Abstract
Having the excellent catalytic performance, single atom catalysts (SACs) arouse extensive research interest. However, the application of SACs is hindered by the lack of versatile and scalable preparation approaches. Here, we show a precursor-atomization strategy to produce SACs, involving the spray of droplets of solutions containing metal precursors onto support surface through ultrasonic atomization and the subsequent calcination. This approach is versatile to successful synthesis of a series of catalysts, including 19 SACs with different metal sites and supports and 3 derivatives of SACs (single atom alloys, double atom catalysts and bi-metallic SACs). Furthermore, it can be scaled up by a homemade production line with productivity over 1 kg day−1, and the well-controlled catalyst uniformity is evidenced by the identical characterization results and catalytic properties in Suzuki-Miyaura cross-coupling. This strategy lays a foundation for further investigation and may accelerate the trend from basic research to industrial applications of SACs.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Single-atom catalysts (SACs), featured with spatially isolated metal atoms on underlying supports, are regarded as a class of promising materials1, because they integrate the merits of homogeneous catalysts (high atom utilization, activity, and selectivity) and heterogeneous ones (good stability and reusability)2, and show superior catalytic performance in practical application, including high-value chemicals production3, energy conversion4, and pollution eliminating5. However, it is still widely recognized plenty of unknowns of SACs to be explored6,7, including discovering unique catalytic properties8,9, understanding structure–performance relations10,11, and realizing industrial applications12.
The prerequisite for the further study of SACs is to develop flexible and scalable preparation methods13, but it remains a great challenge.
First, developing a general route to fabricate various SACs with different metal sites and supports is very difficult14,15,16, due to their obviously different physical/chemical properties, including but not limited to the solubility, reactivity, and thermal stability of metal precursors as well as the surface coordination environments and hydrophilic/hydrophobic properties of supports17.
Second, the scaling-up effect seriously hampers the mass production of SACs18,19. Take the commonly used wet-chemistry approaches (e.g., impregnation20, hydrothermal treatment21, co-precipitation22, etc.) as examples. The synthesis conditions, such as concentration, temperature, stirring rate, and solution pH, have a noticeable influence on the aggregation states of the metal species23. Although these conditions can be well controlled on a lab scale (so the atomically dispersed structure is obtained), it is almost impossible to realize on a plant scale on account of the inevitable uneven mass transfer and heat transfer, leading to the excessive local concentrations and then the undesired aggregation of metal species24. One of the solutions is to introduce continuous preparation methods (increasing the production over time) instead of the current batch-type ones, but the relative reports are very rare25,26.
Therefore, it is a scientific and technological imperative to develop a versatile, continuous, and straightforward strategy to fabricate SACs.
In this work, we report a precursor-atomization strategy for the synthesis of SACs and their derivatives, and the whole fabrication process includes only two steps: Step 1, the dilute solution of the precursors is atomized and sprayed onto the supports; Step 2, the above samples undergo heat treatment to decompose the precursors, and the corresponding SACs are obtained. It is worth noting that according to this simple method we can build up SACs libraries for apparently various different metal‐support combinations (as many as 19 SACs and 3 derivatives) without any special precautions and the productivity can reach 1 kg day−1 by a homemade production line.
Results
Synthesis of Pd SACs with the precursor-atomization strategy
The homemade equipment was shown in Supplementary Fig. 1, which was composed of an ultrasonic atomizer (to atomize the precursor solution), three infrared lamps and a heating plate (to remove the solvent quickly), and a plastic dome shield and an iron basin (to confine the atomization in a relatively enclosed space and facilitate the recycling of the unemployed precursors, details see the “Methods” section).
Here we take Pd1/FeOx as an example to show the synthesis process (Fig. 1a). The aqueous solution of tetraamminepalladium nitrate ([Pd(NH3)4](NO3)2, 2.45 mmol L−1) was atomized into very small drops of ~40 μm3 in volume by an ultrasonic atomizer27,28 and sprayed at a rate of ~40 mL h−1 onto FeOx, which was spread out evenly on the iron basin. The infrared lamps and the heating plate were employed to remove the moisture quickly by heating the FeOx powders to over 60 °C. After being sprayed, the sample was carefully collected and calcined at 400 °C in a tube furnace29,30.
