Abstract
The effects of feed moisture content (14, 17 and 20% db), die temperature (120, 145 and 170 °C) and carrot pomace content (10, 17.5 and 25%) on the sectional expansion index, hardness, porosity, micro and macro structure and sensory properties of high fiber expanded barley–carrot pomace snack were investigated using a central composite design. Results showed that with increasing the moisture content the hardness of the extruded snacks increased while their expansion ratio decreased. The hardness decreased with increasing the die temperature, but the expansion ratio increased with increasing the die temperatures to up to 145 °C and decreased afterwards. An increase in carrot pomace content decreased the expansion ratio and cell average size while the hardness and cell wall thickness increased. The optimum condition for production of expanded barley–carrot pomace snack was 10% carrot pomace content, 142.7 °C die temperature and 14.02% moisture content. During extrusion cooking, the soluble dietary fiber of barley–carrot pomace snack increased, but no change on the total dietary fiber content was observed. Therefore, the extruded snacks prepared from barley flour and carrot pomace had high nutritional value.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Alam S, Kumar S (2014) Optimization of extrusion process parameters for red lentil-carrot pomace incorporated ready-to-eat expanded product using response surface. Food Sci Technol 2(7):106–119. https://doi.org/10.13189/fst.2014.020703
Alam MS, Pathania S, Sharma A (2016) Optimization of the extrusion process for development of high fibre soybean-rice ready-to-eat snacks using carrot pomace and cauliflower trimmings. LWT Food Sci Technol 74:135–144. https://doi.org/10.1016/j.lwt.2016.07.031
Altan A, Mccarthy KL, Maskan M (2008a) Evaluation of snack foods from barley–tomato pomace blends by extrusion processing. J Food Eng 84:231–242
Altan A, Mccarthy KL, Maskan M (2008b) Extrusion cooking of barley flour and process parameter optimization by using response surface methodology. J Sci Food Agric. https://doi.org/10.1002/jsfa
Altan A, Mccarthy KL, Maskan M (2008c) Twin-screw extrusion of barley–grape pomace blends: extrudate characteristics and determination of optimum processing conditions. J Food Eng 89:24–32
Alu’datt MH, Rababah T, Ereifej K, Alli I, Alrababah MA, Almajwal A, Alhamad MN (2012) Effects of barley flour and barley protein isolate on chemical, functional, nutritional and biological properties of Pita bread. Food Hydrocoll 26(1):135–143. https://doi.org/10.1016/j.foodhyd.2011.04.018
AOAC (2000) Official methods of analysis of AOAC international. AOAC, Arlington
Chang C, Yang C, Samanros A, Lin J (2015) Collet and cooking extrusion change the soluble and insoluble β-glucan contents of barley. J Cereal Sci 66:18–23. https://doi.org/10.1016/j.jcs.2015.09.005
Chau C, Chen C, Lee M (2004) Comparison of the characteristics, functional properties, and in vitro hypoglycemic effects of various carrot insoluble fiber-rich fractions. Lebensm-Wiss U-Technol 37:155–160
Ding Q, Ainsworth P, Tucker G, Marson H (2005) The effect of extrusion conditions on the physicochemical properties and sensory characteristics of rice-based expanded snacks. J Food Eng 66:283–289
Ding Q, Ainsworth P, Plunkett A, Tucker G, Marson H (2006) The effect of extrusion conditions on the functional and physical properties of wheat-based expanded snacks. J Food Eng 73:142–148
Ganjyal GM, Reddy N, Yang YQ, Hanna MA (2004) Biodegradable packaging foams of starch acetate blended with corn stalk fibers. J Appl Polym Sci 93:2627–2633
Hashemi N, Mortazavi SA, Milani E, Tabatabai Yazdi F (2017) Microstructural and textural properties of puffed snack prepared from partially deffated almond powder and corn flour. J Food Process Preserv. https://doi.org/10.1111/jfpp.13210
