Abstract
Volcanic activity represents a hazard to population and infrastructure worldwide. The study of acoustic waves in the atmosphere by volcanic activity is growing in popularity as an effective tool to monitor and understand the mechanisms of eruptions. In 2019, we deployed two 6-element infrasound arrays at Mt. Etna, Italy, one of the most active volcanoes in the world. Our experiment captured a range of acoustic signals associated with diverse activity ranging from background degassing to energetic Strombolian explosions, lava flows, and atmospheric injection of volcanic ash. Here, we present a description of this valuable, publicly available, research dataset. We document the design and scope of the experiment, report on data availability, and present a brief summary of the activity observed at Mt. Etna during our deployment aiming to facilitate future use of these valuable data. This dataset is the first example of open data from a multiple infrasound array experiment at Mt. Etna and one of the few available globally.
Measurement(s) | acoustic waves • volcanic activity |
Technology Type(s) | infrasound |
Sample Characteristic - Environment | volcano |
Sample Characteristic - Location | Mount Etna |
Machine-accessible metadata file describing the reported data: https://doi.org/10.6084/m9.figshare.15144996
Similar content being viewed by others
Background & Summary
Volcanic activity is a prolific source of infrasound, i.e., acoustic atmospheric waves with frequencies below 20 Hz1,2,3. Continuous surface degassing, explosions and surface mass flows are common sources of infrasound at volcanoes. Infrasound-based methods are increasingly popular for real-time monitoring of volcanic unrest with applications at scales from local to global, that is source-receiver distances from few hundred meters to several thousand kilometres3,4,5,6,7. Infrasound sensors are often deployed – at the local scale – as distributed networks, within distances of up to several kilometres from one or multiple active vents. Alternatively, microphones can be installed as tight clusters of multiple sensors, or arrays, at distances of several tens of meters from one another8. Array deployments offer advantages over distributed networks owing to their performances in noise reduction and signal dis crimination. The wealth of infrasound data gathered at active volcanoes over the past two decades has allowed significant advances in our understanding of the processes that control the onset, temporal evolution, style and intensity of eruptions, and associated hazards1,2. Infrasound recorded at local distances from volcanic sources has been key to inform the development of methods to detect and track the evolution of eruptions in real-time, to compile and validate models that account for the influence of atmospheric conditions and topography on the propagation of the acoustic wavefield, and to unravel the links between acoustic sources and eruption intensity9,10,11,12,13. Despite a rapidly growing number of volcano infrasound studies, many questions remain open due to the comparatively scarce number of publicly available high-quality infrasound datasets8.
In the summer of 2019, we deployed two small-aperture infrasound arrays at Mt. Etna, Italy, within the framework of EUROVOLC (European Network of Observatories and Research Infrastructures for Volcanology), a project coordinated by the Icelandic Meteorological Office and funded under the Horizon 2020 program of the European Commission. One of the overarching goals of EUROVOLC is to improve integration within the volcanological community bringing together scientists from a wide range of disciplines, data and infrastructure. EUROVOLC provides competitive access to key infrastructure at a number of field locations across Europe. Within this framework we were granted access and logistics support for an infrasound experiment at Mt. Etna (VOSSIA, VOlcano monitoring with SeiSmic and Infrasound Arrays) through one of the EUROVOLC partner organizations, the Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Catania-Osservatorio Etneo (INGV-OE). The core objectives of VOSSIA were:
-
1)
test the potential of using multiple infrasound array to discriminate multiple active vents (e.g., ref. 8).
-
2)
develop a fast and efficient real-time workflow for the analysis of infrasound data, including estimates of uncertainties on acoustic source locations (e.g., ref. 8).
-
3)
investigate the potential integration of infrasound methods into volcano monitoring and early warning protocols at Mt. Etna.
The experiment recorded diverse infrasound linked to activity ranging from background degassing to eruption at one of the active craters at Mt. Etna. In this manuscript we introduce the dataset including details on the instruments and their deployment, and statistics on data recovery. We also provide a summary of the most notable activity observed at Mt. Etna during the recording period, showing examples of infrasound associated with such activity in order to facilitate future use of the dataset by other investigators.
