Skip to main content
SpringerLink
Log in

Swirl number in helically coiled tube flocculators: theoretical, experimental, and CFD modeling analysis

  • Original Paper
  • Published:
International Journal of Environmental Science and Technology Aims and scope Submit manuscript

Abstract

This paper presents original results of theoretical, experimental, and computational fluid dynamics (CFD) modeling studies of helically coiled tube flocculators, using a parameter capable of representing hydrodynamic characteristics in these reactors. The absence of parameters that satisfactorily depict the relationship between axial velocity and secondary flow in helically coiled tubes requires the creation of new parameters and/or the determination of the adequacy of existing parameters. The theoretical adequacy in the formulation of the swirl number (SN) that is applicable to helical units is proposed in this paper; we aim to represent their hydrodynamic characteristics, which are not possible with the current formulation. This parameter is obtained using three-dimensional CFD modeling in 48 units with various hydraulic and geometric characteristics. Acting as flocculators, these 48 units are evaluated by experimental modeling, assessing an important parameter of the flocculation process—turbidity removal efficiency (TRE). The results demonstrate, for the first time, the relationship between TRE and the SN, making possible an improvement in projects of helical units, optimizing hydraulic and geometric characteristics to achieve high operational performance units.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  • Chigier NA, Beer JM (1964) Velocity and static pressure distributions in swirling air jets issuing from annular and divergent nozzles. J Basic Eng Trans ASME 86:788–796

    Article  Google Scholar 

  • Fokeer S, Lowndes IS, Hargreaves DM (2010) Numerical modelling of swirl flow induced by a three-lobed helical pipe. Chem Eng Process Process Intensif 49:536–546

    Article  CAS  Google Scholar 

  • Germano M (1982) On the effect of torsion on a helical pipe flow. J Fluids Mech 125:1–8

    Article  Google Scholar 

  • Germano M (1989) The Dean equations extended to a helical pipe flow. J Fluids Mech 203:289–305

    Article  Google Scholar 

  • He W, Xue L, Gorczyca B, Nan J, Shi Z (2018a) Comparative analysis on flocculation performance in unbaffled square stirred tanks with different height-to-width ratios: experimental and CFD investigations. Chem Eng Res Des 132:518–535

    Article  CAS  Google Scholar 

  • He W, Xue L, Gorczyca B, Nan J, Shi Z (2018b) Experimental and CFD studies of floc growth dependence on baffle width in square stirred-tank reactors for flocculation. Sep Purif Technol 190:228–242

    Article  CAS  Google Scholar 

  • Huttl TJ, Friedrich R (2000) Influence of curvature and torsion on turbulent flow in helically coiled pipes. Int J Heat Fluid Flow 21:345–353

    Article  CAS  Google Scholar 

  • Huttl TJ, Friedrich R (2001) Direct numerical simulation of turbulent flows in curved and helically coiled pipes. Comput Fluids 30:591–605

    Article  Google Scholar 

  • Ibrahim RI (2017) Improving energy efficiency and fouling mitigation for membrane bioreactor in Al-Rustamiyah sewage treatment plant based on hydrodynamics. Int J Environ Sci Technol 1–12

  • Ishak MSA, Jaafar MNM (2004) The effect of swirl number on discharge coefficient for various orifice sizes in a burner system. J Mekanikal 17:99–108

    Google Scholar 

  • Kim YI, Kim SH, Hwang YD, Park JH (2011) Numerical investigation on the similarity of developing laminar flows in helical pipes. Nuclear Eng Des 241:5211–5224

    Article  CAS  Google Scholar 

  • Liu S, Masliyah JH (1993) Axially invariant laminar flow in helical pipes with finte pitch. J Fluid Mech 251:315–353

    Article  CAS  Google Scholar 

  • Mafra MR, Fassani FL, Zanoelo EF, Bizzo WA (2010) Influence of swirl number and fuel equivalence ratio on NO emission in an experimental LPG-fired chamber. Appl Therm Eng 30:928–934. https://doi.org/10.1016/j.applthermaleng.2010.01.004

    Article  CAS  Google Scholar 

  • Oliveira DS, Teixeira EC (2017a) Experimental evaluation of helically coiled tube flocculators for turbidity removal in drinking water treatment units. Water SA 43:378–386. https://doi.org/10.4314/wsa.v43i3.02

    Article  CAS  Google Scholar 

  • Oliveira DS, Teixeira EC (2017b) Hydrodynamic characterization and flocculation process in helically coiled tube flocculators: an evaluation through streamlines. Int J Environ Sci Technol. https://doi.org/10.1007/s13762-017-1341-z

