Skip to main content
SpringerLink
Log in

Finite Element Analysis of Scanning Electron Microscope Illumination System

  • Research Article-Physics
  • Published:
Arabian Journal for Science and Engineering Aims and scope Submit manuscript

Abstract

The design, simulation, and beam dynamics analysis of the integrated illumination system of the scanning electron microscope (SEM) have been reported. The dimensions and capacity of the SEM components, such as the electron gun, electron column, and lenses, were determined using the finite element method. The optimization of the illumination system was performed, and characteristics beam parameters were studied analytically. The gun consisted of a simple diode structure having; cathode, Wehnelt, and anode electrodes. A tungsten cathode of diameter 150 μm was used to emit the electrons thermionically. The electrons beam was generated at 2700 K with acceleration potential of 15 kV. Pair of electromagnetic lenses producing field strengths, 221 mT and 253 mT, respectively, focused the beam at 56.5 mm from cathode, with beam diameter of 9 μm in the post anode region. The calculated value of beam brightness was 2.97 \(\times\) 106 A/(mm-rad)2. The final beam spot thus obtained was stable and perfectly symmetric along the two transverse directions. Gun assembly and lenses are thermally stable at the operational temperature. The illumination system geometry offers full-beam collimation control with reduced column length, making it suitable for electron diffraction studies, where focusing of the beam onto a sample is desired.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  1. Mytrochenko, V.; Zhyglo, V.; Kushnir V.: Design and Simulation of RF Modulated Thermionic Electron Gun. arXiv preprint arXiv:.13004 (2022)

  2. Goel, V.; Roy, A.; Maiti N.: 3-D particle trajectory tracking and characterization of electron beam parameters of high power electron gun. In: 2021 IEEE 2nd international conference on electrical power and energy systems (ICEPES). (2021). IEEE

  3. Ul Islam, G.; et al.: Simulation and test of a thermioic hairpin source DC electron beam gun. Optik 127(4), 1905–1908 (2016)

    Article  Google Scholar 

  4. Botifoll, M.; Pinto-Huguet, I.; Arbiol, J.: Machine learning in electron microscopy for advanced nanocharacterization: current developments, available tools and future outlook. Nanoscale Horizons (2022)

  5. Bi, L.; et al.: Recent progress in probing atomic and molecular quantum coherence with scanning tunneling microscopy. Progress in Surface Science, p. 100696 (2022)

  6. Ul-Hamid, A.: A beginners' guide to scanning electron microscopy. vol. 1. Springer (2018)

  7. Han, W.; Jiao, H.; Fox, D.: Scanning Electron Microscopy. In: Wang, R., et al. (Eds.) Progress in Nanoscale Characterization and Manipulation, pp. 35–68. Springer Singapore, Singapore (2018)

    Chapter  Google Scholar 

  8. Schönke, D.; et al.: Development of a scanning electron microscopy with polarization analysis system for magnetic imaging with ns time resolution and phase-sensitive detection. Rev. Sci. Instrum. 89(8), 083703 (2018)

    Article  Google Scholar 

  9. Park, M.-J.; et al.: Design and fabrication of a scanning electron microscope using a finite element analysis for electron optical system. J. Mech. Sci. Technol. 22, 1734–1746 (2008)

    Article  Google Scholar 

  10. Microscopy, S.E.: A Students Handbook. Ladd Research Industries. (1980), Inc

  11. Pawley, J.: The development of field-emission scanning electron microscopy for imaging biological surfaces. Scanning 19, 324–336 (1997)

    Google Scholar 

  12. Khursheed, A.: Recent developments in scanning electron microscope design. Adv. Imag. Electron Phys. 115, 197–285 (2001)

    Article  Google Scholar 

  13. Langmuir, D.B.: Theoretical limitations of cathode-ray tubes. Proc. Inst. Radio Eng. 25(8), 977–991 (1937)

    Google Scholar 

  14. Spachmann, H.; et al., Electron gun simulation with CST PARTICLE STUDIO. 558(1), 50-53 (2006)

  15. Ji, F.; et al.: Ultrafast relativistic electron nanoprobes. Commun. Phys. 2(1), 54 (2019)

    Article  Google Scholar 

  16. Çetinkaya, H.; Özbey, A.; Yüncü, A.: Thermionic electron gun design and prototyping. Avrupa Bilim ve Teknoloji Dergisi 23, 702–709 (2021)

    Google Scholar 

  17. Taran, A.; Okhrimovskyy, A.; Kovalev A.: Enhancement LaB6’s emission properties after the oxygen ion bombardment. In: 32nd international electric propulsion conference. Wiesbaden, Germany (2011)

  18. Nishitani, R.; et al.: Oxygen adsorption on the LaB6 (100), (110) and (111) surfaces. Surf. Sci. 115(1), 48–60 (1982)

    Article  Google Scholar 

  19. Weiland, T.: A discretization model for the solution of maxwell’s equations for six-component fields. Archiv Elektronik und Uebertragungstechnik 31, 116–120 (1977)

    Google Scholar 

  20. Bartsch, M.; et al.: Solution of Maxwell’s equations. Comput. Phys. Commun. 73(1–3), 22–39 (1992)

    Article  MathSciNet  Google Scholar 

  21. Park, K.; et al.: A study on design and analysis for magnetic lenses of a scanning electron microscope using finite element method. J. Korean Soc. Precis. Eng. 24(9), 95–102 (2007)

    Google Scholar 

  22. Zhou, W.; et al.: Fundamentals of Scanning Electron Microscopy (SEM). In: Scanning Microscopy for Nanotechnology Techniques and Applications, pp. 1–40. Springer (2007)

    Chapter  Google Scholar 

  23. Iqbal, M.; et al.: Design and beam dynamics of a transmission electron microscope electron gun assembly. Vacuum 165, 283–289 (2019)

    Article  Google Scholar 

  24. Iqbal, M.; et al.: Finite element analyses of a linear-accelerator electron gun. Rev. Sci. Instrum. 85(2), 023304 (2014)

    Article  Google Scholar 

  25. Iqbal, M.; Wasy, A.; Lodhi, M.J.R.O.S.I. Note: thermal analysis of the long line source electron gun. 84(5), 056113 (2013)

  26. Zhao, X.; Xu, Y.; Li, C.: Thermal strain analysis in optical planar waveguides. IEEE Photon. Technol. Lett. 15(3), 398–400 (2003)

    Article  Google Scholar 

Download references

Author information

Author notes

  1. Shazmina Jamal

    Present address: Department of Engineering and Applied Physics, University of Science and Technology of China, Hefei, China

Authors and Affiliations

  1. Institute of High Energy Physics, University of Chinese Academy of Sciences, Beijing, 100049, China

    Faizan Elahi & Munawar Iqbal

  2. Department of Physics, University of Lahore, Raiwind Road, Lahore, 55150, Pakistan

    Faizan Elahi

  3. Department of Physics, Division of Science and Technology, University of Education, Township Campus, Lahore, 54000, Pakistan

    Ghalib Ul Islam

  4. Centre for High Energy Physics, University of the Punjab, Lahore, 45590, Pakistan

    Shazmina Jamal & Munawar Iqbal

Authors
  1. Faizan Elahi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ghalib Ul Islam
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shazmina Jamal
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Munawar Iqbal
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Ghalib Ul Islam or Munawar Iqbal.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Elahi, F., Islam, G.U., Jamal, S. et al. Finite Element Analysis of Scanning Electron Microscope Illumination System. Arab J Sci Eng (2024). https://doi.org/10.1007/s13369-023-08529-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s13369-023-08529-7

Keywords

Search

Navigation