Abstract
Ice nucleation is a crucial process in nature and industries; however, the role of the free surface of water in this process remains unclear. To address this, we investigate the microscopic freezing process using brute-force molecular dynamics simulations. We discover that the free surface assists ice nucleation through an unexpected mechanism. The surface-induced negative pressure enhances the formation of local structures with a ring topology characteristic of Ice 0-like symmetry, promoting ice nucleation despite the symmetry differing from ordinary ice crystals. Unlike substrate-induced nucleation via water-solid interactions that occurs directly on the surface, this negative-pressure-induced mechanism promotes ice nucleation slightly inward the surface. Our findings provide a molecular-level understanding of the mechanism and pathway behind free-surface-induced ice formation, resolving the longstanding debate. The implications of our discoveries are of substantial importance in areas such as cloud formation, food technology, and other fields where ice nucleation plays a pivotal role.
Similar content being viewed by others
Introduction
Water freezing phenomenon is ubiquitous in nature1,2,3,4, science5 and technology6, such as atmospheric clouds5, biological cells7, meteors8 and even air-conditioner applications. For instance, the radiative properties of clouds are determined by the formation of ice particles9. In the real world, most water exists in forms with interfaces, especially the free surface, such as water droplets in clouds and on all kinds of objects in daily life. Therefore, understanding the role of the free surface in ice nucleation and the microscopic ice nucleation mechanism at the molecular level is crucial from both fundamental and application perspectives. However, it is still challenging to directly detect the ice nucleation events at their inception since the necessary temporal and spatial resolution still needs to be improved in experiments. Tabazadeh et al.10,11 proposed surface-induced crystallisation based on classical nucleation theory. Nucleation events near the free water surface are favoured thermodynamically than in bulk if σsv − σlv > σls, with σsv, σlv, and σls, the solid-liquid, solid-vapour, and liquid-vapour interface tensions, respectively. Due to the challenges of measuring the interface tension, it is difficult to confirm whether the criterion works for water. Furthermore, in later years, more efforts on surface freezing provide results consistent and inconsistent with this theory12,13, resulting in controversy until now. More seriously, whether we can use the macroscopic equilibrium properties to predict the nonequilibrium microscopic process, such as crystal nucleation, is unclear.
For addressing the problems of surface freezing in water, molecular dynamics (MD) simulations are powerful alternatives that make it possible to access microscopic information with a molecular-level resolution. However, the computational studies have also been inconclusive due to their dependence on the force fields, system sizes, and even ice molecule identification14,15. For instance, it was reported that for a free-standing water film with a six-site force field on the nanoscale, ice crystals likely nucleate near the surface16,17,18 due to the lack of electrostatic neutrality. However, this result has not been reproduced in larger systems and is now speculated due to the finite-system-size effects15,19, although this needs to be confirmed. For all-atom models incorporating charges, such as TIP4P and TIP4P/ice20,21, exploring the statistical aspects of ice nucleation through brute-force simulations is currently a formidable task. This is primarily due to the difficulty in acquiring trajectories that are both long enough and numerous enough to provide meaningful insights.
Concerning these difficulties, the coarse-grained monoatomic water model, mW water22, significantly improves the computational efficiency due to the absence of long-range Coulomb electrostatic interactions. Besides, the mW water model can also achieve remarkable success in reproducing the features of water’s energetics, thermodynamics, and structures22,23. For example, the mW model well captures the water’s locally favoured tetrahedral arrangements and the relevant ice forms at ambient pressure24, such as hexagonal Ice, cubic Ice, and Ice 0. Haji-Akbari et al.14,15,19 and Li et al.25 estimated the ice nucleation rates in free-standing films and nanodroplets of the mW water with a forward-flux sampling method. Both groups found that despite the system satisfying the criterion, σsv − σlv > σls, surface freezing is unfavoured in the mW water, which is against Tanazadeh’s theory10,11. Recently, Hayton et al.26 also reached the same conclusion using a seeding technique. Specifically, they found that nucleation remains bulk-like in films thicker than ~ 3. 5 nm, but the nucleation rate starts to decrease below a thickness of ~ 3.5 nm at 220 K.
Controversially, the conclusion drawn from the investigation of the realistic water model, TIP4P/ice27, using forward-flux sampling19, starkly contradicts the conclusions for the mW water model described above. This study reported a remarkable seven orders of magnitude enhancement in ice nucleation for 4-nm films compared to the bulk. However, perplexingly, their observations indicated that freezing initiates away from the air-water interface, introducing a counterintuitive aspect to the results. On this issue, Hayton et al.26 claimed that the apparent discrepancy between the mW and TIP4P/ice water models can be resolved through consistent treatment of truncated interactions between homogeneous and inhomogeneous systems when using a model with a long-range potential, such as TIP4P/ice.
Consequently, the current understanding remains far from conclusive. In this context, we highlight a potential challenge in applying seeding techniques and enhanced sampling algorithms to study crystal nucleation phenomena in a heterogeneous system.
Estimating the crystal nucleation rate through seeding techniques in a heterogeneous system can be tricky, as it is influenced by the selection of the seed’s position and shape. On the other hand, techniques such as forward flux sampling and biased Monte Carlo heavily rely on the careful selection of a relevant order parameter to accurately describe the process of crystallisation.
In previous studies mentioned above, the local 6th-order bond orientational order parameter q6 was employed for estimating the ice nucleation rate. However, a recent study on heterogeneous ice nucleation on a crystalline solid substrate, employing a forward flux sampling method, demonstrated28 that the commonly adopted size-based method using the order parameter q6, inadequately describes heterogeneous ice nucleation. Instead, the study highlighted the critical importance of considering the surface-induced geometric anisotropy of ice nuclei. Furthermore, it was reported that for other tetrahedral liquids like carbon29 and silicon30, the local q6 is not a suitable order parameter for enhanced sampling techniques, with q3 being more effective. These studies demonstrated that special care is necessary in selecting an appropriate order parameter when estimating the crystal nucleation rate, particularly when employing enhanced sampling techniques.