    Article  Google Scholar 

  • Pawar SS, Sunnapwar VK, Mujawar BA (2011) A critical review of heat transfer through helical coils of circular cross section. J Sci Ind Res 70:835–843

    Google Scholar 

  • Renuka R, Mohan SM, Raj SA (2016) Hydrodynamic behaviour and its effects on the treatment performance of panelled anaerobic baffle-cum filter reactor. Int J Environ Sci Technol 13:307–318

    Article  CAS  Google Scholar 

  • Rocklage-Marliani G, Schmidts M, Ram VIV (2003) Three-dimensional laser-doppler velocimeter measurements in swirling turbulent pipe flow. Flow Turbul Combust 70:43–67

    Article  Google Scholar 

  • Sartori M, Oliveira DS, Teixeira EC, Rauen WB, Reis NC (2015) CFD modelling of helically coiled tubes for velocity gradient assessment. J Braz Soc Mech Sci Eng 37:187–198. https://doi.org/10.1007/s40430-014-0141-3

    Article  CAS  Google Scholar 

  • Sheen HJ, Chen WJ, Jeng SY, Huang TL (1996) Correlation of swirl number for a radial-type swirl generator. Exp Thermal Fluid Sci 12:444–451

    Article  CAS  Google Scholar 

  • Tiwari P, Antal SP, Podowski MZ (2006) Three-dimensional fluid mechanics of particulate to-phase flows in U-bend and helical conduits. Phys Fluids 18:1–18

    Google Scholar 

  • Tse IC, Swetland K, Weber-Shirk ML, Lion LW (2011) Method for quantitative analysis of flocculation performance. Water Res 45:3075–3084. https://doi.org/10.1016/j.watres.2011.03.021

    Article  CAS  Google Scholar 

  • Vaezi F, Sanders RS, Masliyah JH (2011a) Flocculation kinetics and aggregate structure of kaolinite mixtures in laminar tube flow. J Colloid Interface Sci 355:96–105

    Article  CAS  Google Scholar 

  • Vaezi GF, Sanders RS, Masliyah JH (2011b) Flocculation kinetics and aggregate structure of kaolinite mixtures in laminar tube flow. J Colloid Interface Sci 355:96–105. https://doi.org/10.1016/j.jcis.2010.11.068

    Article  CAS  Google Scholar 

  • Vashisth S, Kumar V, Nigam KDP (2008) A review on the potential applications of curved geometries in process industry. Ind Eng Chem Res 47:3291–3337

    Article  CAS  Google Scholar 

  • Wu J, He C (2010) Experimental and modeling investigation of sewage solids sedimentation based on particle size distribution and fractal dimension. Int J Environ Sci Technol 7:37–46

    Article  Google Scholar 

  • Yamamoto K, Akita T, Ikeuchi H, Kita Y (1995) Experimental study of the flow in a helical circular tube. Fluid Dyn Res 16:237–249

    Article  Google Scholar 

  • Yamamoto K, Yanase S, Alam M (1999) Axially invariant laminar flow in a helical duct of square cross-section. Indian J Pure Appl Math 30:271–285

    Google Scholar 

  • Yu B, Zheng B, Lin CX, Pena OJ, Ebadian MA (2003) Laser doppler anemometry measurements of laminar flow in helical pipes. Exp Thermal Fluid Sci 27:855–865

    Article  Google Scholar 

  • Zheng Wandong, Ye T, You S, Zhang H (2016) Experimental investigation of the heat transfer characteristics of a helical coil heat exchanger for a seawater-source heat pump. J Energy Eng 142:04015013

    Article  Google Scholar 

Download references

Acknowledgements

The authors would like to thank the institutional and financial support from Federal Institute of Espírito Santo (IFES), Federal University of Espírito Santo (UFES), Coordination for the Improvement of Higher Education Personnel (CAPES) and National Counsel of Technological and Scientific Development (CNPq).

Author information

Authors and Affiliations

  1. IFES – Federal Institute of Espírito Santo, Rodovia G. José Sette S/N Itacibá, Campus Cariacica, Cariacica, ES, 29150-410, Brazil

    D. S. Oliveira

  2. UFES – Federal University of Espírito Santo, Av. Fernando Ferrari, S/N Goiabeiras, Vitória, ES, 29075-910, Brazil

    E. C. Teixeira

Authors
  1. D. S. Oliveira
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. E. C. Teixeira
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to D. S. Oliveira.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Editorial responsibility U.W. Tang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Oliveira, D.S., Teixeira, E.C. Swirl number in helically coiled tube flocculators: theoretical, experimental, and CFD modeling analysis. Int. J. Environ. Sci. Technol. 16, 3735–3744 (2019). https://doi.org/10.1007/s13762-018-2027-x

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13762-018-2027-x

Keywords

Search

Navigation