Abstract
The primary radiation damage of a binary FeCr alloy deformed by applied mechanical loading is studied by an atomistic molecular dynamics simulation. Loading is simulated by specifying an applied pressure of 0.25, 1.0, and 2.5 GPa of both signs. Hydrostatic and uniaxial loading is considered along the [001], [111], [112], and [210] directions. The influence of loading on the energy of point defect formation and the threshold atomic displacement energy in single-component bcc iron is investigated. The 10-keV atomic displacement cascades in a “random” binary Fe–9 at % Cr alloy are simulated at an initial temperature of 300 K. The number of the point defects generated in a cascade is estimated, and the clustering of point defects and the spatial orientation of interstitial configurations are analyzed. Our results agree with the results of other researchers and supplement them.
Similar content being viewed by others
References
J. F. Bates and E. R. Gilbert, “Experimental evidence for stress enhanced swelling,” J. Nucl. Mater. 59, 95–102 (1976).
J. F. Bates and E. R. Gilbert, “Effects of stress on swelling in 316 stainless steel,” J. Nucl. Mater. 71, 286–292 (1978).
V. S. Neustroev, S. V. Belozerov, E. I. Makarov, and A. V. Obuhov, “Effect of tensile and compresive stresses on the evolution of vacancy porosity in the Fe–18% Cr–10% Ni–Ti steel irradiated in BOR-60 reactor,” Phys. Met. Metallogr. 115 (10), 1007–1011 (2014).
B. Z. Margolin, A. I. Murashova, and V. S. Neustroev, “Effect of stresses on the radiation swelling of austenitic steels,” Vopr. Materialoved., No. 4(68), 124–139 (2011).
S. Miyashiro, S. Fujita, and T. Okita, “MD simulations to evaluate the influence of applied normal stress or deformation on defect production rate and size distribution of clusters in cascade process for pure Cu,” J. Nucl. Mater. 415, 1–4 (2011).
S. Di, Z. Yao, M. Daymond, and F. Gao, “Molecular dynamics simulations of irradiation cascades in alphazirconium under macroscopic strain,” Nucl. Instr. Meth. B 303, 95–99 (2013).
A. V. Korchuganov, K. P. Zol’nikov, D. S. Kryzhevich, V. M. Chernov, and S. G. Psakh’e, “Simulation of the nucleation of plastic deformation in mechanically loaded crystals during a radiation action,” VANT, Ser. Termoyadernyi Sintez 38 (1), 42–48 (2015).
F. Gao, D. Bacon, P. Flewitt, and T. Lewis, “The influence of strain on defect generation by displacement cascades in alpha-iron,” Nucl. Instr. Meth. B 180, 187–193 (2001).
B. Beeler, M. Asta, P. Hosemann, and N. Grønbech- Jensen, “Effects of applied strain on radiation damage generation in body-centered cubic iron,” J. Nucl. Mater. 459, 159–165 (2015).
S. Miyashiro, S. Fujita, T. Okita, and H. Okuda, “MD simulations to evaluate effects of applied tensile strain on irradiation-induced defect production at various PKA energies,” Fusion Engineering and Design 87(7–8), 1352–1355 (2012).
M. F. Finnis and J. E. Sinclair, “A simple empirical N-body potential for transition metals,” Philos. Mag. A 50, 45–55 (1984).
G. J. Ackland, M. I. Mendelev, D. J. Srolovitz, S.W. Han, and A. V. Barashev, “Development of an interatomic potential for phosphorus impurities in a-iron,” J. Phys.: Condens. Matter 16, S2629–S2642 (2004).
E. E. Bloom, S. J. Zinkle, and F. W. Wiffen, “Materials to deliver the promise of fusion power—progress and challenges,” J. Nucl. Mater. 329–333, 12–19 (2004).
L. K. Mansur, A. F. Rowcliffe, R. K. Nanstad, S. J. Zinkle, W. R. Corwin, and R. E. Stoller, “Materials needs for fusion, generation IV fission reactors and spallation neutron sources—similarities and differences,” J. Nucl. Mater. 329–333, 166–172 (2004).
N. Baluc, “Materials for fusion power reactors,” Plasma Phys. Control. Fusion 48, B165–B178 (2006).
A. Caro, D. A. Crowson, and M. Caro, “Classical many-body potential for concentrated alloys and the inversion of order in iron–chromium alloys,” Phys. Rev. Lett. 95, 0757021–0757024 (2005).
J. Wallenius, P. Olsson, C. Lagerstedt, N. Sandberg, R. Chakarova, and V. Pontikis, “Modeling of chromium precipitation in Fe–Cr alloys,” Phys. Rev. B 69, 0941031–0941039 (2004).
M. Tikhonchev, V. Svetukhin, and E. Gaganidze, “MD simulation of atomic displacement cascades near chromium-rich clusters in FeCr alloy,” J. Nucl. Mater. 442, S618–S623 (2013).
P. Olsson, I. A. Abrikosov, L. Vitos, and J. Wallenius, “Ab initio formation energies of Fe–Cr alloys,” J. Nucl. Mater. 321, 84–90 (2003).
M. Tikhonchev, V. Svetukhin, A. Kadochkin, and E. Gaganidze, “MD simulation of atomic displacement cascades in Fe–10 at. % Cr binary alloy,” J. Nucl. Mater. 395, 50–57 (2009).
K. Nordlund, J. Wallenius, and L. Malerba, “Molecular dynamics simulations of threshold displacement energies in Fe,” Nucl. Instr. Met. Phys. Res. B 246(2), 322–332 (2006).
L. Malerba, D. Terentyev, P. Olsson, R. Chakarova, and J. Wallenius, “Molecular dynamics simulation of displacement cascades in Fe–Cr alloys,” J. Nucl. Mater. 329–333, 1156–1160 (2004).
D. A. Terentyev, L. Malerba, R. Chakarova, K. Nordlund, P. Olsson, M. Rieth, and J. Wallenius, “Displacement cascades in Fe–Cr: a molecular dynamics study,” J. Nucl. Mater. 349, 119–132 (2006).
D. Terentyev, P. Olsson, T. P. C. Klaver, and L. Malerba, “On the migration and trapping of single self-interstitial atoms in dilute and concentrated Fe-Cr alloys: atomistic study and comparison with resistivity recovery experiments,” Comput. Mater. Sci. 43, 1183–1192 (2008).
K. Vörtler, C. Björkas, D. Terentyev, L. Malerba, and K. Nordlund, “The effect of Cr concentration on radiation damage in Fe–Cr alloys,” J. Nucl. Mater. 382, 24–30 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.Yu. Tikhonchev, V.V. Svetukhin, 2017, published in Metally, 2017, No. 3, pp. 43–53.
Rights and permissions
About this article
Cite this article
Tikhonchev, M.Y., Svetukhin, V.V. Primary radiation damage of an FeCr alloy under pressure: Atomistic simulation. Russ. Metall. 2017, 397–405 (2017). https://doi.org/10.1134/S003602951705010X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S003602951705010X