To our great delight, there were no detectable Pd nanoparticles in the transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) images of Pd1/FeOx (Fig. 1b and Supplementary Fig. 2) and the corresponding element mapping results suggested that Pd species were uniformly distributed over Pd1/FeOx (Fig. 1c). Furthermore, from the aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC HAADF-STEM, Fig. 1d) image, isolated Pd atoms were clearly observed as bright dots. The inductively coupled plasma optical emission spectrometry (ICP–OES) and Brunauer–Emmet–Teller (BET) measurement revealed that the Pd loading and specific surface area of Pd1/FeOx was 0.27 wt% and 41.6 m2 g−1, respectively (Supplementary Table 1). The X-ray diffraction (XRD, Supplementary Fig. 2) pattern of Pd1/FeOx showed similar peaks as Fe2O3 (PDF#87-1165), without the Pd NPs or PdO peaks, indicating the well-dispersed Pd species in FeOx. There were two notable peaks at 1.5 and 2.9 Å (Fig. 1e), which can be ascribed to the Pd–O and Pd–O–Fe scattering paths, respectively, in agreement with the previous report31. It should be noted that the peak at 2.9 Å cannot be ascribed to the Pd–Pd scattering path (Pd foil, 2.5 Å) and Pd–O–Pd scattering path (PdO, 3.0 Å), which was further confirmed by the EXAFS fitting results of Pd1/FeOx that these fitting results were in good agreement with the original curves (Supplementary Fig. 3 and Supplementary Table 2). Furthermore, the quantitative structural parameters results (Supplementary Table 2) of Pd1/FeOx indicated that Pd atom was connected with four O atoms with a mean bond length of about 2.01 Å31. The wavelet transforms (WT) plot (Supplementary Fig. 4) of Pd1/FeOx showed the maximum peak at ~6.2 Å−1, corresponding to the Pd–O scattering path by comparing Pd foil with the intensity maxima of Pd–Pd at ~10.2 Å−1 31, which agreed with the EXAFS results in R space. These results further confirmed the dominant presence of atomically dispersed Pd species. In addition, as shown in X-ray absorption near edge structure (XANES) spectra (Fig. 1f), the absorption edge positions of Pd1/FeOx were situated between those of Pd foil and PdO, indicative of the positively charged Pd species. All these characterization results corroborated the successful synthesis of Pd SACs (Pd1/FeOx) via the precursor-atomization strategy.
In order to understand the formation process of Pd1/FeOx, the samples (Pd1/FeOx-uncalcined), which were after being sprayed but before being calcined, were also characterized. The visible Pd atoms in AC HAADF image (Fig. 1g) and the absence of Pd–Pd bonds in EXAFS results (Fig. 1e) co-indicated that the Pd species were spatially isolated, demonstrating the molecularly dispersed states of the precursors ([Pd(NH3)4](NO3)2). Considering the complete decomposition temperature of [Pd(NH3)4](NO3)2 was about 270 °C (Supplementary Fig. 5), the samples above were subsequently treated at 400 °C, which was higher than the decomposition temperature but much lower than the migration temperature of noble metal species on metal oxide supports32,33, ensuring the transformation of molecularly dispersed [Pd(NH3)4](NO3)2 into atomically dispersed Pd atoms after calcination (i.e., Pd1/FeOx was fabricated).
The versatility of the precursor-atomization strategy
Surprisingly, the precursor-atomization strategy is of extraordinary flexibility for SACs fabrication through adjusting preparation parameters, including the type of precursors and the supports (details see Supplementary Table 3). These catalysts were characterized comprehensively by TEM, STEM, element mapping, X-ray absorption spectroscopy (XAS), XRD, ICP-OES, Elemental analysis (EA), and BET (see Supplementary Figs. 6–70 and Supplementary Tables 4–46) to determine the aggregation states and loadings of metal species as well as identify the texture properties of supports.
First, by simply replacing [Pd(NH3)4](NO3)2 with other precursors ([Pt(NH3)4](NO3)2, Ru(NO)(NO3)x(OH)y, Mn(NO3)2·4H2O, Fe(NO3)3·9H2O, Co(NO3)2·6H2O, Ni(NO3)2·6H2O and Zn(NO3)2·6H2O) and replacing FeOx with other supports (Al2O3, TiO2, MnOx, ZnO, and nitrogen-doped carbon (N–C)), as many as 18 SACs were also prepared. As shown in Fig. 2, the atomically dispersed nature of metal species was co-demonstrated by AC HAADF-STEM images (isolated metal atoms distributed throughout the supports) and EXAFS results (no corresponding metal–metal bond detected).
