Skip to main content
Log in

Validation data for aircraft noise shielding prediction

  • Original Paper
  • Published:
CEAS Aeronautical Journal Aims and scope Submit manuscript

Abstract

The design of future low-noise aircraft will require an account of noise shielding as a fundamental design parameter. This aspect was already recognized in the 70s, where early experimental work set the ground on possible solutions to the conventional, short and reduced take-off and landing noise problem. The current low-noise aircraft design concepts of the hybrid-wing-body type require establishing a new knowledge base to allow an assessment of their potential noise benefit. Experimental work done in the course of the last 15 years slowly moved in this direction with the establishment of new testing methodologies. Currently available databases render an estimation of the turbomachinery noise shielding benefit of specific design choices on aircraft of the hybrid-wing-body type possible. Still, research in this domain would strongly benefit from the development of reliable and flexible numerical prediction methods. Recent experimental results obtained using a broadband non-intrusive laser-based sound source are presented. The methodology is used to conduct experiments on a wide range of configurations, providing an extensive high-quality validation database. The paper presents an overview of available datasets of dedicated experimental investigations, ranging from simple generic test cases to full 3D aircraft configurations, as well as comparisons with numerical results.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

Notes

  1. http://www.netlib.org.

References

  1. Thomas, R.H., Burley, C.L., Olson, E.D.: Hybrid wing body aircraft system noise assessment with propulsion airframe aeroacoustic experiments. Int. J. Aeroacoust. 11(3–4), 369–409 (2012)

    Article  Google Scholar 

  2. Guo, Y., Burley, C.L., Thomas, R.H.: On noise assessment for blended wing body aircraft. AIAA Pap. 2014, 365 (2014)

    Google Scholar 

  3. Reshotko, M., Olsen, W.A., Dorsch, R.G.: Preliminary noise tests of the engine-over-the-wing concept. 2: 10 deg–20 deg flap position (1972)

  4. Dorsch, R.G., Reshotko, M., Olsen, W.A.: Flap noise measurements for STOL configurations using external upper surface blowing (1972)

  5. Reshotko, M., Goodykoontz, J.H., Dorsch, R.G.: Engine-over-the-wing noise research (1973)

  6. Hellstrom, G.: Noise shielding aircraft configurations, a comparison between predicted and experimental results. Ninth Congress of the International Council of Aeronautical Sciences, pp. 74–58 (1974)

  7. Jeffery, R., Holbeche, T.: Experimental studies of noise-shielding effects for a delta-winged aircraft. AIAA Pap. 1975, 75 (1975)

    Google Scholar 

  8. Broadbent, E., Holbeche, T.A., Butler, G.F.: Interaction of a vortex core with acoustic radiation. Euromech 34 on Control and Feedback Mechanisms in Flow Noise, Göttingen (1972)

  9. Clark, L.R., Gerhold, C.H.: Inlet noise reduction by shielding for the blended wing body airplane. AIAA Paper, No. 99–1937, 10–12 (1999)

  10. Gerhold, C.H., Clark, L.R.: Database of inlet and exhaust noise shielding for wedge-shaped airframe. Tech. Rep. (2001)

  11. Gerhold, C.H., Clark, L.R., Dunn, M.H., Tweed, J.: Investigation of acoustical shielding by a wedge-shaped airframe. J. Sound Vib. 294(1), 49–63 (2006)

    Article  Google Scholar 

  12. Ricouard, J., Davy, R., Loheac, P., Moore, A., Piccin, O.: Rosas wind tunnel test campaign dedicated to unconventional aircraft concepts study. 10th AIAA/CEAS Aeroacoustics Conference Manchester, UK (2004)

  13. Papamoschou, D., Mayoral, S.: Experiments on shielding of jet noise by airframe surfaces. 15th AIAA/CEAS Aeroacoustics Conference, AIAA-2009-3326, Miami, Florida, USA (2009)

  14. Czech, M.J., Thomas, R.H., Elkoby, R.: Propulsion airframe aeroacoustic integration effects for a hybrid wing body aircraft configuration. Int. J. Aeroacoust. 11(3–4), 335–367 (2012)

    Article  Google Scholar 

  15. Hutcheson, F.V., Brooks, T.F., Burley, C.L., Bahr, C.J., Stead, D.J., Pope, D.S.: Shielding of turbomachinery broadband noise from a hybrid wing body aircraft configuration. 22nd AIAA/CEAS Aeroacoustics Conference, AIAA 2016-2708, Lyon, France (2016)

  16. Rossignol, K.-S., Lummer, M., Delfs, J.: Validation of DLR’s sound shielding prediction tool using a novel sound source. 11th AIAA/CEAS Aeroacoustics Conference, AIAA 2009-3329, Miami, USA (2009)

