Abstract
Transition metal phosphides (TMPs) are promising battery-type electrodes for hybrid supercapacitors (HSCs) due to their high electrical conductivity and electrochemical activity. Constructing TMPs with fast kinetics and stable structure is requisite to realize high-performance HSCs but remains a challenge. Herein, we incorporate Mo (or W) into NiCoP to form Ni-Co-Mo-P (or Ni-Co-W-P) heterostructures with a unique three-dimensional (3D) open morphology and modified electronic structure. Electrochemical analyses and density functional theory (DFT) calculations reveal that the incorporation of Mo/W enables NiCoP with optimized nanostructure, high conductivity, abundant reaction active sites and enhanced reaction kinetics. As a result, the designed Ni-Co-Mo-P heterostructure delivers a high areal capacity of 4.08 C cm−2 (703 C g−1) at 2 mA cm−2 and 3.25 C cm−2 at 30 mA cm−2 with a good cycling stability, superior to those of NiCoP and Ni-Co-W-P counterparts. The practical feasibility of the Ni-Co-Mo-P heterostructure is further demonstrated by an energy conversion and storage system consisting of commercial solar cell and Ni-Co-Mo-P//activated carbon (AC) device, which could obtain a high energy density of 53.3 W h kg−1 at a power density of 800 W kg−1. All-solid-state Ni-Co-Mo-P//AC device further illustrates the superior flexibility and makes a strong candidate for wearable energy storage electronics.
摘要
过渡金属磷化物具有高电导率和高电化学活性, 是一类新兴的 混合电容器电极材料. 然而制备具有快速反应动力学和稳定结构的过 渡金属磷化物仍然是一大挑战. 本文将Mo或W引入到NiCoP中, 得到 具有三维开放结构的纳米阵列和优化电子结构的异质结构. 相比于Ni-CoP纳米阵列, Ni-Co-Mo-P或Ni-Co-W-P纳米阵列具有更大的比表面 积和更多的空隙, 这种独特的结构不仅有助于电解液的渗透, 还可以缓 解氧化还原过程中的体积变化. 密度泛函理论计算结果显示引入高价 Mo或W元素形成异质结构提高了材料的本征电导率, 加快了反应动力 学. Ni-Co-Mo-P纳米阵列在2 mA cm−2 的电流密度下表现出 4.08 C cm−2 (703 C g−1) 的高面积比容量; 在30 mA cm−2下, 比容量还 能保持在3.25 C cm−2. 此外, Ni-Co-Mo-P纳米阵列与活性炭组装成的 水系混合超级电容器表现出800 W kg−1的高能量密度. 本研究为高性 能过渡金属磷化物基电极材料的设计拓宽了思路, 有助于促进其在混 合电容器中的应用.
Article PDF
Similar content being viewed by others
References
Liu J, Wang J, Xu C, et al. Advanced energy storage devices: Basic principles, analytical methods, and rational materials design. Adv Sci, 2018, 5: 1700322
Simon P, Gogotsi Y. Perspectives for electrochemical capacitors and related devices. Nat Mater, 2020, 19: 1151–1163
Jin L, Shen C, Shellikeri A, et al. Progress and perspectives on prelithiation technologies for lithium ion capacitors. Energy Environ Sci, 2020, 13: 2341–2362
Yuan Y, Wang C, Lei K, et al. Sodium-ion hybrid capacitor of high power and energy density. ACS Cent Sci, 2018, 4: 1261–1265
Jia X, Liu C, Neale ZG, et al. Active materials for aqueous zinc ion batteries: Synthesis, crystal structure, morphology, and electrochemistry. Chem Rev, 2020, 120: 7795–7866
Wang C, Liu L, Zhao S, et al. Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery. Nat Commun, 2021, 12: 2256
Tie D, Huang S, Wang J, et al. Hybrid energy storage devices: Advanced electrode materials and matching principles. Energy Storage Mater, 2019, 21: 22–40
Muzaffar A, Ahamed MB, Deshmukh K, et al. A review on recent advances in hybrid supercapacitors: Design, fabrication and applications. Renew Sustain Energy Rev, 2019, 101: 123–145
Liu JC, Huang ZH, Ma TY. Aqueous supercapacitor with ultrahigh voltage window beyond 2.0 volt. Small Struct, 2020, 1: 2000020
Shao Y, El-Kady MF, Sun J, et al. Design and mechanisms of asymmetric supercapacitors. Chem Rev, 2018, 118: 9233–9280
Chen Y, Kang C, Ma L, et al. MOF-derived Fe2O3 decorated with MnO2 nanosheet arrays as anode for high energy density hybrid super-capacitor. Chem Eng J, 2021, 417: 129243
Sekhar SC, Ramulu B, Narsimulu D, et al. Metal-organic framework-derived Co3V2O8@CuV2O6 hybrid architecture as a multifunctional binder-free electrode for Li-ion batteries and hybrid supercapacitors. Small, 2020, 16: 2003983
Zhu J, Huang B, Zhao C, et al. Benzoic acid-assisted substrate-free synthesis of ultrathin nanosheets assembled two-dimensional porous Co3O4 thin sheets with 3D hierarchical micro-/nano-structures and enhanced performance as battery-type materials for supercapacitors. Electrochim Acta, 2019, 313: 194–204
