Abstract
Anodizing of aluminum in acidic electrolytes leads to the formation of porous oxide films on the metal surface. Heat treatment is one of possible ways to control the functional properties of this material. In this work, anodizing of aluminum alloy A5005 in a 0.3 M solution of sulfuric acid was carried out in the kinetic mode. A multi-stage heat treatment protocol has been proposed that allows controlled two-stage crystallization of as-prepared amorphous anodic alumina with preservation of the porous structure. At the first stage, anodic alumina crystallizes into a mixture of low-temperature Al2O3 polymorphs, accompanied by the removal of electrolyte impurities from its structure and an increase in the specific surface area to 42 m2/g due to the formation of a mesoporous structure. Subsequent heat treatment at 1200°C leads to the formation of α-Al2O3 films with an average grain size of 4 μm, with preservation of a porous structure with an average pore diameter of 26 nm. The crystallization of as-prepared amorphous anodic alumina results in an increase in its chemical stability by several orders of magnitude, which makes it possible to use the developed methods for creating membranes capable of functioning in aggressive media and catalyst carriers.
Similar content being viewed by others
REFERENCES
E. A. Chernova, D. I. Petukhov, O. O. Kapitanova, et al., Nanosyst. Phys. Chem. Math. 9, 614 (2018). https://doi.org/10.17586/2220-8054-2018-9-5-614-621
I. V. Roslyakov, D. I. Petukhov and K. S. Napolskii, Nanotechnology 32, 33LT01 (2021). https://doi.org/10.1088/1361-6528/ABFEEA
A. A. Mistonov, I. S. Dubitskiy, A. H. Elmekawy et al., Phys. Solid State 63, 1058 (2021). https://doi.org/10.1134/S1063783421070179
I. I. Ryzhkov, I. A. Kharchenko, E. V. Mikhlina et al., Int. J. Heat Mass Transf. 176, 121414 (2021). https://doi.org/10.1016/J.IJHEATMASSTRANSFER.2021.121414
A. D. Davydov and V. M. Volgin, Russ. J. Electrochem. 52, 806 (2016). https://doi.org/10.1134/S1023193516090020
R. G. Valeev, A. L. Trigub, A. N. Beltiukov et al., J. Synch. Investig. 13, 92 (2019). https://doi.org/10.1134/S1027451019010373
I. V. Gasenkova, I. M. Andrukhovich and V. V. Tkachev, J. Synch. Investig. 2019 13, 700 (2019). https://doi.org/10.1134/S1027451019040232
A. N. Kokatev, I. V. Lukiyanchuk, N. M. Yakovleva et al., Prot. Met. Phys. Chem. Surf. 52, 832 (2016). https://doi.org/10.1134/S2070205116050130
I. V. Roslyakov, I. V. Kolesnik, P. V. Evdokimov et al., Sens. Actuators, B 330, 129307 (2021). https://doi.org/10.1016/J.SNB.2020.129307
N. K. Ibrayev, A. K. Zeinidenov, A. K. Aimukhanov and K. S. Napolskii, Quantum Electron. 45, 663 (2015). https://doi.org/10.1070/QE2015V045N07ABEH015533
A. R. Pomozov, I. A. Kolmychek, E. A. Gan’shina et al., Phys. Solid State 60, 2264 (2018). https://doi.org/10.1134/S1063783418110264
K. S. Napolskii, A. A. Noyan and S. E. Kushnir, Opt. Mater. 109, 110317 (2020). https://doi.org/10.1016/J.OPTMAT.2020.110317
A. P. Leontiev, I. V. Roslyakov, A. S. Vedeneev and K. S. Napolskii, J. Synch. Investig. 10, 548 (2016). https://doi.org/10.1134/S1027451016030113
I. V. Roslyakov, D. S. Koshkodaev, V. A. Lebedev and K. S. Napolskii, J. Synch. Investig. 13, 955 (2019). https://doi.org/10.1134/S1027451019050343
L. Zaraska, G. D. Sulka, J. Szeremeta and M. Jaskuła, Electrochim. Acta 55, 4377 (2010). https://doi.org/10.1016/J.ELECTACTA.2009.12.054
S. V. Grigor’ev, N. A. Grigor’eva, A. V. Syromyatnikov et al., JETP Lett. 85, 449 (2007). https://doi.org/10.1134/S0021364007090081
J. M. Montero-Moreno, M. Sarret and C. Müller, Microporous Mesoporous Mater. 136, 68 (2010). https://doi.org/10.1016/J.MICROMESO.2010.07.022
C.-K. Chung, M.-W. Liao, C.-T. Lee and H.-C. Chang, Nanoscale Res. Lett. 6, 596 (2011). https://doi.org/10.1186/1556-276X-6-596
W. J. Stepniowski, J. Choi, H. Yoo et al., J. Electroanal. Chem. 771, 37 (2016). https://doi.org/10.1016/J.JELECHEM.2016.04.010
K. V. Stepanova, N. M. Yakovleva, A. N. Kokatev and H. Pettersson, J. Synch. Investig. 10, 933 (2016). https://doi.org/10.1134/S102745101605013X
A. E. Kozhukhova, S. P. du Preez and D. G. Bessarabov, Surf. Coat. Technol. 383, 125234 (2020). https://doi.org/10.1016/J.SURFCOAT.2019.125234
C. C. Chen, J. H. Chen and C. G. Chao, Jpn. J. Appl. Phys. 44, 1529 (2005). https://doi.org/10.1143/JJAP.44.1529
E. O. Gordeeva, I. V. Roslyakov, A. I. Sadykov et al., Russ. J. Electrochem. 54, 990 (2018). https://doi.org/10.1134/S1023193518130165
G.W.H. Höhne, W.F. Hemminger and H.-J. Flammersheim, Differential Scanning Calorimetry (Springer Berlin Heidelberg, 2003): p. 115. https://doi.org/10.1007/978-3-662-06710-9_5
E. P. Barrett, L. G. Joyner and P. P. Halenda, J. Am. Chem. Soc. 73, 373 (1951). https://doi.org/10.1021/JA01145A126
C. A. Schneider, W. S. Rasband and K. W. Eliceiri, Nat. Methods 9, 671 (2012). https://doi.org/10.1038/nmeth.2089
http://www.eng.fnm.msu.ru/en/software/.