Moreover, to obtain Pd1/Cu single atom alloys (SAAs)6, the H2PdCl4 solution was sprayed on the Cu powders directly (Fig. 3a–d). As shown in Fig. 3a, there were bright dots in the catalysts of Pd1/Cu, which can be ascribed to the isolated Pd atoms, and the mapping result also indicated the homogenous distribution of Pd species (Fig. 3b). The EXAFS result showed no Pd–Pd bonds, and the fitting results indicated the presence of a Pd–Cu bond with the coordination numbers of ~8, similar to the previous reports of palladium–copper SAAs18,34 (Fig. 3c and Supplementary Fig. 62; Supplementary Table 41). The XANES and XRD results revealed that both the Pd and Cu species were primarily in the metallic states (Fig. 3d and Supplementary Fig. 60). Combining the results above, it was concluded that the Pd1/Cu SAAs were successfully fabricated. In addition, when we replaced [Pd(NH3)4](NO3)2 by C6H10Cl2Pd2 as the precursor, Pd DACs7,35 were obtained (Pd2/FeOx, Fig. 3e–h), featured with 3.15 Å distance between the adjacent Pd atoms in AC HAADF-STEM images (Fig. 3e, f), and exhibited the dominant peak at 1.6 Å in EXAFS results with the absence of the signal for Pd–Pd bond (2.5 Å, Fig. 3g). XANES result (Fig. 3h) suggested the positively charged Pd species on Pd2/FeOx, similar with those on Pd1/FeOx. The results above demonstrated a unique configuration of DACs that were composed of spatially adjacent atoms without strong electronic interaction. Furthermore, when the solutions of [Pd(NH3)4](NO3)2 and [Pt(NH3)4](NO3)2 were subsequently sprayed to FeOx, bi-metallic SACs36,37 (e.g., Pd1–Pt1/FeOx, Fig. 3i–l) were obtained, which were confirmed by the AC HAADF-STEM image (the two metal species were atomically dispersed, Fig. 3i), element mapping analysis (Pd and Pt species were homogeneously distributed, Fig. 3j), and the EXAFS results (no Pd–Pd and Pt–Pt bond, Fig. 3k, l). The high flexibility of this approach for the combination of the catalytically active sites and underlying supports constructs a huge SACs matrix, which facilitates further exploration of practical applications.
The large-scale production of Pd1/FeOx SACs
Besides, the precursor-atomization strategy has great potentials for mass production of SACs. To fulfill the strategy, we designed a homemade production line (Fig. 4a, Supplementary Fig. 71, <$1000 in cost and <4 m2 in floor area), which was composed of 34 ultrasonic atomizers, 16 infrared lamps, and 2 pieces of 2-m-long conveyor belts (to enable Step 1 (i.e., the spray of precursor solution onto the support surface) to be carried out continuously). The continuous synthesis process was shown in Supplementary Video 1. In addition, the productivity for Pd1/FeOx discussed below can reach more than 1 kg day−1 (Supplementary Fig. 72).
The supports, i.e., FeOx, were spread out evenly (areal density: ~120 g m−2) on the conveyor belt (running speed: ~1 cm min−1), and it took about 6 h to complete the transfer (4 m long in total). Two conveyor belts were connected end to end, and the first conveyor belt was ~10 cm higher than the second one. As a result, FeOx was flipped over at the junction of the two conveyor belts and most of the surfaces of FeOx were exposed evenly. Similarly, the solution of [Pd(NH3)4](NO3)2 was atomized and sprayed at a rate of ~40 mL h−1 onto FeOx on the conveyor belts, and the infrared lamps were employed to keep the FeOx powders dry (temperature > 60 °C). After being sprayed, the sample was collected at the end of the second conveyor belt and then calcined at 400 °C in a tube furnace. Four batches (every batch ~10 g) were collected at different times (each about 50 min apart, denoted as Pd1/FeOx-1, Pd1/FeOx-2, Pd1/FeOx-3, and Pd1/FeOx-4, respectively) were selected for the further investigation of catalyst structures and catalytic performances.
