Skip to main content

Advertisement

SpringerLink
Log in

Next-generation bitumen: a review on challenges and recent developments in bio-bitumen preparation and usage

  • Review Article
  • Published:
Biomass Conversion and Biorefinery Aims and scope Submit manuscript

Abstract

Bitumen is a dark brown to black colour glue material majorly used in the construction of bound layers of pavements. It is treated as a hazardous material because of its higher PAH (polycyclic aromatic hydrocarbons) content and presence of hydrogen sulphide. These characteristics of conventional bitumen affect humans as well as the environment, and conventional bitumen is a non-renewable resource that is getting depleted at a very rapid rate. This demands the need for an alternative binder that can mitigate ill effects created by conventional bitumen and address the future requirements of bitumen such as sustainability and circular economy for pavement construction. This review analysis focuses on biomass characterization in terms of an industrial, elemental, structural component and fraction content analysis. Along with these biomass sources and their upgrade techniques, conversion methods or preparation processes used to produce bio-oil and bio-bitumen from different biomass forms, practical application and life cycle inventory were reviewed, and their performance on physical, mechanical, rheological and chemical properties was studied. In addition to this, the effect of biochar as bitumen additive or filler on the performance characteristics of bitumen was studied. It is concluded that with the type and dosage of bio-oil used, the bio-binder production varies, and this bio-binder is only effective at moderate and low temperatures. Bio-oils do not evaporate or degrade with time; instead, they become a permanent part of the binder, preventing phase separation. Optimal usage of biochar improves the properties like viscosity, failure temperature, ageing resistance and deformation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1:

Similar content being viewed by others

References

  1. IARC Working Group on the Evaluation of Carcinogenic Risks to Humans. Bitumens and Bitumen Emissions, and Some N- and S-Heterocyclic Polycyclic Aromatic Hydrocarbons. Lyon (FR): World Health Organization; 2013. Available from: https://www.ncbi.nlm.nih.gov/books/NBK294234/

  2. Li R, Pei J, Sun C (2015) Effect of Nano-ZnO with modified surface on properties of bitumen. Constr Build Mater 98:656–661. https://doi.org/10.1016/j.conbuildmat.2015.08.141

    Article  Google Scholar 

  3. Little DN, Allen DH, Bhasin A (2018) Modeling and design of flexible pavements and materials. https://doi.org/10.1007/978-3-319-58443-0

    Book  Google Scholar 

  4. “Texas pavement preservation center two-year summary report.” Accessed March 21, 2021. http://ctr.utexas.edu/wp-content/uploads/pubs/TPPC_newsletters_9_2011.pdf.

  5. (2020) Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9. In: Lecture Notes in Civil Engineering. https://doi.org/10.1007/978-3-030-48679-2

  6. Partal P, Martínez-Boza FJ (2011) Modification of bitumen using polyurethanes. In: Polymer Modified Bitumen, pp 43–71. https://doi.org/10.1533/9780857093721.1.43

    Chapter  Google Scholar 

  7. Akkouri N, Baba K, Simou S, Elfarissi L, Nounah A (2020) Recycled thermoplastics modified bitumen improved with thermoplastic elastomer. E3S Web Conf 150:02015. https://doi.org/10.1051/e3sconf/202015002015

    Article  Google Scholar 

  8. Handle F, Füssl J, Neudl S, Grossegger D, Eberhardsteiner L, Hofko B, Hospodka M, Blab R, Grothe H (2014) The bitumen microstructure: a fluorescent approach. Mater Struct 49(1-2):167–180. https://doi.org/10.1617/s11527-014-0484-3

    Article  Google Scholar 

  9. “What is bitumen asphalt.” Bitumina. Accessed March 21, 2021. http://www.bitumina.co.uk/whatisbitumen.html.