S. Y. Cho, J. W. Kim and S. D. Bu, J. Korean Phys. Soc. 66, 1394 (2015). https://doi.org/10.3938/JKPS.66.1394
M. E. Mata-Zamora and J. M. Saniger, Rev. Mex. Fis. 51, 502 (2005).
S. V. Tsybulya and G. N. Kryukova, Phys. Rev. B 77, 024112 (2008). https://doi.org/10.1103/PhysRevB.77.024112
A. I. Vorob’eva, D. L. Shimanovich and O. A. Sycheva, Russ. Microelectron. 47, 40 (2018). https://doi.org/10.1134/S1063739718010080
I. V. Roslyakov, N. A. Shirin, M. V. Berekchiian et al., Microporous Mesoporous Mater. 294, 109840 (2020). https://doi.org/10.1016/J.MICROMESO.2019.109840
I. V. Gasenkova and E. V. Ostapenko, J. Synch. Investig. 7, 536 (2013). https://doi.org/10.1134/S1027451013030245
I. V. Roslyakov, K. S. Napolskii, P. V. Evdokimov et al., Nanosyst.: Phys. Khim. Mat. 4, 120 (2013). http://mi.mathnet.ru/eng/nano/v4/i1/p120.
T. Masuda, H. Asoh, S. Haraguchi and S. Ono, Materials 8, 1350 (2015). https://doi.org/10.3390/MA8031350
K. Chernyakova, R. Karpicz, D. Rutkauskas, I. Vrublevsky and A. W. Hassel, Phys. Status Solidi 215, 1700892 (2018). https://doi.org/10.1002/PSSA.201700892
I. V. Roslyakov, I. V. Kolesnik, E. E. Levin et al., Surf. Coat. Technol. 381, 125159 (2020). https://doi.org/10.1016/J.SURFCOAT.2019.125159
P. P. Mardilovich, A. N. Govyadinov, N. I. Mukhurov, A. M. Rzhevskii and R. Paterson, J. Membr. Sci. 98, 131 (1995). https://doi.org/10.1016/0376-7388(94)00184-Z
P. P. Mardilovich, A. N. Govyadinoy, N. I. Mazurenko and R. Paterson, J. Membr. Sci. 98, 143 (1995). https://doi.org/10.1016/0376-7388(94)00185-2
A. I. Sadykov, A. P. Leontev, S. E. Kushnir, A. V. Lukashin and K. S. Napolskii, Russ. J. Inorg. Chem. 66, 258 (2021). https://doi.org/10.1134/S0036023621020182
C.-W. Lee, H.-S. Kang, Y.-H. Chang and Y.-M. Hahm, Korean J. Chem. Eng. 17, 266 (2000). https://doi.org/10.1007/BF02699038
A. Santos, T. Kumeria, Y. Wang and D. Losic, Nanoscale 6, 9991 (2014). https://doi.org/10.1039/C4NR01422G
ACKNOWLEDGMENTS
The authors are grateful for the support of the Interdisciplinary Scientific and Educational School of Lomonosov Moscow State University “The future of the planet and global environmental change.” SEM images were obtained using the equipment of the Joint Research Centre for Physical Methods of Research of the Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences. The X-ray powder diffraction, STA, and nitrogen capillary condensation methods were implemented using equipment purchased by Lomonosov Moscow State University Program of Development.
Funding
The study was supported by the Russian Foundation for Basic Research (grant no. 19-33-60088).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by V. Avdeeva
Rights and permissions
About this article
Cite this article
Shirin, N.A., Roslyakov, I.V., Berekchiian, M.V. et al. Thermal Modification of Porous Oxide Films Obtained by Anodizing of Aluminum–Magnesium Alloy. Russ. J. Inorg. Chem. 67, 926–933 (2022). https://doi.org/10.1134/S0036023622060262
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036023622060262