Huang B, Wang W, Pu T, et al. Rational design and facile synthesis of two-dimensional hierarchical porous M3V2O8 (M = Co, Ni and Co—Ni) thin sheets assembled by ultrathin nanosheets as positive electrode materials for high-performance hybrid supercapacitors. Chem Eng J, 2019, 375: 121969
Pazhamalai P, Krishnamoorthy K, Sahoo S, et al. Copper tungsten sulfide anchored on Ni-foam as a high-performance binder free negative electrode for asymmetric supercapacitor. Chem Eng J, 2019, 359: 409–418
Sahoo S, Krishnamoorthy K, Pazhamalai P, et al. Copper molybdenum sulfide anchored nickel foam: A high performance, binder-free, negative electrode for supercapacitors. Nanoscale, 2018, 10: 13883–13888
Li Y, Luo Z, Liang S, et al. Two-dimensional porous zinc cobalt sulfide nanosheet arrays with superior electrochemical performance for supercapatteries. J Mater Sci Tech, 2021, 89: 199–208
Liao F, Zhao X, Yang G, et al. Recent advances on two-dimensional NiFe-LDHs and their composites for electrochemical energy conversion and storage. J Alloys Compd, 2021, 872: 159649
Zhao Y, Zhao M, Ding X, et al. One-step colloid fabrication of nickel phosphides nanoplate/nickel foam hybrid electrode for high-performance asymmetric supercapacitors. Chem Eng J, 2019, 373: 1132–1143
Shi Y, Li M, Yu Y, et al. Recent advances in nanostructured transition metal phosphides: Synthesis and energy-related applications. Energy Environ Sci, 2020, 13: 4564–4582
Qu G, Sun P, Xiang G, et al. Moss-like nickel-cobalt phosphide nanostructures for highly flexible all-solid-state hybrid supercapacitors with excellent electrochemical performances. Appl Mater Today, 2020, 20: 100713
Li X, Elshahawy AM, Guan C, et al. Metal phosphides and phosphates-based electrodes for electrochemical supercapacitors. Small, 2017, 13: 1701530
Zhang Q, Liu Z, Zhao B, et al. Design and understanding of dendritic mixed-metal hydroxide nanosheets@N-doped carbon nanotube array electrode for high-performance asymmetric supercapacitors. Energy Storage Mater, 2019, 16: 632–645
Xie H, Lan C, Chen B, et al. Noble-metal-free catalyst with enhanced hydrogen evolution reaction activity based on granulated Co-doped Ni-Mo phosphide nanorod arrays. Nano Res, 2020, 13: 3321–3329
Lin Y, Sun K, Liu S, et al. Construction of CoP/NiCoP nanotadpoles heterojunction interface for wide pH hydrogen evolution electro-catalysis and supercapacitor. Adv Energy Mater, 2019, 9: 1901213
Gao X, Liu X, Wu D, et al. Significant role of Al in ternary layered double hydroxides for enhancing electrochemical performance of flexible asymmetric supercapacitor. Adv Funct Mater, 2019, 29: 1903879
Zhu G, Yang L, Wang W, et al. Hierarchical three-dimensional manganese doped cobalt phosphide nanowire decorated nanosheet cluster arrays for high-performance electrochemical pseudocapacitor electrodes. Chem Commun, 2018, 54: 9234–9237
Nguyen TT, Balamurugan J, Kim NH, et al. Hierarchical 3D Zn-Ni-P nanosheet arrays as an advanced electrode for high-performance all-solid-state asymmetric supercapacitors. J Mater Chem A, 2018, 6: 8669–8681
Mohammadi Zardkhoshoui A, Hosseiny Davarani SS. A rational design of nanoporous Cu-Co-Ni-P nanotube arrays and CoFe2Se4 nanosheet arrays for flexible solid-state asymmetric devices. Dalton Trans, 2020, 49: 10028–10041
Li J, Liu Z, Zhang Q, et al. Anion and cation substitution in transition-metal oxides nanosheets for high-performance hybrid supercapacitors. Nano Energy, 2019, 57: 22–33
Zong Q, Zhu Y, Wang Q, et al. Prussian blue analogues anchored P-(Ni,Co)Se2 nanoarrays for high performance all-solid-state super-capacitor. Chem Eng J, 2020, 392: 123664
Elshahawy AM, Guan C, Li X, et al. Sulfur-doped cobalt phosphide nanotube arrays for highly stable hybrid supercapacitor. Nano Energy, 2017, 39: 162–171
