Abstract
Renewable plant materials are of interest for the development of new biodegradable materials. The study describes the preparation process of nanocellulose from organosolv reed pulp (ORP). ORP was obtained from reed stalks in two stages: by extraction of the raw material with NaOH solution and cooking using a mixture of acetic acid and hydrogen peroxide. Nanocellulose was extracted from ORP using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) in a TEMPO/NaBr/NaClO system followed by ultrasonic treatment to obtain a stable nanocellulose gel. It was found that an increase in the TEMPO consumption and oxidation time increases the density and tensile strength, the content of carboxyl groups, and the transparency of the nanocellulose films, but decreases the yield and crystallinity of the nanocellulose. Structural and chemical changes and the crystallinity index of reed stalks, ORP, and nanocellulose were studied using SEM, FTIR, and XRD methods. Nanocellulose films had a density of up to 1.51 g/cm3, a transparency of up to 82.4%, a carboxyl group content of up to 1.18 mmol/g, and a tensile strength of up to 69.7 MPa. The crystallinity index of nanocellulose decreases from 78.8 to 64.9% with an increase in the oxidation time. TEM and AFM methods have shown that the width of nanocellulose particles is from 3 to 20 nm. TGA confirmed a decrease in the crystallinity index of nanocellulose as a result of its prolonged oxidation. The properties of the obtained nanocellulose from ORP demonstrate the great potential of its application for the preparation of new nanocomposite materials.
Similar content being viewed by others
References
Abdul-Khalil HP, Davoudpour Y, Nazuruyl Islam M, Asniza M, Sudesh K et al (2014) Production and modification of nanofibrillated cellulose using various mechanical processes: a review. Carbohydr Polym 99:649–665
Abitbol T, Rivkin A, Cao Y, Nevo Y, Abraham E, Ben-Shalom T, Lapidot S, Shoseyov O (2016) Nanocellulose, a tiny fiber with huge applications. Curr Opin Biotechnol 39:76–88. https://doi.org/10.1016/j.copbio.2016.01.002
Alavi M (2019) Modifications of microcrystalline cellulose (MCC), nanofibrillated cellulose (NFC), and nanocrystalline cellulose (NCC) for antimicrobial and wound healing applications. E-Polymers 19:103–119
Amezcua-Allieri MA, Durán TS, Aburto J (2017) Study of chemical and enzymatic hydrolysis of cellulosic material to obtain fermentable sugars. J Chem. https://doi.org/10.1155/2017/5680105
Asad M, Saba N, Asiri AM, Jawaid M, Indarti E, Wanrosli WD (2018) Preparation and characterization of nanocomposite films from oil palm pulp nanocellulose/poly (Vinyl alcohol) by casting method. Carbohyd Polym 191:103–111. https://doi.org/10.1016/j.carbpol.2018.03.015
Asaeda T, Rajapakse L, Manatunge J, Sahara N (2006) The effect of summer harvesting of phragmites australis on growth characteristics and rhizome resource storage. Hydrobiologia 553:327–335. https://doi.org/10.1007/s10750-005-6
Baghban MH, Mahjoub R (2020) Natural Kenaf fiber and LC3 binder for sustainable fiber-reinforced cementitious composite: a review. Appl Sci 357:1–15. https://doi.org/10.3390/app10010357
Banerjee M, Saraswatula S, Williams A, Brettmann B (2020) Effect of purification methods on commerciallyavailable cellulose nanocrystal properties andTEMPO oxidation. Processes 8:698. https://doi.org/10.3390/pr8060698
Barbash V, Yaschenko O (2020) Preparation, properties and use of nanocellulose from non-wood plant materials. In: Krishnamoorthy K (ed) Novel nanomaterials. IntechOpen, London
Barbash VA, Yaschenko OV, Alushkin SV, Kondratyuk AS, Posudievsky OY, Koshechko VG (2016) The effect of mechanochemicaltreatment of cellulose on characteristics of nanocellulosefilms. Nanoscale Res Lett 11:410. https://doi.org/10.1186/s11671-016-1632-1
Barbash VA, Yaschenko OV, Shniruk OM (2017a) Preparation andproperties of nanocellulose from organosolv straw pulp. Nanoscale Res Lett 12:241. https://doi.org/10.1186/s11671-017-2001-4
