Abstract
The triethylamine promoted stepwise 1,3-dipolar cycloaddition reaction of N-phenacylbenzothiazolium bromides with nitroalkenes in ethanol resulted in a mixture of two isomeric tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles with cis/trans/cis- and all-trans-configurations. More importantly, the corresponding dihydrobenzo[d]pyrrolo[2,1-b]thiazoles can be selectively prepared in refluxing ethanol and the benzo[d]pyrrolo[2,1-b]thiazoles can be obtained in satisfactory yields by sequential dehydrogenation with DDQ as oxidizer. On the other hand, the similar cycloaddition reaction of N-phenacylbenzothiazolium bromides with 1-methy-1-nitroalkenes in refluxing ethanol afforded benzo[d]pyrrolo[2,1-b]thiazoles with splitting out of nitro group. The stereochemistry of the spiro compounds was clearly elucidated on the basis of NMR spectra and sixteen single crystal structures.
Similar content being viewed by others
Introduction
Pyrrolo[2,1-b]thiazole and its polyhydro- derivatives is one of the privileged N,S-containing heterocyclic motif that forms the core structure of many pharmacological reagents. It has been reported that pyrrolo[2,1-b]thiazole derivatives have been used as hepatoprotective, antidiabetic, antibiotic, anticonvulsant, antiinflammatory, bactericides and antitumor agents1,2,3,4,5,6. Therefore, many efficient synthetic methods have been exploited for the synthesis of diverse pyrrolo[2,1-b]thiazole and its bezno- derivatives7,8,9,10,11,12,13,14,15,16,17. In recent years, the development of new and efficient methods for their syntheses remains an attractive area for synthetic and medicinal chemists18,19,20,21,22,23,24,25,26,27,28. 1,3-Dipolar cycloaddition of azomethine ylides with various dienophiles is the one of most powerful methods for the construction of nitrogen-containing five-membered heterocycles. In this respect, besides most common using imidazolium ylides, pyridinium ylide and isoquinolinium ylides, the 1,3-dipolar cycloaddition of thiazolium ylides or benzothiazolium ylides were also employed for preparing some pyrrolo[2,1-b]thiazole and its bezno- derivatives29,30,31,32,33,34,35,36. Recently, we found that the 1,3-dipolar cycloadidtion reaction of base mediated N-phenacylbenzothiazolium bromides with 3-methyleneoxindoles afforded spiro[benzo[d]pyrrolo[2,1-b]thiazole-3,3′-indolines] in good yields and with high diastereoselectivity37. Similarly, the base promoted three-component reaction of N-phenacylbenzothiazolium bromides, aromatic aldehydes and indane-1,3-dione resulted in functionalized spiro[benzo[d]pyrrolo[2,1-b]thiazole-3,2′-indenes]38. In order to further provide efficient synthetic methodology for the biologically important benzo[d]pyrrolo[2,1-b]thiazoles and in continuation of our project on developing new multicomponent reactions based on the heteroaromatic N-ylides39,40,41,42,43,44, herein we wish to report stepwise 1,3-dipolar cycloaddition reaction of N-phenacylbenzothiazolium bromides with various nitroalkenes for selective synthesis of functionalized benzo[d]pyrrolo[2,1-b]thiazoles and their tetrahydro- and dihydro- derivatives.