Mt. Etna, Italy
Mt. Etna is located in Southern Italy (34.748° N, 14.999° E, summit elevation 3320 m) near the city of Catania, the second largest city on the island of Sicily (Fig. 1a,inset). Mt. Etna is a stratovolcano with predominately basaltic composition and activity ranging from lava effusion to Plinian eruptions14,15. Volcanic hazards at Mt. Etna are mainly linked to its location within 100 km of three airports6, its proximity to densely populated areas, and the elevated number of tourists visiting the Mt. Etna National Park every year.
Eruptions at Mt. Etna – over the past two decades – have been typified by lava effusion anticipated or punctuated by Strombolian explosions and intense lava fountain activity from one of the summit craters (Fig. 1): the North East Crater (NEC), Bocca Nuova (BN), Voragine (VOR), South East Crater (SEC) and New South East Crater (NSEC). In recent times, explosive activity at Mt. Etna has intensified with 38 eruptive episodes between 2011 and 201316 and more sporadically with >30 episodes during 2014-present. Typical activity consists of sequences of Strombolian explosions transitioning to sustained lava fountaining – occasionally feeding large ash plumes – followed by the opening of one or more lateral vents at one the summit craters, and emplacement of lava flows. In the volcanological literature, these episodes of rapidly escalating and intensifying activity are referred to as paroxysms. Detailed information and catalogues of eruptive activity at Mt. Etna since 1995 can be found in refs. 6,16.
Since 2001, Mt. Etna has been monitored by INGV-OE with a multi-parameter instrument network, including continuous and real-time seismic, acoustic, deformation, gas, visual and thermal infrared measurements. As part of their routine monitoring protocols, INGV-OE produces real-time deformation, gas flux and seismic tremor amplitude time series, as well as catalogues of explosions and seismic tremor locations. Since 2001, INGV-OE has operated an eruption alert system based on empirical relations between the amplitude of seismic tremor and the occurrence of paroxysmal activity17. A second alert system, based on unsupervised neural network classification of seismic tremor, was later developed18 and is also currently used at INGV-OE. In addition to the INGV-OE network, the Laboratorio di Geofisica Sperimentale of the University of Firenze (LGS) also operates two four-element, real-time, infrasound arrays at Mt. Etna. The acoustic data collected forms the basis for an Early Warning System that has been in operation since 2015. Early Warning messages from this system are dispatched to the Italian Civil Protection headquarters and used to inform further action by the national and regional civil protection authorities6.
Past infrasound studies at Mt. Etna have been based on both data recorded by the 8-station INGV-OE infrasound network19, and occasional small-scale temporary experiments20. This body of research includes studies on: i) the characterization and location of acoustic sources19; ii) investigation of their source mechanisms20,21,22,23; iii) models of the relationships between acoustic signals and variable eruptive regimes20; iv) the links between the acoustic wavefield and eruption source parameters11,22.
Methods and Technical Validation
Two 6-element infrasound arrays were deployed at Mt. Etna between 2 July and 26 August, 2019 by a team of researchers from the University of Liverpool (UK) and the INGV-OE within the framework of the VOSSIA experiment. Figure 1 shows the two array sites (ENEA and ENCR, Fig. 1a), and the locations of all acoustic sensors deployed (Fig. 1b,c). The arrays were deployed in similar configurations, consisting of a central element surrounded by 5 sensors positioned approximately at the vertices of a pentagon, with an aperture of approximately 100 meters (Fig. 1b,c). The locations of the two arrays were chosen considering three main criteria: i) site accessibility and safety of personnel; ii) minimizing differences in elevation between sensors within each array; iii) optimizing the detection and discrimination of activity from all summit craters. Table 1 provides information on locations for the sensors at the ENEA and ENCR arrays.