Huang YL, Ma YS (2016) The effect of extrusion processing on the physiochemical properties of extruded orange pomace. Food Chem 192:363–369. https://doi.org/10.1016/j.foodchem.2015.07.039
Koocheki A, Taherian AR, Razavi SMA, Bostan A (2009) Response surface methodology for optimization of extraction yield, viscosity, hue and emulsion stability of mucilage extracted from Lepidium perfoliatum seeds. Food Hydrocoll 23(8):2369–2379. https://doi.org/10.1016/j.foodhyd.2009.06.014
Lazou A, Krokida M, Tzia C (2010) Sensory properties and acceptability of corn and lentil extruded puffs. J Sens Stud 25(6):838–860. https://doi.org/10.1111/j.1745-459X.2010.00308.x
Li H, Long D, Peng J, Ming J, Zhao G (2012) A novel in situ enhanced blasting extrusion technique- Extrudate analysis and optimization of processing conditions with okara. Innov Food Sci Emerg Technol 16:80–88. https://doi.org/10.1016/j.ifset.2012.04.009
Liu Y, Hsieh F, Heymann H, Huuff HE (2000) Effect of process conditions on the physical and sensory properties of extruded oat–corn puff. J Food Sci 65:7
Mendonça S, Grossmann MVE, Verhe R (2000) Corn bran as a fibre source in expanded snacks. Lebensm-Wiss U-Technol 33:2–8
Moraru CI, Kokini JL (2003) Nucleation and expansion during extrusion and microwave heating of cereal foods. Compr Rev Food Sci Food Saf 2(4):147–165. https://doi.org/10.1111/j.1541-4337.2003.tb00020.x
Naji-Tabasi S, Mohebbi M (2014) Evaluation of cress seed gum and xanthan gum effect on macrostructure properties of gluten-free bread by image processing. J Food Meas Charact 9(1):110–119. https://doi.org/10.1007/s11694-014-9216-1
O’Shea N, Arendt E, Gallagher E (2013) Enhancing an extruded puffed snack by optimising die head temperature, screw speed and apple pomace inclusion. Food Bioprocess Technol. https://doi.org/10.1007/s11947-013-1181-x
Özer EA, Ibanoğlu Ş, Ainsworth P, Yağmur C (2004) Expansion characteristics of a nutritious extruded snack food using response surface methodology. Eur Food Res Technol 218:474–479
Potter R, Stojceska V, Plunkett A (2013) The use of fruit powders in extruded snacks suitable for Children’s diets. LWT-FoodSci Technol 51(2):537–544. https://doi.org/10.1016/j.lwt.2012.11.015
Rodríguez-Miranda J, Ruiz-López II, Herman-Lara E, Martínez-Sánchez CE, Delgado-Licon E, Vivar-Vera MA (2011) Development of extruded snacks using taro (Colocasia esculenta) and nixtamalized maize (Zea mays) flour blends. LWT Food Sci Technol 44(3):673–680. https://doi.org/10.1016/j.lwt.2010.06.036
Saeleaw M, Dürrschmid K, Schleining G (2012) The effect of extrusion conditions on mechanical-sound and sensory evaluation of rye expanded snack. J Food Eng 110(4):532–540
Stojceska V, Ainsworth P, Plunkett A, Ibanog E (2008) Cauliflower by-products as a new source of dietary fibre, antioxidants and proteins in cereal based ready-to-eat expanded snacks. J Food Eng 87:554–563. https://doi.org/10.1016/j.jfoodeng.2008.01.009
Stojceska V, Ainsworth P, Plunkett A, Ibanoğlu Ş (2010) The advantage of using extrusion processing for increasing dietary fibre level in gluten-free products. Food Chem 121:156–164
Yanniotis S, Petraki A, Soumpasi E (2007) Effect of pectin and wheat fibers on quality attributes of extruded cornstarch. J Food Eng 80:594–599
Yao N, Jannink JL, Alavi S, White PJ (2006) Physical and sensory characteristics of extruded products made from two oat lines with different β-glucan concentrations. Cereal Chem 83(6):692–699. https://doi.org/10.1094/CC-83-0692
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lotfi Shirazi, S., Koocheki, A., Milani, E. et al. Production of high fiber ready-to-eat expanded snack from barley flour and carrot pomace using extrusion cooking technology. J Food Sci Technol 57, 2169–2181 (2020). https://doi.org/10.1007/s13197-020-04252-5
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13197-020-04252-5