Given the unbiased simulation approach we employ to study ice nucleation, shape anisotropy may not pose a problem. However, a suitable order parameter remains crucial for accurately detecting crystal precursors and nuclei. Therefore, our aim is to identify an order parameter applicable to all tetrahedral liquids for this purpose. While the order parameter q6 can detect the six-fold symmetry of stable ices at ambient pressure, such as cubic and hexagonal ices, the ice formation pathway is not necessarily through a direct path but can involve Ice 0-like structures that contain five- or seven-membered rings24, as manifested by the Ostwald step rule31,32,33. To detect these structures, we need a coarse-grained bond orientational order parameter with 12-fold symmetry, Q12, capable of identifying all types of crystal structures in tetrahedral liquids. Indeed, we have confirmed that the local order parameter q6 tends to overidentify ice molecules in the liquid phase, whereas the coarse-grained order parameter utilising the 12th-order bond orientational order parameter, Q12, correctly identifies ice molecules and even outperforms q3 (refer to Fig. 1a–c and Supplementary Fig. 1). This issue may not significantly affect the estimation of nucleation rates in bulk systems. However, in situations where surfaces induce ordering with symmetries other than 6-fold, as in our case, utilising q6 for biasing could lead to incorrect conclusions.
To directly explore the microscopic kinetic pathway of ice nucleation, we conduct a series of extensive brute-force molecular dynamics (MD) simulations utilising the coarse-grained mW water model. To avoid potential curvature-induced effects, our initial focus is on studying free-standing water films featuring zero-mean-curvature vapour-liquid interfaces. Our approach involves a comprehensive analysis, employing topological ring analysis and the high-degree bond-orientational order parameter Q12. The Q12 order parameter can pick up any crystal forms of water, including Ice 024. These tools allow us to quantitatively assess the relative arrangement of neighbouring water molecules, enabling the identification of ice-crystal precursors, colloquially referred to as preorders. These preorders exhibit a liquid state but possess crystal-like local orientational order. The utilisation of these advanced techniques helped us overcome the limitations associated with standard crystalline ice identification methods, ensuring an unbiased identification of preorders—precursors—from which ice crystals are anticipated to form. Our results furnish robust numerical evidence supporting free-surface-assisted ice nucleation, occurring near the free surface but slightly inward. Ice nucleation starts from the formation of Ice 0-like precursors near the free surface, but the precursors quickly transform more stable ordinary ices. Subsequently, we unravel an unconventional microscopic physical mechanism and kinetic pathway that facilitates ice nucleation in close proximity to the free surface through ice precursors. Finally, we demonstrate the relevance of our microscopic ice nucleation mechanism by extending our investigation to nanodroplets of the mW water model and thin films of the realistic TIP4P/ice water model27.
Results
Preferential ice nucleation location in thin water films
First, we explain our strategy to attack a controversial and longstanding problem concerning whether a free water surface can facilitate ice nucleation or not. In earlier works14,15,19,25, the ice nucleation rates of free-standing water films were estimated using enhanced sampling methods, such as forward-flux sampling34 and umbrella sampling methods35. The cumulative transition probabilities were used to quantify the nucleation rates in both thin films and bulk water. However, the properties of the free surface are pretty complicated; for example, the surface structure is strongly distorted due to the symmetry breaking at the interface14,15,19,25,36,37. Accordingly, the dynamics near the free surface is also different from the bulk36,38,39. Hence, it has been considered reasonable if the ice nucleation rate is slower for a free-standing film than the bulk.
Instead, we ask whether a free water surface can induce nucleation and whether a preferential location of ice nucleation exists. To answer these questions, we directly detect the birth location of ice nuclei during the nucleation process by brute-force MD simulations (see Supplementary Movie 1). Figure 1d depicts the relative position where ice nuclei are born. It shows that the ice nuclei are still small initially and fluctuate across the water film. As the largest nucleus grows and reaches the critical nucleus size, the first ice crystal is born in the sub-surface region (see the image in Fig. 1d) and then increases its size linearly with time. We also show the microscopic dynamic process of ice nucleation in the water film in Supplementary Movie 1. It is suggestive of free-surface-assisted ice nucleation. We also show the histogram of ice crystals of different sizes as a function of the distance from the film centre in Fig. 1e. We observe that ice crystals are more likely to nucleate in the sub-surface region (not directly on the surfaces) than in the middle region, based on statistics from over 100 independent trajectories. The symmetric double-peak distribution of the ice nucleation probability (predominantly cubic ices) near the two surfaces of the water film strongly supports free-surface-induced ice nucleation.
Moreover, we directly measure the nucleation rates of both water films and bulk water. Nucleation is inherently a stochastic process; therefore, even for the same system, we must wait for varying time intervals to observe nucleation events. In this context, we determine the birth time of the first crystal, referred to as the induction time tind, for each trajectory by monitoring the time evolution of potential energy (refer to Supplementary Fig. 2a). Utilising the distribution of induction times tind, we estimate the probability for a single simulation trajectory to remain in the liquid state at time t, denoted as Pliq(t). The results are shown in Supplementary Fig. 2b (see “Methods” for the definition). We quantify the nucleation rate R by fitting a stretched exponential function to Pliq(t) (see “Methods” for the details).