All array elements at the ENEA site were equipped with Chaparral Physics M60 UHP microphones (http://chaparralphysics.com/model60.html, last accessed 19 March, 2021); the M60 UHP sensors have a sensitivity of 9 mV/Pa, flat frequency response (to within +/−3 dB) between 0.3 and 245 Hz, and full-scale pressure range of +/−1000 Pa. The microphones at the ENCR site were IST2018 with sensitivity of 20 mV/Pa, flat frequency response between 0.06 and 40 Hz, and a full-scale pressure range of +/−240 Pa. A comparison between the performances of these two types of sensors can be found in ref. 24. Data were sampled at 100 Hz using DIGOS DATACUBE3 digital data recorders (https://digos.eu/CUBE/DATA-CUBE-Datasheet-2017-02.pdf, last accessed 19 March, 2021) on their gain 1 setting (4,096 V peak-to-peak). DATACUBE recorders have an effective resolution of 22.4 bit (at 100 Hz), analog to digital conversion dynamic range of 125 dB (at 100 Hz), and a GPS timing accuracy of 1 ms. Voltage dividers (by a factor of 4.7) designed at the University of Liverpool were used in order to match the voltage output of the sensors to the input of the data recorders. All sensors were tested (24-hour ‘huddle’ test) before and after deployment. All stations were deployed in the same configuration; sensors, cables and data recorders were placed inside plastic boxes connected to 12V-75Ah batteries, which were buried at approximately 1–2 m from the recording equipment (Fig. 2). The boxes had a non-sealed cover to ensure effective coupling between of the microphone with the atmosphere. The GPS antenna was positioned outside the instrument box. Each box was then covered with rocks sourced on site to provide drainage of rainwater and shielding from wind noise. No additional noise reducing strategies were adopted.
Data Records
The complete dataset described in this manuscript, including continuous raw waveform data and station metadata, is available through the facilities of the Incorporated Research
Institutions for Seismology Data Management Center25. The data are archived under the temporary FDSN (International Federation of Digital Seismograph Networks) network code 5O (IRIS: MDA: 5O). Data availability statistics for the experiment are shown in Fig. 3. Data recovery was between 96.6% and 98.9% at all stations with the exception of the ENEA6 site (58.6%), which was affected by damage to the data recorder between 6 and 23 July, 2019. Other minor data gaps visible in Fig. 3 correspond to periods of equipment maintenance.
Activity at Mt. Etna in July-August, 2019
In this section we provide a brief overview of the diverse activity at Mt. Etna during the period of our experiment (2 Jul – 26 Aug, 2019). We offer a preliminary account of the main eruptive events and their timing in order to facilitate future use of the dataset by other investigators. A detailed report, or an in-depth analysis of the mechanisms of eruptive activity, is beyond the scope of this manuscript. The activity reported by INGV-OE, and observed in the field by the experiment team, ranged from passive background degassing from the summit craters to two episodes of paroxysmal activity at the NSEC on 18–19 July and 27–28 July, 2019. A large explosion from the NSEC generated an ash plume rising to > 3 km above the vent on 27 July, 2019. Paroxysms followed a pattern that is typical at Mt. Etna; they started with rapidly intensifying Strombolian explosions, eventually feeding sustained lava fountains, finally followed by the emplacement of lava flows. Activity at the NSEC remained elevated throughout the entire month of July. The NEC was mainly active during the first half of July; degassing levels were elevated, and two large ash-rich explosions were observed on 2 and 3 July, 2019. For the remaining of the experiment activity at the NEC remained low, characterized by low-level degassing, occasionally punctuated by small gas-and-ash explosions. BN was also mostly active during the first half of July when sequences of intra-crater gas explosions were observed. A summary of all observations during the deployment period is provided in Table 2.
Examples of infrasound signals in the dataset
The diverse infrasound recorded during July-August 2019 holds potential to contribute to improving our understanding of eruption mechanisms at Mt. Etna, and to validate models of the generation and propagation of acoustic wavefields in volcanic areas (e.g., ref. 11). In addition, these data could be further exploited to test the performance and limitations of infrasound array processing workflows, with the objective to inform and optimize future deployments of acoustic sensors for volcano monitoring. The dataset has already been used to demonstrate that two optimally positioned arrays allow continuous detection and discrimination of activity from all summit craters at Mt. Etna, including estimates of uncertainty in these measurements8.