  10. Mcnally T (2011) Polymer modified bitumen: properties and characterisation. Woodhead Publishing, Oxford

    Book  Google Scholar 

  11. Rasman M, Hassan NA, Hainin MR, Jaya RP, Haryati Y, Shukry NAM, Abdullah ME, Kamaruddin NHM (2018) Engineering properties of bitumen modified with bio-oil. MATEC Web Conf 250:02003. https://doi.org/10.1051/matecconf/201825002003

    Article  Google Scholar 

  12. Alamawi MY, Khairuddin FH, Yusoff NI, Badri K, Ceylan H (2019) Investigation on physical, thermal and chemical properties of palm kernel oil polyol bio-based binder as a replacement for bituminous binder. Constr Build Mater 204:122–131. https://doi.org/10.1016/j.conbuildmat.2019.01.144

    Article  Google Scholar 

  13. Rahman T, Aziz MA, Hainin R, Bakar WAWA (2014) Impact of bitumen binder: scope of bio-based binder for construction of flexible pavement. Jurnal Teknologi 70(7). https://doi.org/10.11113/jt.v70.3586

  14. Aziz MA, Rahman T, Hainin R, Bakar WAWA (2015) An overview on alternative binders for flexible pavement. Constr Build Mater 84:315–319. https://doi.org/10.1016/j.conbuildmat.2015.03.068

    Article  Google Scholar 

  15. “Mastering bitumen for better roads and innovative applications.” Coursera. Accessed March 21, 2021. https://www.coursera.org/learn/mastering-bitumen.

  16. “Walied Ali Elsaigh.” KSU Faculty. Accessed March 21, 2021. http://fac.ksu.edu.sa/welsaigh.

  17. Widyatmoko I (2016) Sustainability of bituminous materials. Sustain Constr Mater:343–370. https://doi.org/10.1016/b978-0-08-100370-1.00014-7

  18. “Browse by Type - Welcome to Universiti Teknologi Malaysia ...” Accessed March 21, 2021. http://eprints.utm.my/id/eprint/view/types/article/2010.html.

  19. “U.S. Energy Information Administration - EIA - independent statistics and analysis.” Today in Energy - U.S. Energy Information Administration (EIA). Accessed March 21, 2021. https://www.eia.gov/todayinenergy/detail.php?id=29372.

  20. Hajikarimi P, Onochie A, Fini EH (2020) Characterizing mechanical response of bio-modified bitumen at sub zero temperatures. Constr Build Mater 240:117940. https://doi.org/10.1016/j.conbuildmat.2019.117940

    Article  Google Scholar 

  21. Zahoor M, Nizamuddin S, Madapusi S, Giustozzi F (2021) Recycling asphalt using waste bio-oil: a review of the production processes, properties and future perspectives. Process Saf Environ Prot 147:1135–1159. https://doi.org/10.1016/j.psep.2021.01.032

    Article  Google Scholar 

  22. Ingrassia LP, Lu X, Ferrotti G, Canestrari F (2019) Chemical and rheological investigation on the short- and long-term aging properties of bio-binders for road pavements. Constr Build Mater 217:518–529. https://doi.org/10.1016/j.conbuildmat.2019.05.103

    Article  Google Scholar 

  23. Fini EH, Khodaii A, Hajikarimi P (2016) Fractional viscoelastic study of low-temperature characteristics of biomodified asphalt binders. J Mater Civ Eng 28(9):04016078. https://doi.org/10.1061/(asce)mt.1943-5533.0001525

    Article  Google Scholar 

  24. Gürer C, Elmacı A, Alagöz O, Yılmaz N (2020) Rheological behavior of bituminous binders replaced by poppy capsule pulp based bio-oil. Constr Build Mater 264:120631. https://doi.org/10.1016/j.conbuildmat.2020.120631

    Article  Google Scholar 

  25. Siefers A, Wang N, Sindt A, Dunn J, Mcelvogue J, Evans E, Ellis T (2010) A novel and cost-effective hydrogen sulfide removal technology using tire derived rubber particles. Proc Water Environ Fed 2010(12):4597–4622. https://doi.org/10.2175/193864710798182682

