Abstract
The process of making R6M5 steel by remelting with oxygen blowing in a 20-t electric arc furnace is considered. To improve the technical-and-economic indices of the furnace operation, the following measures are tested on a series of pilot heats: the introduction of oxygen under the metal melt surface in a molten-metal bath using a consumable uncooled tube and heating of the scrap in a charging bucket by effluent gases to a temperature of 250–370°C. These measures lead to a decrease in the heat time, the metal loss, and the specific consumption of electric power and oxygen.
Similar content being viewed by others
REFERENCES
A. M. Bigeev and V. A. Bigeev, Metallurgy of Steel (Izd. MGTU, Magnitogorsk, 2000).
A. N. Makarov and A. D. Svenchanskii, Optimum Thermal Conditions in Electric Arc Furnaces. Library of Electric Heat Treater (Energoatomizdat, Moscow, 1992).
V. G. Voskoboinikov, V. A. Kudrin, and A. M. Yakushev, General Metallurgy (Metallurgiya, Moscow, 2000).
O. M. Sosonkin, S. I. Gertsyk, and M. V. Shishimirov, “Method of steelmaking in an electric arc furnace and a device for its implementation,” RF Patent 2309182, Byull. Izobret., No. 30 (2007).
https://metallurgy.zp.ua/raskislenie-metalla-v-vosstanovitelnyj-period. Cited February 18, 2019.
V. A. Kudrin, Theory and Practice of Steelmaking (Mir, Moscow, 2003).
1. V. I. Yavoiskii et al., Metallurgy of Steel (Metallurgiya, Moscow, 1983).
E. V. Protopopov and L. A. Ganzer, Calculation of Steel Deoxidation and Degassing during Ladle Degassing: A Tutorial (SibGIU, Novokuznetsk, 2000).
E. F. Vegman, B. N. Zhereb’ev, A. N. Pokhvisnev, et al., Metallurgy of Steel (IKTs Akademkniga, Moscow, 2004).
A. F. Kablukovskii, Production of Steel and Ferroalloys in Electric Arc Furnaces (Metallurgiya, Moscow, 1991).
A. V. Ryabov, Material Balance Calculation: A Tutorial (Izd. YuUrGU, Chelyabinsk, 2002).
O. M. Sosonkin and V. A. Kudrin, Water-Cooled Roof of an Electric Arc Furnace (Metallurgiya, Moscow, 1985).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Gertsyk, S.I., Korolev, M.R. & Shil’nikov, E.V. Improvement of the Electric Arc Furnace Manufacture of R6M5 Steel. Russ. Metall. 2019, 1245–1249 (2019). https://doi.org/10.1134/S0036029519120085
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029519120085