  17. Rossignol, K.-S., Delfs, J.: Analysis of the noise shielding characteristics of a NACA0012 2D wing. 22nd AIAA/CEAS Aeroacoustics Conference, AIAA 2016–2795, Lyon, France (2016)

  18. Yin, J., Rossignol, K.-S., Bulté, J.: Acoustic scattering experiments on spheres for studying helicopter noise scattering. Proceedings of the 42nd European Rotorcraft Forum, Lille, France (2016)

  19. Rossignol, K.-S., Pott-Pollenske, M., Delfs, J., Silbermann, J., Pereira Gomes, J.M.: Investigating noise shielding by unconventional aircraft configurations. 23rd AIAA/CEAS Aeroacoustics Conference, AIAA 2017-3195, Denver, USA (2017)

  20. Rossignol, K.-S., Delfs, J., Boden, F.: On the relevance of convection effects for a laser-generated sound source. 21st AIAA/CEAS Aeroacoustics Conference, AIAA 2015-3146. Dallas, USA (2015)

  21. Hosoya, N., Nagata, M., Kajiwara, I.: Acoustic testing in a very small space based on a point sound source generated by laser-induced breakdown: stabilization of plasma formation. J. Sound Vib. 332(19), 4572–4583 (2013)

    Article  Google Scholar 

  22. Radziemski, L., Cremers, D.: Laser Induced Plasmas and Applications. Marcel Dekker Inc., New-York (1989)

    Google Scholar 

  23. Phuoc, T.X., White, C.M.: Experimental studies of the absorption and emissions from laser-induced spark in combustible gases. Opt. Commun. 181(4), 353–359 (2000)

    Article  Google Scholar 

  24. Chen, Y.-L., Lewis, J., Parigger, C.: Spatial and temporal profiles of pulsed laser-induced air plasma emissions. J. Quant. Spectrosc. Radiat. Transf. 67(2), 91–103 (2000)

    Article  Google Scholar 

  25. Ostrovskaya, G., Zaĭdel’, A.: Laser spark in gases. Phys. Uspekhi 16(6), 834–855 (1974)

    Article  Google Scholar 

  26. Villagrán-Muniz, M., Sobral, H., Navarro-González, R.: Shock and thermal wave study of laser-induced plasmas in air by the probe beam deflection technique. Meas. Sci. Technol. 14(5), 614 (2003)

    Article  Google Scholar 

  27. Boden, F., Delfs, J.: Development of a laser-based sound source. Inter-Noise, Honolulu, Hawaii, USA (2006)

  28. Phuoc, T.X.: Laser spark ignition: experimental determination of laser-induced breakdown thresholds of combustion gases. Opt. Commun. 175(4), 419–423 (2000)

    Article  Google Scholar 

  29. Saleh, B., Teich, M.: Fundamental of Photonics, vol. 3, pp. 80–107. Wiley, New York (1991)

    Book  Google Scholar 

  30. Delfs, J.W., Ewert, R., Bauer, M., Dierke, J.: Numerical simulation of aerodynamic noise with PIANO. Institute of Aerodynamics and Flow Technology, Department of Technical Acoustics, DLR, Lilienthalplatz 7, 38108 Braunschweig, Germany, 9 (2015)

  31. Schwamborn, D., Gerhold, T., Heinrich, R.: The DLR TAU-code: recent applications in research and industry. European Conference on Computational Fluid Dynamics, TU Delft (2006)

  32. Delfs, J., Ewert, R.: Numerical simulation of aerodynamic noise with PIANO. Tech. Rep, DLR, Braunschweig (2015)

  33. Burton, A.J., Miller, G.F.: The application of integral equation methods to the numerical solution of some exterior boundary value problems. Proc. R. Soc. Lond. A 323, 201–210 (1971)

    Article  MathSciNet  MATH  Google Scholar 

  34. Kirkup, S.M.: BEMHELM: BEM for Helmholtz Problems. http://www.boundary-element-method.com/helmholtz/manual/index.htm (1998)

  35. Schöberl, J.: NETGEN—automatic mesh generator. Johannes Kepler University Linz, Austria. http://www.hpfem.jku.at/netgen

  36. Lummer, M.: Installation effects—numerical investigation. In: Aircraft Noise Generation and Assessment. CEAS Aeronaut. J. (submitted)

  37. Geuzaine, Christophe, Remacle, Jean-François: Gmsh: A 3-d finite element mesh generator with built-in pre-and post-processing facilities. Int. J. Numer. Methods Eng. 79(11), 1309–1331 (2009)

    Article  MathSciNet  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Karl-Stéphane Rossignol.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

This paper is part of a Special Issue on Aircraft Noise Generation and Assessment.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Rossignol, KS., Delfs, J.W., Mößner, M. et al. Validation data for aircraft noise shielding prediction. CEAS Aeronaut J 10, 179–196 (2019). https://doi.org/10.1007/s13272-019-00387-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13272-019-00387-0

Keywords

Navigation