Here, we show examples of waveforms recorded during July-August 2019 associated with confirmed sources and, briefly, discuss their characteristics. The activity observed during our field experiment included episodic ash emissions, degassing from all summit craters, and Strombolian explosions. Infrasound signals corresponding to these types of activity, and their spectrograms, are shown in Fig. 4. The waveforms recorded during minor emissions of ash (e.g., Fig. 4a seconds 75–85) – typically observed at the NEC – exhibit low amplitudes (on the order of few Pa), emergent character (i.e., lack of an impulsive onset) and consist of multiple pulses. Their energy is concentrated in the 0.5–5 Hz frequency band (Fig. 4a), not dissimilar from gas explosions shown in Fig. 4b. Only one major ash explosion was observed during the deployment on 27 July, 2019 at approximately 12:21 UTC. The waveforms for this event recorded by all microphones at the ENCR array are shown in Fig. 5. Amplitudes are notably higher for this explosion than for the episodic ash emissions observed from the NEC (Fig. 5a). The signal has an impulsive onset at ~12:20:40 UTC, followed by at least two additional pulses; a sustained ash plume, rising to > 3 km above the vent, was reported by INGV-OE (Table 2). Sequences of impulsive, rapidly occurring and gas-rich, explosions were typical throughout the deployment, originating either from a vent located deep within the BN crater (Fig. 4b) or the NEC. Their infrasound signature consists of sequences of approximately N-shaped, low-amplitude, pulses at rates of up to one every second, often merging into one another to form a tremor-like signal (Fig. 4b). Elevated Strombolian activity was observed at the NSEC during the second half of July, accompanied by a lava flow originating on the NE flank of the NSEC (Table 2). Figure 4c shows 3 min of infrasound, including multiple Strombolian explosions. The signals corresponding to individual explosions are impulsive, characterized by a well-defined main pulse at times followed by one or more smaller trailing compressions. The spectrogram for these events (Fig. 4c) shows energy in the band from about 0.6 to 10 Hz, for the larger events reaching up to 20 Hz. Two additional characteristics of these explosion signals are the overall waveform amplitude modulation effect over time, and a degree of waveform asymmetry with the main compression phase having larger amplitude than the following decompression (Fig. 4c). Mt. Etna, similarly to other open-vent volcanoes where explosive degassing takes place (e.g., Johnson et al., 2018), produces waveforms with long ringing codas, characterized by strongly peaked, monochromatic, spectra. Figure 6 shows an example of such monochromatic signals as recorded across the ENEA and ENCR arrays along with their frequency spectra, showing a dominant peak at about 0.6 Hz. Visual observations conducted by the field team during the experiment confirmed that these signals were generated by intra-crater gas explosions either within the NEC or BN. The location of the explosion is also confirmed by previous results in ref. 8 crossing the back-azimuth obtained from array processing of ENEA and ENCR data. The source mechanisms of monochromatic signals at Mt. Etna have recently been investigated, for example in refs. 21,22, suggesting that the occurrence of strongly peaked spectra is linked to acoustic resonance at the crater, and thus, controlled by vent and crater morphology. The dataset presented in this manuscript includes numerous examples of such waveforms, thus providing a unique record to allow further investigation of the resonance mechanisms associated with intra-crater explosive degassing at Mt. Etna, and other volcanoes.
Usage Notes
Data can be obtained in a number of standard seismological data file formats from IRIS DMC using one of their multiple data request tools (IRIS: Data at IRIS). Data can also be retrieved from the IRIS DMC data servers using open source software applications for processing of seismological time series such as the ObsPy package26.
Code availability
A Python notebook is provided in the supplementary material section of this manuscript, which demonstrates data retrieval from IRIS DMC. The notebook also demonstrates how to process data to obtain the results shown in Fig. 4. The user will require a working installation of the ObsPy package26 to execute the notebook27.