The four catalysts showed similar Pd loadings (~0.23 wt%, Supplementary Tables 47, 49–51) and specific surface areas (~44 m2 g−1, Supplementary Tables 47, 49–51) as well as a homogeneous distribution of Pd species (element mapping, Supplementary Figs. 73, 75–77). Neither Pd/PdO characteristic signals in XRD patterns nor nanoparticles in TEM/STEM images were observed (Supplementary Figs. 73, 75–77). However, visible Pd atoms were present in AC HAADF-STEM images (Fig. 4b–e). Hence, it was deduced that the Pd species on all four catalysts were atomically dispersed. This was further supported by the very similar EXAFS and WT results for Pd1/FeOx-1and Pd1/FeOx-4 (Fig. 4f, g and Supplementary Figs. 74, 78; Supplementary Table 48, 52), including the coordination numbers (~4) and bond lengths (~2.0 Å) of Pd–O shell. The XANES spectra (Fig. 4h) suggested the positively charged Pd species on both Pd1/FeOx-1 and Pd1/FeOx-4. In addition, XPS curves for Pd1/FeOx-2, Pd1/FeOx-3, and Pd1/FeOx-4 resembled that of Pd1/FeOx-1 (Fig. 4i) and thus indicated the primary presence of Pd2+ on all Pd1/FeOx catalysts38. Clearly, the structures of Pd species on the four Pd1/FeOx catalysts obtained at different time intervals were well retained, demonstrated by these complementary results above.
The remarkable catalytic properties of Pd SACs
Suzuki–Miyaura cross-coupling is a typical homogeneous catalysis process for the formation of C–C bonds using soluble Pd/organophosphine ligands complex as catalysts, which entails tedious separation steps after reactions, thus leading to the increased cost and processing time39,40. To address the challenge and considering that SACs may combine the advantages of both homogeneous and heterogeneous catalysts, we tentatively tested the performance of 19 prepared SACs above with bromobenzene and phenylboronic acid as model substrates at 40 °C without inert gas protection (Fig. 5a, all the selectivities >99%). Pd-based SACs exhibited higher catalytic activity than other SACs (including Pt, Ru, and non-noble metals-based SACs), mainly because Pd was the most active metal species in the Suzuki–Miyaura cross-coupling reaction. In addition, Pd1/FeOx-1 showed higher activity than Pd SACs on other underlying supports. According to the previous reports41, Suzuki–Miyaura cross-coupling reaction proceeds generally through a three-step pathway: oxidative addition, transmetalation, and reductive elimination, so the catalysts with superior redox properties are probably suitable for this reaction. In the H2 temperature programmed reduction (TPR) results (Supplementary Fig. 79), Pd1/FeOx-1 showed the initial reduction peak at a lower temperature (~110 °C) than Pd SACs on other underlying supports, demonstrating the superior redox properties and accordingly the remarkable catalytic properties in Suzuki–Miyaura cross-coupling reaction. Moreover, the activity of the screened-out SACs of Pd1/FeOx-1 was much higher than that of commercial Pd catalysts, like Pd(PPh3)4, Pd(NO3)2, Pd(OAc)2, [Pd(NH3)4](NO3)2, Pd/C, PdO, etc., as shown in Fig. 5b, which was also comparable with that of the top-tier heterogeneous catalysts under similar reaction conditions (Supplementary Table 53). To explore the ordinary compatibility of Pd1/FeOx-1 for the Suzuki–Miyaura cross-coupling reaction, the substrate scope was investigated using a variety of substituted aryl bromides and aryl boronic acids as raw materials. As shown in Fig. 6, under the optimized conditions, various combinations of aryl bromides with electron-donating and electron-withdrawing groups and aryl boronic acids with electron-donating and electron-withdrawing groups were successfully converted to the desired products, and excellent yields (93–99%) were successfully obtained without the protection of the inert atmosphere. The results thus suggested that Pd1/FeOx-1 exhibited a good substrate tolerance toward the Suzuki–Miyaura cross-coupling reaction.
