Skip to main content
SpringerLink
Log in

Influence of shape memory alloy and rice husk ash on the mechanical behavior of concrete

  • Technical Paper
  • Published:
Innovative Infrastructure Solutions Aims and scope Submit manuscript

Abstract

The increase in population and high demand for construction have prompted engineers to propose innovative solutions to meet these needs. Concrete, as a highly consumed material that contributes to significant environmental pollution, can be modified using various additives to improve its mechanical properties and reduce its environmental impact. In this research, the shape memory alloy (SMA) fiber and rice husk ash (RHA) were applied as two reinforcement materials in the concrete structure. The compressive strength, splitting tensile strength, flexural strength, ultrasonic pulse velocity, and secondary compressive strength tests were examined. The results indicated that replacing 5% of RHA by the weight of Portland cement led to a 1.5% increase in compressive strength, a 2.5% increase in tensile strength, and a nearly 8.5% increase in flexural strength. SMA also contributed to the improvement of strength parameters, and using 0.3% of this fiber enhanced compressive strength by 2%, tensile strength by 5.5%, and flexural strength by 10% compared to control specimen. Additionally, this material had a noticeable impact on the results of the secondary compressive strength test. Furthermore, the simultaneous use of SMA and RHA in the concrete structure was evaluated as highly beneficial.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Li J et al (2023) Effect of modification and replacement rate of recycled coarse aggregate on properties of recycled aggregate concrete. Iran J Sci Technol Trans Civ Eng 47(6):3321–3332

    Google Scholar 

  2. Ourang S (2022) Evaluation of inter-organizational coordination of housing services in rural Alaska through social network analysis

  3. Ballesteros L et al (2023) Increasing safety in residential construction through a simplified earthquake-and typhoon-resistant guidelines. J Future Sustain 3(3):119–124

    Google Scholar 

  4. Asgari MH, Khodakarami MI, Vahdani R (2020) The effect of topographic irregularities on seismic response of the concrete rectangular liquid storage tanks incorporating soil–structure–liquid interaction. Iran J Sci Technol Trans Civ Eng 44(4):1179–1197

    Google Scholar 

  5. Samadi M, Jahan N (2019) Determining the effective level of outrigger in preventing collapse of tall buildings by IDA with an alternative damage measure. Eng Struct 191:104–116

    Google Scholar 

  6. Vahid R, Farnood Ahmadi F, Mohammadi N (2021) Earthquake damage modeling using cellular automata and fuzzy rule-based models. Arab J Geosci 14(13):1274

    Google Scholar 

  7. Samadi M, Jahan N (2021) Comparative study on the effect of outrigger on seismic response of tall buildings with braced and RC wall core. I: optimum level and examining modal response spectrum analysis reliability. Struct Des Tall Spec Build 30(8):e1848

    Google Scholar 

  8. Souri O, Mofid M (2023) Seismic evaluation of concentrically braced steel frames equipped with yielding elements and BRBs. Results Eng 17:100853

    Google Scholar 

  9. Kumar A, Singh GJ (2023) Recycled concrete aggregate classification based on quality parameters and performance. Iran J Sci Technol Trans Civ Eng 47(6):3211–3232

    Google Scholar 

  10. Sani JE, Yohanna P, Chukwujama IA (2020) Effect of rice husk ash admixed with treated sisal fibre on properties of lateritic soil as a road construction material. J King Saud Univ Eng Sci 32(1):11–18

    Google Scholar 

  11. Siddika A et al (2021) State-of-the-art-review on rice husk ash: a supplementary cementitious material in concrete. J King Saud Univ Eng Sci 33(5):294–307

    Google Scholar 

  12. Meddah MS et al (2020) Mechanical and microstructural characterization of rice husk ash and Al2O3 nanoparticles modified cement concrete. Constr Build Mater 255:119358

    CAS  Google Scholar 

  13. Al-Kutti W, Saiful Islam ABM, Nasir M (2019) Potential use of date palm ash in cement-based materials. J King Saud Univ Eng Sci 31(1):26–31

    Google Scholar 

  14. Sujivorakul C, Jaturapitakkul C, Taotip A (2011) Utilization of fly ash, rice husk ash, and palm oil fuel ash in glass fiber-reinforced concrete. J Mater Civ Eng 23(9):1281–1288