Barbash V, Yashchenko O, Kedrovska A (2017b) Preparation and propertiesof nanocellulose from peracetic flax pulp. JSRR 16(1):1–10. https://doi.org/10.9734/JSRR/2017/36571
Barbash VA, Yashchenko OV, Opolsky VO (2018) Effect of hydrolysis conditions of organosolv pulp from kenaf fibers on the physicochemical properties of the obtained nanocellulose. Theor Exp Chem 54:193–198. https://doi.org/10.1007/s11237-018-9561-y
Barbash VA, Yashchenko OV, Vasylieva OA (2019) Preparation and properties of nanocellulose from miscanthus × giganteus. J Nanomater. https://doi.org/10.1155/2019/3241968
Besbes I, Alilsa S, Boufi S (2011) Nanofibrillated cellulose from TEMPO-oxidizede ucalyptus fibres:effect of the carboxyl content. Carbohydr Polym 84(3):975–983
Biana H, Gaoa Y, Yanga Y, Fang G, Daia H (2018) Improving cellulose nanofibrillation of waste wheat straw using the combined methods of prewashing, p-toluenesulfonic acid hydrolysis, disk grinding, and endoglucanase post-treatment. Biores Technol 256:321–327. https://doi.org/10.1016/j.biortech.2018.02.038
Charani PR, Moradian MH (2019) Utilization of cellulose nanofibers and cationic polymers to improve breaking length of paper. Cellul Chem Technol 53(7–8):767–774
Chen Y, Fan D, Han Y, Lyu S, Lu Y, Li G, Jiang F, Wang S (2018) Effect of high residual lignin on the properties f cellulose nanofibrils/films. Cellulose 25:6421–6431. https://doi.org/10.1007/s10570-018-2006-x
Choi JH, Park SY, Kim JH, Cho SM, Jang SK, Hong C, Choi IG (2019) Selective deconstruction of hemicellulose and lignin with producing derivatives by sequential pretreatment process for biorefining concept. Bioresour Technol 291:121913. https://doi.org/10.1016/j.biortech.2019.121913
Coseri S (2009) Phthalimide-N-oxyl (PINO) radical, a powerful catalytic agent: its generation and versatility towards various organic substrates. Catal Rev 51(2):218–292. https://doi.org/10.1080/01614940902743841
Dassanayake RS, Acharya S, Abidi N (2018) Biopolymer-based materials from polysaccharides: properties processing, characterization and sorption applications. In: Edebali S (ed) Advanced sorption process applications. IntechOpen, London
Deykun I, Halysh V, Barbash V (2018) Rapeseed straw as an alternative for pulping and papermaking. Cellulose Chem Technol 52(9–10):833–839
Dias OAT, Konar S, Leão AL, Yang W, Tjong J, Sain M (2020) Current stateof applications of nanocellulose in flexible energy and electronic devices. Front Chem. https://doi.org/10.3389/fchem.2020.00420
Esmaeil MHK, Talaeipour M, Bazyar B, Mirshokraei SA, Eslam HK (2019) Two-step delignification of peracetic acid and alkali from sugar cane bagasse. BioResources 14(4):9994–10003
Feng X, Zhao Y, Jiang Y, Miao M, Cao S, Fang J (2017) Use of carbon dots to enhance UV-blocking of transparent nanocellulose films. Carbohyd Polym 161:253–260. https://doi.org/10.1016/j.carbpol.2017.01.030
Gopakumar DA, Arumughan V, Pasquini D, Leu B, Thomas S (2019) Nanocellulose-based membranes for water purification. Nanoscale Mater Water Purif. https://doi.org/10.1016/b978-0-12-813926-4.00004-5
Hirota M, Tamura N, Saito T, Isogai A (2010) Water dispersion of cellulose II nanocrystals prepared by TEMPO mediated-oxidation of mercerized cellulose at pH 4.8. Cellulose 17:279–288
Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES (2017) Effect of delignification on the physical, thermal, chemical, and structural properties of sugar palm fibre. BioResources 12(4):8734–8754
Isogai A (2018) Development of completely dispersed cellulose nanofibers. Proc Jpn Acad Ser B 94:161–178. https://doi.org/10.2183/pjab.94.012
Jahan MS, Rumee JN, Rahman MM, Quaiyyum A (2014) Formic acid/acetic acid/water pulping of agricultural wastes. Cellul Chem Technol 48(1–2):111–118
Jambeck JR, Andrady A, Geyer R, Narayan R, Perryman M, Siegler T, Wilcox C, Lavender LK (2015) Plastic wasteinputs from land into the ocean. Science 347:768–771