Results and Discussion
We began our investigation by carrying out the reaction of N-phenacylbenzothiazolium bromides with nitroalkenes according to our previously established base promoted procedure37,38. When a mixture of N-(4-methylphenacyl)benzothiazolium bromide with 1-nitro-2-(p-methoxyphenyl)ethene in ethanol with triethylamine as base was stirred at room temperature, the reaction can be finished in four hours to give the expected tetrahydrobenzo[d]pyrrolo[2,1-b]thiazole 1a in very high yield. However, the spectroscopic analysis indicated that the product containing two stereoisomers 1a/1a’ with a molecular ratio of 4:1 (Fig. 1, entry 1). Because there are four chiral carbon atoms in the newly-formed pyrrolidine ring, several diastereoisomers might be formed in the 1,3-dipolar cycloaddition reaction. Attempting to increase the diastereoselectivity was not successfully after testing different reaction conditions including solvent and base. The reaction in DCM, THF and CH3CN afforded isomeric mixture 1a/1a’ still with ratio of 4:1 in 32%, 53% and 68% yields. By using piperidine, DABCO and DBU as base, similar results were obtained. Although the 1,3-dipolar cycloaddition of cyclic N-ylides with nitroalkenes have been reported in several articles45,46,47,48,49,50,51, the formation of isomeric five-membered heterocyclic system have not been investigated in detail. Thus, we turned our attention to elucidate the relative configurations of the obtained two diastereoisomers. The similar reactions of various N-phenacylbenzothiazolium bromides and nitroalkenes also resulted in a mixture of two diastereoisomers. In some cases, only major isomers 1b-1d were successfully obtained, while the yields of minor isomers were too lower to separation (Fig. 1, entries 2–4). Both major isomers 1e-1f and minor isomers 1e’-1f’ were successfully separated out by column chromatography (Fig. 1, entries 5–6). Additionally, a mixture of major isomer 1g-1h and 1g’-1h’ were obtained and their ratios were calculated from the integration of 1H NMR spectra (Fig. 1, entries 7–9). The structures of all obtained products were fully characterized by IR, HRMS, 1H and 13C NMR spectroscopy. More importantly, the single crystal structures of major isomers 1a, 1b (Fig. 2), 1c, 1d, 1f and minor isomer of 1e’ (Fig. 3) were successfully determined by X-ray diffraction method. From Fig. 2, it can be seen that the phenyl group and p-methylbenzoyl group exist on the same side of the newly-formed pyrrolidine ring. The nitro group and phenylsulfanyl group exist on the other side of the newly-formed pyrrolidine ring. Thus, the major isomer has cis/trans/trans-configuration. On the other hand, the four substituted groups exist in all-trans-configuration in the minor isomer of 1e’ (Fig. 3). Thus, the relative configurations for the major and minor isomers of the polysubstituted tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles were ambiguously established by the determination of single crystal structures.
When the above cycloaddition reaction of N-phenacylbenzothiazolium bromides and nitroalkenes were carried out in refluxing ethanol in the presence of triethylamine for about six hours. Besides formation of above mentioned tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles, some partially dehydrogenated dihydrobenzo[d]pyrrolo[2,1-b]thiazoles containing isomers 2a-2b and isomers 2a’-2e’ were successfully separated out in lower yields from the reaction mixture (Fig. 4). It is interesting to find that partial dehydrogenation only occurred at 3,4-positions of the pyrrolidine ring, while the two hydrogen atoms at 1,2-position of pyrrolidine ring cannot be eliminated by prolonging refluxing time. The isomers 2a-2b and isomers 2a’-2e’ could be clearly assigned by comparing of their 1H NMR spectra. As for an example, 1H NMR spectrum of isomer 2b displays two doublets at 6.54, and 5.50 ppm with J = 10.7 Hz for the two neighboring protons in the newly-formed dihydropyrrole ring. The two protons in isomer 2b’ showed two slightly broad singlets at 6.79 and 4.70 ppm. The single crystal structures of the isomer 2a (Fig. 5) and isomer 2a’ (Fig. 6), 2b’ were determined by X-ray diffraction method. The single crystal structures clearly showed that the major isomer has cis-configuration and minor isomer has trans-configuration. It should be pointed out that the major isomer 2 were clearly coming from the dehydrogenation of the major isomer 1. The minor isomer 2’ also has same relative configuration to that of minor isomer 1’.
The above results clearly indicated that the reaction of N-phenacylbenzothiazolium bromides with nitroalkenes resulted in a mixture of isomeric tetrahydro- and dihydrobenzo[d]pyrrolo[2,1-b]thiazoles with various molecular ratios, which caused great difficulty for us to isolation and characterization of the obtained isomers. In order to avoid the influence of the complicate diastereoisomers, the aromatization process for above products was studied. Thus, after finishing the cycloaddition reaction, the oxidizing reagent DDQ was introduced in the reaction and the reaction mixture was refluxed for twelve hours. After workup, the expected aromatized benzo[d]pyrrolo[2,1-b]thiazoles 3a-3u were successfully obtained in satisfactory yields (Fig. 7). Because there is only one possible isomer for the products 3a-3u, the characterization for them was much easily finished. Various N-phenacylbenzothiazolium bromides and nitroalkenes with different substituents reacted smoothly to give the desired products. The substituents on the both substrates showed marginal effect on the yields of the products. Additionally, N-ethoxycarbonylmethyllbenzothiazolium salts was also employed in the reaction to give the substituted benzo[d]pyrrolo[2,1-b]thiazolecarboxylates (3v-3w) in good yields. The structures of the obtained products were fully established on the spectroscopic methods. Five single crystal structures of the compounds 3d (Fig. 8), 3e, 3j, 3p, and 3w were also determined by X-ray diffraction method.