    CAS  Google Scholar 

  15. World Agricultural Production, United States Department of Agriculture (2020)

  16. Siddika A, Mamun MAA, Ali MH (2018) Study on concrete with rice husk ash. Innov Infrastruct Solut 3:1–9

    Google Scholar 

  17. Fapohunda C, Akinbile B, Shittu A (2017) Structure and properties of mortar and concrete with rice husk ash as partial replacement of ordinary Portland cement—a review. Int J Sustain Built Environ 6(2):675–692

    Google Scholar 

  18. Alaneme KK, Ekperusi JO, Oke SR (2018) Corrosion behaviour of thermal cycled aluminium hybrid composites reinforced with rice husk ash and silicon carbide. J King Saud Univ Eng Sci 30(4):391–397

    Google Scholar 

  19. Karthik S, Rao PRM, Awoyera P (2017) Strength properties of bamboo and steel reinforced concrete containing manufactured sand and mineral admixtures. J King Saud Univ Eng Sci 29(4):400–406

    Google Scholar 

  20. Haque M et al (2021) Prediction and optimization of the fresh and hardened properties of concrete containing rice husk ash and glass fiber using response surface methodology. Case Stud Constr Mater 14:e00505

    Google Scholar 

  21. Siddique R et al (2016) Properties of bacterial rice husk ash concrete. Constr Build Mater 121:112–119

    CAS  Google Scholar 

  22. Safiuddin M, West JS, Soudki KA (2012) Properties of freshly mixed self-consolidating concretes incorporating rice husk ash as a supplementary cementing material. Constr Build Mater 30:833–842

    Google Scholar 

  23. Zhang M-H, Malhotra VM (1996) High-performance concrete incorporating rice husk ash as a supplementary cementing material. ACI Mater J 93:629–636

    CAS  Google Scholar 

  24. Kishore R, Bhikshma V, Prakash PJ (2011) Study on strength characteristics of high strength rice husk ash concrete. Procedia Eng 14:2666–2672

    CAS  Google Scholar 

  25. Hesami S, Ahmadi S, Nematzadeh M (2014) Effects of rice husk ash and fiber on mechanical properties of pervious concrete pavement. Constr Build Mater 53:680–691

    Google Scholar 

  26. Alomayri T, Adesina A, Das S (2021) Influence of amorphous raw rice husk ash as precursor and curing condition on the performance of alkali activated concrete. Case Stud Constr Mater 15:e00777

    Google Scholar 

  27. Santhosh KG, Subhani SM, Bahurudeen A (2022) Recycling of palm oil fuel ash and rice husk ash in the cleaner production of concrete. J Clean Prod 354:131736

    CAS  Google Scholar 

  28. Huo Y et al (2023) Durability of alkali-activated slag concrete incorporating silica fume and rice husk ash. J Build Eng 78:107637

    Google Scholar 

  29. Tabrizikahou A et al (2022) Application and modelling of Shape-Memory Alloys for structural vibration control: state-of-the-art review. Constr Build Mater 342:127975

    CAS  Google Scholar 

  30. Raza S et al (2022) Shape memory alloy reinforcement for strengthening and self-centering of concrete structures—state of the art. Constr Build Mater 324:126628

    CAS  Google Scholar 

  31. Jani JM et al (2014) A review of shape memory alloy research, applications and opportunities. Mater Des (1980–2015) 56:1078–1113

    Google Scholar 

  32. Cladera A et al (2014) Iron-based shape memory alloys for civil engineering structures: an overview. Constr Build Mater 63:281–293

    Google Scholar 

  33. Thomas GE, Indira P, Sajith A (2023) Shape memory alloy fiber reinforced concrete/mortar—a review. Mater Today Proc. https://doi.org/10.1016/j.matpr.2023.03.655

  34. Du Z et al (2016) Static deformation modeling and analysis of flexure hinges made of a shape memory alloy. Smart Mater Struct 25(11):115029

    ADS  Google Scholar 

  35. Soul H, Yawny A (2017) Applicability of superelastic materials in seismic protection systems: a parametric study of performance in isolation of structures. Smart Mater Struct 26(8):085036

    ADS  Google Scholar 

  36. Song G, Ma N, Li H-N (2006) Applications of shape memory alloys in civil structures. Eng Struct 28(9):1266–1274

    Google Scholar 

  37. Indirli M, et al (2001) Application of shape memory alloy devices: the rehabilitation of the S. Giorgio Church bell tower. In: Smart structures and materials 2001: smart systems for bridges, structures, and highways. SPIE

