and V. Selvaraj, Polym. Bull. 74, 1791 (2017).
R. Liu and X. Wang, Polym. Degrad. Stab. 94, 617 (2009).
L. Qian, L. Ye, G. Xu, J. Liu, and J. Guo, Polym. Degrad. Stab. 96, 1118 (2011).
L. Qian, L. Ye, G. Xu, J. Liu, and J. Guo, Polymer 52, 5486 (2011).
M.-J. Xu, G.-R. Xu, Y. Leng, and B. Li, Polym. Degrad. Stab. 123, 105 (2016).
I. V. Terekhov, S. N. Filatov, E. M. Chistyakov, V. V. Kireev, and R. S. Borisov, Phosphorus, Sulfur, Silicon Relat. Elem. 192, 544 (2017).
I. S. Sirotin, Yu. V. Bilichenko, K. A. Brigadnov, V. V. Kireev, B. M. Prudskov, and R. S. Borisov, Polym. Sci., Ser. B 56, 471 (2014).
K. A. Brigadnov, Y. V. Bilichenko, V. A. Polyakov, R. S. Borisov, K. I. Gusev, T. A. Rudakova, S. N. Filatov, and V. V. Kireev, Polym. Sci., Ser. B 58, 549 (2016).
RF Patent No. 2639708 (2017).
M. P. Arinina, V. A. Kostenko, I. Y. Gorbunova, S. O. Il’in, and A. Y. Malkin, Polym. Sci., Ser. A 60, 683 (2018).
V. V. Kireev, Yu. V. Bilichenko, R. S. Borisov, I. S. Sirotin, and S. N. Filatov, Int. Polym. Sci. Technol. 44 (4), T25 (2017).
D. V. Onuchin, K. A. Brigadnov, I. Yu. Gorbunova, I. S. Sirotin, Yu. V. Bilichenko, S. N. Filatov, M. L. Kerber, T. P. Kravchenko, and V. V. Kireev, Polym. Sci., Ser. B 57, 402 (2015).
T. V. Brantseva, S. V. Antonov, and I. Y. Gorbunova, Int. J. Adhes. Adhes. 82, 263 (2018).
Y. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and A. M. Kuperman, Polym. Sci., Ser. A 58, 659 (2016).
P.-S. Shin, Colloids Surf., A 544, 68 (2018).
Y. A. Gorbatkina, V. G. Ivanova-Mumzhieva, R. I. Sopotov, I. Y. Gorbunova, M. L. Kerber, and V. A. Koroteev, Polym. Sci., Ser. D 8, 181 (2015).
D. V. Onuchin, I. S. Sirotin, G. A. Pavlova, S. N. Filatov, V. V. Kireev, M. L. Kerber, and I. Y. Gorbunova, Polym. Sci., Ser. B 60, 182 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by T. Soboleva
Rights and permissions
About this article
Cite this article
Onuchin, D.V., Sirotin, I.S., Sarychev, I.A. et al. Physicochemical Properties of Epoxy Composites Modified with Epoxyphosphazene. Polym. Sci. Ser. B 61, 286–293 (2019). https://doi.org/10.1134/S1560090419030084
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1560090419030084