Abstract
This paper presents simulations of the growth of stationary and rising vapour bubbles in an extend pool of liquid using an Interface Capturing Computational Fluid Dynamics (CFD) methodology coupled with a method for simulating interfacial mass transfer at the vapour-liquid interface. The model enables mechanistic prediction of the local rate of phase change at the vapour-liquid interface and is applicable to realistic cases involving two-phase mixtures with large density ratios. The simulation methodology is based on the Volume of Fluid (VOF) representation of the flow, whereby an interfacial region in which mass transfer occurs is implicitly identified by a phase indicator, in this case the volume fraction of liquid, which varies from the value pertaining to the “bulk” liquid to the value of the bulk vapour. The novel methodology proposed here has been implemented using the Finite Volume framework and solution methods typical of “industrial” CFD practice embedded in the OpenFOAM CFD toolbox. Simulations are validated via comparison against experimental observations of spherical bubble growth in zero gravity and of the growth of a rising bubble in normal gravity. The validation cases represent a severe test for Interface Capturing methodologies due to large density ratios, the presence of strong interfacial evaporation and upward bubble rise motion. Agreement of simulation results with measurements available in the literature demonstrates that the methodology detailed herein is applicable to modelling bubble growth driven by phase-change in real fluids.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Badillo, A. 2012. Quantitative phase-field modeling for boiling phenomena. Physical Review E, 86: 041603.
Brackbill, J. U., Kothe, D. B., Zemach, C. 1992. A continuum method for modeling surface tension. Journal of Computational Physics, 100: 335–354.
Carey, V. P. 2020. Liquid-Vapor Phase-Change Phenomena: An Introduction to the Thermophysics of Vaporization and Condensation Processes in Heat Transfer Equipment, 3rd edn. Boca Raton: CRC Press.
Damiàn, S. M. 2013. An extended mixture model for the simultaneous treatment of short and long scale interfaces. Ph.D. Thesis. Facultad de Ingeniera y Ciencias Hdricas Instituto de Desarrollo Tecnologico para la Industria Qumica, Universidad Nacional del Litoral, Santa Fe, Argentina.
Ferziger, J. H., Perić, M., Street, R. L. 2002. Computational Methods for Fluid Dynamics. Springer Cham.
Florschuetz, L. W., Henry, C. L., Khan, A. R. 1969. Growth rates of free vapor bubbles in liquids at uniform superheats under normal and zero gravity conditions. International Journal of Heat and Mass Transfer, 12: 1465–1489.
Gibou, F., Chen, L., Nguyen, D., Banerjee, S. 2007. A level set based sharp interface method for the multiphase incompressible Navier-Stokes equations with phase change. Journal of Computational Physics, 222: 536–555.
Giustini, G. 2020. Modelling of boiling flows for nuclear thermal hydraulics applications—A brief review. Inventions, 5: 47.
Giustini, G., Issa, R. I. 2021. A method for simulating interfacial mass transfer on arbitrary meshes. Physics of Fluids, 33: 087102.
Greenshields, C. 2017. OpenFOAM User Guide. The OpenFOAM Foundation.
Hardt, S., Wondra, F. 2008. Evaporation model for interfacial flows based on a continuum-field representation of the source terms. Journal of Computational Physics, 227: 5871–5895.
Issa, R. I. 1986. Solution of the implicitly discretised fluid flow equations by operator-splitting. Journal of Computational Physics, 62: 40–65.
Karayiannis, T. G., Mahmoud, M. M. 2017. Flow boiling in microchannels: Fundamentals and applications. Applied Thermal Engineering, 115: 1372–1397.
Kunkelmann, C., Stephan, P. 2009. CFD simulation of boiling flows using the volume-of-fluid method within OpenFOAM. Numerical Heat Transfer, Part A: Applications, 56: 631–646.
Li, W. X., Li, Q., Yu, Y., Wen, Z. X. 2020. Enhancement of nucleate boiling by combining the effects of surface structure and mixed wettability: A lattice Boltzmann study. Applied Thermal Engineering, 180: 115849.
Olsson, E., Kreiss, G. 2005. A conservative level set method for two phase flow. Journal of Computational Physics, 210: 225–246.
Perot, B. 2000. Conservation properties of unstructured staggered mesh schemes. Journal of Computational Physics, 159: 58–89.
Popinet, S. 2018. Numerical models of surface tension. Annual Review of Fluid Mechanics, 50: 49–75.
Rajkotwala, A. H., Panda, A., Peters, E. A. J. F., Baltussen, M. W., van der Geld, C. W. M., Kuerten, J. G. M., Kuipers, J. A. M. 2019. A critical comparison of smooth and sharp interface methods for phase transition. International Journal of Multiphase Flow, 120: 103093.
Sahut, G., Ghigliotti, G., Balarac, G., Bernard, M., Moureau, V., Marty, P. 2021. Numerical simulation of boiling on unstructured grids. Journal of Computational Physics, 432: 110161.
Sato, Y., Ničeno, B. 2013. A sharp-interface phase change model for a mass-conservative interface tracking method. Journal of Computational Physics, 249: 127–161.
Schrage, R. W. 1953. A Theoretical Study of Interphase Mass Transfer. New York: Columbia University Press.
Scriven, L. E. 1959. On the dynamics of phase growth. Chemical Engineering Science, 10: 1–13.
Tryggvason, G., Scardovelli, R., Zaleski, S. 2011. Direct Numerical Simulations of Gas-Liquid Multiphase Flows. Cambridge: Cambridge University Press.
Welch, S. W. J., Wilson, J. 2000. A volume of fluid based method for fluid flows with phase change. Journal of Computational Physics, 160: 662–682.
Acknowledgements
This research was funded by the United Kingdom Engineering and Physical Sciences Research Council (EPSRC), Grant No. EP/ T027061/1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Declaration of competing interest
The authors have no competing interests to declare that are relevant to the content of this article.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Giustini, G., Issa, R.I. Modelling of free bubble growth with Interface Capturing Computational Fluid Dynamics. Exp. Comput. Multiph. Flow 5, 357–364 (2023). https://doi.org/10.1007/s42757-022-0139-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42757-022-0139-5