Additionally, unlike the soluble catalysts (e.g., Pd(PPh3)4), Pd1/FeOx-1 can be easily separated by filtration, and no obvious activity loss was observed after 5 cycles (Fig. 5c). Notably, the AC HAADF-STEM image showed the catalysts maintained the atomically dispersed morphology after 5 catalytic runs (Supplementary Fig. 80) and the ICP results evidenced a negligible metal leaching in solutions. These results above indicated the superiority of Pd1/FeOx-1, including excellent catalytic properties, structural stability and recyclability. Remarkably, the catalysts of Pd1/FeOx-1, Pd1/FeOx-2, Pd1/FeOx-3, and Pd1/FeOx-4 exhibited very similar catalytic performance (see the small standard deviations for the TOFs of the four catalysts) under different reaction conditions, including temperatures (9493 ± 125, 23810 ± 1010, and 51,944 ± 1484 h−1 at 30, 40, and 50 °C, respectively, Fig. 5d), bases (10,818 ± 372, 23,810 ± 1010, and 10,355 ± 473 h−1 for Na2CO3, K2CO3, and K3PO4, respectively, Fig. 5e), or with different substrates (5995 ± 126 and 111,573 ± 4723 h−1 for aryl bromides bearing electron-donating and electron-withdrawing groups, respectively, Fig. 5f). Combined with the above results of structure characterizations, it demonstrated the identical catalytically active sites over the four Pd1/FeOx catalysts and thus the excellent reproducibility of our synthesis approach, which was significant for the subsequent industrial applications.
Discussion
In summary, we have developed a versatile precursor-atomization strategy with great potential to precisely manipulate and arrange the atoms to obtain a library for SACs (including 19 SACs as well as SAAs, DACs, and bi-metallic SACs), basically covering the widely concerned catalyst structures of SACs at present. A homemade production line is established for the large-scale synthesis of SACs and the productivity can be increased to over 1 kg day−1. The prepared Pd1/FeOx shows identical catalyst structures and catalytic properties in Suzuki–Miyaura cross-coupling irrespective of different batches in production, demonstrating the remarkable reproductivity and thus the great potential for the large-scale synthesis of SACs.
Methods
Catalyst preparation
Here, we took Pd1/FeOx as an example to illustrate the preparation process. The homemade equipment was shown in Supplementary Fig. 1, which was composed of an ultrasonic atomizer (Shenzhen Ikone Technology Co., Ltd), three infrared lamps (Royal Dutch Philips Electronics Ltd.), a heating plate, a plastic dome shield (ø 30 cm), an iron plate (ø 30 cm), and some cotton (for filling gap). First, take 12 g FeOx powders and spread them evenly on the iron plate. Then the tetraamminepalladium(II) nitrate aqueous solution (2.45 mmol/L) was sprayed onto the surface of FeOx through an atomizer with a rate of ~40 mL/h. To make the precursors deposit homogeneously onto the different surfaces of FeOx, the FeOx powders were re-spread every hour. After a cumulative consumption of 0.16 L of solution, samples were collected and then treated at 400 °C (heating rate: 5 °C/min) for 2 h under 100 mL/min airflow in a tube furnace (Hefei Kejing Material Technology Co., Ltd), and Pd1/FeOx (Pd: 0.27 wt%) was obtained. Afterward, the dome shield, iron dish, and cotton were thoroughly washed to recycle the unused precursors. Based on the ICP results, ~80% noble metal precursors ended up depositing on the supports, and ~7% on the plastic dome shield, the iron dish, and cotton, respectively, and the waste of precursors was <13%.
To verify the versatility of the precursor-atomization strategy, a series of catalysts, including Pd1/Al2O3, Pd1/MnOx, Pd1/ZnO, Pt1/Al2O3, Pt1/TiO2, Pt1/MnOx, Pt1/FeOx, Pt1/ZnO, Ru1/Al2O3, Ru1/TiO2, Ru1/MnOx, Ru1/FeOx, Ru1/ZnO, Mn1/N–C, Fe1/N–C, Co1/N–C, Ni1/N–C, Zn1/N–C, Pd1/Cu, Pd2/FeOx, and Pd1–Pt1/FeOx, were prepared with similar synthesis procedures and the detailed parameters were given in Supplementary Table 3. For convenience, simplified homemade equipment was used here, which was only composed of an ultrasonic atomizer, an infrared lamp, a turntable (Shenzhen Xuriqiqi Technology Co., Ltd), and a glass dish. N–C was prepared as follows: the mixture of carbon black and 2-methylimidazole (weight ratio is 1:1) was milled for 10 h at 400 r/min in a planetary ball mill (CHISHUN, QM3SP2).