Jasmani L, Thielemans W (2018) Preparation of nanocellulose and its potential application. For Res 7:1–8. https://doi.org/10.4172/2168-9776.1000222
Kargarzadeh H, Ioelovich M, Ahmad I, Thomas S, Dufresne A (2017) Methods for extraction of nanocellulosefrom various sources. In: Kargarzadeh H, Ioelovich M, Ahmad I, Thomas S, Dufresne A (eds) Handbook of nanocellulose and cellulosenanocomposites. Wiley, Weinheim, pp 1–49
Klemm D, Heublein B, Fink H-P, Boh A (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44:3358–3393. https://doi.org/10.1002/anie.200460587
Kumar R, Huc F, Hubbell CA, Ragauskas AJ, Wyman CE (2013) Comparison of laboratory delignification methods, their selectivity, and impacts on physiochemical characteristics of cellulosic biomass. Biores Technol 130:372–381. https://doi.org/10.1016/j.biortech.2012.12.028
Levanič J, Šenk VP, Nadrah P, Poljanšek I, Oven P, Haapala A (2020) Analyzing TEMPO-oxidized cellulose fiber morphology: new insights into optimization of the oxidation process and nanocellulose dispersion quality. ACS Sustain Chem Eng 8(48):17752–17762. https://doi.org/10.1021/acssuschemeng.0c05989
Long L, Tian D, Hu J, Wang F, Saddler J (2017) A xylanase-aided enzymatic pretreatment facilitates cellulose nanofibrillation. Bioresour Technol 243:898–904. https://doi.org/10.1016/j.biortech.2017.07.037
Lu P, Liu R, Liu X, Wu M (2018) Preparation of self-supporting bagasse cellulose nanofibrils hydrogels induced by zinc ions. Nanomaterials 8:800. https://doi.org/10.3390/nano8100800
Madivoli ES, Kareru PG, Gachanja AN, Mugo SM, Sujee DM, Fromm KM (2020) Isolation of cellulose nanofibers from oryzasativa residues via tempo mediated oxidation. J Nat Fibers. https://doi.org/10.1080/15440478.2020.1764454
Mahmud MM, Asma M, Asma P, Perveen A, Jahan RA, Arafat MT (2019) Preparation of different polymorphs of cellulose from different acid hydrolysis medium. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2019.03.027
Milanovich J, Kostic M, Skundric P (2012) Strucrure and properties of TEMPO-oxidized cotton fibers. Chem Ind Chem Eng Q 18(3):473–481
Naz S, Ali JS, Zia M (2019) Nanocellulose isolation characterization and applications: a journey from non-remedial to biomedical claims. Bio-Des Manuf. https://doi.org/10.1007/s42242-019-00049-4
Paschoal G, Muller CM, Carvalho GM, Tischera CA, Malia S (2015) Isolation and characterization of nanofibrillated cellulose from oat hulls. Quim Nova 38(4):478–482. https://doi.org/10.5935/0100-4042.20150029
Patiño-Masó J, Serra-Parareda F, Tarrés Q, Mutjé P, Espinach FX, Delgado-Aguilar M (2019) TEMPO-oxidized cellulose nanofibers: a potential bio-based superabsorbent for diaper production. Nanomaterials 9:1271. https://doi.org/10.3390/nano9091271
Phanthong P, Reubroycharoen P, Hao X, Xu G, Abudula G, Guan G (2018) Nanocellulose: extraction and application. Carbon Resour Convers 1:32–44
Plermjai K, Boonyarattanakalin K, Mekprasart W, Pavasupree S, Phoohinkong W, Pecharapa W (2010) Extraction and characterization of nanocellulose from sugarcane bagasse by ball-milling-assisted acid hydrolysis. AIP Conf Proc. https://doi.org/10.1063/1.5053181
Rol F, Belgacem MN, Gandini A, Bras J (2019) Recent advances in surfacemodified cellulose nanofibrils. Prog Polym Sci 88:241–264. https://doi.org/10.1016/j.progpolymsci.2018.09.002
Saberikhan E, Rovsseh JM, Rezayati-Charani P (2011) Organosolv pulping of wheat straw by glycerol. Cellul Chem Technol 45(1–2):67–75
Saltonstall K (2002) Cryptic invasion by a non-native genotype of thecommon reed, phragmites australis, into North America. PNAS 99(4):2445–2449. https://doi.org/10.1073/pnas.032477999
De Santi V, Cardellini F, Brinchi L, Germani R (2012) Novel bronsted acidic deep eutectic solvents as reaction media for esterification of carboxylic acid with alcohols. Tetrahedron Lett 53(38):5151–5155