In Fig. 1f, we illustrate the comparison of nucleation rates per volume, R/V (nm−3s−1), between bulk water and water films. Our calculated nucleation rate for bulk water aligns well with the results reported in refs. 25,38. Notably, the nucleation rate in the water film surpasses that of the bulk, exhibiting an increasing trend as the water film thickness decreases. This observation aligns with our visual evidence that ice crystals tend to form predominantly in the sub-surface regions of a thin water film, as depicted in Fig. 1d and e. Here, it is worth noting that in thin films, crystal nucleation is influenced by dynamic capillary waves, a factor absent in quiescent bulk states. We plan to investigate the impact of this effect on crystal nucleation and growth in future studies.
Our findings diverge qualitatively from earlier results obtained using the same mW water model. In 2003, Lü et al.38 demonstrated that the total nucleation rate of water films increases and approaches the bulk one when the thickness of films increases. They reported that the ice nucleation rate decreases by only about a factor of two for the thinnest film (4.72 nm) compared to the bulk. On the contrary, Haji-Akbari et al. reported a significantly more pronounced decrease in the nucleation rate by two to three orders of magnitude in 5-nm-thick films and a decline of seven orders of magnitude for 2.5-nm-thick films14. It is important to note that Lü et al.38 and Haji-Akbari et al.14 employed different enhanced sampling methods, namely, the mean first-passage time vs. forward-flux sampling, and different order parameters to identify ice molecules, i.e., the CHILL algorithm40 vs. q614,15,19, respectively. Additionally, a recent study by Hayton et al.26, utilising a seeding technique, further supported the notion that the nucleation rate is lower for thin films compared to the bulk.
Now, we consider the reasons for the disparity in conclusions between our study and those mentioned above. As discussed earlier, sampling methods are highly sensitive to the choice of order parameters associated with crystals. The previous studies mentioned above utilised the CHILL algorithm or q6 order parameters, assuming the relevant ice type to be ice I, i.e., cubic or hexagonal ices. However, as we will demonstrate later, this assumption might not be valid. For tetrahedral liquids, such as water, the most relevant order parameter is Q1224, involving its 16 neighbours, as it can detect any crystals favoured by local tetrahedral symmetry, including Ice 0 and Clathrate. We employ this order parameter to identify ice-like preorders and ice crystals.
Moreover, it is crucial to note that while seeding techniques may prove valuable for examining crystal nucleation behaviours, their efficacy in investigating the influence of the free surface on ice nucleation could be questionable. Ice nucleation near a free surface may follow a distinct kinetic pathway involving Ice 0-like precursors, adding complexity to the process. Unlike in bulk, the selection of the seed’s position and shape may also play a crucial role in estimating the nucleation rate in the presence of symmetry-breaking surface fields.
Taking these factors into consideration, we assert that a direct approach—employing brute-force simulations—provides a more thorough and convincing estimation of the crystal nucleation rate in free-standing films, compared to enhanced sampling algorithms or seeding methods, even though this method demands more computation time.
Surface-induced nucleation mechanism
Due to its unique structural and mechanical properties, the water surface plays a crucial role in ice nucleation. For instance, Odendah et al.41 recently reported that water and ice share similar characteristic structural features, implying the presence of nanometre-scale ice-like domains at the air-water interface. In our work, we also observe a layering phenomenon and ordered structure near the free water surface in Fig. 2a, suggesting a structured liquid at the surface. Upon closer examination of the first few layers of the water surface, we identify an ordered local structure (red region) in the 2D plane of the well-defined outermost two molecular layers, composed of five-, six-, and seven-membered rings (see the region inside the green square in Fig. 2b). A recent experimental study of 2D ice crystals formed on a solid substrate using scanning tunnelling microscopy (STM) indicates that the preordered structure of 2D hexagonal ice consists of abundant five-, six-, and seven-membered rings42. This implies that the water surface possesses a 2D hexagonal ice-like local structure. Moreover, by comparing the angular distribution of a water molecule with its neighbours in the 2D plane parallel to the water surface, we also observe pronounced peaks in the angular distribution of water molecules in the first two layers, s1 and s2 (see the cyan-shaded region in Fig. 2a), similar to the 2D hexagonal ice. The peak position in the three-body-angle distribution is at 120° (see Fig. 2c). Therefore, both previous results and our observations seem to indicate that the ice-like ordered water surface may aid in facilitating crystallisation, contrary to the notion of ‘bad’ ordering suppressing nucleation reported in previous works7,14,15,19.
Consequently, assuming the presence of surface-induced precursors on the water surface appears to be physically reasonable. We use the 2D orientational order parameter \({\overline{\lambda }}_{1}\) (see “Methods” for the definition) to quantify the surface structural order and its correlation with ice nucleation in the sub-surface region seen in Fig. 1. As shown in Supplementary Fig. 3a and b, we also find highly ordered surface molecules (indicated by green beads), which strongly correlate with the ice precursors and ice clusters formed in the interior yet close to the surface. This result is consistent with the scenario of surface-induced ice nucleation in free-standing films. However, it is essential to note that ice nuclei are formed predominantly in the sub-surface regions, not directly on the free surfaces, as depicted in Fig. 1d and e. Hence, the critical question arises: whether the 2D ice-like order of the surfaces is responsible for ice nucleation, or if some other source plays a more dominant role in inducing ice nucleation in the sub-surface regions. Below, we will show that the latter is the case.
To address this question, analysing water structures in the sub-surface regions is crucial. In this context, we opt for ring analysis as an alternative to the conventional bond-orientational order parameter. This choice is motivated by the surface’s potential to distort the symmetry of locally ordered structures in its vicinity, a phenomenon absent in the bulk. A striking revelation emerges from our analysis: 5-membered rings are significantly more abundant at the surface than in the bulk and extend deep into the interior of the water film, reaching a characteristic length of 1.5 nm, as illustrated in Fig. 2d. The 5-membered ring exhibits a preference in energy over the 4-membered ring and a greater favorability in entropy than the 6-membered ring. This competition, coupled with the surface constraint, serves as the origin for the enrichment of 5-membered rings at the surface.