In order to develop the synthetic value of the reaction, 1-methyl-1-nitroalkenes derived from the condensation reaction of aromatic aldehydes and nitroethane were also employed in the reaction. In the presence of triethylamine, a mixture of N-phenacylbenzothiazolium bromide and 1-methyl-1-nitroalkene was refluxed for about six hours, the methyl-substituted benzo[d]pyrrolo[2,1-b]thiazoles 4a-4f were successfully prepared in high yields (Fig. 9). The spectroscopic analysis indicated the nitro group was splitted off in the aromatization process, which is different to that of the above prepared compounds 3a-3w, in which the nitro group is retained in the final product. The structures of the benzo[d]pyrrolo[2,1-b]thiazoles 4a-4f were unambiguously determined by the single crystal structures of the compounds 4d (Fig. 10) and 4e.
For explaining the formation mechanism of the obtained various benzo[d]pyrrolo[2,1-b]thiazole derivatives, a plausible reaction mechanism is proposed on the basis of the present results and the related reactions (Fig. 11). At first, N-phenacylbenzothiazolium bromide was deprotonated by triethylamine to give a benzothiazolium ylide (A), which has a resonance form (A’). Secondly, the nucleophilic addition of the ylide (A) to nitroalkene gave a intermediate (B). Then, the intramolecular cyclization of intermediate (B) resulted in two isomeric tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles 1 and 1’. Because this process gave less thermodynamic stable cis/trans/trans-isomer as major isomer and more stable all-trans-isomer as minor isomer, it is a dynamic control reaction. The partial dehydrogenation of two isomeric products 1 and 1’ by oxidation of air produces corresponding dihydrobenzo[d]pyrrolo[2,1-b]thiazoles 2 and 2’, respectively. Finally, oxidation with DDQ resulted in the benzo[d]pyrrolo[2,1-b]thiazoles 3. The cycloaddition reaction with 1-methyl-1-alkene preceded with a similar path, the initially formed intermediate (C) was much easily oxidized in air to give the 3-methylbenzo[d]pyrrolo[2,1-b]thiazole 4 by eliminating nitro group.
Conclusion
In summary, we have systemically investigated stepwise1,3-dipolar cycloaddition reaction of N-phenacylbenzothiazolium bromides with nitroalkenes and successfully provided a convenient protocol for selective syntheses of functionalized benzo[d]pyrrolo[2,1-b]thiazole and its tetrahydro-, dihydro- derivatives. The relative configuration of tetrahydro-, and dihydro benzo[d]pyrrolo[2,1-b]thiazoles were clearly elucidated on the basis of NMR spectra and single crystal structures. The advantages of the reaction included using readily avaiable starting material, milder reaction condition, good yields and a widely variety of substrates. This reaction might be found potentail applications for the synthesis of the N,S-containing heterocycles in synthetic and medicinal chemistry.
Methods
Materials
All reactions were performed in atmosphere unless noted. All reagents were commercially available and use as supplied without further purification. NMR spectra were collected on either an Agilent DD2400 MHz spectrometer or a Bruker AV-600 MHz spectrometer with internal standard tetramethylsilane (TMS) and signals as internal references, and the chemical shifts (δ) were expressed in ppm. High-resolution Mass (ESI) spectra were obtained with Bruker Micro-TOF spectrometer. The Fourier transform infrared (FTIR) samples were prepared as thin films on KBr plates, and spectra were recorded on a Bruker Tensor 27 spectrometer and are reported in terms of frequency of absorption (cm−1). X-ray data were collected on a Bruker Smart APEX-2 CCD diffractometer.
General procedure for the synthesis of tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles 1a-1f
To a 50 mL round flask was added N-phenacylbenzothiazolium bromide (1.0 mmol), nitroalkene (1.0 mmol) and triethylamine (1.2 mmol) in ethanol (10.0 mL). The solution was stirred at room temperature for four hours. The solvent was removed by rotatory evaporation at reduced pressure. The residue was subjected to column with a mixture of light petroleum and ethyl acetate as eluent to give the pure products for analysis.