    Article  Google Scholar 

  26. Wang H, Wang L, Zhang J, Jing Y, Cao Y (2020) Effects of pyrolysis temperature and reaction time on the performance of swine-manure-derived bio-binder. Transp Res Part D: Transp Environ 89:102608. https://doi.org/10.1016/j.trd.2020.102608

    Article  Google Scholar 

  27. Ren Y, Cao H, Xu H, Xiong X, Krastev R, Luo L (2020) Improved aging properties of bio-bitumen coating sheets by using modified lignin. J Environ Manag 274:111178. https://doi.org/10.1016/j.jenvman.2020.111178

    Article  Google Scholar 

  28. “Welcome to UTHM Institutional Repository - UTHM ...” Accessed March 21, 2021. http://eprints.uthm.edu.my/cgi/users/home.

  29. Cao W, Yang W, Wang C (2019) Fatigue characterization of bio-modified asphalt binders under various laboratory aging conditions. Constr Build Mater 208:686–696. https://doi.org/10.1016/j.conbuildmat.2019.03.069

    Article  Google Scholar 

  30. “Home | Circular Berlin.” Accessed March 21, 2021. https://circular.berlin/.

  31. “ASCE Library: civil engineering and its practical applications.” ASCE Library | Civil Engineering and Its Practical Applications. Accessed March 21, 2021. https://ascelibrary.org/.

  32. “Digitale Fachbibliothek Wirtschaft Technik.” Springerprofessional.de. Accessed March 21, 2021. http://www.springerprofessional.de/.

  33. “BioRxiv.” BioRxiv. Accessed March 21, 2021. http://www.biorxiv.org/.

  34. Sun Z, Yi J, Feng D, Kasbergen C, Scarpas A, Zhu Y (2018) Preparation of bio-bitumen by bio-oil based on free radical polymerization and production process optimization. J Clean Prod 189:21–29. https://doi.org/10.1016/j.jclepro.2018.04.060

    Article  Google Scholar 

  35. Wang H, Ma Z, Chen X, Hasan MRM (2020) Preparation process of bio-oil and bio-asphalt, their performance, and the application of bio-asphalt: a comprehensive review. Journal of Traffic and Transport Eng 7(2):137–151. https://doi.org/10.1016/j.jtte.2020.03.002

    Article  Google Scholar 

  36. Global Reach Internet Productions, LLC - Ames. “Bioasphalt binder.” Bioasphalt Binder - Avello Bioenergy. Accessed May 23, 2021. http://www.avellobioenergy.com/en/products/bioasphalt_binder/.

  37. Zhu J, Birgisson B, Kringos N (2014) Polymer modification of bitumen: advances and challenges. Eur Polym J 54:18–38. https://doi.org/10.1016/j.eurpolymj.2014.02.005

    Article  Google Scholar 

  38. Ibrahim MR, Katman HY, Karim MR, Koting S, Mashaan NS (2013) A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen. Adv Mater Sci Eng 2013:1–8. https://doi.org/10.1155/2013/415246

    Article  Google Scholar 

  39. Kaur V, Sharma P (2020) Application of biochar as an adsorbent and its significance on berseem (Trifolium alexandrinum) growth parameters in farm soil contaminated with PAH. J Soil Sci Plant Nutr 20(3):806–819. https://doi.org/10.1007/s42729-019-00167-z

    Article  Google Scholar 

  40. Kumar A, Choudhary R, Narzari R, Kataki R, Shukla SK (2018) Evaluation of bio-asphalt binders modified with biochar: a pyrolysis by-product of Mesua ferrea seed cover waste. Cogent Eng 5(1):1548534. https://doi.org/10.1080/23311916.2018.1548534