  38. Otsuka K, Ren X (2005) Physical metallurgy of Ti–Ni-based shape memory alloys. Prog Mater Sci 50(5):511–678

    CAS  Google Scholar 

  39. Povoden-Karadeniz E et al (2013) Thermodynamics of Ti–Ni shape memory alloys. Calphad 41:128–139

    CAS  Google Scholar 

  40. Wang Y, Aslani F, Valizadeh A (2020) An investigation into the mechanical behaviour of fibre-reinforced geopolymer concrete incorporating NiTi shape memory alloy, steel and polypropylene fibres. Constr Build Mater 259:119765

    CAS  Google Scholar 

  41. Lee K-J et al (2018) Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects. Compos Struct 202:710–718

    Google Scholar 

  42. Choi E et al (2015) Repairing cracks developed in mortar beams reinforced by cold-drawn NiTi or NiTiNb SMA fibers. Smart Mater Struct 24(12):125010

    ADS  Google Scholar 

  43. Choi E et al (2017) Monotonic and hysteretic pullout behavior of superelastic SMA fibers with different anchorages. Compos B Eng 108:232–242

    CAS  Google Scholar 

  44. Choi E et al (2010) Recovery and residual stress of SMA wires and applications for concrete structures. Smart Mater Struct 19(9):094013

    ADS  Google Scholar 

  45. Aslani F, Liu Y, Wang Y (2019) The effect of NiTi shape memory alloy, polypropylene and steel fibres on the fresh and mechanical properties of self-compacting concrete. Constr Build Mater 215:644–659

    CAS  Google Scholar 

  46. Fernandes FAS et al (2023) Vitreous foam with thermal insulating property produced with the addition of waste glass powder and rice husk ash. Sustainability 15(1):796

    CAS  Google Scholar 

  47. Khassaf S, Jasim A, Mahdi F (2014) Investigation the properties of concrete containing rice husk ash to reduction the seepage in canals. Int J Sci Technol Res 3(4):348–354

    Google Scholar 

  48. Le HT, Nguyen ST, Ludwig H-M (2014) A study on high performance fine-grained concrete containing rice husk ash. Int J Concr Struct Mater 8(4):301–307

    CAS  Google Scholar 

  49. Wille K et al (2012) Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing. Mater Struct 45:309–324

    CAS  Google Scholar 

  50. Shatat M (2016) Hydration behavior and mechanical properties of blended cement containing various amounts of rice husk ash in presence of metakaolin. Arab J Chem 9:S1869–S1874

    MathSciNet  CAS  Google Scholar 

  51. Adenuga O, Soyingbe A, Ogunsanmi O (2010) The use of rice husk ash as partial replacement for cement in concrete

  52. Kartini K et al (2012) Effects of silica in rice husk ash (RHA) in producing high strength concrete. Int J Eng Technol 2(12):1951–1956

    Google Scholar 

  53. Yin C-Y, Mahmud HB, Shaaban MG (2006) Stabilization/solidification of lead-contaminated soil using cement and rice husk ash. J Hazard Mater 137(3):1758–1764

    CAS  PubMed  Google Scholar 

  54. Zareei SA et al (2017) Rice husk ash as a partial replacement of cement in high strength concrete containing micro silica: evaluating durability and mechanical properties. Case Stud Constr Mater 7:73–81

    Google Scholar 

  55. Habeeb GA, Fayyadh M (2009) Rice husk ash concrete: the effect of RHA average particle size on mechanical properties and drying shrinkage. Aust J Basic Appl Sci 3(3):1616–1622

    CAS  Google Scholar 

  56. Sahmaran M, Yaman IO (2007) Hybrid fiber reinforced self-compacting concrete with a high-volume coarse fly ash. Constr Build Mater 21(1):150–156

    Google Scholar 

  57. Sherif MM, Tanks J, Ozbulut OE (2017) Acoustic emission analysis of cyclically loaded superelastic shape memory alloy fiber reinforced mortar beams. Cem Concr Res 95:178–187

    CAS  Google Scholar 

  58. Li H, Liu Z-Q, Ou J-P (2006) Behavior of a simple concrete beam driven by shape memory alloy wires. Smart Mater Struct 15(4):1039

    ADS  Google Scholar 

  59. Chopra D, Siddique R (2015) Strength, permeability and microstructure of self-compacting concrete containing rice husk ash. Biosyst Eng 130:72–80

    Google Scholar 

  60. He J et al (2013) Synthesis and characterization of red mud and rice husk ash-based geopolymer composites. Cement Concr Compos 37:108–118

    CAS  Google Scholar 

  61. Vinothan K, Baskar G (2015) Study of structural behaviour on pozzolanic material (rice husk). Int J Civ Eng Technol 6(9):31–46