Russo et al.24 reported the spontaneous creation of structural orders associated with a metastable ice form known as Ice 0, containing 5-, 6-, and 7-membered rings, in a supercooled state. These structures act as ice precursors by lowering the free-energy barrier of ice nucleation. Ice 0 structures exhibit two distinct local structural motifs24: (5,5,5,5,6,6) and (5,5,5,7,6,6), as depicted in Fig. 2e, where the numbers 5, 6, and 7 indicate the count of water molecules in rings including the central molecule as a member. It was shown24 that Ice 0-like structures (see Fig. 2e) play a crucial role in the ice nucleation of bulk water. These structures are more readily formed in supercooled water than Ice I-type orders (cubic and hexagonal arrangements) since their ring distribution closely resembles that of liquid water. A molecule is classified as Ice 0-like if at least five of its six rings closely match the Ice 0 ring structures illustrated in Fig. 2e. These Ice 0-like preorders play a pivotal role in fostering the nucleation of ice crystals by substantially diminishing the crystal-liquid interfacial energy cost24. Ice 0-like structures are not stable, and as the order develops, they undergo rapid transformation into ordinary ices, predominantly in cubic ices, without forming Ice 024.
Interestingly, we observe an abundance of Ice 0-like preordered structures in the sub-surface regions. In Fig. 2f, the density of Ice 0-like precursors, \({\rho }_{{{{{{{\rm{{I}}}}}}_{0}-like}}}\), in the pink-shaded region exhibits a prominent maximum near the position adjacent to the 2D ice-like surface layers (see the blue-shaded region). Notably, the characteristic thickness of this sub-surface region is \(\sim \)1.5 nm, as observed in Fig. 2f. The pressure within the water film, both in the normal and lateral directions, is negative in these sub-surface regions (the pink-shaded regions). It is known24 that for the bulk case, the fraction of Ice 0-like molecules increases as pressure decreases (see Supplementary Fig. 4). In connection with this, it is worth noting that the homogeneous ice nucleation rate is enhanced under negative pressures43. Hence, we deduce that the abundant Ice 0-like environments stem from the surface-induced negative pressure in the sub-surface regions. Ice nuclei emerge in these preordered liquid environments, specifically in highly concentrated Ice 0-like environments, as illustrated in Fig. 2g. This surface-induced preordering in liquid water provides a free-energy-based rationale for surface-induced ice nucleation. Interestingly, a similar phenomenon of surface-induced nucleation in a negative pressure region was reported for silicon30, suggesting a general mechanism of surface-induced nucleation for tetrahedral liquids showing a density decrease upon solidification.
The above finding indicates that the primary role in surface-induced ice nucleation is played by Ice 0-like preordering in the sub-surface regions (the pink-shaded region in Fig. 2f) rather than 2D ice-like order on the surfaces (the blue-shaded region in Fig. 2f). Symmetry breaking at the surfaces not only induces layering, i.e., short-range translational order, leading to 2D ice-like order, but also stretches the surfaces, resulting in negative pressure in the sub-surface regions. While the former contributes to the induction of 2D ice-like order, the latter is more influential in enhancing Ice 0-like preorders. Our study suggests that the latter mechanism plays a more substantial role than the former in the formation of ice nuclei in water films. This observation may be attributed to the fact that, unlike the case of a solid substrate, the 2D ice order at the surface is not as robust due to surface fluctuations, i.e., capillary waves, which strongly perturb it.
Besides thermodynamic factors, dynamics is another crucial factor controlling crystal nucleation. The dynamics is also heterogeneously distributed in water films38,44. Specifically, the surface mobility of the mW water is slower than that of the interior (see Supplementary Fig. 5). For bulk water, Martin et al.45 proposed that ice nucleation in supercooled water occurs in less mobile liquid regions. This phenomenon can be explained through two steps. Firstly, preordered regions exhibit slower dynamics in a supercooled liquid46, and secondly, preorders facilitate crystal nucleation because of the angular symmetry matching33 that lowers the energy cost of the crystal-liquid interface47. The slower diffusion near the water surface suggested ordered surface structures, as shown in Supplementary Fig. 5b, providing additional support for the surface-induced ice nucleation mechanism described above.
Ice nucleation in a water nanodroplet
A water droplet is one of the most common forms of liquid water in nature and is crucial for atmospheric science, such as clouds5 and rains8. It is also of technological importance. A water droplet, characterised by a large surface-to-volume ratio, is widely employed to investigate the significance of the surface on water’s properties, including its impact on dynamic behaviours and ice nucleation.
To further confirm the effects of the free surface on nucleation, we directly measure the spatial distribution of Ice 0-like and ice molecules and track their evolutions in water droplets. Remarkably, nucleation events in water droplets are not random; instead, ice nuclei exhibit a higher probability of occurring in positions close to the surface in nanodroplets, as illustrated in Fig. 3a (see also Supplementary Movie 2). This behaviour is evident when projecting the positions of molecules belonging to ice precursors and crystals onto a 2D cross-section map, as shown in Fig. 3b. The distribution of ice molecules along the radial direction, depicted in Fig. 3c, aligns with the 2D spatial map of ice molecules (see the inset of Fig. 3c). We also provide a microscopic view of the dynamic ice nucleation process in the water droplet at 150 K in Supplementary Movie 2. This result strongly supports the surface-assisted nucleation mechanism for water droplets, a topic that has been debated for decades. Based on Fig. 3a and b, we can conclude that ice nucleation in water droplets occurs heterogeneously in space, facilitated by the curved surface. Our structural analysis further reveals the formation of Ice 0-like precursors near the surface, as evidenced by the distributions of ring structures and Ice 0-like structures along the droplet’s radial direction, as shown in Fig. 3d and e, respectively.