    Article  Google Scholar 

  41. Saravanan P, Thillainayagam BP, Ravindiran G, Josephraj J (2020) Evaluation of the adsorption capacity of cocos Nucifera shell derived biochar for basic dyes sequestration from aqueous solution. In: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp 1–17. https://doi.org/10.1080/15567036.2020.1800142

    Chapter  Google Scholar 

  42. Jegan J, Praveen S, Bhagavathi Pushpa T, Gokulan R (2020) Sorption kinetics and isotherm studies of cationic dyes using groundnut (Arachis hypogaea) shell derived biochar a low-cost adsorbent. Appl Ecol Environ Res 18(1):1925–1939. https://doi.org/10.15666/aeer/1801_19251939

    Article  Google Scholar 

  43. Jegan J, Praveen S, Pushpa TB, Gokulan R (2020) Biodecolorization of Basic Violet 03 using biochar derived from agricultural wastes: isotherm and kinetics. J Biobased Mater Bioenergy 14(3):316–326. https://doi.org/10.1166/jbmb.2020.1969

    Article  Google Scholar 

  44. “Home - Transport Research International Documentation.” TRID. Accessed March 21, 2021. https://trid.trb.org/.

  45. Wang C, Xue L, Xie W, You Z, Xu Y (2018) Laboratory investigation on chemical and rheological properties of bio-asphalt binders incorporating waste cooking oil. Constr Build Mater 167:348–358. https://doi.org/10.1016/j.conbuildmat.2018.02.038

    Article  Google Scholar 

  46. Rahimi PM, Gentzis T The chemistry of bitumen and heavy oil processing. In: Practical Advances in Petroleum Processing, pp 597–634. https://doi.org/10.1007/978-0-387-25789-1_19

  47. Onojake MC, Osuji LC, Ndubuka CO (2017) Characterization of bitumen samples from four deposits in Southwest, Nigeria using trace metals. Egypt J Pet 26(2):547–552. https://doi.org/10.1016/j.ejpe.2016.08.002

    Article  Google Scholar 

  48. “Portal Rasmi Universiti Pertahanan Nasional Malaysia.” Accessed March 21, 2021. http://www.upnm.edu.my/.

  49. Ashoori S, Sharifi M, Masoumi M, Salehi MM (2017) The relationship between SARA fractions and crude oil stability. Egypt J Pet 26(1):209–213. https://doi.org/10.1016/j.ejpe.2016.04.002

    Article  Google Scholar 

  50. Sandeep RG, Ramesh A, Vijayapuri VR, Ramu P (2020) Laboratory evaluation of hard grade bitumen produced with PPA addition. Int J Pav Res Technol 14(4):505–512. https://doi.org/10.1007/s42947-020-0068-2

    Article  Google Scholar 

  51. Zhou T, Dong Z, Wang P, Yang C, Luan H (2020) Incorporating chemical acids to react with bio-oil: hydrophobicity improvement and effect on the moisture susceptibility of bio-binder. Constr Build Mater 255:119402. https://doi.org/10.1016/j.conbuildmat.2020.119402

    Article  Google Scholar 

  52. Paliukaitė M, Vaitkus A, Zofka A (2015) Influence of bitumen chemical composition and ageing on pavement performance. Baltic J Road Bridge Eng 10(1):97–104. https://doi.org/10.3846/bjrbe.2015.12

    Article  Google Scholar 

  53. Gong M, Zhu H, Pauli T, Yang J, Wei J, Yao Z (2017) Corrigendum to “Evaluation of bio-binder modified asphalt’s adhesion behavior using sessile drop device and atomic force microscopy” [Constr. Build. Mater. 145 (2017) 42–51]. Constr Build Mater 149:934–938. https://doi.org/10.1016/j.conbuildmat.2017.05.205

    Article  Google Scholar 

  54. Guarin A, Khan A, Butt AA, Birgisson B, Kringos N (2016) An extensive laboratory investigation of the use of bio-oil modified bitumen in road construction. Constr Build Mater 106:133–139. https://doi.org/10.1016/j.conbuildmat.2015.12.009

