Abstract
Linear voltammetry is used to study the anodic behavior of a VR20 alloy in sodium hydroxide solutions, and the possibility of high-rate dc electrochemical dissolution of this alloy is shown. Experimental dependences of the rate of alloy dissolution and the anode current efficiency on the anode current density are determined, and the electric power consumed for alloy dissolution under optimum conditions is determined in large-scale tests. Potassium perrhenate is removed from the formed electrolyte as an intermediate product to form perrhenic acid. The main characteristics of the electrodialysis conversion of the synthesized potassium perrhenate into perrhenic acid with a concentration of 591 g/L electrolyte are determined. A technological scheme is proposed for the recovery of rhenium from the wastes of a W–Re alloy in the form of perrhenic acid.
Similar content being viewed by others
References
A. A. Palant, I. D. Troshkina, A. M. Chekmarev, and A. I. Kostylev, Technology of Rhenium (OOO Galleya-Print, Moscow, 2015).
L. Z. Bykhovskii and L. P. Tigunov, “Strategic mineral raw materials: ways of solving the problem of deficiency,” Mineral. Res. Rossii. Ekonomika Upravl., No. 5, 43–49 (2015).
L. Ya. Agapova, Z. S. Abisheva, S. K. Kilibaeva, A. N. Altenova, G. S. Ruzakhunova, and I. A. Sapukov, “Combined processing of technical tungsten–rhenium-containing wastes,” in Proceedings of Conference on Advanced Methods of Beneficiation and Combined Processing of Natural and Technical Mineral Raw Materials (Almaty, 2014), pp. 361–363.
T. B. Elemesov, O. V. Chernyshova, D. T. Shakirova, D. V. Drobot, and P. S. Dzhumaev, “Electrochemical dissolution of tungsten–rhenium-containing alloys,” Tonkie Khim. Tekhn. 10 (2), 53–60 (2015).
A. A. Palant, V. A. Bryukvin, A. M. Levin, and O. M. Levchuk, “Electrochemical processing of the metallic wastes of nonferrous and rare metals,” in Proceedings of Conference on 75th Anniversary of Baikov Institute of Metallurgy and Materials Science, Ed. by K. A. Solntsev (Interkontakt Nauka, Moscow, 2013), рр. 176–182.
V. P. Guro and A. A. Belov, “Repeated removal of ammonium perrhenate and the recovery of rhenium from the wastes of rhenium-containing alloys,” in Proceedings of Conference on Resource-Recycling, Low- Waste, and Nature-Saving Technologies of Land Reclamation (Ust’-Kamenogorsk, 2012), pp. 165–166.
N. V. Petrushin, O. G. Ospennikova, and E. S. Elyutin, “Rhenium in single-crystal nickel superalloys for gas turbine engine blades,” Aviats. Mater. Tekhn., No. S5, 5–16 (2014).
Cheng Tingyu, Xiong Ning, Peng Kaiyuan, Yang Haibing, and Yin Jingchuan, “Technology of production and application of rhenium and its alloys,” Rare Metal Mater. Eng. 38 (2), 373–376 (2009).
R. P. Singh Gaur, T. A. Wolfe, and S. A. Braymiller, “Recycling of rhenium-containing wire scrap?” Intern. J. Refract. Metals Hard Mater. 50, 79–85 (2015).
E. Fleischmann, M. K. Miller, E. Affeldt, and U. Glatzel, “Quantitative experimental determination of the solid solution hardening potential of rhenium, tungsten and molybdenum in single-crystal nickelbased superalloys,” Acta Materialia 87 (1), 350–356 (2015).
J. D. Lessard, D. G. Gribbin, and L. N. Shekhter, “Recovery of rhenium from molybdenum and copper concentrates during the looping sulfide oxidation process,” Intern. J. Refract. Metals Hard Mater. 44, 1–6 (2014).
O. M. Levchuk, A. A. Palant, V. A. Bryukvin, et al., “Electrochemical ac processing of the wastes of refractory rare metals,” Tsvetn. Met., No. 5, 29–35 (2011).
S. N. Aitekeeva, “Electrochemical processing of rhenium–tungsten-containing wastes and the fabrication of tungsten–rhenium coatings,” Kompleks. Isp. Miner. Syr’ya, No. 5–6 (212–213), 27–30 (2000).
A. A. Palant, A. M. Levin, V. A. Bryukvin, et al., “Electrodialysis synthesis of concentrated solutions of perrhenic acid,” Tsvetn. Met., No. 11, 62–64 (2010).
A. A. Palant, V. A. Bryukvin, A. M. Levin, et al., “Combined synthesis of perrhenic acid solutions,” Elektrometallurgiya, No. 7, 23–25 (2011).
E. M. Savitskii and M. A. Tylkina, “State of the problem of rhenium nd new trends in designing alloys,” in Study and Application of Rhenium Alloys (IMET, Moscow, 1975).
Phase Diagrams of Binary Metallic Alloys: A Handbook, Ed. by N. P. Lyakishev (Mashinostroenie, Moscow, 2000), Vol. 3, Part 2.
A. T. Vas’ko and S. K. Kovach, Electrochemistry of Refractory Metals (Tekhnika, Kiev, 1983).
A. G. Atanasyants, Anodic Behavior of Metals (Metallurgiya, Moscow, 1987).
A. A. Palant, O. M. Gracheva, and V. A. Bryukvin, “Electrochemical processing of the metallic wastes of rhenium in ammonia electrolytes using a symmetric alternating current,” Elektrometallurgiya, No. 3, 24–27 (2007).
S. F. Belov, M. S. Igumnov, and A. M. Levin, “Anodic dissolution of tungsten in sodium hydroxide in the presence of NH4 +, SO4 2- and CO3 2- ions,” Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., No. 1, 124–127 (1991).
A. A. Palant and V. A. Pavlovskii, “Physicochemical and technological fundamentals of electrochemical processing of the wastes of metallic tungsten,” Tekhnologiya Metallov, No. 11, 3–7 (2003).
A. M. Levin and O. M. Levchuk, “Electrical conductivity of ammonia solutions containing rhenium (VII),” Russian Metallurgy (Metally), No. 9, 692–695 (2014).
O. M. Levchuk and A. M. Levin, “Effect of a dc magnetic field on the electrical conductivity of ammonia solutions containing tungsten(VI) and rhenium(VII) ions,” Russian Metallurgy (Metally), No. 1, 23–27 (2015).
A. Afifi and S. Azen, Statistical Analysis (Academic Press, New York, 1979).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Levin, O.M. Levchuk, 2017, published in Metally, 2017, No. 1, pp. 55–62.
Rights and permissions
About this article
Cite this article
Levin, A.M., Levchuk, O.M. Electrochemical recovery of rhenium from W–Re alloys in the form of perrhenic acid: I. Fundamentals of the process. Russ. Metall. 2017, 47–53 (2017). https://doi.org/10.1134/S0036029517010074
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029517010074