In water droplets, Ice 0-like structures are abundant in the sub-surface region and gradually decrease into the interior. Similar to water films, we observe a negative tangential pressure PT near the water droplet surface due to surface tension (see Fig. 3e), as reported by Li et al.25. We conclude that this surface-induced negative pressure is the physical reason for the rich Ice 0-like environments close to the droplet surface. As well-known, the surface curvature of a water droplet creates extra pressure called the Laplace pressure, PL = PN − PT, which increases the pressure inside the droplet. As the droplet size decreases, the internal pressure increases (PL), which tends to suppress the probability of a nucleation event in the droplet, as shown in Li et al.’s work25. However, due to the relatively low tangential pressure (PT) close to the surface, ice nucleation still prefers to occur near the surface for the droplet size studied here.
Comparison with TIP4P/Ice water model
As described above, the use of a coarse-grained water model (mW water in our case) provides us with the capability to directly observe the microscopic dynamics of ice nucleation, facilitated by its computational efficiency. However, there might be concerns regarding the reliability of this model in faithfully representing water properties, given that simulation outcomes can be influenced by the choice of force field and system size.
In this regard, the TIP4P/ice model stands out as one of the most accurate classical molecular models of water, particularly in describing ice formation. Nevertheless, the direct simulation of ice nucleation events using this water model proves challenging due to its computationally demanding nature. Recently, it has been demonstrated that crystal nucleation is initiated by the spontaneous formation of crystal precursors (or preordering) within a liquid state33,46. Consequently, our specific focus is directed towards exploring preordering rather than directly simulating nucleation events. To identify preorders, we employ ring analysis to capture the water structures near free surfaces, with the expectation that these structures would exhibit an Ice 0-like configuration, as observed in the results obtained with the mW water model. The ring and density distributions of Ice 0-like preordered structures are illustrated in Fig. 4a and b, respectively. Consistent with the mW water results (see Fig. 2), the fraction of the five-membered rings increases towards the surfaces, and the concentration of Ice 0-like structures, formed by hydrogen bonds, exhibits distinct maxima in the sub-surface regions.
It is reasonable to anticipate that ice crystals would more readily be nucleated in regions with a high degree of Ice 0-like preorder, as observed in the mW water case presented in this study and the bulk case24. Thus, our TIP4P/ice model results provide robust support for surface-induced freezing in real water. The notion of ‘bad’ interfacial ordering in prior works15 might be a misguided conclusion stemming from the usage of stable bulk ice orders (Ice c and h) as the critical structural order parameters to describe ice nucleation. These structures, associated with stable ices, differ significantly from those of liquid water (whether in the bulk or near the surface). Due to the high interfacial energy cost arising from the substantial structural differences between the crystal and liquid phases, direct nucleation of ordinary ices is not favoured. Instead, Ice 0-like precursors, exhibiting a ring distribution similar to that of liquid water, are demonstrated to be preferentially formed near the free water surfaces, acting as triggers for ice nucleation. This two-step-like ordering pathway aligns with Ostwald’s step rule of phase ordering24.
Discussion
Our work has unveiled a physical mechanism for free-surface-induced ice nucleation in water films and nanodroplets. In contrast to previous approaches that estimated cumulative transition probabilities based on the largest crystallite, we directly observed the microscopic kinetic pathway of ice nucleation using brute-force molecular dynamics simulations with the mW water model. Our findings indicate that ice nucleation events tend to occur near the surface region rather than in the middle, suggesting a higher probability of ice nucleation in thin films compared to bulk water.
While this observation aligns with previous computational studies of ice nucleation in TIP4P/ice model15,19 that demonstrated a significant increase in the nucleation rate for free-standing films, the fundamental explanations differ. Previous studies argued that the confinement effect enhances homogeneous ice nucleation in the middle of a thin water film, characterising the order at the free surface as a ‘bad’ order and the order in the interior region as a ‘good’ order. This assignment appears self-paradoxical, given the high nucleation rate for a thin film compared to the bulk. Our study may provide a resolution to this issue.
We have revealed that the surface-tension-induced negative pressure contributes to the enrichment of the 5-membered ring environment in the sub-surface regions, promoting local structural ordering in the form of Ice 0-like precursors. These precursors exhibit unique ring topologies that include 5-, 6-, and 7-membered rings. Unlike conventional ice forms that consist solely of six-membered rings, such as Ih and Ic, Ice 0-like structures exhibit significantly higher compatibility with liquid water compared to ordinary ice due to their topological resemblance, thereby reducing the interfacial energy required for ice nucleation. Additionally, they demonstrate an affinity for Ic, serving as precursors for ordinary ice24. Moreover, Ice 0-like structures, distinct from Ice 0 itself and lacking translational order, are hypothesised to act as precursors even in temperature ranges where Ice 0 is unstable. Local symmetry matching and the resulting transformability to a crystal are merely prerequisites for these structures to serve as precursors33,46. However, given that previous studies employing mW water have explored such temperature ranges14,15,19,25,26, this aspect warrants further careful investigation.
Notably, the abundance of Ice 0-like precursors in the sub-surface regions, just inward from the free surfaces where negative pressure prevails, aligns with the locations exhibiting the highest ice nucleation probability. It is crucial to emphasise that this negative-pressure-induced mechanism fundamentally differs from substrate-induced heterogeneous nucleation, where ice nucleation occurs directly on the surface through interactions with the substrate.