Zhai T, Wan L, Sun S, et al. Phosphate ion functionalized Co3O4 ultrathin nanosheets with greatly improved surface reactivity for high performance pseudocapacitors. Adv Mater, 2017, 29: 1604167
Wang F, Ma K, Tian W, et al. P-doped NiMoO4 parallel arrays anchored on cobalt carbonate hydroxide with oxygen vacancies and mass transfer channels for supercapacitors and oxygen evolution. J Mater Chem A, 2019, 7: 19589–19596
Kumar S, Saeed G, Kim NH, et al. Fabrication of Co-Ni-Zn ternary oxide@NiWO4 core-shell nanowire arrays and Fe2O3-CNTs@GF for ultra-high-performance asymmetric supercapacitor. Compos Part B-Eng, 2019, 176: 107223
Guo D, Li Z, Wang D, et al. Design and synthesis of zinc-activated CoxNi2−xP/graphene anode for high-performance zinc ion storage device. ChemSusChem, 2021, 14: 2205–2215
Niu R, Wang G, Ding Y, et al. Hexagonal prism arrays constructed using ultrathin porous nanoflakes of carbon doped mixed-valence Co-Mn-Fe phosphides for ultrahigh areal capacitance and remarkable cycling stability. J Mater Chem A, 2019, 7: 4431–4437
He S, Guo F, Yang Q, et al. Design and fabrication of hierarchical NiCoP-MOF heterostructure with enhanced pseudocapacitive properties. Small, 2021, 17: 2100353
Wang X, Chai L, Ding J, et al. Chemical and morphological transformation of MOF-derived bimetallic phosphide for efficient oxygen evolution. Nano Energy, 2019, 62: 745–753
Liu W, Yu L, Yin R, et al. Non-3d metal modulation of a 2D Ni-Co heterostructure array as multifunctional electrocatalyst for portable overall water splitting. Small, 2020, 16: 1906775
Huang H, Cho A, Kim S, et al. Structural design of amorphous CoMoPx with abundant active sites and synergistic catalysis effect for effective water splitting. Adv Funct Mater, 2020, 30: 2003889
Liu S, Yin Y, Ni D, et al. Phosphorous-containing oxygen-deficient cobalt molybdate as an advanced electrode material for supercapacitors. Energy Storage Mater, 2019, 19: 186–196
Hsu FH, Hsu SY, Pao CW, et al. Electrochemical properties and mechanism of CoMoO4@NiWO4 core-shell nanoplates for high-performance supercapacitor electrode application studied via in situ X-ray absorption spectroscopy. Nanoscale, 2020, 12: 13388–13397
Xu W, Sun C, Wang N, et al. Sn stabilized pyrovanadate structure rearrangement for zinc ion battery. Nano Energy, 2021, 81: 105584
Cao J, Zhang D, Yue Y, et al. Oxygen defect enriched (NH4)2V10O25. 8H2O nanosheets for superior aqueous zinc-ion batteries. Nano Energy, 2021, 84: 105876
Wang X, Li Y, Wang S, et al. 2D amorphous V2O5/graphene hetero-structures for high-safety aqueous Zn-ion batteries with unprecedented capacity and ultrahigh rate capability. Adv Energy Mater, 2020, 10: 2000081
Liu S, Zhu H, Zhang B, et al. Tuning the kinetics of zinc-ion insertion/extraction in V2O5 by in situ polyaniline intercalation enables improved aqueous zinc-ion storage performance. Adv Mater, 2020, 32: 2001113
Singh AK, Sarkar D, Karmakar K, et al. High-performance super-capacitor electrode based on cobalt oxide-manganese dioxide-nickel oxide ternary 1D hybrid nanotubes. ACS Appl Mater Interfaces, 2016, 8: 20786–20792
Gao L, Song J, Surjadi JU, et al. Graphene-bridged multifunctional flexible fiber supercapacitor with high energy density. ACS Appl Mater Interfaces, 2018, 10: 28597–28607
Naderi L, Shahrokhian S. Nickel vanadium sulfide grown on nickel copper phosphide dendrites/Cu fibers for fabrication of all-solid-state wire-type micro-supercapacitors. Chem Eng J, 2020, 392: 124880
Ren Y, Zhu T, Liu Y, et al. Direct utilization of photoinduced charge carriers to promote electrochemical energy storage. Small, 2021, 17: 2008047
Yang F, Liu X, Zhang H, et al. Boosting oxygen catalytic kinetics of carbon nanotubes by oxygen-induced electron density modulation for advanced Zn-air batteries. Energy Storage Mater, 2020, 30: 138–145
Geng H, Cheng M, Wang B, et al. Electronic structure regulation of layered vanadium oxide via interlayer doping strategy toward superior high-rate and low-temperature zinc-ion batteries. Adv Funct Mater, 2019, 30: 1907684
