Abstract
The review covers information from patents and papers that have been published in the past 5 years and deal with the synthesis of ester plasticizers for polyvinyl chloride. The main trends in the progress of this field are analyzed. Data on new esterification catalysts are presented. Particular attention is paid to plasticizers derived from terephthalic acid, which show promise for replacing toxic dioctyl phthalate. The results of studies on synthesis and properties of nonphthalate plasticizers based on benzene, toluene, naphthalene, cyclohexane, and norbornene are considered. Synthesis methods and prospects for using plasticizers derived from renewable vegetable raw materials, namely, citrates, succinates, triglycerides, fatty acid esters, and sugar derivatives, are discussed.
Similar content being viewed by others
References
Thinius, K., Chemie, Physik und Technologie der Weichmacher, Leipzig, 1963.
Barshtein, R.S., Kirilovich, V.I., and Nosovskii, Yu.E., Plastifikatory dlya polimerov (Plasticizers for Polymers), Moscow: Khimiya, 1982.
Mekonnen, T., Mussone, P., Khalilb, H., et al., J. Mater. Chem. A, 2013, vol. 1, no. 43, pp. 13379–13398.
Vieira, M.G.A., Silva, M.A., Santos, L.O., et al., Eur. Polym. J., 2011, vol. 47, pp. 254–263.
PVC Handbook, Wilkes, C.E., Summers, J.W., and Daniels, C.E., Eds., Munich: Hanser, 2005.
Wypych, A., Plasticizers Databook, Toronto: ChemTec, 2013, vol.1.
Wypych, G., Handbook of Plastisizers, Toronto: ChemTec, 2012, vol.2.
Zweifel, H., Maier, R.D., and Schiller, M., Plastics Additives, Munich: Hanser, 2009.
Handbook of Vinyl Formulating, Grossman, R.F., Ed., Wiley, 2008.
Rahman, M. and Brazel, C.S., Prog. Polym. Sci., 2004, vol. 29, no. 12, pp. 1223–1248.
Chen-lu, L. and Xiu-mei, L., Plastics Additives, 2010, vol. 4, p. 003.
Daniels, P.H., J. Vinyl Additive Technol., 2009, vol. 15, pp. 219–223.
Jiang, P., Zhang, S., Leng, Y., et al., Chem. Ind. Eng. Prog., 2012, vol. 5, p. 002.
Siling, M.I. and Laricheva, T.N., Russ. Chem. Rev., 1996, vol. 65, no. 3, pp. 279–286.
Yanfei, W., Baohua, H., Yanxiong, F., et al., Guangdong Chem. Ind., 2007, vol. 34, no. 7, p. 62.
Wassercheid, P. and Welton, T., Ionic Liquids in Synthesis, Wiley–VCH, 2002.
Kustov, L.M., Vasina, T.V., and Ksenofontov, V.A., Ross. Khim. Zh. (Zh. Ross. Khim. O–va. im. D.I. Mendeleeva), 2004, vol. 48, no. 6, pp. 13–35.
Clowdhury, S., Mohan, R.S., and Scott, J.L., Tetrahedron, 2007, vol. 63, pp. 2363–2389.
Rahman, M.P. and Brazel, C.S., Polym. Degrad. Stab., 2006, vol. 91, no. 12, pp. 3371–3382.
Wang, S. and Hou, L., Iran. Polym. J., 2011, vol. 20, no. 12, pp. 989–997.
Deyo, J.A., Food Chem. Toxicol., 2008, vol. 46, pp. 990–998.
Matsumoto, M., Hirata-Koizumi, M., and Ema, M., Regul. Toxicol. Pharm., 2008, vol. 37, pp. 49–54.
WO Patent 2013143824, Publ. 2013.
CN Pateent 103242164, Publ. 2013.
CN Patent 103435488, Publ. 2013.
CN Patent 103319346, Publ. 2013.
WO Patent 2014185872, Publ. 2014.
Fang, G. and Lin, J., Chem. Eng. Equip., 2011, vol. 9, p. 056.
CN Patent 102001948, Publ. 2010.
CN Patent 102329233, Publ. 2011.
CN Patent 102824929, Publ. 2014.
TW Patent 201437195, Publ. 2014.
US Patent 2010305255, Publ. 2010.
TW Patent I418540, Publ. 2013.
KR Patent 20130067512, Publ. 2013.
Aminova, G.K., Stepanova, L.B., Maskova, A.R., et al., Bashk. Khim. Zh., 2011, vol. 18, no. 1, pp. 147–151.