The process of prepared Pd1/FeOx on a large scale was as follows. The homemade production line was shown in Supplementary Fig. 71, which was composed of 2 pieces of 2-m-long conveyor belts (0.5-m width, Dongguan Hengyuntong Industrial Equipment Co., Ltd.), 34 ultrasonic atomizers, and 16 infrared lamps. The first conveyor belt was ~10 cm higher than the second one, and the atomizers and infrared lamps were evenly distributed on both sides of the conveyor belts. FeOx evenly dispersed (~120 g/m2) on the surface of the conveyor belt was conveyed at a constant speed (~1 cm/min). Tetraamminepalladium(II) nitrate aqueous solution (2.45 mmol/L) was atomized and sprayed onto the FeOx through commercial ultrasonic atomizers (flow rate: ~40 mL/h). Afterward, the samples were collected at the end of the second conveyor belt and calcined in the tube furnace under airflow at 400 °C for 2 h.
Characterization
EA was performed on a Vario EL cube instrument, and ICP-OES was carried out on a PerkinElmer OPTIMA 8000DV. A Micromeritic ASAP2020M analyzer was employed to conduct BET surface area measurements at liquid nitrogen temperature. The samples underwent vacuum treatment for about 6 h at 200 °C prior to the measurement. XRD measurements were carried out on a Bruker D8 Advanced diffractometer and the 2θ range was 10–80°. XPS measurements were performed on an ESCALab250 XPS system equipped with an Al Kα source and a charge neutralizer, and all the binding energies were referenced to the contaminated C 1s (284.8 eV). Both TEM and STEM images were obtained on an FEI Tecnai G2 F30, which was operated at 300 kV. AC HAADF-STEM images and element mapping were obtained on a JEM-ARM200F transmission electron microscopy incorporated with double spherical aberration correctors, operating at 200 kV. X-ray absorption spectroscopy (XAS) measurements were conducted on BL14W beamline at the Shanghai Synchrotron Radiation Facility (SSRF), 20-BM-B beamline at the Advanced Photon Source at Argonne National Laboratory (APS), and Singapore Synchrotron Light Source (SSLS). The samples were measured in fluorescence mode using Lytle detector (SSRF), 32-element Ge solid state detector (APS), or silicon drift detector (SSLS) and the corresponding metal foils and metal oxides were used as reference samples and measured in the transmission mode. Thermogravimetric analysis (TGA) results were obtained using a TG209F1 libra instrument. 1H and 13C nuclear magnetic resonance (NMR) spectra were obtained on Bruker Avance III 500 HD. H2 TPR was performed on a DAS-7200.
Catalytic performance test
The typical performance evaluation was carried out as follows: bromobenzene (0.5 mmol), phenylboronic acid (0.75 mmol), K2CO3 (1.5 mmol), 5 mg Pd1/FeOx (Pd:substrate = 1:4000 (mol:mol)) and solvent (2 mL EtOH + 4 mL H2O) were added to a 25 mL Schlenk tube, using decane as an internal standard. The mixture in the tube was stirred at 40 °C in the air atmosphere. After the reaction, the cooled mixture was first extracted with ethyl acetate (3 mL × 3), and the organic phase was collected and dried over anhydrous sodium sulfate. Product yields of the reaction were measured using GC (Shimadzu 2010 GC Plus), and the structure of the products was confirmed by GC–MS (Shimadzu GCMS-QP2010 Ultra) analysis. The corresponding NMR data are provided in Supplementary information (Supplementary Figs. 81–100). The catalyst was filtered and washed with ethanol and water several times, dried at 80 °C for 10 h and calcined in the air at 400 °C for 2 h, and then reused for the next cycle experiment.
The TOF is calculated at <30% conversion level and the Pd dispersion is assumed to be 100% (Eq. (1)):
where n0 is the initial number of moles of the substrate, C is the conversion of the substrate at reaction time t, mcat is the weight of the catalyst, and ω is Pd loading.
The yield is based on the bromobenzene or its derivatives, using decane as the internal standard, and the calculation equation is shown as Eq. (2).
where n is the number of moles of the product, and n0 is the initial number of moles of the substrate.
The calculation equation of selectivity is shown as Eq. (3)
where n is the number of moles of product, n0 is the initial number of moles of the substrate, and C is the conversion of the substrate.
References
Wang, A. Q., Li, J. & Zhang, T. Heterogeneous single-atom catalysis. Nat. Rev. Chem. 2, 65–81 (2018).
