Abstract
A novel Al–20Si–2.5Fe–2Mn master alloy containing α-Al15(Fe, Mn)3Si2 particles was developed to modify Si phases of hypereutectic Al–20Si alloy. The microstructure of as-cast specimens was investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) equipped with energy-dispersive spectrometers (EDS), electron probe micro-analysis (EPMA), and X-ray diffraction (XRD). The morphology of primary Si phases changed from coarse irregular pentagonal and polygonal shapes to fine blocky shapes as the adding content of the master alloy increased up to 6.0%. The mean size of the primary Si phases decreased by 70.3% from 118 to 35 μm. Moreover, the shape of eutectic Si structure changed from coarse flakes or acicular shape to fine fibrous structure and granular particles. Furthermore, the Si phases were refined and homogenized when 6.0% master alloy was added into Al–20Si alloy. The optimum elongation (El) increased by 45.8% from 0.85 to 1.24%, and the optimum ultimate tensile strength (UTS) increased by 34.6% from 130 to 175 MPa comparing with unmodified Al–20Si alloy. In addition, the refinement and modification mechanisms of Si phases are also discussed on the hypereutectic Al–20Si alloys with the addition of master alloy.
Similar content being viewed by others
References
F.F. Wu, S.T. Li, G.A. Zhang, F. Jiang, Microstructural evolution and mechanical properties of hypereutectic Al–Si alloy processed by liquid die forging. Bull. Mater. Sci. 37, 1153–1157 (2014)
K. Tiwari, G. Gautam, N. Kumar, A. Mohan, S. Mohan, Effect of primary silicon refinement on mechanical and wear properties of a hypereutectic Al–Si alloy. Silicon 10, 2227–2239 (2018)
Q.L. Li, T.D. Xia, Y.F. Lan, P.F. Li, Effects of melt superheat treatment on microstructure and wear behaviours of hypereutectic Al–20Si alloy. Mater. Sci. Technol. 30, 835–841 (2014)
A. Hekmat-Ardakan, F. Ajersch, X. Grant Chen, Microstructure modification of Al–17% Si alloy by addition of Mg. J. Mater. Sci. 46, 2370–2378 (2011)
Q.L. Li, B.Q. Li, J.B. Li, Y.Q. Zhu, T.D. Xia, Effect of yttrium addition on the microstructures and mechanical properties of hypereutectic Al–20Si alloy. Mater. Sci. Eng. A 722, 47–57 (2018)
Q.L. Li, T.D. Xia, Y.F. Lan, W.J. Zhao, L. Fan, P.F. Li, Effect of in situ γ-Al2O3 particles on the microstructure of hypereutectic Al–20%Si alloy. J. Alloys Compd. 577, 232–236 (2013)
A. Hekmat-Ardakan, X.C. Liu, F. Ajersch, X. Grant Chen, Wear behaviour of hypereutectic Al–Si–Cu–Mg casting alloys with variable Mg contents. Wear 269, 684–692 (2010)
G. Liu, G.D. Li, A.H. Cai, Z.K. Chen, The influence of strontium addition on wear properties of Al-20 wt% Si alloys under dry reciprocating sliding condition. Mater. Des. 32, 121–126 (2011)
Q.L. Li, T.D. Xia, Y.F. Lan, P.F. Li, L. Fan, Effects of rare earth Er addition on microstructure and mechanical properties of hypereutectic Al–20% Si alloy. Mater. Sci. Eng. A 588, 97–102 (2013)
N. Kang, P. Coddet, H.L. Liao, T. Baur, C. Coddet, Wear behavior and microstructure of hypereutectic Al–Si alloys prepared by selective laser melting. Appl. Surf. Sci. 378, 142–149 (2016)
S.A. Bagaber, T. Abdullahi, Z. Harun, N. Daib, M.H.D. Othman, The effect of lanthanum addition on the microstructure and mechanical properties of A390 aluminum alloy. Arab. J. Sci. Eng. 42, 4559–4564 (2017)
R. Ahmad, M.B.A. Asmael, Influence of lanthanum on solidification, microstructure, and mechanical properties of eutectic Al–Si piston alloy. J. Mater. Eng. Perform. 25, 2799–2813 (2016)
S. Marola, D. Manfredi, G. Fiore, M.G. Poletti, M. Lombardi, P. Fino, L. Battezzati, A comparison of selective laser melting with bulk rapid solidification of AlSi10Mg alloy. J. Alloys Compd. 742, 271–279 (2018)
H.K. Jung, P.K. Seo, C.G. Kang, Microstructural characteristics and mechanical properties of hypo-eutectic and hyper-eutectic Al–Si alloys in the semi-solid forming process. J. Mater. Process. Technol. 113, 568–573 (2001)
R.V. Reyes, T.S. Bello, R. Kakitani, T.A. Costa, A. Garcia, N. Cheung, J.E. Spinelli, Tensile properties and related microstructural aspects of hypereutectic Al–Si alloys directionally solidified under different melt superheats and transient heat flow conditions. Mater. Sci. Eng. A 685, 235–243 (2017)
X.W. Zhu, R.C. Wang, C.Q. Peng, W.S. Liu, J. Peng, Microstructure and thermal expansion behavior of spray-formed Al–27Si alloy used for electronic packaging. J. Mater. Sci. Mater. Electron. 25, 4889–4895 (2014)