General procedure for the synthesis of dihydrobenzo[d]pyrrolo[2,1-b]thiazoles 2a-2b
To a 50 mL round flask was added N-phenacylbenzothiazolium bromide (1.0 mmol), nitroalkene (1.0 mmol) and triethylamine (1.2 mmol) in ethanol (10.0 mL). The solution was heated to refluxing for six hours. The solvent was removed by rotatory evaporation at reduced pressure. The residue was subjected to column with a mixture of light petroleum and ethyl acetate (V/V = 3:1) as eluent to give the pure products for analysis.
General procedure for the synthesis of benzo[d]pyrrolo[2,1-b]thiazoles 3a-3w
To a 50 mL round flask was added N-phenacylbenzothiazolium bromide (1.0 mmol), nitroalkene (1.0 mmol) and triethylamine (1.2 mmol) in ethanol (10.0 mL). The solution was heated to refluxing for six hours. Then, DDQ (1.2 mmol) was added and the mixture was refluxed for twelve hours. The solvent was removed by rotatory evaporation at reduced pressure. The residue was subjected to column with a mixture of light petroleum and ethyl acetate (V/V = 3:1) as eluent to give the pure products for analysis.
General procedure for the synthesis of hydrobenzo[d]pyrrolo[2,1-b]thiazoles 4a-4f
To a 50 mL round flask was added N-phenacylbenzothiazolium bromide (1.0 mmol), 1-methy-1-nitroalkenes (1.0 mmol) and triethylamine (1.2 mmol) in ethanol (10.0 mL). The solution was heated to refluxing for six hours. The solvent was removed by rotatory evaporation at reduced pressure. The residue was subjected to column with a mixture of light petroleum and ethyl acetate (V/V = 3:1) as eluent to give the pure products for analysis.
Additional Information
Accession Codes: Crystallographic data 1a (CCDC 1507670); 1b (CCDC 1507671); 1c (CCDC 1507672); 1d (CCDC1507673); 1e′ (CCDC 1507674); 1f (CCDC 1507675); 2a (CCDC 1507676); 2a′ (CCDC 1507677); 2b′ (CCDC 1507678); 3d (CCDC 1507679); 3e (CCDC 1507680); 3j (CCDC 1507681); 3p (CCDC 1507682); 3w (CCDC 1507683), 4d (CCDC 1507684) and 4e (CCDC 1507685) have been deposited at the Cambridge Crystallographic Database Centre and is available on request (http://www.ccdc.cam.ac.uk).
How to cite this article: Jin, G. et al. Stepwise cycloaddition reaction of N-phenacylbenzothiazolium bromides and nitroalkenes for tetrahydro-, dihydro- and benzo[d]pyrrolo[2,1-b]thiazoles. Sci. Rep. 7, 46470; doi: 10.1038/srep46470 (2017).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
Wang, D. C. et al. Enantioselective Dearomative [3 + 2] Cycloaddition Reactions of Benzothiazoles. Angew. Chem. In. Ed. 55, 14111–14115 (2016).
Garcia, R. et al. Pyrrolo[2,1-b]thiazole Derivatives by Asymmetric 1,3-Dipolar Reactions of Thiazolium Azomethine Ylides to Activated Vinyl Sulfoxides. J. Org. Chem. 73, 8484–8490 (2008).
Trapani, G. et al. Synthesis and anticonvulsant activity of some 1,2,3,3a-tetrahydropyrrolo[2,1-b]benzothiazol-1-ones and pyrrolo[2,1-b]thiazole analogs. Eur. J. Med. Chem. 29, 197–204 (1994).
Chaniyara, R. et al. Synthesis and antitumor evaluation of novel benzo[d]pyrrolo[2,1-b]thiazole derivatives. Eur. J. Med. Chem. 53, 28–40 (2012).
Shen, Y. M. et al. Synthesis and antiproliferative activity of multisubstituted N-fused heterocycles against the Hep-G2 cancer cell line. Monatsh. Chem. 142, 521–528 (2011).
Wu, Z. S. et al. Benzothiazoline based chemodosimeters for fluorogenic detection of hypochlorous acid. Bioorg. Med. Chem. Lett. 23, 4354–4357 (2013).
Caballero, E. et al. N-Substituted pyrrolinones from enamines and α-dicarbonyls. Tetrahedron 50, 7849–56 (1994).
Tverdokhlebov, A. V., Andrushko, A. P., Resnyanska, E. V. & Tolmachev, A. A. Pyrrolo[2,1-b]thiazol-3(2H)-ones as precursors of N-alkyl-2-(1H-pyrrol-2-ylthio)acetamides and N-alkyl-2-(1H-pyrrol-2-ylthio)propanamides. Synthesis 2317–2322 (2004).