Yang X, Sun H, Zan P, et al. Growth of vertically aligned Co3S4/CoMo2S4 ultrathin nanosheets on reduced graphene oxide as a high-performance supercapacitor electrode. J Mater Chem A, 2016, 4: 18857–18867
Chen S, Yang G, Jia Y, et al. Three-dimensional NiCo2O4@NiWO4 core-shell nanowire arrays for high performance supercapacitors. J Mater Chem A, 2017, 5: 1028–1034
Huang B, Wang H, Liang S, et al. Two-dimensional porous cobalt-nickel tungstate thin sheets for high performance supercapattery. Energy Storage Mater, 2020, 32: 105–114
Yang Y, Zhou Y, Hu Z, et al. 3D thin-wall cell structure nickel-cobalt-molybdenum ternary phosphides on carbon cloth as high-performance electrodes for asymmetric supercapacitors. J Alloys Compd, 2019, 772: 683–692
Xing T, Ouyang Y, Chen Y, et al. P-doped ternary transition metal oxide as electrode material of asymmetric supercapacitor. J Energy Storage, 2020, 28: 101248
Lei X, Ge S, Yang TY, et al. Ni-Mo-S@Ni-P composite materials as binder-free electrodes for aqueous asymmetric supercapacitors with enhanced performance. J Power Sources, 2020, 477: 229022
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (51772267), and the Science and Technology Program of Guangxi Zhuang Autonomous Region (ZD20302001).
Author information
Authors and Affiliations
Contributions
Zong Q and Tao D designed and prepared the samples; Zhan J and Liu X performed the characterizations; Yang H and Wang J finished the first-principles calculation; Zong Q and Tao D performed data analysis and wrote the paper with support from Zhang Q and Cao G. All authors contributed to the general discussion.
Corresponding authors
Additional information
Conflict of interest
The authors declare that they have no conflict of interest.
Supplementary information
Supporting data are available in the online version of the paper.
Quan Zong received his PhD degree (2021) from the School of Materials Science and Engineering, Zhejiang University. He is currently working at the College of Materials and Chemistry, China Jiliang University. His current research interests include the synthesis and characterization of nanomaterials for electrochemical energy conversion and storage technologies.
Daiwen Tao received his MS degree from Northwest Normal University, China, in 2020. Afterwards, he joined Prof. Qilong Zhang’s group at Zhejiang University, China, for pursuing his PhD degree in materials science and engineering. His research interests focus on the electrochemical energy storage devices and their application in renewable energy storage and hybrid-electric vehicles.
Qi-Long Zhang received his PhD degree in materials science and engineering from Zhejiang University, China. He is currently a professor at Zhejiang University, China. His main research interests focus on novel organic-inorganic nanocomposites for energy-storage, energy harvesting and flexible sensors, electric ceramics/thin films and micro-devices for modern communication.
Guozhong Cao is a Boeing-Steiner Professor of materials science and engineering, Professor of chemical engineering and adjunct, Professor of mechanical engineering at the University of Washington. His current research focuses on chemical processing of nanomaterials for solar cells, batteries, and supercapacitors as well as actuators and sensors for aviation and biomedical applications.
Supplementary Materials
40843_2021_1904_MOESM1_ESM.pdf
Optimizing nanostructure and constructing heterostructure via Mo/W incorporation to improve electrochemical properties of NiCoP for hybrid supercapacitors
Rights and permissions
About this article
Cite this article
Zong, Q., Tao, D., Yang, H. et al. Optimizing nanostructure and constructing heterostructure via Mo/W incorporation to improve electrochemical properties of NiCoP for hybrid supercapacitors. Sci. China Mater. 65, 1195–1206 (2022). https://doi.org/10.1007/s40843-021-1904-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40843-021-1904-x