Y.P. Wang, S.J. Wang, H. Li, X.F. Liu, A new technique to modify hypereutectic Al–24%Si alloys by a Si–P master alloy. J. Alloys Compd. 477, 139–144 (2009)
H.C. Liao, G.X. Sun, Mutual poisoning effect between Sr and B in Al–Si casting alloys. Scripta Mater. 48, 1035–1039 (2003)
X.L. Zhou, X.Z. Zhu, T. Gao, Y.Y. Wu, X.F. Liu, Evolution of a novel Si–18Mn–16Ti–11P alloy in Al–Si melt and its influence on microstructure and properties of high-Si Al–Si alloy. Results Phys. 6, 737–745 (2016)
S.G. Shabestari, E. Parshizfard, Effect of semi-solid forming on the microstructure and mechanical properties of the iron containing Al–Si alloys. J. Alloys Compd. 509, 7973–7978 (2011)
C. Lin, S.S. Wu, S.L. Lü, P. An, L. Wan, Microstructure and mechanical properties of rheo-diecast hypereutectic Al–Si alloy with 2%Fe assisted with ultrasonic vibration process. J. Alloys Compd. 568, 42–48 (2013)
V.C. Srivastava, P. Ghosal, S.N. Ojha, Microstructure and phase formation in spray-deposited Al–18%Si–5%Fe–1.5%Cu alloy. Mater. Lett. 56, 797–801 (2002)
S. Terzi, J.A. Taylor, Y.H. Cho, L. Salvo, M. Suery, E. Boller, A.K. Dahle, In situ study of nucleation and growth of the irregular α-Al/β-Al5FeSi eutectic by 3-D synchrotron X-ray microtomography. Acta Mater. 58, 5370–5380 (2010)
Q.L. Li, Y.Q. Zhu, B.Q. Li, W.W. Ding, Y.F. Lan, T.D. Xia, Q.B. Du, Effect of iron addition on the microstructures and properties of hypereutectic Al–20%Si alloys. Mater. Res. Express (2018). https://doi.org/10.1088/2053-1591/aae227
Y. Zhang, H.L. Zheng, Y. Liu, R.F. Xu, L. Shi, X.L. Tian, Enhanced nucleation of primary silicon in Al–20Si (wt%) alloy inoculated with Al–10Si–2Fe master alloy. Mater. Lett. 123, 224–228 (2014)
G. Timelli, A. Fabrizi, S. Capuzzi, F. Bonollo, S. Ferraro, The role of Cr additions and Fe-rich compounds on microstructural features and impact toughness of AlSi9Cu3(Fe) diecasting alloys. Mater. Sci. Eng. A 603, 58–68 (2014)
S.G. Shabestari, M. Mahmudi, M. Emamy, J. Campbell, Effect of Mn and Sr on intermetallics in Fe-rich eutectic Al–Si alloy. Int. J. Cast Met. Res. 15, 17–24 (2002)
T. Gao, K.Q. Hu, L.S. Wang, B.R. Zhang, X.F. Liu, Morphological evolution and strengthening behavior of α-Al(Fe, Mn)Si in Al–6Si–2Fe–xMn alloys. Results Phys. 7, 1051–1054 (2017)
T. Gao, Y.Y. Wu, C. Li, X.F. Liu, Morphologies and growth mechanisms of α-Al(FeMn)Si in Al–Si–Fe–Mn alloy. Mater. Lett. 110, 191–194 (2013)
D.H. Lu, Y.H. Jiang, G.S. Guan, R.F. Zhou, Z.H. Li, R. Zhou, Refinement of primary Si in hypereutectic Al–Si alloy by electromagnetic stirring. J. Mater. Process. Technol. 189, 13–18 (2007)
R.Y. Wang, W.H. Lu, L.M. Hogan, Faceted growth of silicon crystals in Al–Si alloys. Metall. Mater. Trans. A 28, 1233–1243 (1997)
J. Wang, Z. Guo, J.L. Song, W.X. Hu, J.C. Li, S.M. Xiong, On the growth mechanism of the primary silicon particle in a hypereutectic Al–20 wt%Si alloy using synchrotron X-ray tomography. Mater. Des. 137, 176–183 (2018)
Z.N. Chen, H.J. Kang, G.H. Fan, J.H. Li, Y.P. Lu, J.C. Jie, Y.B. Zhang, T.J. Li, X.G. Jian, T.M. Wang, Grain refinement of hypoeutectic Al–Si alloys with B. Acta Mater. 12, 168–178 (2016)
Y.J. Sun, Q.L. Wang, H.R. Geng, Effects of complex modificating technique on microstructure and mechanical properties of hypereutectic Al–Si alloys. J. Mater. Sci. 47, 2104–2109 (2012)
G. Chirita, I. Stefanescu, D. Soares, F.S. Silva, Influence of vibration on the solidification behaviour and tensile properties of an Al–18 wt% Si alloy. Mater. Des. 30, 1575–1580 (2009)
D.Y. Maeng, J.H. Lee, C.W. Won, S.S. Cho, B.S. Chun, The effects of processing parameters on the microstructure and mechanical properties of modified B390 alloy in direct squeeze casting. J. Mater. Process. Technol. 105, 196–203 (2000)
K. Abedi, M. Emamy, The effect of Fe, Mn and Sr on the microstructure and tensile properties of A356–10%SiC composite. Mater. Sci. Eng. A 527, 3733–3740 (2010)
Acknowledgements
The authors would like to acknowledge the financial support of the National Natural Science Foundation of China (Grant No. 51561021).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, Q., Zhu, Y., Li, B. et al. Influences of Al–20Si–2.5Fe–2Mn Master Alloy Additions on the Microstructure and Mechanical Properties of Hypereutectic Al–20Si Alloys. Inter Metalcast 14, 409–422 (2020). https://doi.org/10.1007/s40962-019-00360-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40962-019-00360-x