Skip to main content
Log in

Free Vibration of Functionally Graded Material Sandwich Plates with Soft Core

  • Original Paper
  • Published:
Journal of Vibration Engineering & Technologies Aims and scope Submit manuscript

Abstract

Purpose

Studying the vibration behavior of functionally graded material (FGM) sandwich structures is crucial for their applications in aerospace and other fields. However, there is little research on the vibration behavior of functionally graded material soft core sandwich plates under different boundary conditions. The purpose of this study is to investigate the free vibration of functionally graded material sandwich plates with soft core layers under different boundary conditions, and to explore the influence of different parameter changes on the natural frequency of functionally graded material soft core sandwich plates under different boundary conditions.

Methods

Based on the theory of refine shear deformation, a new free vibration model of FGM soft core sandwich plates under different boundary conditions with only four unknown variables is proposed. There are only four unknown variables for the motion equation and model. Derive the equation of motion through Hamilton’s principle. Based on the motion equation, analytical solutions for FGM soft core sandwich plates under various boundary conditions are obtained. The analytical solution of free vibration of Al/Al2O3 FGM soft core sandwich plates under simply supported boundary conditions was compared with the results in the literature to verify the accuracy of the model proposed in this paper. In addition, two different shape functions were used to analyze the free vibration of FGM soft core sandwich plates under different boundary conditions.

Results

The dimensionless natural frequencies of FGM soft core sandwich plates under different boundaries will increase with the increase of side-to-thickness ratio and volume fraction index, and decrease with the increase of aspect ratio. Moreover, the dimensionless natural frequencies of symmetric FGM soft core sandwich plates under different boundary conditions are higher than those of asymmetric FGM soft core sandwich plates under different boundary conditions.

Conclusion

The changes in different parameters have different effects on the free vibration of three sets of FGM soft core sandwich plates with different material groups under different boundary conditions. However, regardless of the parameter changes, the natural frequencies of these three different material groups of FGM soft core sandwich plates are the highest under FCFC boundary conditions and the lowest under SSSS boundary conditions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Tlidji Y, Daouadji TH, Hadji L, Tounsi A, Bedia EAA (2014) Elasticity solution for bending response of functionally graded sandwich plates under thermomechanical loading. J Therm Stress 37:852–869

    Article  Google Scholar 

  2. Zenkour AM (2013) Bending analysis of functionally graded sandwich plates using a simple four-unknown shear and normal deformations theory. J Sandw Struct Mater 15(6):629–659

    Article  Google Scholar 

  3. Zenkour AM (2005) A comprehensive analysis of functionally graded sandwich plates: part 1—deflection and stresses. Int J Solids Struct 42:5224–5242

    Article  Google Scholar 

  4. Sekkal M, Fahsi B, Tounsi A, Mahmoud SR (2017) A new quasi-3D HSDT for buckling and vibration of FG plate. Struct Eng Mech 64(6):737–749

    Google Scholar 

  5. Houari MSA, Benyoucef S, Mechab I, Tounsi A, Bedia EAA (2011) Two-variable refined plate theory for thermoelastic bending analysis of functionally graded sandwich plates. J Therm Stress 34:315–334

    Article  Google Scholar 

  6. Abdelaziz HH, Atmane HA, Mechab I, Boumia L, Tounsi A, El Abbas AB (2011) Static analysis of functionally graded sandwich plates using an efficient and simple refined theory. Chin J Aeronaut 24:434–448

    Article  Google Scholar 

  7. Hadji L, Avcar M (2021) Free vibration analysis of FG porous sandwich plates under various boundary conditions. J Appl Comput Mech 7(2):505–519

    Google Scholar 

  8. Burlayenko VN, Sadowski T, Altenbach H (2022) Efficient free vibration analysis of FGM sandwich flat panels with conventional shell elements. Mech Adv Mater Struct 29(25):3709–3726