The ordering of water induced by the free surface should be regarded as a ‘good’ order, as it actively promotes ice nucleation in close proximity to the free surfaces of water. We advocate for characterising ice nucleation in nature as ‘heterogeneous (surface-induced)’ rather than ‘homogeneous’. These findings not only contribute to a fundamental comprehension of ice nucleation in water films and droplets but also hold significance for natural sciences such as climate science and various technological applications.
Here, we briefly explore the possibility of experimentally detecting surface-induced ice nucleation. In their study, Duft and Leisner compared the freezing probabilities of droplets with radii of 49 μm and 19 μm12. They concluded that homogeneous freezing is a volume-proportional process and that surface nucleation might only be significant, if at all, for much smaller droplets. As they acknowledged, in relatively large droplets, the volume of the thin surface region could be significantly smaller compared to the overall droplet volume. Our estimate suggests that the thickness of the surface region with enhanced ice nucleation frequency is ~2 nm. Consequently, when estimating ice nucleation frequencies per unit volume, observing the pronounced impact of free-surface-induced ice nucleation becomes challenging. There have been noteworthy experiments investigating ice nucleation rates in nanodroplets48,49,50. However, comparing these rates to those in bulk poses challenges, primarily due to the difficulty of accessing the bulk nucleation rate, coupled with the combined influence of surface effects and the Laplace pressure effect. Nevertheless, it is crucial to emphasise that experimental confirmation regarding the facilitation of ice nucleation by the free surface holds profound significance within the realm of fundamental scientific understanding.
In this context, our study provides compelling evidence for the surface-induced enhancement of ice nucleation in the mW water model, albeit with a relatively modest degree of enhancement. Moreover, we also observe robust support for surface-induced freezing in the realistic water model, specifically the TIP4P/ice model. To establish a more precise connection with experimental data, it is highly desirable to investigate the ice nucleation rate in thin films using a realistic water model, employing a robust method such as brute-force simulations.
Here, we note that the impact of surface-induced negative pressure on liquid structures and the resulting enhancement of order formation might have analogous effects in various materials, especially tetrahedral liquids like silicon, germanium, carbon, and silica. Notably, previous studies have reported similar free-surface-induced crystallisation in silicon30 and the Stillinger-Weber potential with λ = 2151. This raises an intriguing question regarding whether the surface-induced crystallisation in these systems shares a common mechanism with water or not.
Lastly, this study emphasises the importance of carefully choosing order parameters in biased simulations, commonly employed to investigate rare events such as crystal nucleation. The efficacy of these simulations relies on the judicious selection of order parameters that accurately characterise the kinetic pathways. Our findings underscore the critical nature of appropriate order parameter selection in biased simulations, as also discussed in Refs. 28,29,30.
Methods
We perform molecular dynamics simulations using a large-scale atomic/molecular massively parallel simulator (LAMMPS) for both mW and TIP4P/ice systems. Bulk water and films&droplets are conducted in the NPT and NVT ensembles, respectively, with periodic boundary conditions. The Nose-Hoover thermostat and the Parrimello-Rahman barostat are applied to control the temperature and pressure, respectively. The dimensions of the simulation boxes along x, y, and z directions are 9.44 nm, 9.44 nm, and 21 nm, respectively. The time step is 1 fs. 3D local structural order is analysed using the coarse-grained Steinhardt bond orientational order parameter Q1224 and the CHILL algorithm, whereas 2D structural order on the free surface is analysed using quasi-2D order parameter \({\overline{\lambda }}_{1}\).
Ice 0 has two different local environments around the central molecule: (5,5,5,5,6,6) and (5,5,5,7,6,6), as shown in Fig. 2e. A molecule is classified as Ice 0-like if at least 5 of the six rings around it with 16 neighbours within cutoff rc = 0.488 nm have the correct number of the Ice 0 ring members. fn indicates the fraction of the n-membered ring around a molecule.
Q 12 and connections
To characterise bond orientational order of ice-like structures, we use the coarse-grained order parameter, Q12, defined as follows24,
and then the averaged form is,
The scalar product between Q12,m of two molecules is defined as \({S}_{ij}={\sum }_{k=-12}^{12}{Q}_{12,m}(i){Q}_{12,m}^{*}(j)\). A pair of molecules i and j is identified as connected if Sij is larger than 0.75. If the number of connections that the molecules have is above 75% Nb(i), the molecule is identified as crystalline.
The CHILL algorithm
The local order around each water molecule i is defined by a local orientational bond order parameter vector ql with 2l+1 complex components,
where ql,m(i) projects the bond orientational order of the four closest neighbours of a molecule based on spherical harmonics. The alignment of the orientation of the local structures is measured by the normalised dot product of ql between each pair of neighbour molecules:
The quasi-2D ice nucleation
We chose the order parameter \({\overline{\lambda }}_{1}(i)\)52 to identify the crystal particles. However, the 2nd layer is not an exact 2D but a quasi-2D with bilayer substructures.
According to the distribution of \({\overline{\lambda }}_{1}(i)\) of interfacial liquid and ice, we can identify the ice molecules in the contact layer as follows.