Aminova, G.K., Maskova, A.R., Builova, E.A., et al., Bashk. Khim. Zh., 2012, vol. 19, no. 1, pp. 118–121.
Aminova, G.K., Maskova, A.R., Nafikova, R.F., et al., Prom. Proizv. Ispol’z. Elastom., 2013, no. 2, pp. 40–46.
Mazitova, A.K., Aminova, G.K., Gabitov, A.I., et al., Bashk. Khim. Zh., 2015, vol. 22, no. 3, pp. 23–26.
CN Patent 102206156, Publ. 2011.
RF Patent 2404156, Publ. 2010.
Davydova, O.V., Karchevskii, S.G., Maidanova, I.O., et al., Bashk. Khim. Zh., 2010, vol. 17, no. 4, pp. 85–87.
Davydova, O.V., Lakeev, S.N., Kalimgulova, A.M., et al., Bashk. Khim. Zh., 2013, vol. 20, no. 4, pp. 95–98.
Davydova, O.V., Lakeev, S.N., Maidanova, I.O., et al., Prom. Proizv. Ispol’z. Elastom., 2013, no. 4, pp. 44–47.
CN Patent 101811970, Publ. 2010.
Xianwei, X., Detang, W., and Huan, L., Guangdong Chem. Ind., 2010, vol. 11, p. 034.
Guibao, L. and Yuesheng, B., Plastics Additives, 2013, vol. 2, p. 011.
Yuming, L. and Hongyan, M., Plastics Additives, 2011, vol. 5, p. 011.
US Patent 2011257317, Publ. 2011.
Liu, S.R., Bai, Y.G., Zhang, G.B., et al., China Plastics Ind., 2013, vol. 7, p. 027.
Xu, J., Sun, Y., and Liu, X., Guangzhou Chem. Ind., 2012, vol. 14, p. 042.
US Patent 8022244, Publ. 2011.
Yuan, P., Xiangfeng, G., and Lihua, J., Special. Petrochem., 2009, vol. 6, p. 014.
US Patent 2012035308, Publ. 2012.
US Patent 2012171397, Publ. 2012.
US Patent 2011160371, Publ. 2011.
US Patent 2013035431, Publ. 2013.
US Patent 2011184105, Publ. 2011.
US Patent 2014213709, Publ. 2014.
US Patent 2014212666, Publ. 2014.
US Patent 20140275605, Publ. 2014.
US Patent 2014316155, Publ. 2014.
US Patent 2014275606, Publ. 2014.
Zhang, L., Zhang, J., Ding, X., et al., Am. J. Biomed. Sci. Eng., 2015, vol. 1, no. 1, pp. 9–19.
Li, C.C., Jiang, P.P., Dong, Y.M., et al., Fine Chemicals, 2011, vol. 11, p. 024.
CN Patent 102775309, Publ. 2012.
Jiang, P.P., Li, C.C., Dong, Y.M., et al., J. Chem. Eng. Chin. Univ., 2013, vol. 2, p. 013.
Lian, J.W., Xia, J.L., Yang, X.H., et al., Modern Chem. Ind., 2011, vol. 12, p. 009.
Biermann, U., Jungbauer, A., and Metzger, J.O., Eur. J. Lipid Sci. Technol., 2012, vol. 114, no. 1, pp. 49–54.
Park, J.S., Oh, H.C., Park, Y.S., et al., Adv. Mater. Res., 2012, vol. 421, pp. 136–139.
Park, J.S., Yun, D.H., Ko, T.W., et al., Adv. Mater. Res., 2013, vol. 634, pp. 541–545.
Park, S.H., Park, J.S., Ko, T.W., et al., Adv. Mater. Res., 2013, vol. 634, pp. 642–646.
US Patent 2013171385, Publ. 2013.
US Patent 2014018568, Publ. 2014.
Hu, B., Fan, M., and Zhang, Z., Sci. Technol. Chem. Ind., 2010, vol. 6, p. 004.
Xu, J., Jiang, J., Wei, L.V., et al., Chem. Eng. Commun., 2010, vol. 198, no. 4, pp. 474–482.
Qiao, Y.H., Teng, J.J., Zhang, Q., et al., Chem. Reagents, 2010, vol. 11, p. 019.
Chang, Y., Ren, X.N., Zha, F., et al., Bull. Chin. Ceram. Soc., 2011, vol. 1, p. 044.
Zhifeng, Z., Junming, X., Jianchun, J., et al., Bull. Chem. Soc. Ethiop., 2011, vol. 25, no. 1, pp. 147–150.
Lin, Q., Chen, X., and Su, Y., Appl. Chem. Ind., 2012, vol. 5, p. 031.
