Abstract
Within the framework of this work, a new method for tensile fatigue testing of thin microwires and wires has been developed in accordance with GOST 25.502-79. The developed method has been tested on amorphous microwires of composition Fe77.5Si7.5B15 in glass insulation. It has been established that the deformation mode in the stress range from 0 to 700 MPa corresponds to the long-term use of the studied microwires (millions of cycles). In addition, the studied microwires are capable of withstanding hundreds of thousands of tensile cycles at stresses from 700 to 1100 MPa.
Similar content being viewed by others
REFERENCES
Vazquez, M., Gomez-Polo, C., Chen, D.-X., and Hernando, A., IEEE Trans. Magn., 1994, vol. 30, pp. 907–912. https://doi.org/10.1109/20.312442
Churyukanova, M., Kaloshkin, S., Shuvaeva, E., Stepashkin, A., Zhdanova, M., Aronin, A., Aksenov, O., Arakelov, P., Zhukova, V., and Zhukov, A., J. Alloys Compd., 2018, vol. 748, p. 199–205. https://doi.org/10.1016/j.jallcom.2018.02.342
Vazquez, M. and Andenote-Engelvin, A.-L., J. Magn. Magn. Mater., 2009, vol. 321, pp. 2066–2073. https://doi.org/10.1016/j.jmmm.2008.10.040
Aksenov, O.I., Abrosimova, G.E., Aronin, A.S., Orlova, N.N., Churyukanova, M.N., Zhukova, V.A., and Zhukov, A.P., J. Appl. Phys., 2017, vol. 122, p. 235103. https://doi.org/10.1063/1.5008957
Luborsky, F., Amorphous Metallic Alloys, London: Butterworths, 1983.
GOST (State Standard) no. 25.502-79: Strength Analysis and Testing in Machine Building. Methods of Metals Mechanical Testing. Methods of Fatigue Testing, Moscow: Standartinform, 2005.
Kostin, P.P., Fiziko-mekhanicheskie ispytaniya metallov, splavov intermetallicheskikh materialov (Physical and Mechanical Tests of Metals, Alloys of Intermetallic Materials), Moscow: Mashinostroenie, 1990.
Aksenov, O.I., Orlova, N.N., and Aronin, A.S., Instrum. Exp. Tech., 2019, vol. 62, no. 5, pp. 723–725. https://doi.org/10.1134/S0020441219050105
Bansal, N.P. and Doremus, R.H., Handbook of Glass Properties, Amsterdam: Elsevier, 1986.
Funding
The work was carried out within the framework of the state task of the Institute of Solid-State Physics, Russian Academy of Sciences.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aksenov, O.I., Fuks, A.A., Volkov, N.A. et al. Fatigue Testing Method for Thin Wires. Instrum Exp Tech 66, 488–491 (2023). https://doi.org/10.1134/S002044122302001X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S002044122302001X