\({\overline{\lambda }}_{1}(i)\le 0.23\) | liquid |
\(0.23 < {\overline{\lambda }}_{1}(i)\le 0.4\) | ice-preorder |
\({\overline{\lambda }}_{1}(i) > 0.4\) | ice |
Then, the ice molecules in the second layer are identified as
\({\overline{\lambda }}_{1}(i)\le 0.2\) | liquid |
\(0.2 < {\overline{\lambda }}_{1}(i)\le 0.26\) | ice-preorder |
\({\overline{\lambda }}_{1}(i) > 0.26\) | ice |
The estimation of the nucleation rate R
Here, we determine the waiting time, denoted as the induction time tind, for each trajectory through the time evolution of potential energy (refer to supplementary Fig. 2). Utilising the distribution of induction times for nucleation, we estimate the probability for a single simulation trajectory to remain in the liquid state at time t using the expression:
where \({N}_{{{{{{{\rm{sim}}}}}}}}\) represents the total number of simulations conducted for each system (in this case, 50), \({t}_{{{{{{{\rm{ind}}}}}}}}^{i}\) is the induction time determined for the i-th simulation, and Θ(x) is the Heaviside step function. Subsequently, applying Eq. (7), we derive Pliq(t). To assess the nucleation rate from the shape of Pliq(t), we employ a stretched exponential function:
where R denotes the nucleation rate. The values of R acquired by fitting this function to the Pliq(t) data are depicted in Fig. 1d.
Data availability
All study data are included within the article and Supplementary Information. Source data are provided with this paper.
Code availability
The simulation codes used in this study are available from the corresponding authors upon request.
References
Kulmala, M. How particles nucleate and grow. Science 302, 1000–1001 (2003).
Klemperer, W. & Vaida, V. Molecular complexes in close and far away. Proc. Natl. Acad. Sci. 103, 10584–10588 (2006).
Hock, C. et al. Calorimetric observation of the melting of free water nanoparticles at cryogenic temperatures. Phys. Rev. Lett. 103, 073401 (2009).
Bartels-Rausch, T. Ten things we need to know about ice and snow. Nature 494, 27–29 (2013).
Baker, M. B. Cloud microphysics and climate. Science 276, 1072–1078 (1997).
Herbert, R. J., Murray, B. J., Dobbie, S. J. & Koop, T. Sensitivity of liquid clouds to homogenous freezing parameterizations. Geophys. Res. Lett. 42, 1599–1605 (2015).
Haji-Akbari, A. Rating antifreeze proteins: Not a breeze. Proc. Natl. Acad. Sci. 113, 3714–3716 (2016).
Jenniskens, P. & Blake, D. F. Crystallization of amorphous water ice in the solar system. Astrophys. J. 473, 1104–1113 (1996).
Baker, M. B. & Peter, T. Small-scale cloud processes and climate. Nature 451, 299–300 (2008).
Tabazadeh, A., Djikaev, Y. S. & Reiss, H. Surface crystallization of supercooled water in clouds. Proc. Natl. Acad. Sci. 99, 15873–15878 (2002).
Djikaev, Y. S., Tabazadeh, A., Hamill, P. & Reiss, H. Thermodynamic conditions for the surface-stimulated crystallization of atmospheric droplets. J. Phys. Chem. A 106, 10247–10253 (2002).
Duft, D. & Leisner, T. Laboratory evidence for volume-dominated nucleation of ice in supercooled water microdroplets. Atmos. Chem. Phys. 4, 1997–2000 (2004).
Gurganus, C., Kostinski, A. B. & Shaw, R. A. Fast imaging of freezing drops: No preference for nucleation at the contact line. J. Phys. Chem. Lett. 2, 1449–1454 (2011).
Haji-Akbari, A., DeFever, R. S., Sarupria, S. & Debenedetti, P. G. Suppression of sub-surface freezing in free-standing thin films of a coarse-grained model of water. Phys. Chem. Chem. Phys. 16, 25916–25927 (2014).
Haji-Akbari, A. & Debenedetti, P. G. Perspective: Surface freezing in water: a nexus of experiments and simulations. J. Chem. Phys. 147, 060901 (2017).
Vrbka, L. & Jungwirth, P. Homogeneous freezing of water starts in the subsurface. J. Phys. Chem. B 110, 18126–18129 (2006).
Vrbka, L. & Jungwirth, P. Molecular dynamics simulations of freezing of water and salt solutions. J. Mol. Liq. 134, 64–70 (2007).
Vácha, R. et al. Mechanism of interaction of monovalent ions with phosphatidylcholine lipid membranes. J. Phys. Chem. B 114, 9504–9509 (2010).
Haji-Akbari, A. & Debenedetti, P. G. Computational investigation of surface freezing in a molecular model of water. Proc. Natl. Acad. Sci. 114, 3316–3321 (2017).
Sanz, E. et al. Homogeneous ice nucleation at moderate supercooling from molecular simulation. J. Am. Chem. Soc. 135, 15008–15017 (2013).
Espinosa, J. R., Sanz, E., Valeriani, C. & Vega, C. Homogeneous ice nucleation evaluated for several water models. J. Chem. Phys. 141, 18C529 (2014).
Molinero, V. & Moore, E. B. Water modeled as an intermediate element between carbon and silicon. J. Phys. Chem. B 113, 4008–4016 (2008).
Sun, G., Giovambattista, N., Wang, E. & Xu, L. Effects of surface structure and solvophilicity on the crystallization of confined liquids. Soft Matter 9, 11374 (2013).
Russo, J., Romano, F. & Tanaka, H. New metastable form of ice and its role in the homogeneous crystallization of water. Nat. Mater. 13, 733–739 (2014).
Li, T., Donadio, D. & Galli, G. Ice nucleation at the nanoscale probes no man’s land of water. Nat. Commun. 4, 1887 (2013).
Hayton, J. A., Davies, M. B., Whale, T. F., Michaelides, A. & Cox, S. J. The limit of macroscopic homogeneous ice nucleation at the nanoscale. Faraday Discuss. 249, 210–228 (2024).