References
Johnson, J. B. & Ripepe, M. Volcano infrasound: A review. J. Volcanol. Geotherm. Res. 206, 61–69 (2011).
Fee, D. & Matoza, R. S. An overview of volcano infrasound: From hawaiian to plinian, local to global. J. Volcanol. Geotherm. Res. 249, 123–139 (2013).
De Angelis, S., Diaz-Moreno, A. & Zuccarello, L. Recent developments and applications of acoustic infrasound to monitor volcanic emissions. Remote Sens. 11, 1–18 (2019).
Cannata, A., Montalto, P., Privitera, E., Russo, G. & Gresta, S. Tracking eruptive phenomena by infrasound: May 13, 2008 eruption at Mt. Etna. Geophys. Res. Lett. 36, L05304 (2009).
Matoza, R. S. et al. Infrasonic observations of the June 2009 Sarychev Peak eruption, Kuril Islands: Implications for infrasonic monitoring of remote explosive volcanism. J. Volcanol. Geotherm. Res. 200, 35–48 (2011).
Ripepe, M. et al. Infrasonic Early Warning System for Explosive Eruptions. J. Geophys. Res. Solid Earth 123, 9570–9585 (2018).
Marchetti, E. et al. Infrasound Array Analysis of Debris Flow Activity and Implication for Early Warning. J. Geophys. Res. Earth Surf. 124, 567–587 (2019).
De Angelis, S. et al. Uncertainty in Detection of Volcanic Activity Using Infrasound Arrays: Examples From Mt. Etna, Italy. Front. Earth Sci. 8, 1–11 (2020).
Lacanna, G. & Ripepe, M. Influence of near-source volcano topography on the acoustic wavefield and implication for source modeling. J. Volcanol. Geotherm. Res. 250, 9–18 (2013).
Brogi, F., Ripepe, M. & Bonadonna, C. Lattice Boltzmann modeling to explain volcano acoustic source. Sci. Rep. 8, 1–8 (2018).
Diaz‐Moreno, A. et al. Volume Flow Rate Estimation for Small Explosions at Mt. Etna, Italy, From Acoustic Waveform Inversion. Geophys. Res. Lett. 46, 11071–11079 (2019).
Iezzi, A. M., Fee, D., Kim, K., Jolly, A. D. & Matoza, R. S. Three‐Dimensional Acoustic Multipole Waveform Inversion at Yasur Volcano, Vanuatu. J. Geophys. Res. Solid Earth 124, 8679–8703 (2019).
Fee, D., Yokoo, A. & Johnson, J. B. Introduction to an open community infrasound dataset from the actively erupting Sakurajima Volcano, Japan. Seismol. Res. Lett. 85, 1151–1162 (2014).
Coltelli, M., Del Carlo, P. & Vezzoli, L. Stratigraphic constraints for explosive activity in the past 100 ka at Etna Volcano, Italy. Int. J. Earth Sci. 89, 665–677 (2000).
Houghton, B. F. et al. The influence of conduit processes on changes in style of basaltic Plinian eruptions: Tarawera 1886 and Etna 122 BC. J. Volcanol. Geotherm. Res. 137, 1–14 (2004).
Bonaccorso, A. & Calvari, S. Major effusive eruptions and recent lava fountains: Balance between expected and erupted magma volumes at Etna volcano. Geophys. Res. Lett. 40(23), 6069–6073 (2013).
Alparone, S. et al. Alert system to mitigate tephra fallout hazards at Mt. Etna Volcano, Italy. Nat Hazards 43, 333–350 (2007).
Langer, H., Falsaperla, S., Messina, A., Spampinato, S. & Behncke, B. Detecting imminent eruptive activity at Mt Etna, Italy, in 2007–2008 through pattern classification of volcanic tremor data. J. Volcanol. Geotherm. Res. 200, 1–17 (2011).
