Abstract
The following results of studying electric discharges over a wide pressure range and designing technological equipment based on these results and performed in Bauman Moscow State Technical University are presented: a magnetically controlled argon torch for welding, soldering, and heat treatment; a small electric arc melting furnace; and technology and equipment for the cleaning of metallic articles from contaminations and for reaching the required surface roughness according to a functional purpose.
Similar content being viewed by others
REFERENCES
M. F. Zhukov, N. P. Kozlov, and A. V. Pustogarov, Near-Electrode Processes in Arc Discharges (Nauka, Novosibirsk, 1982).
M. Yu. Dokukin, V. N. Anikeev, and V. I. Khvesyuk, “Magnetic controlled hollow cathode arc discharge,” in Proceedings Conference on Controlled Fusion and Plasma Physics (European Physical Society, 1998), Vol. 22, pp. 2730–2732.
M. F. Zhukov, N. P. Kozlov, M. Yu. Dokukin, et al., “Functional diagnostics of low-temperature plasma,” Izv. Sib. Otd. Akad. Nauk SSSR, Ser. Tekhn. Nauk 1 (4), 24–25 (1985).
V. N. Anikeev, M. Yu. Dokukin, A. M. Zimin, et al., “Method of controlling the vacuum arc discharge current with a consumable hollow cathode and the related device,” Byull. Izobret., No. 15 (1994).
I. E. Lapin, “Increasing the technological properties of an arc in welding with a nonconsumable electrode in an inert gas,” Doctoral (Eng.) Dissertation, Volgograd: VGTU, 2004.
B. Bowman and K. Kruger, Arc Furпace Physics (Stahleisen Communications, Hamburg, 2010).
V. N. Anikeev, “Low-pressure arc hot cathodes in inert gases,” Izv. Sib. Otd. Akad. Nauk SSSR, Ser. Tekhn. Nauk 4 (3), 60–67 (1981).
V. N. Anikeev, M. Yu. Dokukin, and V. I. Khvesyuk, “Electric arc smelting in the range of pressures from 1.3 × 103 to 1.5 × 105 Pa,” J. Vac. Soc. Japan 38 (Suppl.), 293 (1995).
V. N. Anikeev, M. Yu. Dokukin, and V. I. Khvesyuk, “Small size electric arc melting furnace,” in Proceedings of Conference on Controlled Fusion and Plasma Physics (European Physical Society, Praha, 1998), Vol. 22, pp. 2749–2752.
V. N. Anikeev, M. Yu. Dokukin, V. I. Khvesyuk, and P. A. Tsygankov, “Electric arc furnace, electrode unit, and a method of electric arc melting,” RF Patent 2184160, Byull. Izobret., No. 18 (2002).
V. N. Anikeev and M. Yu. Dokukin, “Research of influence of mobile cathodic stains of the vacuum arc for reception of the adjustable roughness of metal surfaces,” J. Phys.: Conf. Series 830 (2017). https://doi.org/10.1088/1742-6596/830/1/012075
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Anikeev, V.N., Dokukin, M.Y. Electric Arc Vacuum Technologies and the Related Equipment. Russ. Metall. 2019, 576–580 (2019). https://doi.org/10.1134/S0036029519060053
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029519060053