Abascal, J. L. F., Sanz, E., García Fernández, R. & Vega, C. A potential model for the study of ices and amorphous water: TIP4P/Ice. J. Chem. Phys. 122, 234511 (2005).
Zhao, W. & Li, T. On the challenge of sampling multiple nucleation pathways: a case study of heterogeneous ice nucleation on FCC (211) surface. J. Chem. Phys. 158, 124501 (2023).
Ghiringhelli, L. M., Valeriani, C., Meijer, E. J. & Frenkel, D. Local structure of liquid carbon controls diamond nucleation. Phys. Rev. Lett. 99, 055702 (2007).
Li, T., Donadio, D., Ghiringhelli, L. M. & Galli, G. Surface-induced crystallization in supercooled tetrahedral liquids. Nat. Mater. 8, 726–730 (2009).
Ostwald, W. Studies on the formation and change of solid matter. Z. Phys. Chem. 22, 289–302 (1897).
ten Wolde, P. R. & Frenkel, D. Homogeneous nucleation and the Ostwald step rule. Phys. Chem. Chem. Phys. 1, 2191–2196 (1999).
Russo, J. & Tanaka, H. Crystal nucleation as the ordering of multiple order parameters. J. Chem. Phys. 145, 211801 (2016).
Allen, R. J., Frenkel, D. & ten Wolde, P. R. Forward flux sampling-type schemes for simulating rare events: Efficiency analysis. J. Chem. Phys. 124, 194111 (2006).
Torrie, G. M. & Valleau, J. P. Nonphysical sampling distributions in Monte Carlo free-energy estimation: Umbrella sampling. J. Comput. Phys. 23, 187–199 (1977).
Sun, G., Saw, S., Douglass, I. & Harrowell, P. Structural origin of enhanced dynamics at the surface of a glassy alloy. Phys. Rev. Lett. 119, 245501 (2017).
He, Y., Sun, G., Koga, K. & Xu, L. Electrostatic field-exposed water in nanotube at constant axial pressure. Sci. Rep. 4, 6596 (2014).
Lü, Y., Zhang, X. & Chen, M. Size effect on nucleation rate for homogeneous crystallization of nanoscale water film. J. Phys. Chem. B 117, 10241–10249 (2013).
Sun, G., Hawken, A. & Harrowell, P. The displacement field associated with the freezing of a melt and its role in determining crystal growth kinetics. Proc. Natl. Acad. Sci. 117, 3421–3426 (2020).
Moore, E. B., de la Llave, E., Welke, K., Scherlis, D. A. & Molinero, V. Freezing, melting and structure of ice in a hydrophilic nanopore. Phys. Chem. Chem. Phys. 12, 4124 (2010).
Odendahl, N. L. & Geissler, P. L. Local ice-like structure at the liquid water surface. J. Am. Chem. Soc. 144, 11178–11188 (2022).
Ma, R. et al. Atomic imaging of the edge structure and growth of a two-dimensional hexagonal ice. Nature 577, 60–63 (2020).
Rosky, E., Cantrell, W., Li, T. & Shaw, R. A. Homogeneous ice nucleation rate at negative pressures: The role of the density anomaly. Chem. Phys. Lett. 789, 139289 (2022).
Gasparotto, P., Fitzner, M., Cox, S. J., Sosso, G. C. & Michaelides, A. How do interfaces alter the dynamics of supercooled water? Nanoscale 14, 4254–4262 (2022).
Fitzner, M., Sosso, G. C., Cox, S. J. & Michaelides, A. Ice is born in low-mobility regions of supercooled liquid water. Proc. Natl. Acad. Sci. 116, 2009–2014 (2019).
Tanaka, H. Bond orientational order in liquids: Towards a unified description of water-like anomalies, liquid-liquid transition, glass transition, and crystallization. Eur. Phys. J. E 35, 1–84 (2012).
Russo, J., Romano, F. & Tanaka, H. Glass forming ability in systems with competing orderings. Phys. Rev. X 8, 021040 (2018).
Huang, J. & Bartell, L. S. Kinetics of homogeneous nucleation in the freezing of large water clusters. J. Phys. Chem. 99, 3924–3931 (1995).
Manka, A. et al. Freezing water in no-man’s land. Phys. Chem. Chem. Phys. 14, 4505–4516 (2012).
Bhabhe, A., Pathak, H. & Wyslouzil, B. E. Freezing of heavy water (D2O) nanodroplets. J. Phys. Chem. A 117, 5472–5482 (2013).
Gianetti, M. M., Haji-Akbari, A., Longinotti, M. P. & Debenedetti, P. G. Computational investigation of structure, dynamics and nucleation kinetics of a family of modified Stillinger–Weber model fluids in bulk and free-standing thin films. Phys. Chem. Chem. Phys. 18, 4102–4111 (2016).
Eslami, H., Sedaghat, P. & Müller-Plathe, F. Local bond order parameters for accurate determination of crystal structures in two and three dimensions. Phys. Chem. Chem. Phys. 20, 27059–27068 (2018).
Acknowledgements
This work was supported mainly by the “Frost Protection Science” project at the Institute of Industrial Science, the University of Tokyo, which was established as one of the social cooperation programs under the agreement between the University of Tokyo and Daikin Industries, Ltd. The work was also supported partially by Specially Promoted Research (JP20H05619). from the Japan Society of the Promotion of Science (JSPS).
Author information
Authors and Affiliations
Contributions
H.T. designed and supervised the project. G.S. performed research; G.S. and H.T. analysed data and wrote the paper together.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sun, G., Tanaka, H. Surface-induced water crystallisation driven by precursors formed in negative pressure regions. Nat Commun 15, 6083 (2024). https://doi.org/10.1038/s41467-024-50188-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-50188-1
- Springer Nature Limited