Cannata, A. et al. Monitoring Seismo-volcanic and Infrasonic Signals at Volcanoes: Mt. Etna Case Study. Pure Appl. Geophys. 170, 1751–1771 (2013).
Marchetti, E., Ripepe, M., Ulivieri, G., Caffo, S. & Privitera, E. Infrasonic evidences for branched conduit dynamics at {Mt}. {Etna} volcano, {Italy}. Geophys. Res. Lett. 36, L19308 (2009).
Cannavo’, F., Sciotto, M., Cannata, A. & Di Grazia, G. An Integrated Geophysical Approach to Track Magma Intrusion: The 2018 Christmas Eve Eruption at Mount Etna. Geophys. Res. Lett. 46, 8009–8017 (2019).
Watson, L. M., Johnson, J. B., Sciotto, M. & Cannata, A. Changes in Crater Geometry Revealed by Inversion of Harmonic Infrasound Observations: 24 December 2018 Eruption of Mount Etna, Italy. Geophys. Res. Lett. 47 (2020).
Sciotto, M., Cannata, A., Gresta, S., Privitera, E. & Spina, L. Seismic and infrasound signals at {Mt}. {Etna}: {Modeling} the {North}-{East} crater conduit and its relation with the 2008–2009 eruption feeding system. J. Volcanol. Geotherm. Res. 254, 53–68 (2013).
Grangeon, J. & Lesage, P. A robust, low-cost and well-calibrated infrasound sensor for volcano monitoring. J. Volcanol. Geotherm. Res. 387, 106668 (2019).
Zuccarello, L. & De Angelis, S. Seismo-Acoustic Array Experiment at Mt. Etna - 2019 International Federation of Digital Seismograph Networks https://doi.org/10.7914/SN/5O_2019 (2019).
Beyreuther, M. et al. ObsPy: A Python Toolbox for Seismology. Seismol. Res. Lett. 81, 530–533 (2010).
Uieda, L. et al. PyGMT: A Python interface for the Generic Mapping Tools (Version v0.3.1). Zenodo https://doi.org/10.5281/zenodo.4592991 (2021).
Acknowledgements
The authors wish to thank research and technical staff of the INGV-OE, in particular Daniele Pellegrino, Mario Pulvirenti, Graziano Larocca, Mario Paratore, Ornella Cocina and Alfio Messina. S. De Angelis, L. Zuccarello and S. Rapisarda acknowledge support from the EUROVOLC (European Network of Observatories and Research Infrastructures for Volcanology) project, an initiative coordinated by the Icelandic Meteorological Office and funded under the Horizon 2020 program (H2020-EU.1.4.1.2. – Integrating and opening existing national and regional research infrastructures of European interest) of the European Commission (Horizon 2020 Project ID: 731070). S. De Angelis acknowledges support from Natural Environment Research Council (UK) standard grant NE/P00105X/1. L. Zuccarello acknowledges support from European Union’s Horizon 2020 Research and Innovation Programme Under the Marie Sklodowska-Curie Grant Agreement no 798480. Figures in this manuscript were produced using the open-source software packages PyGMT and ObsPy26.
Author information
Authors and Affiliations
Contributions
S.D.A. and L.Z. wrote the initial VOSSIA proposal and designed the experiment, contributed to assembling the dataset, and wrote the manuscript with the help of the co-authors. S.R. tested the equipment, organized fieldwork, and participated in the original design of the experiment. V.M. participated in the fieldwork, contributed to assembling the final dataset and tested its quality and retrieval. All authors contributed to the design of the figures and tables in this manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
The Creative Commons Public Domain Dedication waiver http://creativecommons.org/publicdomain/zero/1.0/ applies to the metadata files associated with this article.
About this article
Cite this article
De Angelis, S., Zuccarello, L., Rapisarda, S. et al. Introduction to a community dataset from an infrasound array experiment at Mt. Etna, Italy. Sci Data 8, 247 (2021). https://doi.org/10.1038/s41597-021-01030-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41597-021-01030-6
- Springer Nature Limited