    Google Scholar 

  62. Foong KY et al (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. J Zhejiang Univ Sci A 16(1):59–69

    CAS  Google Scholar 

  63. Givi AN et al (2010) Contribution of rice husk ash to the properties of mortar and concrete: a review. J Am Sci 6(3):157–165

    Google Scholar 

  64. Bie R-S et al (2015) Studies on effects of burning conditions and rice husk ash (RHA) blending amount on the mechanical behavior of cement. Cement Concr Compos 55:162–168

    CAS  Google Scholar 

  65. Afroz M, Venkatesan S, Patnaikuni I (2019) Effects of hybrid fibers on the development of high volume fly ash cement composite. Constr Build Mater 215:984–997

    CAS  Google Scholar 

  66. Koushkbaghi M et al (2019) Acid resistance and durability properties of steel fiber-reinforced concrete incorporating rice husk ash and recycled aggregate. Constr Build Mater 202:266–275

    CAS  Google Scholar 

  67. Whitehurst EA (1951) Soniscope tests concrete structures. In: Journal proceedings

  68. Standard I (1992) Non-destructive testing of concrete, Part 1: ultrasonic pulse velocity. Bureau of Indian Standard, New Delhi

    Google Scholar 

  69. Beushausen H, Torrent R, Alexander MG (2019) Performance-based approaches for concrete durability: state of the art and future research needs. Cem Concr Res 119:11–20

    CAS  Google Scholar 

  70. Klein NS, Lenz LA, Mazer W (2020) Influence of the granular skeleton packing density on the static elastic modulus of conventional concretes. Constr Build Mater 242:118086

    CAS  Google Scholar 

  71. Zhang JP et al (2018) Flexural fracture toughness and first-crack strength tests of steel fiber-silica fume concrete and its engineering applications. Strength Mater 50(1):166–175

    CAS  Google Scholar 

  72. Xiao J et al (2012) Testing methods for determination of water-to-cement ratio of fresh concrete—a short review. J Chin Ceram Soc 40(11):1576–1585

    CAS  Google Scholar 

  73. Najmi L, Zebarjad SM, Janghorban K (2023) Effects of carbon nanotubes on the compressive and flexural strength and microscopic structure of epoxy honeycomb sandwich panels. Polym Sci Ser B 65:1–10

    Google Scholar 

  74. Farooq M, Banthia N (2022) Strain-hardening fiber reinforced polymer concrete with a low carbon footprint. Constr Build Mater 314:125705

    CAS  Google Scholar 

  75. Najmi L, Hu Z (2023) Effects of carbon nanotubes on thermal behavior of epoxy resin composites. J Compos Sci 7(8):313

    CAS  Google Scholar 

  76. Mohtasham Moein M et al (2023) Predictive models for concrete properties using machine learning and deep learning approaches: a review. J Build Eng 63:105444

    Google Scholar 

  77. Khodayari M, Razmi J, Babazadeh R (2019) An integrated fuzzy analytical network process for prioritisation of new technology-based firms in Iran. Int J Ind Syst Eng 32(4):424–442

    Google Scholar 

  78. Dehghani A, Soltani A (2023) Site selection of car parking with the GIS-based fuzzy multi-criteria decision making. Int J Inf Technol Decis Mak. https://doi.org/10.1142/S0219622023500293

    Article  Google Scholar 

  79. Do Q, Le T, Le C (2022) Automated construction activities extraction from accident reports using deep neural network and natural language processing techniques. In: The 9th international conference on construction engineering and project management. Las Vegas

Download references

Funding

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

Author information

Authors and Affiliations

  1. Department of Highway and Transportation Engineering, Faculty of Civil Engineering, Semnan University, Semnan, Iran

    Gholamali Shafabakhsh & Amir Hossein Tabatabaie Zavareh

Authors
  1. Gholamali Shafabakhsh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Amir Hossein Tabatabaie Zavareh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Amir Hossein Tabatabaie Zavareh.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Ethical approval

This article contains no studies with human participants or animals performed by any of the authors.

Informed consent

For this type of study, formal consent is not required.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Shafabakhsh, G., Tabatabaie Zavareh, A.H. Influence of shape memory alloy and rice husk ash on the mechanical behavior of concrete. Innov. Infrastruct. Solut. 9, 79 (2024). https://doi.org/10.1007/s41062-023-01347-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s41062-023-01347-8

Keywords

Search

Navigation