    Article  Google Scholar 

  9. Liu J, Hao C, Ye W et al (2021) Free vibration and transient dynamic response of functionally graded sandwich plates with power-law nonhomogeneity by the scaled boundary finite element method. Comput Methods Appl Mech Eng 376:113665

    Article  MathSciNet  Google Scholar 

  10. Rebai B, Bouhadra A, Bousahla AA et al (2021) Thermoelastic response of functionally graded sandwich plates using a simple integral HSDT. Arch Appl Mech 91(7):3403–3420

    Article  Google Scholar 

  11. Vinh PV (2022) Analysis of bi-directional functionally graded sandwich plates via higher-order shear deformation theory and finite element method. J Sandw Struct Mater 24(2):860–899

    Article  Google Scholar 

  12. Sharma N, Swain PK, Maiti DK, Singh BN (2022) Vibration and uncertainty analysis of functionally graded sandwich plate using layerwise theory. AIAA J 60(6):3402–3423

    Article  Google Scholar 

  13. Shao D, Liang W, Wei Wu, Tao YQ (2022) A unified transient vibration analysis of FGM sandwich plates in thermal environment based on a further refined zigzag plate theory. Int J Struct Stab Dyn 22(09):2250095

    Article  MathSciNet  Google Scholar 

  14. Giang NT, Hong NT (2022) Hygro-thermo-mechanical stability analysis of variable thickness functionally graded sandwich porous plates resting on variable elastic foundations using finite element method. J Therm Stresses 45(8):641–668

    Article  Google Scholar 

  15. Singh D, Gupta A (2022) Influence of geometric imperfections on the free vibrational response of the functionally graded material sandwich plates with circular cut-outs. Mater Today Proc 62:1496–1499

    Article  Google Scholar 

  16. Pandey AM, Gopal KVN (2022) Transient vibration and sound radiation analysis of simply supported functionally graded sandwich plates. Compos Struct 290:115520

    Article  Google Scholar 

  17. Swaminathan K, Hirannaiah S, Rajanna T (2022) Vibration and stability characteristics of functionally graded sandwich plates with/without porosity subjected to localized edge loadings. Mech Based Des Struct Mach 51:6254–6234

    Article  Google Scholar 

  18. Cho JR (2022) Free vibration analysis of functionally graded sandwich plates with a homogeneous core. Appl Sci 12(12):6054

    Article  Google Scholar 

  19. Sah SK, Ghosh A (2022) Effect of porosity on the thermal buckling analysis of power and sigmoid law functionally graded material sandwich plates based on sinusoidal shear deformation theory. Int J Struct Stab Dyn 22(05):2250063

    Article  MathSciNet  Google Scholar 

  20. Singh SJ, Harsha SP (2019) Exact solution for free vibration and buckling of sandwich S-FGM plates on pasternak elastic foundation with various boundary conditions. Int J Struct Stab Dyn 19(03):1950028

    Article  MathSciNet  Google Scholar 

  21. Sobhy M (2013) Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions. Compos Struct 99:76–87

    Article  Google Scholar 

  22. Meziane MAA, Abdelaziz HH, Tounsi A (2014) An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions. J Sandw Struct Mater 16(3):293–318

    Article  Google Scholar 

  23. Chen Y, Li F, Hao Y (2020) Analysis of vibration and sound insulation characteristics of functionally graded sandwich plates. Compos Struct 249:112515

    Article  Google Scholar 

  24. Belkhodja Y, Ouinas D, Fekirini H et al (2020) Three new hybrid quasi-3D and 2D higher-order shear deformation theories for free vibration analysis of functionally graded material monolayer and sandwich plates with stretching effect. Adv Compos Lett 29:1–22

    Google Scholar 

  25. Singh SJ, Harsha SP (2020) Thermo-mechanical analysis of porous sandwich S-FGM plate for different boundary conditions using Galerkin Vlasov’s method: a semi-analytical approach. Thin-Walled Struct 150:106668

    Article  Google Scholar 

  26. Rahmani MC, Kaci A, Bousahla AA et al (2019) Influence of boundary conditions on the bending and free vibration behavior of FGM sandwich plates using a four-unknown refined integral plate theory. Comput Concr Int J 27(2):225–244