Cui, X., Li, W., Ryabchuk, P., Junge, K. & Beller, M. Bridging homogeneous and heterogeneous catalysis by heterogeneous single-metal-site catalysts. Nat. Catal. 1, 385–397 (2018).
Zhang, L., Ren, Y., Liu, W., Wang, A. & Zhang, T. Single-atom catalyst: a rising star for green synthesis of fine chemicals. Natl Sci. Rev. 5, 653–672 (2018).
Ding, S., Hülsey, M. J., Pérez-Ramírez, J. & Yan, N. Transforming energy with single-atom catalysts. Joule 3, 2897–2929 (2019).
Beniya, A. & Higashi, S. Towards dense single-atom catalysts for future automotive applications. Nat. Catal. 2, 590–602 (2019).
Hannagan, R. T., Giannakakis, G., Flytzani-Stephanopoulos, M. & Sykes, E. C. H. Single-atom alloy catalysis. Chem. Rev. 120, 12044–12088 (2020).
Chen, Z. W., Chen, L. X., Yang, C. C. & Jiang, Q. Atomic (single, double, and triple atoms) catalysis: frontiers, opportunities, and challenges. J. Mater. Chem. A 7, 3492–3515 (2019).
Wang, Q. et al. Single iridium atom doped Ni2P catalyst for optimal oxygen evolution. J. Am. Chem. Soc. 143, 13605–13615 (2021).
Mitchell, S., Vorobyeva, E. & Perez-Ramirez, J. The multifaceted reactivity of single-atom heterogeneous catalysts. Angew. Chem. Int. Ed. 57, 15316–15329 (2018).
Liu, S. et al. Identify the activity origin of Pt single-atom catalyst via atom-by-atom counting. J. Am. Chem. Soc. 143, 15243–15249 (2021).
Tang, C. et al. Tailoring acidic oxygen reduction selectivity on single-atom catalysts via modification of first and second coordination spheres. J. Am. Chem. Soc. 143, 7819–7827 (2021).
Singh, B. et al. Single-atom catalysts: a sustainable pathway for the advanced catalytic applications. Small 17, e2006473 (2021).
Chen, Y. J. et al. Single-atom catalysts: synthetic strategies and electrochemical applications. Joule 2, 1242–1264 (2018).
Yang, H. et al. A universal ligand mediated method for large scale synthesis of transition metal single atom catalysts. Nat. Commun. 10, 4585 (2019).
He, X. et al. A versatile route to fabricate single atom catalysts with high chemoselectivity and regioselectivity in hydrogenation. Nat. Commun. 10, 3663 (2019).
Hai, X. et al. Scalable two-step annealing method for preparing ultra-high-density single-atom catalyst libraries. Nat. Nanotechnol. 17, 174–181 (2021).
Qin, R., Liu, K., Wu, Q. & Zheng, N. Surface coordination chemistry of atomically dispersed metal catalysts. Chem. Rev. 120, 11810–11899 (2020).
He, X. et al. Mechanochemical kilogram-scale synthesis of noble metal single-atom catalysts. Cell Rep. Phys. Sci. 1, 100004–100016 (2020).
Qu, Y. T. et al. Direct transformation of bulk copper into copper single sites via emitting and trapping of atoms. Nat. Catal. 1, 781–786 (2018).
Cao, S. F. et al. High-loading single Pt atom sites Pt–O(OH)(x) catalyze the CO PROX reaction with high activity and selectivity at mild conditions. Sci. Adv. 6, eaba3809 (2020).
Tao, H. et al. Nitrogen fixation by Ru single-atom electrocatalytic reduction. Chem 5, 204–214 (2019).
Qiao, B. et al. Single-atom catalysis of CO oxidation using Pt1/FeOx. Nat. Chem. 3, 634–641 (2011).
Ji, S. et al. Chemical synthesis of single atomic site catalysts. Chem. Rev. 120, 11900–11955 (2020).
Zhao, L. et al. Cascade anchoring strategy for general mass production of high-loading single-atomic metal-nitrogen catalysts. Nat. Commun. 10, 1278 (2019).
Liu, P. et al. Photochemical route for synthesizing atomically dispersed palladium catalysts. Science 352, 797–801 (2016).
Huang, L. et al. Quasi‐continuous synthesis of iron single atom catalysts via a microcapsule pyrolysis strategy. AIChE J. 67, e17197 (2021).