Sánchez R, Espinosaa E, Domínguez-Roblesa J, Mauricio Loaiza J, Rodrígueza A (2016) Isolation and characterization of lignocellulose nanofibers from different wheat straw pulps. Int J Biol Macromol 92:1025–1033. https://doi.org/10.1016/j.ijbiomac.2016.08.019
Schmidt C, Krauth T, Wagner S (2017) Export of plastic debris by rivers into the sea. Environ Sci Technol 51(21):12246–12253 (Bibcode:2017EnST...5112246S)
Segal LC, Creely JJr, Martin AEJ, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29(10):786–794. https://doi.org/10.1177/004051755902901003
Seta FT, Ana X, Liua L, Zhanga H, Yanga J, Zhanga W (2020) Preparation and characterization of high yield cellulose nanocrystals (CNC) derived from ball mill pretreatment and maleic acid hydrolysis. Carbohyd Polym 234:115942. https://doi.org/10.1016/j.carbpol.2020.115942
Shaghaleh H, Xu X, Wang S (2018) Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives. RSC Adv 8:825–842. https://doi.org/10.1039/C7RA11157F
Shak KPY, Pang YL, Mah SK (2018) Nanocellulose: recent advances and its prospects in environmental remediation. Beilstein J Nanotechnol 9:2479–2498. https://doi.org/10.3762/bjnano.9.232
Sharma A, Thakur M, Bhattacharya M, Mandal T, Goswamia S (2019) Commercial application of cellulose nano-composites—a review. Biotechnol Rep. https://doi.org/10.1016/j.btre.2019.e00316
Sosiati H, Wijayanti DA, Triyana K, Kamiel B (2017) Morphology and crystallinity of sisal nanocellulose after sonication. AIP Conf Proc 1877:030003–1-030003–7
Sun X, Wu Q, Ren S, Lei T (2015) Comparison of highly transparent all-cellulose nanopaper prepared using sulfuric acid and TEMPO-mediated oxidation methods. Cellulose 22(2):1123–1133. https://doi.org/10.1007/s10570-015-0574-6
Thomas B, Raj MC, Athira KB, Rubiyah MH, Joy J, Moores A, Drisko GL, Sanchez C (2018) Nanocellulose, a versatile green platform: from biosources to materials and their applications. Chem Rev 118(24):11575–11625. https://doi.org/10.1021/acs.chemrev.7b00627
Torlopov MA, Mikhaylov VI, Udoratina EV, Aleshina LA, Prusskii AI, Tsvetkov NV, Krivoshapkin PV (2017) Cellulose nanocrystals with different length-to-diameter ratios extracted from various plants using novel system acetic acid/phosphotungstic acid/octanol-1. Cellulose 25(2):1031–1046. https://doi.org/10.1007/s10570-017-1624-z
Trache D, Tarchoun AF, Derradji M, Hamidon TS, Masruchin N, Brosse N, Hussin MH (2020) Nanocellulose: from fundamentals to advanced applications. Front Chem 8:392. https://doi.org/10.3389/fchem.2020.00392
Vurasko AV, Glukhikh VV, Simonova EI, Minakova AR (2018) Statistic simulation of the delignification process. In: Proceedings of the annual scientific international conference Nizhniy Tagil, Russia, 4 May 2018, pp 7–16
Yang Y, Chen Z, Zhang J, Wang G, Zhang R, Suo D (2019) Preparation and applications of the cellulose nanocrystals. Int J Polym Sci. https://doi.org/10.1155/2019/1767028
Zhanga Y, Haoa N, Lina X, Niea S (2020) Emerging challenges in the thermal management of cellulose nanofibrilbased supercapacitors, lithium-ion batteries and solar cells: a review. Carbohyd Polym 234:115888. https://doi.org/10.1016/j.carbpol.2020.115888
Zhu H, Parvinian S, Preston C, Vaaland O, Ruan Z, Hu L (2013) Transparent nanopaper with tailored optical properties. Nanoscale 5:3787–3792
Acknowledgements
The authors are grateful to the Ministry of Education and Science of Ukraine for funding the work and express their sincere gratitude to Dr. Natalia Klochko and colleagues from NTU "Kharkiv Polytechnic Institute" and V. N. Karazin Kharkiv National University for assistance in TEM and XRD investigations.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Barbash, V.A., Yashchenko, O.V., Gondovska, A.S. et al. Preparation and characterization of nanocellulose obtained by TEMPO-mediated oxidation of organosolv pulp from reed stalks. Appl Nanosci 12, 835–848 (2022). https://doi.org/10.1007/s13204-021-01749-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13204-021-01749-z