    Article  Google Scholar 

  55. Gonzalez-Quiroga A, Van Geem KM, Marin GB (2017) Towards first-principles based kinetic modeling of biomass fast pyrolysis. Biomass Conv Biorefin 7(3):305–317. https://doi.org/10.1007/s13399-017-0251-0

    Article  Google Scholar 

  56. Vesselli E, Peressi M (2017) Nanoscale control of metal clusters on templating supports. In: Studies in Surface Science and Catalysis Morphological, Compositional, and Shape Control of Materials for Catalysis, pp 285–315. https://doi.org/10.1016/b978-0-12-805090-3.00008-5

    Chapter  Google Scholar 

  57. “Universiti Teknologi MARA.” Universiti Teknologi MARA Official Website. Accessed March 22, 2021. https://www.uitm.edu.my/index.php/en.

  58. Liu Z, Li Y, Yu F, Zhu J, Lei X (2019) Co-pyrolysis of oil sand bitumen with lignocellulosic biomass under hydrothermal conditions. Chem Eng Sci 199:417–425. https://doi.org/10.1016/j.ces.2018.12.052

    Article  Google Scholar 

  59. Hernández-Mena L, Pecora A, Beraldo A (2014) Slow pyrolysis of bamboo biomass: analysis of biochar properties. Chem Eng Trans 37:115–120. https://doi.org/10.3303/CET1437020

    Article  Google Scholar 

  60. Yang Y, Brammer JG, Mahmood ASN, Hornung A (2014) Intermediate pyrolysis of biomass energy pellets for producing sustainable liquid, gaseous and solid fuels. Bioresour Technol 169(October 2014):794–799

    Article  Google Scholar 

  61. Ahmeda A, Abu Bakara MS, Azada AK, Sukrib RS, Phusuntic N (2018) Intermediate pyrolysis of Acacia Cincinnati and Acacia holosericea species for bio-oil and biochar production. Energy Convers Manag 176(15):393–340

    Article  Google Scholar 

  62. Veksha A, Zaman W, Layzell DB, Hill JM (2014) Enhancing biochar yield by co-pyrolysis of bio-oil with biomass: impacts of potassium hydroxide addition and air pre-treatment prior to co-pyrolysis. Bioresour Technol 171:88–94

    Article  Google Scholar 

  63. Brindhadevia K, Antob S, Renec ER, Sekard M, Mathimanib T, Chie NTL, Pugazhendhi A (2021) Effect of reaction temperature on the conversion of algal biomass to bio-oil and biochar through pyrolysis and hydrothermal liquefaction. Fuel 285(1):119106

    Article  Google Scholar 

  64. Lu J, Zhang Z, Zhang L, Fan G, Wu Y, Yang M (2021) Catalytic hydrothermal liquefaction of microalgae over different biochar. Catal Commun 149:106236

    Article  Google Scholar 

  65. Tharifkhan Shan Ahamed, Susaimanickam Anto, Thangavel Mathimani, Kathirvel Brindhadevi. “Arivalagan Pugazhendhi, Upgrading of bio-oil from thermochemical conversion of various biomass – Mechanism, challenges and opportunities.” Fuel, Volume 287, 2021, 119329.

    Article  Google Scholar 

  66. Heracleous E, Lappas A, Serrano D (2017) Special thematic issue in “biomass conversion and biorefinery” “advances in catalytic biomass fast pyrolysis and bio-oil upgrading”. Biomass Conv Biorefin 7(3):275–276. https://doi.org/10.1007/s13399-017-0284-4

    Article  Google Scholar 

  67. Pawar A, Panwar NL, Salvi BL (2020) Comprehensive review on pyrolytic oil production, upgrading and its utilization. J Mater Cycles Waste Manag 22(6):1712–1722. https://doi.org/10.1007/s10163-020-01063-w