Ma, J. et al. Mass production of high-performance single atomic FeNC electrocatalysts via sequenced ultrasonic atomization and pyrolysis process. Sci. China Mater. 64, 631–641 (2020).
Kuai, L. et al. Atomically dispersed Pt/metal oxide mesoporous catalysts from synchronous pyrolysis–deposition route for water–gas shift reaction. Chem. Mater. 30, 5534–5538 (2018).
Zhang, X. et al. C-C coupling on single-atom-based heterogeneous catalyst. J. Am. Chem. Soc. 140, 954–962 (2018).
Kim, Y. et al. Surface density dependent catalytic activity of single palladium atoms supported on ceria. Angew. Chem. Int. Ed. 60, 22769–22775 (2021).
Xu, H. et al. Entropy-stabilized single-atom Pd catalysts via high-entropy fluorite oxide supports. Nat. Commun. 11, 3908–3908 (2020).
Jones, J. et al. Thermally stable single-atom platinum-on-ceria catalysts via atom trapping. Science 353, 150–154 (2016).
Lang, R. et al. Non-defect-stabilized thermally stable single-atom catalyst. Nat. Commun. 10, 234 (2019).
Pei, G., Liu, X., Chai, M., Wang, A. & Zhang, T. Isolation of Pd atoms by Cu for semi-hydrogenation of acetylene: effects of Cu loading. Chin. J. Catal. 38, 1540–1548 (2017).
Zhang, N. et al. A supported Pd2 dual-atom site catalyst for efficient electrochemical CO2 reduction. Angew. Chem. Int. Ed. 60, 13388–13393 (2021).
Zhao, X., Wang, F., Kong, X. P., Fang, R. & Li, Y. Dual-metal hetero-single-atoms with different coordination for efficient synergistic catalysis. J. Am. Chem. Soc. 143, 16068–16077 (2021).
Tong, M. et al. Operando cooperated catalytic mechanism of atomically dispersed Cu–N4 and Zn–N4 for promoting oxygen reduction reaction. Angew. Chem. Int. Ed. 60, 14005–14012 (2021).
Xie, J. et al. Highly selective oxidation of methane to methanol at ambient conditions by titanium dioxide-supported iron species. Nat. Catal. 1, 889–896 (2018).
Hooshmand, S. E., Heidari, B., Sedghi, R. & Varma, R. S. Recent advances in the Suzuki–Miyaura cross-coupling reaction using efficient catalysts in eco-friendly media. Green Chem. 21, 381–405 (2019).
Chen, Z. et al. A heterogeneous single-atom palladium catalyst surpassing homogeneous systems for Suzuki coupling. Nat. Nanotechnol. 13, 702–707 (2018).
Tao, X. et al. Anchoring positively charged Pd single atoms in ordered porous ceria to boost catalytic activity and stability in Suzuki coupling reactions. Small 16, e2001782 (2020).
Acknowledgements
This work was supported by the National Key Research and Development Program Nanotechnology Specific Project (No. 2020YFA0210900, H.J.), National Key R&D Program of China (2021YFA1501102, D.M.), the Science and Technology Key Project of Guangdong Province, China (2020B010188002, H.J.), Guangdong Natural Science Funds for Distinguished Young Scholar (2022B1515020035, X.H.), Guangdong Provincial Key R&D Program (2019B110206002, H.J.), the National Natural Science Foundation of China (22078371, X.H.; 21938001, H.J.; 21961160741, H.J.; 22108315, Q.H.), Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program (2017BT01C102, H.J.), the NSF of Guang-dong Province (2020A1515011141, X.H.), the Science and Technology Project of Guangzhou City, China (202102020461, X.H.).
Author information
Authors and Affiliations
Contributions
X.H. developed the concept, designed these experiments, and analyzed experimental data. X.H., H.Z., Y.C., and Y.Z. contributed to catalyst synthesis and catalytic experiments. H.Z., X.Z., and M.P. performed the EXAFS measurements and analyzed the data. X.H., H.Z., H.C., Q.H., X.Q., H.J., and D.M. wrote the paper. D.M. and H.J. directed the project. All authors discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Jagadeesh Rajenahally and the other, anonymous, reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
He, X., Zhang, H., Zhang, X. et al. Building up libraries and production line for single atom catalysts with precursor-atomization strategy. Nat Commun 13, 5721 (2022). https://doi.org/10.1038/s41467-022-33442-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-33442-2
- Springer Nature Limited