Hao, Y., Jianhong, W., Yong, L., et al., Guangdong Chem. Ind., 2012, vol. 2, p. 003.
Wang, J., Liu, W., and Dong, J., Polyvinyl Chloride, 2012, vol. 1, p. 005.
Xiaohong, W., Plastics Additives, 2012, vol. 2, p. 014.
Teng, J., Qiao, Y., and Huang, X., Ind. Catal., 2010, vol. 2, p. 032.
Li, Y., Ma, H., and Deng, F., China Plastics Ind., 2012, vol. 10, p. 005.
Wang, B. and Cheng, J., Technol. Develop. Chem. Ind., 2012, vol. 10, p. 004.
Junming, X.U., Jianchun, J., Zhiyue, Z., et al., Process Safety Environ. Prot., 2010, vol. 88, no. 1, pp. 28–30.
Liu, X. and Zeng, Y., Guangzhou Chem. Ind., 2011, vol. 4, p. 030.
Guo, J.H., Cu, J.F., Zhou, Y.P., et al., China Plastics Ind., 2011, vol. 2, p. 027.
Zhi-Qiang, W. and Fei, Y., Chin. J. Spectrosc. Lab., 2010, vol. 4, p. 076.
US Patent 2013274389, Publ. 2013.
Stuart, A., McCallum, M.M., Fan, D., et al., Polym. Bull., 2010, vol. 65, no. 6, pp. 589–598.
Stuart, A., LeCaptain, D.J., Lee, C.Y., et al., Eur. Polym. J., 2013, vol. 49, no. 9, pp. 2785–2791.
EP Patent 2691362, Publ. 2014.
Chaudhary, B.I., Nguyen, B.D., Smith, P., et al., Polym. Eng. Sci., 2015, vol. 55, no. 3, pp. 634–640.
Ye, J., Liu, S., Xiang, J., et al., J. Appl. Polym. Sci., 2013, vol. 129, no. 4, pp. 1915–1921.
US Patent 2011098390, Publ. 2011.
US Patent 8163825, Publ. 2012.
US Patent 8299281, Publ. 2012.
US Patent 2010159177, Publ. 2010.
US Patent 2011151162, Publ. 2011.
Feng, G-d., Hu, Y., Xu, B., et al., J. Forest Prod. Ind., 2014, vol. 3, no. 2, pp. 100–105.
Galli, F., Nucci, S., Pirola, C., et al., Chem. Eng. Trans., 2014, vol. 37, pp. 601–607.
US Patent 8557139, Publ. 2013.
Wancong, S.A., Plastics Additives, 2011, vol. 1, p. 004.
Fogassy, G., Ke, P., Figueras, F., et al., Appl. Catal. A: General, 2011, vol. 393, no. 1, pp. 1–8.
US Patent 2015057397, Publ. 2015.
US Patent 8703849, Publ. 2014.
Mehta, B., Kathalewar, M., and Mantri, J., Res. Rev.: J. Eng. Technol., 2014, vol. 3, no. 4, pp. 20–30.
Da Silva, M.A., Vieira, M.G.A., Maçumoto, A.C.G., et al., Polym. Test., 2011, vol. 30, pp. 478–484.
Sanderson, R.D., Schneider, D.F., and Schreuder, I., J. Аppl. Polym. Sci., 1994, vol. 53, pp. 1785–1793.
Sanderson, R.D., Schneider, D.F., and Schreuder, I., J. Appl. Polym. Sci., 1995, vol. 55, pp. 1837–1846.
US Patent 2012202725, Publ. 2012.
EP Patent 2723749, Publ. 2014.
EP Patent 2794614, Publ. 2014.
Yin, B. and Hakkarainen, M., J. Appl. Polym. Sci., 2011, vol. 119, no. 4, pp. 2400–2407.
Yin, B., Aminlashgari, N., Yang, X., et al., Eur. Polym. J., 2014, vol. 58, pp. 34–40.
Yin, B. and Hakkarainen, M., Waste Biomass Valor., 2014, vol. 5, no. 4, pp. 651–659.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Original Russian Text © S.N. Lakeev, I.O. Maydanova, R.F. Mullakhmetov, O.V. Davydova, 2016, published in Zhurnal Prikladnoi Khimii, 2016, Vol. 89, No. 1, pp. 3-18.
Rights and permissions
About this article
Cite this article
Lakeev, S.N., Maydanova, I.O., Mullakhmetov, R.F. et al. Ester plasticizers for polyvinyl chloride. Russ J Appl Chem 89, 1–15 (2016). https://doi.org/10.1134/S1070427216010018
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427216010018