Tverdokhlebov, A. V., Andrushko, A. P. & Tolmachev, A. A. Synthesis of sulfones in the pyrrolo[2,1-b]thiazole series. Synthesis 1433–1436 (2006).
Song, Y. S. & Lee, K. J. A new route to 6-substituted pyrrolo[2,1-b]thiazoles from Morita-Baylis-Hillman adducts of thiazole-2-carboxaldehyde. Synthesis 3037–3043 (2007).
Verma, S., George, J., Singh, S., Pardasani, P. & Pardasani, R. [3 + 2] cycloaddition reactions of thioisatin with thiazolidine-2-carboxylic acid: a versatile route to new heterocyclic scaffolds. Org. Med. Chem. Lett. 1, 6–15 (2011).
Boyd, S. et al. Synthesis of novel, functionalised tricycles utilising the interrupted Pummerer reaction. Tetrahedron Lett. 57, 152–154 (2016).
Pawliczek, M., Garve, L. K. B. & Werz, D. B. Exploiting amphiphilicity: facile metal free access to thianthrenes and related sulphur heterocycles. Chem. Commun. 51, 9165–9168 (2015).
Yavari, I., Piltan, M. & Moradi, L. Synthesis of pyrrolo[2,1-a]isoquinolines from activated acetylenes, benzoylnitromethanes, and isoquinoline. Tetrahedron 65, 2067–2071 (2009).
Cadogan, J. I. G. et al. Reactions of 2-(pyrrol-1-yl)benzyl radicals and related species under flash vacuum pyrolysis conditions. Org. Biomol. Chem. 7, 5173–5183 (2009).
Zhao, P., Yin, H., Gao, H. X. & Xi, C. J. Cu-Catalyzed Synthesis of Diaryl Thioethers and S-Cycles by Reaction of Aryl Iodides with Carbon Disulfide in the Presence of DBU. J. Org. Chem. 78, 5001–5006 (2013).
Sviripa, V. N., Brovarets, V. S. & Drach, B. S. A convenient route to functionalized derivatives of pyrrolo[2,1-b][1,3]benzothiazole. Russ. J. Gen. Chem. 76, 333–334 (2006).
Bedjeguelal, K., Bienayme, H. & Poigny, S., Schmitt, Ph. & Tam, E. Expeditious access to diversely substituted indolizines using a new multi-component condensation. QSAR & Comb. Sci. 25, 504–508 (2006).
Chen, L. C., Wang, H. M. & Kang, I. J. An interrupted Pummerer reaction induced by hypervalent iodine(III) reagent: a new synthesis of pyrrolo[2,1-b]benzothiazole. Heterocycles 51, 1437–1441 (1999).
Troll, T., Beckel, H. & Lentner-Boehm, C. Electrochemical synthesis of substituted indolizines; UV and fluorescence spectra. Tetrahedron 53, 81–90 (1997).
Kojima, H., Yamamoto, K., Kinoshita, Y. & Inoue, H. Synthesis of indolizines and pyrrolo[2,1-b]azoles from 2-pyridylmagnesium bromide and 2-lithiated azoles using tris(alkylthio)cyclopropenyl cations as a three-carbon building block. J. Heterocyclic Chem. 29, 1473–1476 (1992).
Lan, R. X., Jin, S. & Li, Z. M. New heterocyclic system synthesis. II. Reaction of 2,3-dihydro-1,5-benzothiazepines with dichlorocarbene. Chin. Chem. Lett. 3, 9–10 (1992).
Bates, D. K., Winters, R. T. & Picard, J. A. Intramolecular capture of Pummerer rearrangement intermediates. 3. Interrupted Pummerer rearrangement: capture of tricoordinate sulfur species generated under Pummerer rearrangement conditions. J. Org. Chem. 57, 3094–3097 (1992).
Bates, D. K., Sell, B. A. & Picard, J. A. Intramolecular capture of Pummerer rearrangement intermediates. Part 3. An interrupted Pummerer reaction induced by Vilsmeier reagent (phosphorous oxychloride-dimethylformamide). Tetrahedron Lett. 28, 3535–3538 (1987).