    Article  Google Scholar 

  68. Sintamarean IM, Grigoras IF, Jensen CU, Toor SS, Pedersen TH, Rosendahl LA (2017) Two-stage alkaline hydrothermal liquefaction of wood to biocrude in a continuous bench-scale system. Biomass Conv Biorefin 7(4):425–435. https://doi.org/10.1007/s13399-017-0247-9

    Article  Google Scholar 

  69. Brilman DWF, Drabik N, Wądrzyk M (2017) Hydrothermal co-liquefaction of microalgae, wood, and sugar beet pulp. Biomass Conv Biorefin 7(4):445–454. https://doi.org/10.1007/s13399-017-0241-2

    Article  Google Scholar 

  70. Sun J, Yang J, Shi M (2017) Review of denitrogenation of algae biocrude produced by hydrothermal liquefaction. Trans Tianjin Univ 23(4):301–314. https://doi.org/10.1007/s12209-017-0051-4

    Article  Google Scholar 

  71. Zhang B, Chen H, Zhang H, Kuang D, Wu J, Zhang X (2019) A study on physical and rheological properties of rubberized bitumen modified by different methods. Materials 12(21):3538. https://doi.org/10.3390/ma12213538

    Article  Google Scholar 

  72. Bharti. “Civil Engineering.” Civil Engineering. March 12, 2021. Accessed March 22, 2021. http://www.youngcivilengineering.com/.

  73. Masson J-F, Collins P, Polomark G (2005) Steric hardening and the ordering of asphaltenes in bitumen. Energy Fuel 19(1):120–122. https://doi.org/10.1021/ef0498667

    Article  Google Scholar 

  74. Zhang X, Zhang K, Wu C, Liu K, Jiang K (2020) Preparation of bio-oil and its application in asphalt modification and rejuvenation: a review of the properties, practical application and life cycle assessment. Constr Build Mater 262:120528. https://doi.org/10.1016/j.conbuildmat.2020.120528

    Article  Google Scholar 

  75. Santos CR, Pais JC, Ribeiro J, Pereira P (2020) Evaluating the properties of bioasphalt produced with bio-oil derived from biodiesel production. In: Lecture Notes in Civil Engineering Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9, pp 397–407. https://doi.org/10.1007/978-3-030-48679-2_38

    Chapter  Google Scholar 

  76. Saravanan P, Josephraj J, Thillainayagam BP, Ravindiran G (2021) Evaluation of the adsorptive removal of cationic dyes by greening biochar derived from agricultural bio-waste of rice husk. Biomass Conv Biorefin. https://doi.org/10.1007/s13399-021-01415-y

  77. Caputo P, Ranieri GA, Godbert N, Aiello I, Tagarelli A, Rossi CO (2018) Investigation of new additives to reduce the fume emission of bitumen during asphalt concrete processing. Medit J Chem 7(4):259–266. https://doi.org/10.13171/mjc74181107-rossi

    Article  Google Scholar 

  78. Caputo P, Porto M, Angelico R, Loise V, Calandra P, Rossi CO (2020) Bitumen and asphalt concrete modified by nanometer-sized particles: basic concepts, the state of the art and future perspectives of the nanoscale approach. Adv Colloid Interf Sci 285:102283. https://doi.org/10.1016/j.cis.2020.102283

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. GMR Institute of Technology, Rajam, Srikakulam, A.P, India

    Ramu Penki

  2. Department of Civil Engineering, ITER, Siksha ‘O’ Anusandhan University, Bhubaneswar, India

    Ramu Penki & Subrat Kumar Rout

Authors
  1. Ramu Penki
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Subrat Kumar Rout
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ramu Penki.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Penki, R., Rout, S.K. Next-generation bitumen: a review on challenges and recent developments in bio-bitumen preparation and usage. Biomass Conv. Bioref. 13, 9583–9600 (2023). https://doi.org/10.1007/s13399-021-01803-4

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13399-021-01803-4

Keywords

Search

Navigation