    Google Scholar 

  27. Ye R, Zhao N, Yang D et al (2021) Bending and free vibration analysis of sandwich plates with functionally graded soft core, using the new refined higher-order analysis model. J Sandw Struct Mater 23(2):680–710

    Article  Google Scholar 

  28. Yunfei LIU, Zhaoye QIN, Fulei CHU (2021) Nonlinear dynamic responses of sandwich functionally graded porous cylindrical shells embedded in elastic media under 1:1 internal resonance. Appl Math Mech 42(6):805–818

    Article  MathSciNet  Google Scholar 

  29. Kurpa LV, Shmatko TV (2020) Investigation of free vibrations and stability of functionally graded three-layer plates by using the R-functions theory and variational methods. J Math Sci 249:496–520

    Article  MathSciNet  Google Scholar 

  30. Kurpa LV, Shmatko TV (2021) Buckling and free vibration analysis of functionally graded sandwich plates and shallow shells by the Ritz method and the R-functions theory. Proc Inst Mech Eng C J Mech Eng Sci 235(20):4582–4593

    Article  Google Scholar 

  31. Natarajan S, Ganapathi M (2012) A comparison of various plate theories for functionally graded material sandwich plates. From materials to structures: advancement through innovation. CRC Press, Boca Raton, pp 127–131

    Google Scholar 

  32. Nguyen TK, Vo TP, Thai HT (2014) Vibration and buckling analysis of functionally graded sandwich plates with improved transverse shear stiffness based on the first-order shear deformation theory. Proc Inst Mech Eng C J Mech Eng Sci 228(12):2110–2131

    Article  Google Scholar 

  33. Merdaci S, Tounsi A, Houari MSA, Mechab I, Hebali H, Benyoucef S (2011) Two new refined shear displacement models for functionally graded sandwich plates. Arch Appl Mech 81:1507–1522

    Article  Google Scholar 

  34. Reissner E (1974) On transverse bending of plates, including the effect of transverse shear deformation. Int J Solids Struct 11(5):569–573

    Article  Google Scholar 

  35. Reddy JN (1984) A simple higher-order theory for laminated composite plates. J Appl Mech 51(4):745–752

    Article  Google Scholar 

  36. Natarajan S, Manickam G (2012) Bending and vibration of functionally graded material sandwich plates using an accurate theory. Finite Elem Anal Des 57:32–42

    Article  Google Scholar 

  37. Yu YY (1964) Generalized Hamilton’s principle and variational equation of motion in nonlinear elasticity theory, with application to plate theory. J Acoust Soc Am 36(1):111–120

    Article  MathSciNet  Google Scholar 

  38. Singh SJ, Harsha SP (2020) Nonlinear vibration analysis of sigmoid functionally graded sandwich plate with ceramic-FGM-metal layers. J Vib Eng Technol 8:67–84

    Article  Google Scholar 

  39. Pandey S, Pradyumna S (2015) An accurate prediction of natural frequencies of sandwich plates with functionally graded material core in thermal environment using a layerwise theory. Advances in structural engineering. Springer, New Delhi, pp 171–180

    Chapter  Google Scholar 

  40. Li Q, Iu VP, Kou KP (2008) Three-dimensional vibration analysis of functionally graded material sandwich plates. J Sound Vib 311(1–2):498–515

    Article  Google Scholar 

Download references

Funding

This research was funded by Natural Science Foundation of China (11862007, 52265020), Science and Technology Projects of Jiangxi Education Department of China(GJJ2201027).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhicheng Huang.

Ethics declarations

Conflict of interest

The authors declare no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Huang, Z., Han, M., Wang, X. et al. Free Vibration of Functionally Graded Material Sandwich Plates with Soft Core. J. Vib. Eng. Technol. 12, 5119–5131 (2024). https://doi.org/10.1007/s42417-023-01183-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42417-023-01183-1

Keywords

Navigation