Lindley, J. M., Meth-Cohn, O. & Suschitzky, H. Competitive cyclization of singlet and triplet nitrenes. Part 6. The cyclization of 2-azidophenyl thienyl sulfides. J. Chem. Soc., Perkin Trans. 1: Org. Bio-Org. Chem. 10, 1198–1204 (1978).
Potts, K. T. & Choudhury, D. R. Mesoionic compounds. 43. Ring annulation utilizing the isomeric anhydro-2- and 3-hydroxythiazolo[2,3-b]benzothiazolium hydroxide mesoionic systems. J. Org. Chem. 43, 2697–2700 (1978).
Khattab, S. N., Hassan, S. Y., El-Faham, A., El Massry, A. M. & Amer, A. Reaction of phthalaldehydic acid with different substituted aniline as well as hydrazine derivatives. J. Heterocyclic Chem. 44, 617–626 (2007).
Cayley, A. N. et al. Preparation of novel polycyclic heterocycles using a tin(II) chloride dihydrate-mediated deacetalization-bicyclization sequence. Synthesis 23, 3846–3856 (2008).
Tsuge, O., Shimoharada, H. & Noguchi, M. Cycloaddition of benzothiazolium N-phenacylide with olefinic dipolarophiles. Heterocycles 15, 807–814 (1981).
Tsuge, O., Kanemasa, S. & Takenaka, S. Stereochemical study on 1,3-dipolar cycloaddition reactions of heteroaromatic N-ylides with unsymmetrically substituted olefinic dipolarophiles. Bull. Chem. Soc. Japan 58, 3320–3336 (1985).
Galera, C., Vaquero, J. J., Garcia, N. J. L. & Alvarez-Builla, J. 2-Methylthiazolium salts as 1,4-dinucleophiles. Thiazolo[3,2-a]pyridinium salts from Westphal condensation. J. Heterocyclic Chem. 23, 1889–92 (1986).
Iwamura, T., Kobayashi, M., Ichikawa, T., Shimizu, H. & Kataoka, T. Reinvestigation of reactions of thiazolium and benzothiazolium N-phenacylides with electron-deficient acetylenes. J. Chem. Soc., Perkin Trans. 1: Organic and Bio-Org. Chem. 629–35 (1996).
Kandeel, M. M. Synthetic studies on some new diaryl sulphides and diaryl sulphones with fused heterocyclic rings. Bull. Polish Academy of Sciences, Chem. 50, 309–322 (2002).
Schmidpeter, A. & Karaghiosoff, K. Product class 6: azaphospholes and azarsoles. Sci. Synth. 12, 679–703 (2002).
Berry, C. R., Zificsak, C. A., Gibbs, A. C. & Hlasta, D. J. Cycloaddition Reactions of Thiazolium Azomethine Ylides: Application to Pyrrolo[2,1-b]thiazoles. Org. Lett. 9, 4099–4102 (2007).
Nassiri, M., Milani, F. J. & Hassankhani, A. Synthesis of Spiro Pyrrolobenzothiazole Derivatives via a Three-Component Reaction. J. Heterocyclic Chem. 52, 1162–1166 (2015).
Shen, G. L., Sun, J. & Yan, C. G. Convenient Synthesis of Spiro[benzo[d]pyrrolo[2,1-b]thiazole-3,2-indenes] Derivatives via Three-Component Reaction. Chin. J. Chem. 34, 412–418 (2016).
Shen, G. L., Sun, J. & Yan, C. G. Diastereoselective synthesis of spiro[benzo[d]pyrrolo-[2,1-b]thiazole-3,3′-indolines] via cycloaddition reaction of N-phenacylbenzothiazolium bromides and 3-methyleneoxindoles. Org. Biomol. Chem. 13, 10929–10938 (2015).
Yan, C. G. et al. One-step synthesis of polysubstituted benzene derivatives by multi-component cyclization of α-bromoacetate, malononitrile and aromatic aldehydes. Chem. Commun. 1440–1442 (2008).
Yan, C. G., Wang, Q. F., Song, X. K. & Sun, J. One-Step Synthesis of Pyrido[1,2-a]benzimidazole Derivatives by a Novel Multicomponent Reaction of Chloroacetonitrile, Malononitrile, Aromatic Aldehyde, and Pyridine. J. Org. Chem. 74, 710–718 (2009).
Hou, H., Zhang, Y. & Yan, C. G. One-pot synthesis of 4-substituted isoquinolinium zwitterionic salts by metal-free C-H bond activation. Chem. Commun. 48, 4492–4494 (2012).
Hui, L., Li, H. Y. & Yan, C. G. Molecular diversity of three-component reactions of N-benzylbenzimidazolium salts, isatin, and malononitrile or ethyl cyanoacetate. Eur. J. Org. Chem. 3157–3164 (2012).
Shen, G. L., Sun, J. & Yan, C. G. Construction of dispirocyclohexyl-3,3′-bisoxindole and dispirocyclopentyl-3,3′-bisoxindole via domino cycloaddition reactions of N-benzylbenzimidazolium salts with 2-(2-oxoindolin-3-ylidene)acetates. RSC Advances. 5, 4475–4483 (2015).
Shen, G. L., Huang, Y., Sun, J. & Yan, C. G. Formation of diverse polycyclic spirooxindoles via three-component reaction of isoquinolinium salts, isatins and malononitrile. Sci. Rep. 7, 41024 (2017).
Tsuge, O., Kanemasa, S. & Takenaka, S. Stereochemical study on 1,3-dipolar cycloaddition reactions of heteroaromatic N-ylides with symmetrically substituted cis and trans olefins. Bull. Chem. Soc. Japan 58, 3137–3157 (1985).
Nosachev, S. B., Del’netskaya, K. A. Solov’ev, N. A. & Tyrkov, A. G. Substituted 1-nitro-2-phenylethenes in reaction with N-phenacyl- and N-acetonylisoquinolinium bromides. Russ. J. Org. Chem. 46, 1427–1429 (2010).
Chen, K. P., Chen, Y. J. & Chuang, C. P. Ethyl α-Nitrocinnamates in the Synthesis of Highly Functionalized Isoxazoles, Eur. J. Org. Chem. 27, 5292–5300 (2010).
Kucukdisli, M. & Opatz, T. A modular synthesis of polysubstituted indolizines. Eur. J. Org. Chem. 4555–4564 (2012).
Liu, Z. M., Fang, J. & Yan, C. G. Diastereoselective synthesis of 1,10-dihydropyrrolo[1,2-a][1,10]phenanthroline derivatives via 1,3-dipolar cycloaddition reaction. Chem. Res. Chin. Univ. 29, 1089–1093 (2013).
Fang, J. & Yan, C. G. Synthesis of 6a,6b,13,13a-tetrahydro-6H-5-oxa-12a-azadibenzo[a,g]fluorene derivatives via cycloaddition reactions of isoquinolinium salts with 3-nitrochromenes. Mole. Divers. 18, 91–99 (2014).
Shi, F., Zhang, Y., Lu, Z. L., Zhu, X. L., Kan, W. Q., Wang, X. & Hu, H. Y. Investigation of the reactions of quinolinium ylide with nitrostyrenes. Synthesis 48, 413–420 (2016).
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (Grant No. 21272200) and the Priority Academic Program Development of Jiangsu Higher Education Institutions. We thank Analysis and Test Center of Yangzhou University providing all analytical instruments.
Author information
Authors and Affiliations
Contributions
C.-G.Y. led this research. G.J. and R.-Y.Y. performed all the synthetic work and conducted NMR, IR, HRMS. J.S. solved the single crystal X-ray structures and checked all data. C.-G.Y. wrote the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Jin, G., Sun, J., Yang, RY. et al. Stepwise cycloaddition reaction of N-phenacylbenzothiazolium bromides and nitroalkenes for tetrahydro-, dihydro- and benzo[d]pyrrolo[2,1-b]thiazoles. Sci Rep 7, 46470 (2017). https://doi.org/10.1038/srep46470
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep46470
- Springer Nature Limited
This article is cited by
-
An efficient diastereoselective synthesis of novel fused 5H-furo[2,3-d]thiazolo[3,2-a]pyrimidin-5-ones via one-pot three-component reaction
Molecular Diversity (2022)
-
A density functional theory study on the [3 + 2] cycloaddition of N-(p-methylphenacyl)benzothiazolium ylide and 1-nitro-2-(p-methoxyphenyl) ethene: the formation of two diastereomeric adducts via two different mechanisms
Theoretical Chemistry Accounts (2019)
-
One-pot three-component synthesis and oxidation of functionalized tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles
Molecular Diversity (2018)
-
Regioselectivity and diastereoselectivity of three-component reaction of α-amino acid, dialkyl acetylenedicarboxylates and 2-arylidene-1,3-indanediones
Scientific Reports (2017)